Organizational, direct support, and general support maintenance repair parts and special tools lists (including depot maintenance allowances) for hull, suspension, and miscellaneous components of hull for armored reconnaissance/airborne assault vehicle, full tracked, 152 mm, M551 (2350-00-873-5408) and M551A1 (2350-00-140-5151).

"September 1975."

Direct support and general support maintenance manual for hull, powerpack, drive controls, tracks, suspension, and associated components : carrier, ammunition, tracked : M992 (NSN 2350-01-110-4660).

"October 1985."

Direct support and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools lists) : truck, lift, fork, diesel engine, pneumatic-tired wheels, rough terrain, 10,000 lb. capacity, 24 in. load center, Army model MHE 199, NSN 3930-00-903-0899 ....

Includes index.

Direct support and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools lists) : truck, lift, fork, diesel engine, pneumatic tired wheels, rough terrain, 6,000 lb. capacity, 24 in. load center ...

"Army model MHE 200, NSN 3930-00-903-0900, Anthoney model MLT-6, NSN 3930-01-054-3831, Anthoney model MLT-6 with ROPS and Army model MHE 202, NSN 3930-00-937-0220, Chrysler model MLT-6CH, NSN 3930-01-053-4823, Chrysler model MLT-6CH with ROPS and Army model MHE 222, NSN 3930-00-419-5744, Athey model ARTFT-6, NSN 3930-01-054-3830, Athey model ART FT-6 with ROPS."

Organizational maintenance repair parts and special tools list : truck, forklift, deisel engine driven, pneumatic tired wheels, rough terrain, 6,000 lb. capacity 24" load center, Anthony model MLT-6-2, Army model MHE 230, NSN 3930-00-327-1575.

"November 1982."

Special operations forces and unmanned aerial vehicles : sooner or later? /

"February 1996."

Dynamic response of materials to intense impulsive loading.

Includes bibliographical references.

Interlevel correlations of temperature and density, surface to 60 km. /

"Meteorology Division. Project 6670."

Analysis of an Intervention to Reduce Truck Drivers' Exposure to Whole-Body Vibration

Thesis (Master's)--University of Washington, 2016-06

Traffic-Related PM2.5 Air Pollution and Schools in Proximity to Major Roadways in Shanghai, China

Thesis (Master's)--University of Washington, 2016-06

Dynamic multi-resolution spatial object derivation for mobile and WWW applications

Online geographic information systems provide the means to extract a subset of desired spatial information from a larger remote repository. Data retrieved representing real-world geographic phenomena are then manipulated to suit the specific needs of an end-user. Often this extraction requires the derivation of representations of objects specific to a particular resolution or scale from a single original stored version. Currently standard spatial data handling techniques cannot support the multi-resolution representation of such features in a database. In this paper a methodology to store and retrieve versions of spatial objects at, different resolutions with respect to scale using standard database primitives and SQL is presented. The technique involves heavy fragmentation of spatial features that allows dynamic simplification into scale-specific object representations customised to the display resolution of the end-user's device. Experimental results comparing the new approach to traditional R-Tree indexing and external object simplification reveal the former performs notably better for mobile and WWW applications where client-side resources are limited and retrieved data loads are kept relatively small.

Dynamic annealing in III-nitrides under ion bombardment

We study the evolution of structural defects in AlxGa1-xN films (with x=0.0-0.6) bombarded with kilo-electron-volt heavy ions at 77 and 300 K. We use a combination of Rutherford backscattering/channeling spectrometry and cross-sectional transmission electron microscopy. Results show that an increase in Al content not only strongly enhances dynamic annealing processes but can also change the main features of the amorphization behavior. In particular, the damage buildup behavior at 300 K is essentially similar for all the AlGaN films studied. Ion-beam-produced disorder at 300 K accumulates preferentially in the crystal bulk region up to a certain saturation level (similar to50%-60% relative disorder). Bombardment at 300 K above a critical fluence results in a rapid increase in damage from the saturation level up to complete disordering, with a buried amorphous layer nucleating in the crystal bulk. However, at 77 K, the saturation effect of lattice disorder in the bulk occurs only for xgreater than or similar to0.1. Based on the analysis of these results for AlGaN and previously reported data for InGaN, we discuss physical mechanisms of the susceptibility of group-III nitrides to ion-beam-induced disordering and to the crystalline-to-amorphous phase transition. (C) 2004 American Institute of Physics.

Modelling of entrainment in industrial flotation cells: the effect of solids suspension

Solids concentration and particle size distribution gradually change in the vertical dimension of industrial flotation cells, subject primarily to the flotation cell size and design and the cell operating conditions. As entrainment is a two-step process and involves only the suspended solids in the top pulp region near the pulp-froth interface, the solids suspension characteristics have a significant impact on the overall entrainment. In this paper, a classification function is proposed to describe the state of solids suspension in flotation cells, similar to the definition of degree of entrainment for classification in the froth phase found in the literature. A mathematical model for solids suspension is also developed, in which the classification function is expressed as an exponential function of the particle size. Experimental data collected from three different Outokumpu tank flotation cells in three different concentrators are well fitted by the proposed exponential model. Under the prevailing experimental conditions, it was found that the solids content in the top region was relatively independent of cell operating conditions such as froth height and air rate but dependent on the cell size. Moreover, the results obtained from the total solids tend to be similar to those from a particular gangue mineral and hence may be applied to all minerals in entrainment calculation. (C) 2004 Elsevier Ltd. All rights reserved.

Influence of the 23 October 2002 dust storm on the air quality of four Australian cities

Widespread drought and record maximum temperatures in eastern Australia produced a large dust storm on 23 October, 2002 which traversed a large proportion of eastern Australia and engulfed communities along a 2000 km stretch of coastline from south of Sydney ( NSW) to north of Mackay ( Queensland). This event provided an opportunity for a study of the impacts of rural dust upon the air quality of four Australian cities. A simple model is used to predict dust concentrations, dust deposition rates and particle size characteristics of the airborne dust in the cities. The total dust load of the plume was 3.35 to 4.85 million tones, and assuming a ( conservative) plume height of 1500 m, 62 - 90% of this dust load was deposited in-transit to the coast. It is conservatively estimated that 3.5, 12.0, 2.1 and 1.7 kilotonnes of dust were deposited during the event in Sydney, Brisbane, Gladstone and Mackay, respectively. In the South East Queensland region, this deposition is equivalent to 40% of the total annual TSP emissions for the region. The event increased TSP, PM10 and PM2.5 concentrations and reduced the visibility beyond the health and amenity guidelines in the four cities. For example, the 24-h average PM10 concentrations in Brisbane and Mackay, were 161 and 475 mu g m(-3) respectively, compared with the Australian national ambient air quality standard of 50 mu g m(-3). The 24-h average PM2.5 concentration in Brisbane was 42 mu g m(-3), compared with the national advisory standard of 25 mu g m(-3). These rural dusts significantly increased PM10/TSP ratios and decreased PM2.5/PM10 ratios, indicating that most of the particles were between PM2.5 and PM10.

Hydrodynamics and mass transfer coefficient in three-phase air-lift reactors containing activated sludge

This study was to investigate the impacts of operating conditions and liquid properties on the hydrodynamics and volumetric mass transfer coefficient in activated sludge air-lift reactors. Experiments were conducted in internal and external air-lift reactors. The activated sludge liquid displayed a non-Newtonian rheological behavior. With an increase in the superficial gas velocity, the liquid circulation velocity, gas holdup and mass transfer coefficient increased, and the gas residence time decreased. The liquid circulation velocity, gas holdup and the mass transfer coefficient decreased as the sludge loading increased. The flow regime in the activated sludge air-lift reactors had significant effect on the liquid circulation velocity and the gas holdup, but appeared to have little impact on the mass transfer coefficient. The experimental results in this study were best described by the empirical models, in which the reactor geometry, superficial gas velocity and/or power consumption unit, and solid and fluid properties were employed. (c) 2006 Elsevier B.V. All rights reserved.