Efeito da infiltração de sílica pelo método sol-gel na resistência à flexão de bicamadas de porcelana e Y-TZP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

De um subproduto industrial para um produto destinado à alimentação animal: produção de biomassa bacteriana

A grande diversidade das atividades industriais ocasiona durante o processo produtivo a geração de resíduos sólidos, líquidos e gasosos, que podem poluir e/ou contaminar o solo, a água e o ar. Embora existam regulamentos para o descarte desses resíduos, a inobservância às regras, a ineficiência dos tratamentos despoluentes e a inoperância de órgãos fiscalizadores permitem que, ainda hoje, sejam lançados ao ambiente grandes cargas de poluentes. Isso se aplica às indústrias de alimentos de origem animal. Felizmente, a visão dos empresários do setor vem mudando, na medida em que a imagem de uma empresa que conta com produtos e processos ambientalmente responsáveis representa parte das estratégias competitivas atuais. O objetivo deste trabalho foi demonstrar como um efluente industrial pode ser transformado em matéria prima para a obtenção de um produto com valor comercial, utilizando tecnologias reconhecidas pela indústria e a atividade microbiana. O efluente foi obtido em indústria de abate e processamento de tilápias, apresentado (valores médios) pH = 9,4, DQO = 1.127 mg/L, óleos e graxas = 1.166 mg/L, nitrogênio total = 813 mg/L, coliformes a 30–35o C = 1,0x105 NMP/mL, coliformes a 45o C = 0,41 NMP/mL, bolores e leveduras = 4,6x103 UFC/mL e, ocasionalmente, contendo Salmonella sp e Aeromonas sp. Os tratamentos físicos aplicados ao efluente incluíram gradeamento, filtração (50µm) e pasteurização (65o C/30 min). O cultivo de Rubrivivax gelatinosus foi realizado sob anaerobiose em reatores de vidro durante 7 dias, em temperatura ambiente (30±5o C) e 2.000±500 lux. A recuperação da biomassa foi feita por filtração tangencial (0,2 µm; 1,5 bar), centrifugação (3.400 g/30 min; 5o C) e liofilização (-40o C) e a pulverização foi realizada manualmente. A produção de massa celular atingiu 0,18 g/L, com produtividade de 0,0634 g/L.dia. O processo promoveu redução de 52% na DQO, 48% em óleos e graxas e 22% no nitrogênio total, gerando um resíduo com pH 7,9, livre de bactérias patogênicas e, portanto, apto ao descarte. O produto obtido apresentou cor vermelho escuro (L = 22,42; C = 14,22; h = 25,48), 4,55% de umidade, 57,39% de proteína, 11,08% de extrato etéreo, 4,05% de matéria mineral, 3,03 mg/g de oxicarotenóides, 20,27 NMP/g de coliformes a 30–35o C, <1,0 NMP/g de coliformes a 45o C, 1,2x103 UFC/g de bolores e leveduras e ausência de microrganismos patogênicos. Essas características apontam para um potencial pigmentante e nutricional positivo no produto, que pode encontrar aplicação na produção animal, com segurança microbiológica. Dessa forma, fecha-se um ciclo autosustentável que pode ser adotado na própria fonte geradora do resíduo industrial, permitindo a reversão de gastos com tratamento despoluente em receitas advindas da comercialização de um novo produto.

Cor e oxicarotenóides em biomassa bacteriana produzida por diferentes métodos de secagem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da biomassa bacteriana como aditivo alimentar sobre a cor da carne da coxa e desempenho de frangos de corte

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da biomassa bacteriana como aditivo alimentar sobre a cor do peito de frangos de corte e o rendimento industrial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Secagem de biomassa bacteriana: rendimento, recuperação e produtividade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Recuperação de biomassa bacteriana produzida no tratamento de efluente industrial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O efeito do consumo abusivo de álcool no torque de remoção de implante de titânio

Studies have reported that alcohol may lead to imbalance in bone formation and resorption, however, its effects on osseointegration of titanium implants continues to be an inconclusive subject. In this context, the aim of this study was to make a biomechanical evaluation of the effect of abusive alcohol consumption on the removal torque of osseointegrated titanium implants. Male Wistar rats (n=30) were divided into two experimental groups (15 each) receiving only water (Control) or 36% alcohol solution oral administration. Thirty days later, all animals were submitted to titanium implant (2.2 mm x 4 mm) placement in the right and left tibiae. The surgical alveoli were prepared with a 2 mm drill mounted in a counter-angle hand-piece (20:1 ratio, 35 Ncm torque at 1200 rpm) under abundant cooling. Five animals from each group were euthanized at 15, 30, and 60 days. Tibiae were submitted to reverse torque analysis. Data obtained were submitted to statistical analysis by the non-parametric Kruskal-Wallis and Dunn Tests (p < 0.05). Animals in the alcohol group presented lower removal torque values when compared with control group animals for all periods tested (p < 0.05). It can be concluded that abusive alcohol consumption can reduce the removal torque of titanium implants placed in rat tibiae, suggesting that alcohol may interfere in the osseointegration process of titanium implants.

Análise das proporções faciais e sua relação com o formato dentário e com a dimensão vertical de repouso e de oclusão entre discentes institucionalizados

Considering the importance of the esthetic and the adequate register of vertical dimension (VD) to the oral rehabilitation, this study had as aims the analysis and comparison of two methods to get VD (Pleasure and Willis), functional space (FE), acquisition and correlation of facial and dental measurements. To do this, rest (RVD) and occlusal vertical dimension (OVD) and FE were achieved from the 30 students of the Federal University of Goias College of Dentistry. Following that, dental measurements of height and of the superior central incisors (SCI) and canine distance were registered. A facial analysis was performed to get the intercomissura, interalar, interpupilar, intercantal distance, besides register parameters as coincidence of dental and facial line, type of smile, face and SCI forms, and mastication type. The collected data were tabulated, compared by medias and standard deviations, and submitted to non-parametrical statistical analysis of Kruskal-Wallis and .Mann-Whitney with 5% of probability. The results doesn’t indicated statistical significant difference between FE of the two techniques. The measures of facial analysis are comparable with literature published data’s, but can’t be used as a parameter to the selection of intercanine distance. In 56.7% of the cases, there were coincidences of face and SCI forms, which could be a viable parameter in the selection of acrylic resin artificial tooth.

Reação do tecido conjuntivo subcutâneo de ratos ao implante de Artglass®: estudo histológico

Indirect composite resin systems have been routinely recommended for making restorations in distressed patients. The purpose of this study was to evaluate histologically in rats the effect of chronic stress on the reaction of subcutaneous connective tissue after implant of Artglass™. For this purpose, 60 rats were divided into four groups (GI (control), GII (stressed), GIII (Artglass™) and GIV (Artglass™. / stressed) received dorsal subcutaneous implants of polyethylene tubes containing saline solution (GI and GII) or Artglass™ (GIII and GIV). In groups of four animals were sacrificed at 7,14 and 28 days postoperatively. The results allowed to observe more intense inflammatory reaction and tissue organization later in the animals subjected to stress.

Clareamento dentário x autoestima x autoimagem

Dental changes that compromise facial harmony can have serious consequences on the social image of the patient. Depending on the emotional significance for the individual it can change interpersonal relationships, causing profound changes in their patterns of self-acceptance and self-image, with profound effects on their self-esteem of the patient. The search for tooth whitening as cosmetic factor for a harmonic smile grew sharply in the last decade. Although the color of the tooth represents only one aspect in the set of determinants of facial harmony, it is a strong factor because it is quickly perceived. This study aims to report the clinical case of a patient with spots on their upper central incisors. For the patient these spots have compromised her smile, causing harm and discomfort in their everyday social and professional relationships.

Influence of morphological variables in photoelastic models with implants submitted to axial loading

Purpose: This study used 12 photoelastics models with different height and thickness to evaluate if the axial loading of 100N on implants changes the morphology of the photoelastic reflection. Methods: For the photoelastic analysis, the models were placed in a reflection polariscope for observation of the isochromatic fringes patterns. The formation of these fringes resulted from an axial load of 100N applied to the midpoint of the healing abutment attached to the implant with 10.0mm x 3.75mm (Conexão, Sistemas de Próteses, Brazil). The tension in each photoelastic model was monitored, photographed and observed using the software Phothoshop 7.0. For qualitative analysis, the area under the implant apex was measured including the green band of the second order fringe of each model using the software Image Tool. After comparison of the areas, the performance generated by each specimen was defined regarding the axial loading. Results: There were alterations in area with different height and thickness of the photoelastic models. It was observed that the group III (30mm in height) presented the smallest area. Conclusion: There was variation in the size of the areas analyzed for different height and thickness of the models and the morphology of the replica may directly influence the result in researches with photoelastic models.