Computed tomography image of the mediastinal and axillary lymph nodes in clinically sound Rottweilers

Trough computed tomography (CT), it is possible to evaluate lymph nodes in detail and to detect changes in these structures earlier than with radiographs and ultrasound. Lack of information in the veterinary literature directed the focus of this report to normal aspects of the axillary and mediastinal lymph nodes of adult dogs on CT imaging. A CT scan of 15 normal adult male and female Rottweilers was done. To define them as clinically sound, anamnesis, physical examination, complete blood count, renal and hepatic biochemistry, ECG, and thoracic radiographs were performed. After the intravenous injection of hydrosoluble ionic iodine contrast medium contiguous 10mm in thickness thoracic transverse images were obtained with an axial scanner. In the obtained images mediastinal and axillary lymph nodes were sought and when found measured in their smallest diameter and their attenuation was compared to musculature. Mean and standard deviation of: age, weight, body length and the smallest diameter of the axillary and mediastinal lymph nodes were determined. Mean and standard deviation of parameters: age 3.87±2.03 years, weight 41.13±5.12, and body length 89.61±2.63cm. Axillary lymph nodes were seen in 60% of the animals, mean of the smallest diameter was 3.58mm with a standard deviation of 2.02 and a minimum value of 1mm and a maximum value of 7mm. From 13 observed lymph nodes 61.53% were hypopodense when compared with musculature, and 30.77% were isodense. Mediastinal lymph nodes were identified in 73.33% of the dogs; mean measure of the smallest diameter was 4.71mm with a standard deviation of 2.61mm and a minimum value of 1mm, and a maximum value of 8mm. From 14 observed lymph nodes 85.71% were isodense when compared with musculature and 14.28% were hypodense. The results show that it is possible to visualize axillary and mediastinal lymph nodes in adult clinically sound Rottweilers with CT using a slice thickness and interval of 10mm. The smallest diameter of the axillary and mediastinal lymph nodes not surpassed 7mm and 8mm respectively. Their attenuations were equal or smaller than that of musculature in the post contrast scan.

Entrepreneurial orientation in small and medium-sized enterprises during economic crisis

The economic importance of small and medium-sized enterprises (SMEs) and entrepreneurship has increased significantly in recent decades and entrepreneurial activity and SMEs are deemed vital to economic progress. Therefore, it is justifiable to study how small firms and entrepreneurs can enhance their performance and emergence in the turbulent economic environment. The concept of entrepreneurial orientation (EO) has recently attracted considerable attention in the field of entrepreneurship research. EO generally refers to a firm’s propensity to be innovative, to be proactive and to take risks. A majority of EO studies so far have found that adopting EO associated entrepreneurial behaviors will help firms to create or sustain a high level of performance. This dissertation explores the main drivers and performance implications of EO for SMEs in time of economic crisis. Hence the first objective of this dissertation is to examine the performance implications of EO and to test the role of EO on how firms are treated by the crisis at operative level. The second objective is to expand the prevailing understanding of determinants of EO by exploring the relationship between owner's work related values, attitudes, demographic characteristics, firm’s financial resources and EO. EO was found to be a significant and positive factor behind a firm’s long run growth. Hence it can be said that EO has positive implications for firm performance. But on the other hand, during a time of economic crisis the different dimensions of EO had both positive and negative effects on performance of SMEs. The performance implications varied across different stages of the crisis and were also dependent on what measure was used for measuring the performance. The main drivers of EO in SMEs were the personal work related values of the entrepreneur and his/her prior experience as an entrepreneur. The intrinsic work values related to interest, responsibility, challenge, self-development or intellectual stimulation and values related to status, power, achievement and recognition had a positive effect on the level of EO. On the other hand, extrinsic values related to high income, material possessions, benefits such as generous holidays, job security, and comfort through good working conditions decreased the level of EO

The Shadow Moiré method using the phase shifting technique and digital image processing: computational implementation and application to the 3D-reconstruction of a buckled plate

The Shadow Moiré fringe patterns are level lines of equal depth generated by interference between a master grid and its shadow projected on the surface. In simplistic approach, the minimum error is about the order of the master grid pitch, that is, always larger than 0,1 mm, resulting in an experimental technique of low precision. The use of a phase shift increases the accuracy of the Shadow Moiré technique. The current work uses the phase shifting method to determine the surfaces three-dimensional shape using isothamic fringe patterns and digital image processing. The current study presents the method and applies it to images obtained by simulation for error evaluation, as well as to a buckled plate, obtaining excellent results. The method hands itself particularly useful to decrease the errors in the interpretation of the Moiré fringes that can adversely affect the calculations of displacements in pieces containing many concave and convex regions in relatively small areas.

Real-time Image-based RGB-D Camera Motion Tracking and Environment Mapping

In this work, image based estimation methods, also known as direct methods, are studied which avoid feature extraction and matching completely. Cost functions use raw pixels as measurements and the goal is to produce precise 3D pose and structure estimates. The cost functions presented minimize the sensor error, because measurements are not transformed or modified. In photometric camera pose estimation, 3D rotation and translation parameters are estimated by minimizing a sequence of image based cost functions, which are non-linear due to perspective projection and lens distortion. In image based structure refinement, on the other hand, 3D structure is refined using a number of additional views and an image based cost metric. Image based estimation methods are particularly useful in conditions where the Lambertian assumption holds, and the 3D points have constant color despite viewing angle. The goal is to improve image based estimation methods, and to produce computationally efficient methods which can be accomodated into real-time applications. The developed image-based 3D pose and structure estimation methods are finally demonstrated in practise in indoor 3D reconstruction use, and in a live augmented reality application.

Probabilistic position and orientation estimation of rigid objects using an RGB-D sensor

The recent emergence of low-cost RGB-D sensors has brought new opportunities for robotics by providing affordable devices that can provide synchronized images with both color and depth information. In this thesis, recent work on pose estimation utilizing RGBD sensors is reviewed. Also, a pose recognition system for rigid objects using RGB-D data is implemented. The implementation uses half-edge primitives extracted from the RGB-D images for pose estimation. The system is based on the probabilistic object representation framework by Detry et al., which utilizes Nonparametric Belief Propagation for pose inference. Experiments are performed on household objects to evaluate the performance and robustness of the system.

Brand attitudes influence on city brand image, and their impact on behavioral intention

The main objective of this Master’s Thesis was to examine the perceived city brand image of tourists and residents. It was aimed to accomplish by examining first the contribution of city attributes and marketing communications on forming brand attitudes, and then discover how the brand attitudes influence on city brand image. The impact of brand attitudes and city brand image on behavioral intention was also reviewed. The empirical part of the thesis was conducted with a quantitative method through online-based survey. The sample (n = 492) consisted of tourists and residents of the case city. The data was analyzed with statistical analyses by SPSS program. Brand attitudes, based on the main attributes, were calculated through multi-attribute attitude model. The results confirmed exposure to marketing communications has direct and positive influence on brand attitudes, especially the offline marketing communications. The findings revealed brand attitudes impact directly on city brand image perception. Brand attitudes and brand image dimensions had direct impact on tourists and residents’ behavioral intention. The findings provide important information for the city marketers. They increase marketers understanding on how target population perceives the city brand image and how it impacts on their future behavior. This thesis reveals the perception of current city brand image and gives guidance on what to emphasize in city branding to increase city’s attractiveness in conjunction with its economic development. Furthermore, the created framework can be utilized also in the future researches.

University Image vs. University Identity: Congruence between Expectations and Experience

The aim of this thesis was to examine congruencies between university identity and university images of prospective and current students. Therefore, factors essentially influencing on expected and experienced university images were identified. Providing an understanding on the differences in the formation of both concepts allowed the analysis of potential incongruities between a university’s identity and the perceptions its students hold. The study was conducted in July and August 2013 at Lappeenranta University of Technology by means of a web-based research survey. The sample consisted of 160 international Master’s degree students who were admitted in 2011, 2012 and 2013. Descriptive and multivariate statistical analysis methods were used to process the data. The results of the study indicated statistically significant incongruities between the case university’s identity and its students’ images. Further, the expected and experienced university images showed incongruities to each other. Deviations were additionally detected to be dependent on the students’ home regions. All in all, there is potential for an improvement of the students’ experiences resulting from a low perception of the student’s preparation for future job life.

Brand Identity and Image in B2B Factory Automation Context

The goal of this thesis is to study how a solution-oriented business-to-business company can utilize its brand as a strategic asset by using the concepts of brand identity and brand image. The study analyses the intended brand message (identity) contrasting it with the customer perceptions (image) to reveal points of parity and congruence. The study uses a case company as an example and discusses the benefits of brand management as well. Internally, brands can be studied by performing a set of interviews amongst top and middle management. The interviews need to consider the various elements of branding from associations to differentiation and value creation. Customers’ perceptions can be reliably studied via online survey designed to compare the intended brand message with customers’ experiences. From the perspective of industrial management the incentive for brand development lies in both monetary and managerial benefits. In literature the four essential benefits of B2B branding are risk dilution, efficiency of communications, strategic direction and price premiums. As a result, suggestive models for brand identity and image were devised and compared. The Case Company perceives itself as a technically oriented open-integrator, with a strong focus on reliability and customer service. Customers agree with the picture in general, but there are some points of parity as well: they are quite satisfied with the company and perceive it as reliable and providing the promised value. The problematic areas revolve around customer interaction and maintaining the leadership position. The results confirm previous findings in B2B branding theory, where the reliability and credibility of the supplier are in major role. The results also suggest a holistic, corporate approach on branding.

Local Features in Image and Video Processing - Object Class Matching and Video Shot Detection

The usage of digital content, such as video clips and images, has increased dramatically during the last decade. Local image features have been applied increasingly in various image and video retrieval applications. This thesis evaluates local features and applies them to image and video processing tasks. The results of the study show that 1) the performance of different local feature detector and descriptor methods vary significantly in object class matching, 2) local features can be applied in image alignment with superior results against the state-of-the-art, 3) the local feature based shot boundary detection method produces promising results, and 4) the local feature based hierarchical video summarization method shows promising new new research direction. In conclusion, this thesis presents the local features as a powerful tool in many applications and the imminent future work should concentrate on improving the quality of the local features.

Antecedents and Performance Outcomes of Entrepreneurial Orientation: a Comparative Cross-Country Study

Development of entrepreneurial orientation (EO) within a company is considered to be significant for firm performance in a contemporary market society with constantly changing environment. Considered as entrepreneurial, the firm is able to innovate, make risky investments and be proactive. The purpose of the thesis is to investigate factors which influence EO, the impact of EO on firm performance, and a mediating role of EO in developed and emerging market contexts. The empirical research is conducted quantitatively in a form of a survey in Russia and Finland. The results of the thesis have shown that the relationship between antecedents, EO and firm performance outcomes is different in developed and emerging contexts and can be explained by cultural differences and institutional development. The empirical research has both theoretical and practical novelty. It contributes to the existing literature on EO by the usage of comparative cross-country approach and a broader three-way interaction model between the variables. A general practical implication of the research is that managers may benefit from developing entrepreneurial strategic posture in particular contexts.

European luxury brands made in China: the effect of low-cost country manufacturing on brand image and purchase decisions

European luxury brands have an image of manufacturing their products in the same country where the brands originate. However, in the past years many luxury brands have shifted their manufacturing to countries outside Europe. China is now a common manufacturing country for European luxury brands despite the country’s poor image as a manufacturer. Chinese manufacturing is often associated with bad quality, bad labour conditions, mass production, and counterfeits. The image of China does not quite match the image luxury brands enjoy including characteristics such as high end quality, craftsmanship, details, design, or premium price. A negatively perceived country-of-manufacture may have an effect on a brand’s image and consumers’ purchase decisions. This thesis is focused on European luxury brands manufacturing in China, and how this effects the brand image and purchase decisions among luxury consumers. The empirical part of this thesis is based on focus group research, which is a popular method in the field of qualitative research. The main focus group is female luxury consumers in Finland. This main group has been divided into three categories: 1) the university students, 2) the young career women, 3) the experienced luxury consumers. This categorization has been done based on their different stages in luxury consumption. All in all, the empirical research consisted of 11 interviews and 29 participants. The main contribution of this thesis was that there is a difference between the opinions of the younger groups (university students and young career women) and the experienced luxury consumers when discussing the effect of country-of-manufacture on brand image and purchase decisions of luxury brands. The younger participants thought that manufacturing luxury products in China might affect the brand image, but their purchase decisions would not be that much affected by the country-of-origin. The experienced luxury consumers had quite a different view on the country-of-origin of luxury brands – they found it an important decisive factor prior making purchases. The majority of experienced luxury consumers would not buy luxury products made in China, and they would always check where these products are made in.

Model-Based Tracking Initialization in Ship Building Environment

An augmented reality (AR) device must know observer’s location and orientation, i.e. observer’s pose, to be able to correctly register the virtual content to observer’s view. One possible way to determine and continuously follow-up the pose is model-based visual tracking. It supposes that a 3D model of the surroundings is known and that there is a video camera that is fixed to the device. The pose is tracked by comparing the video camera image to the model. Each new pose estimate is usually based on the previous estimate. However, the first estimate must be found out without a prior estimate, i.e. the tracking must be initialized, which in practice means that some model features must be identified from the image and matched to model features. This is known in literature as model-to-image registration problem or simultaneous pose and correspondence problem. This report reviews visual tracking initialization methods that are suitable for visual tracking in ship building environment when the ship CAD model is available. The environment is complex, which makes the initialization non-trivial. The report has been done as part of MARIN project.

Opening words and orientation to the theme

Esitys KDK-käytettävyystyöryhmän järjestämässä seminaarissa: Miten käyttäjien toiveet haastavat metatietokäytäntöjämme? / How users' expectations challenge our metadata practices? 30.9.2014.