Influence of the Second Flexural Mode on the Response of High-Speed Bridges

This paper deals with the assessment of the contribution of the second flexural mode to the dynamic behaviour of simply supported railway bridges. Alluding to the works of other authors, it is suggested in some references that the dynamic behaviour of simply supported bridges could be adequately represented taking into account only the contribution of the fundamental flexural mode. On the other hand, the European Rail Research Institute (ERRI) proposes that the second mode should also be included whenever the associated natural frequency is lower than 30 Hz]. This investigation endeavours to clarify the question as much as possible by establishing whether the maximum response of the bridge, in terms of displacements, accelerations and bending moments, can be computed accurately not taking account of the contribution of the second mode. To this end, a dimensionless formulation of the equations of motion of a simply supported beam traversed by a series of equally spaced moving loads is presented. This formulation brings to light the fundamental parameters governing the behaviour of the beam: damping ratio, dimensionless speed $ \alpha$=VT/L, and L/d ratio (L stands for the span of the beam, V for the speed of the train, T represents the fundamental period of the bridge and d symbolises the distance between consecutive loads). Assuming a damping ratio equal to 1%, which is a usual value for prestressed high-speed bridges, a parametric analysis is conducted over realistic ranges of values of $ \alpha$ and L/d. The results can be extended to any simply supported bridge subjected to a train of equally spaced loads in virtue of the so-called Similarity Formulae. The validity of these formulae can be derived from the dimensionless formulation mentioned above. In the parametric analysis the maximum response of the bridge is obtained for one thousand values of speed that cover the range from the fourth resonance of the first mode to the first resonance of the second mode. The response at twenty-one different locations along the span of the beam is compared in order to decide if the maximum can be accurately computed with the sole contribution of the fundamental mode.

Effects of Conservation Interventions on the Archaeological Roman Site of Merida (Spain). Advance of Research

Efectos derivados de tratamientos de conservación y restauración sobre material inorgánico en yacimientos arqueológicos. Caso de estudio: Mérida.

Simulation of Temperatures and Stresses during Construction of a RCC Dam

Se describen las variaciones de temperaturas y de tensiones durante la construcción de presas de hormigón compactado. The curing of concrete is an exothermic process. The heat of hydration generated induces temperature increases in the concrete, which will disappear in the long term by heat conduction in the concrete mass and thermal exchanges with the environment. The problem is of particularly interest for large concrete masses, as is the case of dams, because the time involved in the heat diffusion process grows with the square of the dimensions and a hotter dam interior implies the possibility of cracking the exposed surfaces of the dam. The Cuira dam, currently being built in Venezuela using roller compacted concrete, is a 134 m high, arch-gravity dam. In support of the design, different strategies were analysed, including various combinations of cooling of the water and the aggregate in order to achieve acceptable results. The calculations were conducted with Abaqus, taking into account all the necessary mechanical and thermal characteristics, as well as the relevant non-linearities. The analyses led to the conclusion that no cooling was required, even taking into account the stress state imposed by an early and rapid filling of the reservoir.

Influence of the semantic content of urban sounds in the identity of outer spaces

This paper shows the influence of the semantic content of urban sounds in the subjective evaluation of outer spaces. The study is based on the analysis conducted in three neighboring and integrated urban spaces with a different form of social ownership in the city of Cordoba, Argentina. It shows that the type of sound source present at each site influence, by its semantic content, in the user´s identification and permanence in the place. The noise present in a soundscape is able to have a high semantic content, and therefore the sound has a particular meaning for the perceiver. Every particular social group influences the production of their own sounds and how they perceive them. This allows to consider the sound as one of the factors that define the sense of "place" or "no place" of a certain urban space. Evidently the sounds, and their ability to evoke and characterize the environment, cannot be ignored in the construction and recovery of anthropological sites. This urban culture is unique and specific to every society. Thepublic spaces, with their soundscape, are part of the construction of the urban identity of a city. It is shown that for identical general sound levels present in each of the spaces, the level of annoyance or discomfort, in relation to the subjective acoustic quality, is different. This is the result of the influence of semantic content of the sounds present in each urban space. Coinciding with other similar research, the level of discomfort or annoyance decreases as the presence of natural sounds such as water, the wind in the trees or the birds singing increases, even when the objective values of noise level of natural sounds are higher.

Reliability of tunnel liners

The possibility of application of structural reliability theory to the computation of the safety margins of excavated tunnels is presented. After a brief description of the existing procedures the limitations of the safety coefficients such as they usually defined, the proposed limit states are precised as well as the random variables and the applied methodology. Also presented are simple examples, some of them based in actual cases, and to end, some conclusions are established the most important one being the probability of using the method to solve the inverse problem of identification.

Chamber of valves in the Arenoso reservoir

Of the south of Spain, near the province of Cordova, in a tributary of the Guadalquivir River it has been constructed during the years 2004 to 2007 the reservoir called El Arenoso. El Arenoso reservoir that belongs to Environment Ministry is destined to downstream Guadalquivir’s water supply and the general regulation of the river. The dam is located on the same name river and it is next to the Montoro’s municipal district, 41 km northeast of Cordova. The main work consists on an embankment dam, with central clay core, and slates and greywacke shoulders. The core is covered downstream with a filter material and upstream with a transition material. The dimensions of the dam are 80 m high, 1.480 m long at its crest, and it has been needed more than 3 million m3 of materials, creating a waterproof barrier able to keep 160 hm3 as a useful reservoir. In the zone of the core is located the chamber of valves with a horizontal clearance of 10 m and a vertical clearance of 14,517 m. The present article exposes the most important characteristics of project and construction, of valves chamber of the Arenoso reservoir.

Vibrations of Short Span Railway Bridges for High Speed Lines

The physical model based on moving constant loads is widely used for the analysis of railway bridges. Nevertheless, this model is not well-suited for the study of short span bridges (L<=15-20 m), and the results it produces (displacements and accelerations) are much greater than those obtained experimentally. In this paper two factors are analysed which are believed to have an influence in the dynamic behaviour of short bridges. These two factors are not accounted for by the moving loads model and are the following: the distribution of the loads due to the presence of the sleepers and ballast layer, and the train-bridge interaction. Several numerical simulations have been performed in order to decide on their influence, and the results are presented and discussed herein.

Study of the Edge and Surface Cracks Influence in the Mechanical Strength of Silicon Wafers

The objective of the present study is the estimation of the depth to which the wire sawing process causes damage to the wafer surfaces. Previous analyses were carried out by means of the four line bending test. The characteristic of this test implied that the failure could be due to surface cracks located in the central zone of the wafer or near the edges. In order to evaluate the influence of the edge or surface cracks a new study has been carried out using the ball/ring on ring test. Description and results of the tests are presented. The preliminary analysis of the failure stress using analytical methods confirms the expected results. A Finite Element model developed to get more information of the test results is also presented.

Discussion of "Bibliography and Data on Cable-Stayed Bridges", by the Subcommittee on Cable-Stayed Bridges of the Committee on Long-Span Steel Bridges of the Committee on Metals of the Structural Division (Oct., 1977)

The writer would like to point out the existence of a very remarkable Spanish cable-stayed bridge built in 1925, wich is thus older than the first one recorded by the authors (and probably the pioneer in concrete-deck type). The Tempul Aqueduct was designed by the famous Professor Educardo Torroja. The deck is a concrete box girder sustained by two planes of 3 mm diam 37-wire double cables working at 27 kg/mm2.

Diseño de una interfaz de representación gráfica de la base de datos de HRTF

El actual proyecto consiste en la creación de una interfaz gráfica de usuario (GUI) en entorno de MATLAB que realice una representación gráfica de la base de datos de HRTF (Head-Related Transfer Function). La función de transferencia de la cabeza es una herramienta muy útil en el estudio de la capacidad del ser humano para percibir su entorno sonoro, además de la habilidad de éste en la localización de fuentes sonoras en el espacio que le rodea. La HRTF biaural (terminología para referirse al conjunto de HRTF del oído izquierdo y del oído derecho) en sí misma, posee información de especial interés ya que las diferencias entre las HRTF de cada oído, conceden la información que nuestro sistema de audición utiliza en la percepción del campo sonoro. Por ello, la funcionalidad de la interfaz gráfica creada presenta gran provecho dentro del estudio de este campo. Las diferencias interaurales se caracterizan en amplitud y en tiempo, variando en función de la frecuencia. Mediante la transformada inversa de Fourier de la señal HRTF, se obtiene la repuesta al impulso de la cabeza, es decir, la HRIR (Head-Related Impulse Response). La cual, además de tener una gran utilidad en la creación de software o dispositivos de generación de sonido envolvente, se utiliza para obtener las diferencias ITD (Interaural Time Difference) e ILD (Interaural Time Difference), comúnmente denominados “parámetros de localización espacial”. La base de datos de HRTF contiene la información biaural de diferentes puntos de ubicación de la fuente sonora, formando una red de coordenadas esféricas que envuelve la cabeza del sujeto. Dicha red, según las medidas realizadas en la cámara anecoica de la EUITT (Escuela Universitaria de Ingeniería Técnica de Telecomunicación), presenta una precisión en elevación de 10º y en azimut de 5º. Los receptores son dos micrófonos alojados en el maniquí acústico llamado HATS (Hats and Torso Simulator) modelo 4100D de Brüel&Kjaer. Éste posee las características físicas que influyen en la percepción del entorno como son las formas del pabellón auditivo (pinna), de la cabeza, del cuello y del torso humano. Será necesario realizar los cálculos de interpolación para todos aquellos puntos no contenidos en la base de datos HRTF, este proceso es sumamente importante no solo para potenciar la capacidad de la misma sino por su utilidad para la comparación entre otras bases de datos existentes en el estudio de este ámbito. La interfaz gráfica de usuario está concebida para un manejo sencillo, claro y predecible, a la vez que interactivo. Desde el primer boceto del programa se ha tenido clara su filosofía, impuesta por las necesidades de un usuario que busca una herramienta práctica y de manejo intuitivo. Su diseño de una sola ventana reúne tanto los componentes de obtención de datos como los que hacen posible la representación gráfica de las HRTF, las HRIR y los parámetros de localización espacial, ITD e ILD. El usuario podrá ir alternando las representaciones gráficas a la vez que introduce las coordenadas de los puntos que desea visualizar, definidas por phi (elevación) y theta (azimut). Esta faceta de la interfaz es la que le otorga una gran facilidad de acceso y lectura de la información representada en ella. Además, el usuario puede introducir valores incluidos en la base de datos o valores intermedios a estos, de esta manera, se indica a la interfaz la necesidad de realizar la interpolación de los mismos. El método de interpolación escogido es el de la ponderación de la distancia inversa entre puntos. Dependiendo de los valores introducidos por el usuario se realizará una interpolación de dos o cuatro puntos, siendo éstos limítrofes al valor introducido, ya sea de phi o theta. Para añadir versatilidad a la interfaz gráfica de usuario, se ha añadido la opción de generar archivos de salida en forma de imagen de las gráficas representadas, de tal forma que el usuario pueda extraer los datos que le interese para cualquier valor de phi y theta. Se completa el presente proyecto fin de carrera con un trabajo de investigación y estudio comparativo de la función y la aplicación de las bases de datos de HRTF dentro del marco científico y de investigación. Esto ha hecho posible concentrar información relacionada a través de revistas científicas de investigación como la JAES (Journal of the Audio Engineering Society) o la ASA (Acoustical Society of America), además, del IEEE ( Institute of Electrical and Electronics Engineers) o la “Web of knowledge” entre otras. Además de realizar la búsqueda en estas fuentes, se ha optado por vías de información más comunes como Google Académico o el portal de acceso “Ingenio” a los todos los recursos electrónicos contenidos en la base de datos de la universidad. El estudio genera una ampliación en el conocimiento de la labor práctica de las HRTF. La mayoría de los estudios enfocan sus esfuerzos en mejorar la percepción del evento sonoro mediante su simulación en la escucha estéreo o multicanal. A partir de las HRTF, esto es posible mediante el análisis y el cálculo de datos como pueden ser las regresiones, siendo éstas muy útiles en la predicción de una medida basándose en la información de la actual. Otro campo de especial interés es el de la generación de sonido 3D. Mediante la base de datos HRTF es posible la simulación de una señal biaural. Se han diseñado algoritmos que son implementados en dispositivos DSP, de tal manera que por medio de retardos interaurales y de diferencias espectrales es posible llegar a un resultado óptimo de sonido envolvente, sin olvidar la importancia de los efectos de reverberación para conseguir un efecto creíble de sonido envolvente. Debido a la complejidad computacional que esto requiere, gran parte de los estudios coinciden en desarrollar sistemas más eficientes, llegando a objetivos tales como la generación de sonido 3D en tiempo real. ABSTRACT. This project involves the creation of a Graphic User Interface (GUI) in the Matlab environment which creates a graphic representation of the HRTF (Head-Related Transfer Function) database. The head transfer function is a very useful tool in the study of the capacity of human beings to perceive their sound environment, as well as their ability to localise sound sources in the area surrounding them. The binaural HRTF (terminology which refers to the HRTF group of the left and right ear) in itself possesses information of special interest seeing that the differences between the HRTF of each ear admits the information that our system of hearing uses in the perception of each sound field. For this reason, the functionality of the graphic interface created presents great benefits within the study of this field. The interaural differences are characterised in space and in time, varying depending on the frequency. By means of Fourier's transformed inverse of the HRTF signal, the response to the head impulse is obtained, in other words, the HRIR (Head-Related Impulse Response). This, as well as having a great use in the creation of software or surround sound generating devices, is used to obtain ITD differences (Interaural Time Difference) and ILD (Interaural Time Difference), commonly named “spatial localisation parameters”. The HRTF database contains the binaural information of different points of sound source location, forming a network of spherical coordinates which surround the subject's head. This network, according to the measures carried out in the anechoic chamber at the EUITT (School of Telecommunications Engineering) gives a precision in elevation of 10º and in azimuth of 5º. The receivers are two microphones placed on the acoustic mannequin called HATS (Hats and Torso Simulator) Brüel&Kjaer model 4100D. This has the physical characteristics which affect the perception of the surroundings which are the forms of the auricle (pinna), the head, neck and human torso. It will be necessary to make interpolation calculations for all those points which are not contained the HRTF database. This process is extremely important not only to strengthen the database's capacity but also for its usefulness in making comparisons with other databases that exist in the study of this field. The graphic user interface is conceived for a simple, clear and predictable use which is also interactive. Since the first outline of the program, its philosophy has been clear, based on the needs of a user who requires a practical tool with an intuitive use. Its design with only one window unites not only the components which obtain data but also those which make the graphic representation of the HRTFs possible, the hrir and the ITD and ILD spatial location parameters. The user will be able to alternate the graphic representations at the same time as entering the point coordinates that they wish to display, defined by phi (elevation) and theta (azimuth). The facet of the interface is what provides the great ease of access and reading of the information displayed on it. In addition, the user can enter values included in the database or values which are intermediate to these. It is, likewise, indicated to the interface the need to carry out the interpolation of these values. The interpolation method is the deliberation of the inverse distance between points. Depending on the values entered by the user, an interpolation of two or four points will be carried out, with these being adjacent to the entered value, whether that is phi or theta. To add versatility to the graphic user interface, the option of generating output files in the form of an image of the graphics displayed has been added. This is so that the user may extract the information that interests them for any phi and theta value. This final project is completed with a research and comparative study essay on the function and application of HRTF databases within the scientific and research framework. It has been possible to collate related information by means of scientific research magazines such as the JAES (Journal of the Audio Engineering Society), the ASA (Acoustical Society of America) as well as the IEEE (Institute of Electrical and Electronics Engineers) and the “Web of knowledge” amongst others. In addition to carrying out research with these sources, I also opted to use more common sources of information such as Academic Google and the “Ingenio” point of entry to all the electronic resources contained on the university databases. The study generates an expansion in the knowledge of the practical work of the HRTF. The majority of studies focus their efforts on improving the perception of the sound event by means of its simulation in stereo or multichannel listening. With the HRTFs, this is possible by means of analysis and calculation of data as can be the regressions. These are very useful in the prediction of a measure being based on the current information. Another field of special interest is that of the generation of 3D sound. Through HRTF databases it is possible to simulate the binaural signal. Algorithms have been designed which are implemented in DSP devices, in such a way that by means of interaural delays and wavelength differences it is possible to achieve an excellent result of surround sound, without forgetting the importance of the effects of reverberation to achieve a believable effect of surround sound. Due to the computational complexity that this requires, a great many studies agree on the development of more efficient systems which achieve objectives such as the generation of 3D sound in real time.

Core physics and safety analysis of Generation-IV Sodium Fast Reactors using existing and newly developed computational tools

El futuro de la energía nuclear de fisión dependerá, entre otros factores, de la capacidad que las nuevas tecnologías demuestren para solventar los principales retos a largo plazo que se plantean. Los principales retos se pueden resumir en los siguientes aspectos: la capacidad de proporcionar una solución final, segura y fiable a los residuos radiactivos; así como dar solución a la limitación de recursos naturales necesarios para alimentar los reactores nucleares; y por último, una mejora robusta en la seguridad de las centrales que en definitiva evite cualquier daño potencial tanto en la población como en el medio ambiente como consecuencia de cualquier escenario imaginable o más allá de lo imaginable. Siguiendo estas motivaciones, la Generación IV de reactores nucleares surge con el compromiso de proporcionar electricidad de forma sostenible, segura, económica y evitando la proliferación de material fisible. Entre los sistemas conceptuales que se consideran para la Gen IV, los reactores rápidos destacan por su capacidad potencial de transmutar actínidos a la vez que permiten una utilización óptima de los recursos naturales. Entre los refrigerantes que se plantean, el sodio parece una de las soluciones más prometedoras. Como consecuencia, esta tesis surgió dentro del marco del proyecto europeo CP-ESFR con el principal objetivo de evaluar la física de núcleo y seguridad de los reactores rápidos refrigerados por sodio, al tiempo que se desarrollaron herramientas apropiadas para dichos análisis. Efectivamente, en una primera parte de la tesis, se abarca el estudio de la física del núcleo de un reactor rápido representativo, incluyendo el análisis detallado de la capacidad de transmutar actínidos minoritarios. Como resultado de dichos análisis, se publicó un artículo en la revista Annals of Nuclear Energy [96]. Por otra parte, a través de un análisis de un hipotético escenario nuclear español, se evalúo la disponibilidad de recursos naturales necesarios en el caso particular de España para alimentar una flota específica de reactores rápidos, siguiendo varios escenarios de demanda, y teniendo en cuenta la capacidad de reproducción de plutonio que tienen estos sistemas. Como resultado de este trabajo también surgió una publicación en otra revista científica de prestigio internacional como es Energy Conversion and Management [97]. Con objeto de realizar esos y otros análisis, se desarrollaron diversos modelos del núcleo del ESFR siguiendo varias configuraciones, y para diferentes códigos. Por otro lado, con objeto de poder realizar análisis de seguridad de reactores rápidos, son necesarias herramientas multidimensionales de alta fidelidad específicas para reactores rápidos. Dichas herramientas deben integrar fenómenos relacionados con la neutrónica y con la termo-hidráulica, entre otros, mediante una aproximación multi-física. Siguiendo este objetivo, se evalúo el código de difusión neutrónica ANDES para su aplicación a reactores rápidos. ANDES es un código de resolución nodal que se encuentra implementado dentro del sistema COBAYA3 y está basado en el método ACMFD. Por lo tanto, el método ACMFD fue sometido a una revisión en profundidad para evaluar su aptitud para la aplicación a reactores rápidos. Durante ese proceso, se identificaron determinadas limitaciones que se discutirán a lo largo de este trabajo, junto con los desarrollos que se han elaborado e implementado para la resolución de dichas dificultades. Por otra parte, se desarrolló satisfactoriamente el acomplamiento del código neutrónico ANDES con un código termo-hidráulico de subcanales llamado SUBCHANFLOW, desarrollado recientemente en el KIT. Como conclusión de esta parte, todos los desarrollos implementados son evaluados y verificados. En paralelo con esos desarrollos, se calcularon para el núcleo del ESFR las secciones eficaces en multigrupos homogeneizadas a nivel nodal, así como otros parámetros neutrónicos, mediante los códigos ERANOS, primero, y SERPENT, después. Dichos parámetros se utilizaron más adelante para realizar cálculos estacionarios con ANDES. Además, como consecuencia de la contribución de la UPM al paquete de seguridad del proyecto CP-ESFR, se calcularon mediante el código SERPENT los parámetros de cinética puntual que se necesitan introducir en los típicos códigos termo-hidráulicos de planta, para estudios de seguridad. En concreto, dichos parámetros sirvieron para el análisis del impacto que tienen los actínidos minoritarios en el comportamiento de transitorios. Concluyendo, la tesis presenta una aproximación sistemática y multidisciplinar aplicada al análisis de seguridad y comportamiento neutrónico de los reactores rápidos de sodio de la Gen-IV, usando herramientas de cálculo existentes y recién desarrolladas ad' hoc para tal aplicación. Se ha empleado una cantidad importante de tiempo en identificar limitaciones de los métodos nodales analíticos en su aplicación en multigrupos a reactores rápidos, y se proponen interesantes soluciones para abordarlas. ABSTRACT The future of nuclear reactors will depend, among other aspects, on the capability to solve the long-term challenges linked to this technology. These are the capability to provide a definite, safe and reliable solution to the nuclear wastes; the limitation of natural resources, needed to fuel the reactors; and last but not least, the improved safety, which would avoid any potential damage on the public and or environment as a consequence of any imaginable and beyond imaginable circumstance. Following these motivations, the IV Generation of nuclear reactors arises, with the aim to provide sustainable, safe, economic and proliferationresistant electricity. Among the systems considered for the Gen IV, fast reactors have a representative role thanks to their potential capacity to transmute actinides together with the optimal usage of natural resources, being the sodium fast reactors the most promising concept. As a consequence, this thesis was born in the framework of the CP-ESFR project with the generic aim of evaluating the core physics and safety of sodium fast reactors, as well as the development of the approppriated tools to perform such analyses. Indeed, in a first part of this thesis work, the main core physics of the representative sodium fast reactor are assessed, including a detailed analysis of the capability to transmute minor actinides. A part of the results obtained have been published in Annals of Nuclear Energy [96]. Moreover, by means of the analysis of a hypothetical Spanish nuclear scenario, the availability of natural resources required to deploy an specific fleet of fast reactor is assessed, taking into account the breeding properties of such systems. This work also led to a publication in Energy Conversion and Management [97]. In order to perform those and other analyses, several models of the ESFR core were created for different codes. On the other hand, in order to perform safety studies of sodium fast reactors, high fidelity multidimensional analysis tools for sodium fast reactors are required. Such tools should integrate neutronic and thermal-hydraulic phenomena in a multi-physics approach. Following this motivation, the neutron diffusion code ANDES is assessed for sodium fast reactor applications. ANDES is the nodal solver implemented inside the multigroup pin-by-pin diffusion COBAYA3 code, and is based on the analytical method ACMFD. Thus, the ACMFD was verified for SFR applications and while doing so, some limitations were encountered, which are discussed through this work. In order to solve those, some new developments are proposed and implemented in ANDES. Moreover, the code was satisfactorily coupled with the thermal-hydraulic code SUBCHANFLOW, recently developed at KIT. Finally, the different implementations are verified. In addition to those developments, the node homogenized multigroup cross sections and other neutron parameters were obtained for the ESFR core using ERANOS and SERPENT codes, and employed afterwards by ANDES to perform steady state calculations. Moreover, as a result of the UPM contribution to the safety package of the CP-ESFR project, the point kinetic parameters required by the typical plant thermal-hydraulic codes were computed for the ESFR core using SERPENT, which final aim was the assessment of the impact of minor actinides in transient behaviour. All in all, the thesis provides a systematic and multi-purpose approach applied to the assessment of safety and performance parameters of Generation-IV SFR, using existing and newly developed analytical tools. An important amount of time was employed in identifying the limitations that the analytical nodal diffusion methods present when applied to fast reactors following a multigroup approach, and interesting solutions are proposed in order to overcome them.

Rehabilitation of two bridges in construction in the motorway M-410 in Madrid (Spain)

Rehabilitation of two bridges in construction in the motorway M-410 in Madrid (Spain)

Influence of temperature and moisture content in Non-destructive values of Scots pine (Pinus sylvestris L.)

Good results evaluating material properties using non-destructive testing (NDT) techniques have been achieved for decades. Several studies to understand the influence of temperature and moisture content on NDT have concluded different effects. In this study, NDT parameters were measured on the principal structural Spanish sawn timber species, Scots pine (Pinus sylvestris L.). NDT were conducted on 216 specimens of nominal dimensions 20 by 20 by 400 mm. Specimens were divided into several groups and studied at six different temperatures and four different moisture contents. Commercial equipment and techniques applied were Sylvatest Duo (ultrasonic wave technique), Steinkamp BPV (ultrasonic wave technique), and Grindo Sonic Mk5 "Industrial" (vibration analysis technique). Differences in NDT values within specimens at different temperatures and moisture contents were obtained. Main results of this study and relationships that describe changes in NDT values by effect of temperature and moisture content are presented.

Modelling of chloride penetration into non-saturated concrete: Case study application for real marine off shore structures

The aim of this paper is to explain the chloride concentration profiles obtained experimentally from control samples of an offshore platform after 25 years of service life. The platform is located 12 km off the coast of the Brazilian province Rio Grande do Norte, in the north-east of Brazil. The samples were extracted at different orientations and heights above mean sea level. A simple model based on Fick’s second law is considered and compared with a finite element model which takes into account transport of chloride ions by diffusion and convection. Results show that convective flows significantly affect the studied chloride penetrations. The convection velocity is obtained by fitting the finite element solution to the experimental data and seems to be directly proportional to the height above mean sea level and also seems to depend on the orientation of the face of the platform. This work shows that considering solely diffusion as transport mechanism does not allow a good prediction of the chloride profiles. Accounting for capillary suction due to moisture gradients permits a better interpretation of the material’s behaviour.

Reliability of tunnel liners

The possibility of application of structural reliability theory to the computation of the safety margins of excavated tunnels is presented. After a brief description of the existing procedures and the limitations of the safety coefficients such as they are usually defined, the proposed limit states are precised as well as the random variables and the applied methodology. Also presented are simple examples, some of them based in actual cases, and to end, some conclusions are established the most important one being the probability of using the method to solve the inverse problem of identification.