Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.

Geological observation in southeastern Zanskar and adjacent Lahul area (northern Himalaya).

The paper deals with the stratigraphic and structural setting of the sedimentary sequence cropping out in southeastern Zanskar and adjacent Lahul areas. The Tibetan Zone succession of southeastern Zanskar consists of about 6000 m of sediments, Late Precambrian~ ?Eocene in age, arranged in two superposed slabs (Pugh tal Unit, below, and Zangla Unit, above) tectonically resting upon the High Himalayan Crystalline. The Pughtal sequence, mostly terrigenous with carbonate units in the Cambrian, Silurian and Carboniferous, is about 2500 m thick. It was deposited from ?Late Precambrian to Carboniferous or ?Early Permian. The Permian Panjal Traps constitute the "sole" of the Zangla Unit, whose sedimentary sequence, about 3000 m thick, mainly carbonatic, spans from Late Permian (Kuling Formation) to Middle Jurassic (Kioto Limestone) in eastern Zanskar. In the Zangla area Late Jurassic/Cretaceous formations (Spiti Shales, Giumal Sandstone, Chikkim Limestone) are also present. Towards northwest, the sequence ranges up to Paleocene (Spanboth Formation) and ?Eocene (Chulung La Slates). Au nord de la Haute Chaine, dans la partie septentrionale de I'Himalaya, la marge continentale indienne a vu plus de 6000 m de sediments se deposer depuis I'Infracambrien jusqu'a I'Eocene. Lors de l'orogenese himalayenne, ces sediments ont ete decolles de leur substratum originel, dMormes et metamorphises de maniere differenciee suivant leur position. Ils reposent en contact tectonique sur la nappe cristalline du Haut-Himalaya. L'unite inferieure ou unite de Pughtal consiste, la ou elle est complete, en plus de 2500 m de sediments en partie detritiques terrigenes mais marque par l'edification de plates-formes carbonatees au Cambrien, Silurien et Carbonifere. Dans cette unite on releve deux grandes sequences sedimentaires separees par l'evenement epirogenique et magmatique tardi-Cambrien (500 rna), contrecoup de l'orogenese pan-africaine. Un niveau massif de vo1canites basaltiques permiennes ~ les Panjal Traps ~ forme la base ou sole de I'unite superieure (nappe de Zangla). Cette unite, plissee de maniere disharmonique, recouvre progressivement vers l'ouest des niveaux de plus en plus anciens de l'unite inferieure, niveaux eux-memes replisses en grands plis couches kilometriques a vergence nord. Dans la partie occidentale (Ringdom) l'unite superieure repose directement sur la nappe cristalline. Cette unite montre une serie sedimentaire avec des carbonates de plate-forme bien developpes au Trias superieur et au Lias puis des sediments surtout pelagiques et en partie detritiques terrigenes au Jurassique superieur et au Cretace. Des la fin du Cretace et jusqu'au Paleocene superieur s'edifie a nouveau une plate-forme peu profonde. La serie se termine par des couches continentales attribuees a l'Eocene. L'evolution geodynamique durant Ie Paleozoique et Ie Mesozoique est analysee. II en ressort que la sedimentation, a partir de I'Ordovicien, est regJee plus par des grands cycles eustatiques que par des mouvements tectoniques ou epirogeniques regionaux (les orogeneses caledoniennes, hercyniennes et cretacees des auteurs).

Multilocus phylogeography of the common lizard Zootoca vivipara at the Ibero-Pyrenean suture zone reveals lowland barriers and high-elevation introgression.

BACKGROUND: The geographic distribution of evolutionary lineages and the patterns of gene flow upon secondary contact provide insight into the process of divergence and speciation. We explore the evolutionary history of the common lizard Zootoca vivipara (= Lacerta vivipara) in the Iberian Peninsula and test the role of the Pyrenees and the Cantabrian Mountains in restricting gene flow and driving lineage isolation and divergence. We also assess patterns of introgression among lineages upon secondary contact, and test for the role of high-elevation trans-mountain colonisations in explaining spatial patterns of genetic diversity. We use mtDNA sequence data and genome-wide AFLP loci to reconstruct phylogenetic relationships among lineages, and measure genetic structure RESULTS: The main genetic split in mtDNA corresponds generally to the French and Spanish sides of the Pyrenees as previously reported, in contrast to genome-wide AFLP data, which show a major division between NW Spain and the rest. Both types of markers support the existence of four distinct and geographically congruent genetic groups, which are consistent with major topographic barriers. Both datasets reveal the presence of three independent contact zones between lineages in the Pyrenean region, one in the Basque lowlands, one in the low-elevation mountains of the western Pyrenees, and one in the French side of the central Pyrenees. The latter shows genetic evidence of a recent, high-altitude trans-Pyrenean incursion from Spain into France. CONCLUSIONS: The distribution and age of major lineages is consistent with a Pleistocene origin and a role for both the Pyrenees and the Cantabrian Mountains in driving isolation and differentiation of Z. vivipara lineages at large geographic scales. However, mountain ranges are not always effective barriers to dispersal, and have not prevented a recent high-elevation trans-Pyrenean incursion that has led to asymmetrical introgression among divergent lineages. Cytonuclear discordance in patterns of genetic structure and introgression at contact zones suggests selection may be involved at various scales. Suture zones are important areas for the study of lineage formation and speciation, and our results show that biogeographic barriers can yield markedly different phylogeographic patterns in different vertebrate and invertebrate taxa.

Trace element chemistry and U-Pb dating of zircons from oceanic gabbros and their relationship with whole rock composition (Lanzo, Italian Alps)

The U-Pb ages and the trace element content of zircon U-Pb along with major and trace element whole rock data on gabbroic dikes from the Lanzo lherzolitic massif, N-Italy, have been determined to constrain crustal accretion in ocean-continent transition zones. Three Fe-Ti gabbros were dated from the central and the southern part of the massif providing middle Jurassic ages of 161 +/- 2, 158 +/- 2 and 163 +/- 1 Ma, which argue for magmatic activity over few millions of years. Zircon crystals are characterized by high but variable Th/U ratios, rare earth element patterns enriched in heavy rare earths, pronounced positive Ce and negative Eu-anomalies consistent with crystallization after substantial plagioclase fractionation. The zircon trace element composition coupled with whole rock chemistry was used to reconstruct the crystallization history of the gabbros. A number of gabbros crystallized in situ, and zircon precipitated from trapped, intercumulus liquid, while other gabbros represent residual liquids that were extracted from a cumulus pile and crystallized along syn-magmatic shear zones. We propose a model in which the emplacement mechanism of gabbroic rocks in ocean-continent transition zones evolves from in situ crystallization to stratified crystallization with efficient extraction of residual liquid along syn-magmatic shear zones. Such an evolution of the crystallization history is probably related to the thermal evolution of the underlying mantle lithosphere.

Origin of cadmium enrichments in carbonate rocks deposited in the Alpine Tethys area during the Middle-Late Jurassic

ABSTRACTThe pollution of air, soil and water by heavy metals through anthropogenic activities is an object of numerous environmental studies since long times. A number of natural processes, such as volcanic activity, hydrothermal fluid circulation and weathering of metal-rich deposits may lead to an additional and potentially important input and accumulation of heavy metals in the environment. In the Swiss and French Jura Mountains, anomalous high cadmium (Cd) concentrations (up to 16 ppm) in certain soils are related to the presence of underlying Cd-enriched (up to 21 ppm) carbonate rocks of Middle to Late Jurassic age. The aim of this study is to understand the processes controlling Cd incorporation into carbonate rocks of Middle and Late Jurassic age and to reconstruct the sedimentary and environmental conditions, which have led to Cd enrichments in these sedimentary rocks.Cd concentrations in studied hemipelagic sections in France vary between 0.1 and 0.5 ppm (mean 0.15 ppm). Trace-element behavior and high Mn concentrations suggest that sediment accumulation occurred in a well-oxygenated environment. Increases in Cd contents in the bulk-rock carbonate sediments may be related to increases in surface-water productivity under oxic conditions and important remineralization of organic matter within the water column. In platform settings preserved in the Swiss Jura Mountains, no correlation is observed between Cd contents and evolution of environmental conditions. Cd concentrations in these platform sections are often below the detection limit, with isolated peaks of up to 21 ppm. These important Cd enrichments are associated with peaks in Zn concentrations and are present in carbonate rocks independently of facies and age. The high Cd contents in these shallow-water carbonate rocks are partly related to the presence of disseminated, Cd-rich (up to 1.8%), sphalerite (ZnS) mineralization. The basement rocks are considered to be the source of metals for sulfide mineralization in the overlying Jurassic strata, as the sphalerite Pb isotope pattern is comparable to that of granite rocks from the nearby southern Black Forest crystalline massif. The Rb-Sr ages of sphalerite samples indicate that a main phase of sphalerite formation occurred near the boundary between the late Middle and early Late Jurassic, at around 162 Ma, as a result of enhanced tectonic and hydrothermal activity in Europe, related to the opening of the Central Atlantic and to the tectonic/thermal subsidence during spreading of the Alpine Tethys. I therefore propose to use unusually high Cd concentrations in carbonates as a tracer of tectonic activity in the Jura Mountains area, especially in the case when important enrichments in Zn co-occur. Paleoproductivity reconstructions based on records of authigenic Cd may be compromised not only by post-depositional redistribution, but also by incorporation of additional Cd from hydrothermal solutions circulating in the rock.The circulation of metal-rich hydrothermal fluids through the sediment sequence, in addition to specific environmental conditions during sedimentation, contributes to the incorporation of Cd into the carbonate rocks. However, only hydrothermal activity has led to the unusually high concentrations of Cd in carbonate rocks of Bajocian-Oxfordian age, through the formation of sphalerite mineralization.

Forma Conventus Tarraconenesis I: Baetulo-Blanda. La primera carta arqueològica de la Península Ibèrica

Josep de Calasanç Serra i Ràfols va dedicar una part molt important de la seva vida professional a la topografia arqueològica, als arxius del Servei d’Investigacions Arqueològiques de l’Institut d’Estudis Catalans i a fer el seguiment de la descoberta i l’evolució dels jaciments arqueològics del país. En consonància amb aquesta labor, el 1928 va publicar la primera carta arqueològica de la península Ibèrica, una de les primeres corresponents al programa Forma Orbis Romani, de la Unió Acadèmica Internacional. Després de la Guerra Civil, proposem que fou el principal redactor de la Carta Arqueológica de España. Barcelona, que representa la tercera carta arqueològica publicada a la península Ibèrica.

Factors that determine the evolution of high-growth businesses

The study herein discusses research aimed at elucidating the factors that contribute to a business' ability to maintain high growth. The database from the Iberian Balance Sheet Analysis System (SABI, from its initials in Spanish) was used to identify 250 industrial Catalonian businesses with high growth during 2004-2007. These companies participated in a survey on strategies and management practices; in 2013, they were re-analyzed to investigate the factors that contributed to continued growth for certain companies. Through diverse statistical techniques, business policies related to quality, innovation, internationalization and finance were shown to influence business growth and sustainability over time. High-growth businesses have been studied throughout the world, but this is the first study to investigate the evolution of businesses after a high-growth phase.

Sobre un modelo constructivo de la arquitectura ibérica en territorio Ausetano

En este trabajo presentamos el estudio arquitectónico de un tipo de construcción identifi cado en el territorio ibérico ausetano. A partir del análisis constructivo de tres obras defensivas militares identifi cadas como murallas de compartimentos (Turó del Montgròs, Casol de Puigcastellet y l’Esquerda), planteamos una propuesta de restitución del diseño arquitectónico de estas construcciones basadas en el uso de formas geométricas simples y en la adición de módulos cuadrangulares.

La integración de Tarrakuna y su territorio en al-Andalus (s. VIII)

A inicios del siglo VIII, el antiguo regnum gothorum se vio fragmentado en diferentes territorios políticos, como muestra la simultaneidad de dos reyes (Rodrigo y Akhila) entre 710-711. Con la conquista islámica de la Península Ibérica y la formación de al-Andalus, las diversas regiones conocieron distintos destinos: algunas aristocracias pactaron con los conquistadores, otras se vieron sometidas por la fuerza. Pero la tradición historiográfica ha visto en la ciudad de Tarragona una excepción, un caso aislado. El objetivo de este artículo es plantear una nueva hipótesis, según la cual, durante todo el siglo VIII, madinat Tarrakuna formó parte del Estado andalusí de la misma forma que otras antiguas sedes episcopales visigodas.

Modélisation par automate cellulaire des phénomènes diagénétiques des plateformes carbonatées : calibration et paramétrage à partir de deux cas d'études : l'Urgonien du Vercors (Crétacé inférieur, SE France) et les Calcaires Gris du Mont Compomolon (Lias, NE Italie)

Une fois déposé, un sédiment est affecté au cours de son enfouissement par un ensemble de processus, regroupé sous le terme diagenèse, le transformant parfois légèrement ou bien suffisamment pour le rendre méconnaissable. Ces modifications ont des conséquences sur les propriétés pétrophysiques qui peuvent être positives ou négatives, c'est-à-dire les améliorer ou bien les détériorer. Une voie alternative de représentation numérique des processus, affranchie de l'utilisation des réactions physico-chimiques, a été adoptée et développée en mimant le déplacement du ou des fluides diagénétiques. Cette méthode s'appuie sur le principe d'un automate cellulaire et permet de simplifier les phénomènes sans sacrifier le résultat et permet de représenter les phénomènes diagénétiques à une échelle fine. Les paramètres sont essentiellement numériques ou mathématiques et nécessitent d'être mieux compris et renseignés à partir de données réelles issues d'études d'affleurements et du travail analytique effectué. La représentation des phénomènes de dolomitisation de faible profondeur suivie d'une phase de dédolomitisation a été dans un premier temps effectuée. Le secteur concerne une portion de la série carbonatée de l'Urgonien (Barrémien-Aptien), localisée dans le massif du Vercors en France. Ce travail a été réalisé à l'échelle de la section afin de reproduire les géométries complexes associées aux phénomènes diagénétiques et de respecter les proportions mesurées en dolomite. De plus, la dolomitisation a été simulée selon trois modèles d'écoulement. En effet, la dédolomitisation étant omniprésente, plusieurs hypothèses sur le mécanisme de dolomitisation ont été énoncées et testées. Plusieurs phases de dolomitisation per ascensum ont été également simulées sur des séries du Lias appartenant aux formations du groupe des Calcaire Gris, localisées au nord-est de l'Italie. Ces fluides diagénétiques empruntent le réseau de fracturation comme vecteur et affectent préférentiellement les lithologies les plus micritisées. Cette étude a permis de mettre en évidence la propagation des phénomènes à l'échelle de l'affleurement. - Once deposited, sediment is affected by diagenetic processes during their burial history. These diagenetic processes are able to affect the petrophysical properties of the sedimentary rocks and also improve as such their reservoir capacity. The modelling of diagenetic processes in carbonate reservoirs is still a challenge as far as neither stochastic nor physicochemical simulations can correctly reproduce the complexity of features and the reservoir heterogeneity generated by these processes. An alternative way to reach this objective deals with process-like methods, which simplify the algorithms while preserving all geological concepts in the modelling process. The aim of the methodology is to conceive a consistent and realistic 3D model of diagenetic overprints on initial facies resulting in petrophysical properties at a reservoir scale. The principle of the method used here is related to a lattice gas automata used to mimic diagenetic fluid flows and to reproduce the diagenetic effects through the evolution of mineralogical composition and petrophysical properties. This method developed in a research group is well adapted to handle dolomite reservoirs through the propagation of dolomitising fluids and has been applied on two case studies. The first study concerns a mid-Cretaceous rudist and granular platform of carbonate succession (Urgonian Fm., Les Gorges du Nan, Vercors, SE France), in which several main diagenetic stages have been identified. The modelling in 2D is focused on dolomitisation followed by a dédolomitisation stage. For the second study, data collected from outcrops on the Venetian platform (Lias, Mont Compomolon NE Italy), in which several diagenetic stages have been identified. The main one is related to per ascensum dolomitisation along fractures. In both examples, the evolution of the effects of the mimetic diagenetic fluid on mineralogical composition can be followed through space and numerical time and help to understand the heterogeneity in reservoir properties. Carbonates, dolomitisation, dédolomitisation, process-like modelling, lattice gas automata, random walk, memory effect.

Adaptació metrològica grega en l'arquitectura ibèrica de Catalunya: Puig de Sant Andreu d'Ullastret i Mas Castellar de Pontós

En el presente artículo se analiza la adopción en el contexto ibérico catalán de los patrones métricos característicos de las colonias griegas del Mediterráneo occidental. La determinación de la unidad de medida constructiva empleada, así como de su aplicación, ha sido posible mediante la identificación de los principios geométricos estructurales de las torres defensivas ibéricas.

Estratigrafia i evolució conceptual d'un paisatge de muntanya al massís del Garraf: la Maçana-Rovirós-Térmens (Begues)

En aquest estudi, l'aplicació regressiva de tècniques com la prospecció arqueològica, la foto i cartointerpretació, els SIG i el buidatge documental han permès la reconstrucció diacrònica del paisatge de l'àrea de la Maçana-Térmens-Rovirós (Begues). L'estudi paisatgístic del Garraf revesteix un singular interès per la seva condició muntanyenca i la seva intensa antropització. Els entorns de muntanya són medis especialment sensibles a processos de canvi, especialment en el cas del massís del Garraf, proper a importants nuclis d'habitació des de l'antiguitat. El nostre treball mostrarà com, en ocasions, el canvi paisatgístic ha estat irreversible al massís.

Noves aportacions al coneixement florístic de l'Empordà - III

New records of some vascular plants in the Empordà (NE of Iberian Peninsula) are given. Some of them are new for this area. We make several annotations about chorology of these taxa. Coronilla repanda (Poir.) Guss. subsp. dura (Cav.) Cout. and Ranunculus nodiflorus L. are indicated for the first time in Catalonia

Domestic architecture and social differences in North-Eastern Iberia during the iron age (c.525-200 BC)

This paper is concerned with the organization of societies in north-eastern Iberia (present-day Catalonia) during the Iron Age, using data provided by domestic architecture and settlement organization. I offer an analysis of the social differences detected in the dwellings based on a sample of houses excavated at different types of settlement. Although many Iberian houses had simple layouts and small surface areas, some larger dwellings at the main sites are distinguished by the shape of their ground plans, their surface areas, architectural features, and central locations; these houses are believed to be the residences of the Iberian elite. Such dwellings are not found at all sites and the data suggest that there was a relationship between the category of the settlement (or its function) and the types of dwelling in it.

Hispania en las provincias occidentales del imperio durante la república y el alto imperio: una perspectiva arqueológica

El siguiente trabajo repasa los procesos y acontecimientos clave de la incidencia de Roma en la península Ibérica –en las denominadas «provincias hispanas»–, con especial atención al espacio comprendido entre el desembarco de Escipión en Emporion (218 a.C.) y el reinado de Adriano, por tanto, durante la República y el Alto Imperio. A partir de la documentación arqueológica y, en ocasiones, epigráfica, se esboza un panorama de la romanización peninsular partiendo de los acontecimientos más representativos de la misma y de sus huellas más evidentes. De igual modo, la bibliografía ofrecida pretende aportar la luz de las últimas novedades sobre la cuestión.