Precast Concrete Elements for Accelerated Bridge Construction Final Report Volume 3. Laboratory Testing, Field Testing, and Evaluation of a Precast Concrete Bridge: Black Hawk County,v January 2009

The importance of rapid construction technologies has been recognized by the Federal Highway Administration (FHWA) and the Iowa DOT Office of Bridges and Structures. Black Hawk County (BHC) has developed a precast modified beam-in-slab bridge (PMBISB) system for use with accelerated construction. A typical PMBISB is comprised of five to six precast MBISB panels and is used on low volume roads, on short spans, and is installed and fabricated by county forces. Precast abutment caps and a precast abutment backwall were also developed by BHC for use with the PMBISB. The objective of the research was to gain knowledge of the global behavior of the bridge system in the field, to quantify the strength and behavior of the individual precast components, and to develop a more time efficient panel-to-panel field connection. Precast components tested in the laboratory include two precast abutment caps, three different types of deck panel connections, and a precast abutment backwall. The abutment caps and backwall were tested for behavior and strength. The three panel-to-panel connections were tested in the lab for strength and were evaluated based on cost and constructability. Two PMBISB were tested in the field to determine stresses, lateral distribution characteristics, and overall global behavior.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa: Volume II: Field Testing of Steel Piles in Clay, Sand, and Mixed Soils and Data Analysis, September 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results ofLRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured loaddisplacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

Field Testing and Evaluation of a Demonstration Timber Bridge, February 2012

Asphalt wearing surfaces are commonly used on timber bridges with transverse glued-laminated deck panel systems to help protect the timber components. However, poor performance of these asphalt wearing surfaces in the past has resulted in repeated repair and increased maintenance costs. This report describes the field demonstration and testing of a newly-constructed, glued-laminated timber girder bridge. Previous field work revealed that differential panel deflections in the glued-laminated deck were one significant factor resulting in the premature failure of the asphalt wearing surfaces on these bridges. In addition, laboratory work subsequent to the field testing attempted to address the problematic asphalt cracking common in transverse glued-laminated panel decks by testing several deck joint connection alternatives. The field demonstration project described in this report showcases the retrofit detail that was determined to provide the best field performance. The project was a cooperative effort between the Bridge Engineering Center (BEC) at Iowa State University and the United States Department of Agriculture (USDA) Forest Service Forest Products Laboratory (FPL).

Review of the Iowa Department of Human Services Drug Testing Process for Drug Testing of a Person Responsible for the Care of a Child in Child Abuse Cases, December 1, 2008

This report outlines the current drug testing practices, guidelines, programs and initiatives as currently implemented by the Department regarding the process for drug testing of a person responsible for the care of a child in child abuse cases.

Testing the bivariate distribution of daily equity returns using copulas: an application to the Spanish stock market

In this paper we deal with the identification of dependencies between time series of equity returns. Marginal distribution functions are assumed to be known, and a bivariate chi-square test of fit is applied in a fully parametric copula approach. Several families of copulas are fitted and compared with Spanish stock market data. The results show that the t-copula generally outperforms other dependence structures, and highlight the difficulty in adjusting a significant number of bivariate data series

Term structure of interest rates. European financial integration

In this paper we estimate, analyze and compare the term structures of interest rates in six different countries over the period 1992-2004. We apply the Nelson-Siegel model to obtain the term structures of interest rates at weekly intervals. A total of 4,038 curves are estimated and analyzed. Four European Monetary Union countries¿Spain, France, Germany and Italy¿are included. The UK is also included as a European non-member of the Monetary Union. Finally the US completes the analysis. The goal is to determine the differences in the shapes of the term structure of interest rates among these countries. Likewise, we can determine the most usual term structure shapes that appear for each country.*****

The development and pilot-testing of a training curriculum in adolescent medicine and health.

PURPOSE: To select and propose a set of knowledge, attitudes, and skills essential for the care of adolescents; to encourage the development of adolescent health multidisciplinary networks; and to set up training programs in as many European countries as possible. METHODS: The curriculum was developed by 16 physicians from 11 European countries with various professional specializations. In line with modern guidelines in medical education, it is a modular, flexible instrument which covers the main teaching areas in the field, such as basic skills (i.e. setting, rights and confidentiality, gender and cultural issues) as well as specific themes (i.e. sexual and reproductive health, eating disorders, chronic conditions). It consists of 17 thematic modules, each containing detailed objectives, learning approaches, examples, and evaluation methods. RESULT: Two international one-week summer schools were used to assess the feasibility and appropriateness of the curriculum. The overall evaluation was good, with most of the items surpassing three on a four-point Likert scale. However, it pointed to several aspects (process and content) which will need to be refined in the future, such as an increase in interactive sessions (role playing), and a better mix of clinical and public health issues.

Combination of carbon isotope ratio with hydrogen isotope ratio determinations in sports drug testing.

Carbon isotope ratio (CIR) analysis has been routinely and successfully applied to doping control analysis for many years to uncover the misuse of endogenous steroids such as testosterone. Over the years, several challenges and limitations of this approach became apparent, e.g., the influence of inadequate chromatographic separation on CIR values or the emergence of steroid preparations comprising identical CIRs as endogenous steroids. While the latter has been addressed recently by the implementation of hydrogen isotope ratios (HIR), an improved sample preparation for CIR avoiding co-eluting compounds is presented herein together with newly established reference values of those endogenous steroids being relevant for doping controls. From the fraction of glucuronidated steroids 5β-pregnane-3α,20α-diol, 5α-androst-16-en-3α-ol, 3α-Hydroxy-5β-androstane-11,17-dione, 3α-hydroxy-5α-androstan-17-one (ANDRO), 3α-hydroxy-5β-androstan-17-one (ETIO), 3β-hydroxy-androst-5-en-17-one (DHEA), 5α- and 5β-androstane-3α,17β-diol (5aDIOL and 5bDIOL), 17β-hydroxy-androst-4-en-3-one and 17α-hydroxy-androst-4-en-3-one were included. In addition, sulfate conjugates of ANDRO, ETIO, DHEA, 3β-hydroxy-5α-androstan-17-one plus 17α- and androst-5-ene-3β,17β-diol were considered and analyzed after acidic solvolysis. The results obtained for the reference population encompassing n = 67 males and females confirmed earlier findings regarding factors influencing endogenous CIR. Variations in sample preparation influenced CIR measurements especially for 5aDIOL and 5bDIOL, the most valuable steroidal analytes for the detection of testosterone misuse. Earlier investigations on the HIR of the same reference population enabled the evaluation of combined measurements of CIR and HIR and its usefulness regarding both steroid metabolism studies and doping control analysis. The combination of both stable isotopes would allow for lower reference limits providing the same statistical power and certainty to distinguish between the endo- or exogenous origin of a urinary steroid.

Angelo Panebiancos institutionaliseringshypotes: testing i en nordisk kontext

Abstract: Angelo Panebianco's institutionalizationhypothesis : testing in nordic context

Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

European integration, FDI and the internal geography of trade : evidence from Western European border regions

In this paper we use a gravity model to study the trade performance of French and Spanishborder regions relatively to non-border regions, over the past two decades. We find that,controlling for their size, proximity and location characteristics, border regions trade onaverage between 62% and 193% more with their neighbouring country than other regions,and twice as much if they are endowed with good cross border transport infrastructures.Despite European integration, however, this trade outperformance has fallen for the mostperipheral regions within the EU. We show that this trend was linked in part to a shift in the propensity of foreign investors to move their affiliates from the regions near their home market to the regions bordering the EU core.

Monetary integration and the cost of borrowing

With the beginning of the European Monetary Union (EMU), euro-area sovereign securities¿ adjusted spreads over Germany (corrected from the foreign exchange risk) experienced an increase that caused a lower than expected decline in borrowing costs. The objective of this paper is to study what explains that rising. In particular, if it took place a change in the price assigned by markets to domestic (credit risk and/or market liquidity) or to international risk factors. The empirical evidence supports the idea that a change in the market value of liquidity occurred with the EMU. International and default risk play a smaller role

Regional integration and specialisation patterns in Spain

The aim of this paper is to analyse how economic integration in Europe has affected industrial geographical concentration in Spain and explain what the driving forces behind industry location are. Firstly, we construct regional specialisation and geographical concentration indices for Spanish 50 provinces and 30 industrial sectors in 1979, 1986 and 1992. Secondly, we carry out an econometric analysis of the determinants of geographical concentration of industries. Our main conclusion is that there is no evidence of increasing specialisation in Spain between 1979 and 1992 and that the most important determinant of Spain¿s economic geography is scale economies. Furthermore, traditional trade theory has no effects in explaining the pattern of industrial concentration