Upgrade of an experimental volumetric unit for gas adsorption equilibrium studies

In this work, a volumetric unit previously assembled by the research group was upgraded. This unit revamping was necessary due to the malfunction of the solenoid valves employed in the original experimental setup, which were not sealing the gas properly leading to erroneous adsorption equilibrium measurements. Therefore, the solenoid valves were substituted by manual ball valves. After the volumetric unit improvement its operation was validated. For this purpose, the adsorption equilibrium of carbon dioxide (CO2) at 323K and 0 - 20 bar was measured on two different activated carbon samples, in the of extrudates (ANG6) and of a honeycomb monolith (ACHM). The adsorption equilibrium results were compared with data previously measured by the research group, using a high-pressure microbalance from Rubotherm GmbH (Germany) – gravimetric. The results obtained using both apparatuses are coincident thus validating the good operation of the volumetric unit upgraded in this work. Furthermore, the adsorption equilibrium of CO2 at 303K and 0 - 10 bar on Metal-Organic Frameworks (MOFs) Cu-BTC and Fe-BTC was also studied. The CO2 adsorption equilibrium results for both MOFs were compared with the literature results showing good agreement, which confirms the good quality of the experimental results obtained in the new volumetric unit. Cu-BTC sample showed significantly higher CO2 adsorption capacity when compared with the Fe-BTC sample. The revamping of the volumetric unit included a new valve configuration in order to allow testing an alternative method for the measurement of adsorption equilibrium. This new method was employed to measure the adsorption equilibrium of CO2 on ANG6 and ACHM at 303, 323 and 353K within 0-10 bar. The good quality of the obtained experimental data was testified by comparison with data previously obtained by the research group in a gravimetric apparatus.

Molecular simulation of gas adsorption equilibria in nanoporous materials

This work is divided into two distinct parts. The first part consists of the study of the metal organic framework UiO-66Zr, where the aim was to determine the force field that best describes the adsorption equilibrium properties of two different gases, methane and carbon dioxide. The other part of the work focuses on the study of the single wall carbon nanotube topology for ethane adsorption; the aim was to simplify as much as possible the solid-fluid force field model to increase the computational efficiency of the Monte Carlo simulations. The choice of both adsorbents relies on their potential use in adsorption processes, such as the capture and storage of carbon dioxide, natural gas storage, separation of components of biogas, and olefin/paraffin separations. The adsorption studies on the two porous materials were performed by molecular simulation using the grand canonical Monte Carlo (μ,V,T) method, over the temperature range of 298-343 K and pressure range 0.06-70 bar. The calibration curves of pressure and density as a function of chemical potential and temperature for the three adsorbates under study, were obtained Monte Carlo simulation in the canonical ensemble (N,V,T); polynomial fit and interpolation of the obtained data allowed to determine the pressure and gas density at any chemical potential. The adsorption equilibria of methane and carbon dioxide in UiO-66Zr were simulated and compared with the experimental data obtained by Jasmina H. Cavka et al. The results show that the best force field for both gases is a chargeless united-atom force field based on the TraPPE model. Using this validated force field it was possible to estimate the isosteric heats of adsorption and the Henry constants. In the Grand-Canonical Monte Carlo simulations of carbon nanotubes, we conclude that the fastest type of run is obtained with a force field that approximates the nanotube as a smooth cylinder; this approximation gives execution times that are 1.6 times faster than the typical atomistic runs.

Estudo e implementação da metodologia SMED-Up na empresa Britefil, S.A.

Na globalização dos mercados económicos, as empresas têm uma enorme necessidade de reduzir os custos produtivos e aumentar a sua produtividade face à forte concorrência dos países emergentes. É neste contexto político e económico que as empresas têm de adotar estratégias para assegurar a sua sustentabilidade e competividade. O paradigma Lean Production distingue-se no meio industrial, e tem como principal objetivo reduzir os custos e eliminar os desperdícios associados ao sector. Este paradigma é apoiado em distintas ferramentas, nomeadamente, SMED. A metodologia SMED foi criada e aplicada pela primeira vez nos finais da década de cinquenta e, desde então, tem sido largamente utilizada nos setores industriais, pois permite obter vantagens ao nível da eficiência produtiva, através da redução dos custos de produção especificamente, no tempo total de mudança de ferramenta e no tamanho dos lotes, eliminando assim os custos associados a stock. A presente dissertação tem como objetivo a implementação do método proposto Single Minute Exchange of Die- Upgrade (SMED-Up). Esta metodologia é uma alteração ao método tradicional SMED, com o intuito de dar resposta à redução dos tempos de Setup, com tecnologia e métodos associados à realidade atual. Para aprovar este método, implementou-se na prensa hidráulica existente nas instalações da empresa Britefil, S.A. Fábrica Nacional de Bombas, S.A. Com base nos resultados obtidos nas quatro fases do método SMED-Up, foram desenvolvidas soluções e avaliados os respetivos impactos, a partir dos índices de desempenho do processo. Foi possível reduzir 53,0% do tempo total de mudança de molde face à situação inicial existente na empresa.

Development of new membranes based on ionic liquid materials for gas separation

In the field of energy, natural gas is an essential bridge to a clean, low carbon, renewable energy era. However, natural gas processing and transportation regulation require the removal of contaminant compounds such as carbon dioxide (CO2). Regarding clean air, the increasing atmospheric concentrations of greenhouse gases, specifically CO2, is of particular concern. Therefore, new costeffective, high performance technologies for carbon capture have been researched and the design of materials with the ability to efficiently separate CO2 from other gases is of vital importance.(...)

Gas tungsten arc welding of NiTi shape memory alloy

Shape memory alloys are characterized by the ability of recovering their initial shape after being deformed and by superelasticity. Since the discovery of these alloys, a new field of interest emerged not only for the scientific community but also to many industries. However, these alloys present poor machinability which constitute a constrain in the design of complex components for new applications. Thus, the demand for joining techniques able to join these alloys without compromising their properties became of great importance to enlarge the complexity of existing applications. Literature shows that these alloys are joined mainly using laser welding. In the present study, similar NiTi butt joints, were produced using TIG welding. The welds were performed in 1.5 mm thick plates across the rolling direction. A special fixture and gas assist device was designed and manufactured. Also a robot arm was adapted to accommodate the welding torch to assure the repeatability of the welding parameters. Welds were successfully achieved without macroscopic defects, such as pores and distortions. Very superficial oxidation was seen on the top surface due to insufficient shielding gas flow on the weld face. The welded joints were mechanically tested and structurally characterized. Testing methods were used to evaluate macro and microstructure, as well as the phase transformation temperatures, the mechanical single and cyclic behaviour and the shape recovery ability. Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), microhardness measurements were techniques also used to evaluate the welded joints. A depletion in Ni in the fusion zone was seen, as well as a shift in Ms temperature. For strain values of 4% the accumulated irrecoverable strain was of about 30% and increased with the strain imposed during cycling. Nevertheless, a complete recovery of initial shape was observed when testing the shape memory effect on a dedicated device that introduces a deformation of 6.7%. That is, the welding procedure does not remove the ability of the specimens to recover their initial shape.

O Comportamento do Consumidor Influenciado por Redes Sociais. Um Estudo de Caso das Empresas “O Boticário” e “Kiko Make Up Milano

A influência das práticas do Marketing nas redes sociais é o assunto central desta investigação. Muitos afirmam que o marketing digital afecta diretamente a vida das pessoas e consumidores. Saber em que momentos ou situações essa influência se dá é importante para estabelecer até que ponto os utilizadores permitem que o seu comportamento enquanto consumidor seja moldado. Incidindo sobre a área da cosmética, abordamos a questão da utilização de produtos de cosmética sob uma ótica sociológica que envolve desde a inserção da mulher no mercado de trabalho, os padrões de beleza existentes e o fenómeno da metrossexualidade que acontece desde os anos 2000. A investigação analisou o impacto do marketing nas redes sociais de “O Boticário” e “Kiko Make Up Milano”, duas empresas estrangeiras que actuam no mercado português de forma física e virtual. Do ponto de vista das redes sociais, o Facebook foi escolhido porque é a mais popular actualmente. A pesquisa utilizou como metodologia entrevistas e inquérito, este último alojado online. Após a realização da análise, foi constatado que “O Boticário” está mais adaptado ao mercado português, por meio de uma estratégia diferenciada, do que a “Kiko Make Up Milano”, que aplica a mesma estratégia vigente nas lojas do seu país de origem em Portugal. Foi verificado ainda que o Marketing praticado nas redes sociais aproxima as empresas do seus consumidores e muitas vezes os levam às lojas, seja para conhecer um novo produto ou para uma atitude de compra.

40 K Liquid Neon Energy Storage Unit

A thermal Energy Storage Unit (ESU) could be used to attenuate inherent temperature fluctuations of a cold finger, either from a cryocooler working or due to sudden income heat bursts. An ESU directly coupled to the cold source acts as a thermal buffer temporarily increasing its cooling capacity and providing a better thermal stability of the cold finger (“Power Booster mode”). The energy storage units presented here use an enthalpy reservoir based on the high latent heat of the liquid-vapour transition of neon in the temperature range 38 - 44 K to store up to 900 J, and that uses a 6 liters expansion volume at RT in order to work as a closed system. Experimental results in the power booster mode will be described: in this case, the liquid neon cell was directly coupled to the cold finger of the working cryocooler, its volume (12 cm3) allowing it to store 450 J at around 40 K. 10 W heat bursts were applied, leading to liquid evaporation, with quite reduced temperature changes. The liquid neon reservoir can also work as a temporary cold source to be used after stopping the cryocooler, allowing for a vibration-free environment. In this case the enthalpy reservoir implemented (24 cm3) was linked to the cryocooler cold finger through a gas gap heat switch for thermal coupling/decoupling of the cold finger. We will show that, by controlling the enthalpy reservoir’s pressure, 900 J can be stored at a constant temperature of 40 K as in a triple-point ESU.

(Non) - Demand driven servitization: strategic implications for suppliers from incorporating their customers up front

Double Degree. A Work Project, presented as part of the requirements for the Award of a Master’s Degree in Management from NOVA – School of Business and Economics and a Masters Degree in International Business, Strategy and Innovation from Maastricht University

Multi-Enzymatic Systems for Cleaning-up Synthetic Dyes from the Environment

Environmental pollution is one of the major and most important problems of the modern world. In order to fulfill the needs and demands of the overgrowing human population, developments in agriculture, medicine, energy sources, and all chemical industries are necessary (Ali 2010). Over the last century, the increased industrialization and continued population growth led to an augmented production of environmental pollutants that are released into air, water, and soil, with significant impact in the degradation of various ecosystems (Ali 2010, Khan et al. 2013).(...)

Curso clínico da dor lombar crónica após alta da fisioterapia : trajetórias de dor no follow-up aos quatro e seis meses

RESUMO:Introdução: O conhecimento acerca da influência das características dos indivíduos com dor cervical crónica (DCC) no prognóstico dos resultados alcançados com a Fisioterapia é ainda inconsistente, sendo escassos os estudos desenvolvidos neste âmbito. Objetivo: Este relatório pretende determinar se um modelo baseado em fatores de prognóstico é capaz de prever os resultados de sucesso da Fisioterapia, a curto prazo, em utentes com DCC, ao nível da incapacidade funcional, intensidade da dor e perceção global de melhoria. Metodologia: Trata-se de estudo de coorte prospetivo com 112 participantes. Os utentes foram avaliados na primeira semana de tratamento e sete semanas após o início da intervenção. Os instrumentos utilizados foram o Neck Disability Index–Versão Portuguesa (NDI-PT) e a Escala Numérica da Dor (END) nos dois momentos de avaliação, um Questionário de Caracterização Sociodemográfica e Clínica da Amostra na baseline e a Patient Global Impression Change Scale–Versão Portuguesa (PGIC-PT) no follow-up. As características sociodemográficas e clínicas foram incluídas como potenciais fatores de prognóstico e estes foram definidos com base nas diferenças mínimas clinicamente importantes (DMCI) dos instrumentos NDIPT (DMCI≥6) e END (DMCI≥2) e no critério de pontuação ≥5 na PGIC-PT. A análise dos dados foi realizada através do método de regressão logística (backward conditional procedure) para identificar as associações entre os indicadores e as variáveis de resultado (p<0.05). Resultados: Dos 112 participantes incluídos no estudo, 108 completaram o follow-up (média de idade: 51.76±10.19). No modelo multivariado relativo à incapacidade funcional, os resultados de sucesso encontram-se associados a elevados níveis de incapacidade na baseline (OR=1.123; 95% IC 1.056–1.194) e a duração da dor inferior a 12 meses (OR=2.704; 95% IC 1.138–6.424). Este modelo explica 30.0% da variância da melhoria da funcionalidade e classifica corretamente 74.1% dos utentes (sensibilidade: 75.9%; especificidade: 72.0%). O modelo relativo à intensidade da dor identificou apenas a associação do outcome com níveis elevados de intensidade da dor na baseline (OR=1.321; 95% IC 1.047–1.668), explicando 7.5% da variância da redução da mesma e classificando corretamente 68.2% dos utentes (sensibilidade: 94.4%; especificidade: 16.7%). O modelo final referente à perceção global de melhoria apresentou uma associação com a intensidade da dor na baseline (OR=0.621; 95% IC 0.465–0.829), com a presença de cefaleias e/ou tonturas (OR=2.538; 95% IC 0.987–6.526) e com a duração da dor superior a 12 meses (OR=0.279; 95% IC 0.109–0.719). Este modelo explica 27.5% da variância dos resultados de sucesso para este outcome e classifica corretamente 73.1% dos utentes (sensibilidade: 81.8%; especificidade: 59.5%). Conclusões: Utentes com DCC com elevada incapacidade na baseline e queixas de dor há menos de 12 meses apresentam maior probabilidade de obter melhorias ao nível da incapacidade funcional. Elevados níveis de intensidade da dor na baseline predizem resultados de sucesso na redução da dor após sete semanas de tratamento. Utentes com DCC com baixos níveis de dor na baseline, com cefaleias e/ou tonturas e com queixas de dor há mais de 12 meses apresentam maior probabilidade de obter uma melhor perceção de melhoria.-----------ABSTRACT: Introduction: The influence of the characteristics of individuals with chronic neck pain (CNP) on the prognosis of physiotherapy outcomes is still inconsistent, there being few studies developed in this context. Aim: This study seeks to determine whether a model based on prognostic factors can predict the short-term physiotherapy successful outcomes in CNP patients, regarding functional disability, pain intensity and perceived recovery. Methodology: This is a prospective cohort study with 112 participants. Patients were assessed during the first week of treatment and seven weeks after the start of the intervention. The instruments used were the Neck Disability Index–Portuguese Version (NDI-PT) and the Numerical Rating Scale (NRS) at both moments of assessment, a Sample Sociodemographic and Clinical Characterization Questionnaire at baseline and Patient Global Impression Change Scale–Portuguese Version (PGIC-PT) at the follow-up. The sociodemographic and clinical characteristics were included as potential predictors of successful outcomes, and these were defined on the basis of minimal clinically important differences (MCID) of NDI-PT (MCID≥6) and END (MCID≥2) and the criteria score ≥5 on the PGIC-PT. Data analysis was performed using logistic regression (backward conditional procedure) to identify associations between predictors and outcomes (p<0.05). Results: Of the 112 participants included in the study, 108 completed the follow-up (mean age: 51.76±10.19). In the multivariate model of functional disability, the successful outcomes are associated with high levels of disability at baseline (OR = 1.123; 95% CI 1.056-1.194), and pain duration shorter than 12 months (OR=2.704; 95% CI 1.138–6.424). This model explains 30.0% of the variance of improved functional capacity and correctly classifies 74.1% of the patients (sensitivity: 75.9%, specificity: 72.0%). The model for pain intensity solely identified an outcome association with high pain intensity at baseline (OR=1.321; 95% CI 1.047- 1.668), explaining 7.5% of the variance of pain reduction and correctly classifying 68.2% of the patients (sensitivity: 94.4%, specificity: 16.7%). The final model of perceived recovery showed an association with pain intensity at baseline (OR=0.621; 95% CI 0465-0829), with the presence of headache and/or dizziness (OR=2.538; 95% CI 0.987-6.526) and the duration of pain over 12 months (OR=0.279; 95% CI 0.109- 0.719). This model explains 27.5% of the variance of successful outcomes and correctly classifies 73.1% of the patients (sensitivity: 81.8%, specificity: 59.5%). Conclusions: Patients with CNP with high disability at baseline and complaints of pain for less than 12 months are more likely to obtain improvements in functional disability. High levels of pain intensity at baseline predict successful outcomes in pain reduction after seven weeks of treatment. Patients with CNP with low levels of pain at baseline, with headache and/or dizziness and with pain complaints for more than 12 months are more likely to get a better perceived recovery.

Clinical and serological evolution in chronic Chagas disease patients in a 4-year pharmacotherapy follow-up: a preliminary study

Introduction The role of trypanocidal therapy in the chronic phase of Chagas disease remains controversial. Methods A total of 13 patients with chronic Chagas disease were treated with benznidazole (5mg/kg/day/60 days) and surveyed via antibody measurement and conventional electrocardiogram over the course of 4 years. Results The antibody titers were significantly reduced after 4 years (p<0.05). Most of the patients showed maintenance of the initial clinical picture (electrocardiographic), with the exception of 4 cases. Conclusions Although trypanocidal therapy in the chronic phase of Chagas disease was of limited effectiveness, we believe that it is beneficial in treating these patients.

Evaluation of long term persistence of Diabetes Mellitus Type II treatment newly diagnosed patients in Lisbon and Tagus health administration region : a three year follow up study

RESUMO: Raional: A persistência à terapêutica é o tempo em qualquer antidiabético oral, desde o seu início até à descontinuação de todas as medicações ou até ao fim do período do estudo. Os objetivos deste estudo foi a análise da persistência à terapêutica no segundo e terceiro anos após início do tratamento em doentes adultos diagnosticados na região de Lisboa e Vale do Tejo e determinar o efeito de determinadas variáveis na persistência a longo prazo. Métodos: Um estudo retrospetivo não interventivo foi desenhado com base nos dados a obter do SIARS (prescrições e aquisições na farmácia) e Pordata. A persistência foi quantificada como a percentagem de doentes que continuam a adquirir pelo menos um antidiabético oral ao segundo e terceiro anos após a compra da primeira receita. A associação entre a persistência e o segundo e terceiro anos com cada uma das co-variáveis foi aferido pelo teste qui-quadrado e os odd ratios foram calculados com recurso a um modelo de regressão logística. Resultados: A persistência à terapêutica obtida foi de 80% e 62% para o segundo e terceiro anos após início da terapêutica. Odd ratios para primeiro e segundo ano: número de grupos farmacoterapêuticos diferentes (OR = 2.167, 1.807 – 2.598, p = 0.000 / OR = 1.863, 1.621 – 2.142, p = 0.000); idade (OR = 0.914, 0.772 – 1.081, p = 0.294 / OR = 0.875, 0.764 – 1.002, p = 0.054); sexo (OR = 1.163, 0.983 – 1.377, p = 0.079); número de diferentes prescritores (OR = 3.594, 3.030 – 4.262, p = 0.000 / OR = 2.167, 1.886 – 2.491, p = 0.000); instituição de prescrição (OR = 0.725, 0.698 – 0.753, p = 0.000 / OR = 0.683, 0.650 – 0.717, p = 0.000); grupo farmacoterapêutico (OR = 1.056, 1.043 – 1.069, p = 0.000 / OR = 1.077, 1.060 – 1.095, p = 0.000); relação com o médico (OR = 0.834, 0.816 – 0.852, p = 0.000 / OR = 0.799, 0.777 – 0.821, p = 0.000) e custo médio mensal por grupo farmacoterapêutico (OR = 0.954, 0.942 – 0.968, p = 0.000 / OR = 0.930, 0.914 – 0.947, p = 0.000). Conclusões: O valor da persistência à terapêutica no segundo ano é ligeiramente acima do que é mencionado na literatura e não existem dados para comparar os resultados do terceiro ano. Relativamente ao efeito das co-variáveis no segundo e terceiro anos após o início do tratamento, os resultados são sobreponíveis, sendo que o sexo não está associado à persistência ao terceiro ano.----------------------------------ABSTRACT: Background: Therapy persistence is the time on any antidiabetic medication, from initiation of therapy to discontinuation of all medications or the end of the study period. The aim of the study was to analyse the therapy persistence in the second and third years after treatment initiation in newly diagnosed adult patients in the Lisbon and Tagus Valley region and to determine the effect of several co-variables in the long term persistence. Methods: A retrospective non-interventional study based on SIARS data (drug prescriptions and acquisitions) and Pordata was designed. Persistence was quantified as the percentage of patients that continued to purchase at least one type of antidiabetic at year 2 and 3 after the date of first prescription acquisition. Association between persistence at second and third years with each of the other co-variables were verified by using the Chi-Square test and odds ratio were calculated using a regression logistic model. Results: Therapy persistence obtained was 80% and 62% for the second and third years after treatment initiation. Odd ratios for second and third years: number of different pharmacotherapeutic groups (OR = 2.167, 1.807 – 2.598, p = 0.000 / OR = 1.863, 1.621 – 2.142, p = 0.000); age (OR = 0.914, 0.772 – 1.081, p = 0.294 / OR = 0.875, 0.764 – 1.002, p = 0.054); gender (OR = 1.163, 0.983 – 1.377, p = 0.079); number of different prescribers (OR = 3.594, 3.030 – 4.262, p = 0.000 / OR = 2.167, 1.886 – 2.491, p = 0.000); institution of prescription (OR = 0.725, 0.698 – 0.753, p = 0.000 / OR = 0.683, 0.650 – 0.717, p = 0.000); pharmacotherapeutic group (OR = 1.056, 1.043 – 1.069, p = 0.000 / OR = 1.077, 1.060 – 1.095, p = 0.000); relationship with the physician (OR = 0.834, 0.816 – 0.852, p = 0.000 / OR = 0.799, 0.777 – 0.821, p = 0.000) and average cost per month and per pharmacotherapeutic group (OR = 0.954, 0.942 – 0.968, p = 0.000 / OR = 0.930, 0.914 – 0.947, p = 0.000). Conclusions: Second year therapy persistence value is slightly above of what is referenced in literature and no data was found to compare the third year value. Regarding the effect of the co-variables analysed at second and third years after treatment initiation, the results were overlapping with gender being not associated with persistence at the third year.

How to engage low category users through social media- The case of the make-up sector in Portugal

Purpose: This work project should be inevitably deemed as a practical approach to a marketing problem; “How to engage low category users through the social media – the case of the make-up sector in Portugal”. Design/methodology/approach: Online structured questionnaires and in-depth interviews were used. The questionnaire was answered by 110 women aged from 15 to 45 years old and the interviews were conducted with 14 women of the same age. The interviews provided key insights for the questionnaire formulation. Findings: Women are poorly informed on make-up properties and characteristics, feeling a genuine concern in regard to this subject. Lack of time, occasional usage and skin damage are the main barriers for make-up usage by low category users. Overcoming these aspects pass by demystifying the association of make-up with skin damage and emphasise the functional and emotional benefits of make-up. Further, brands need to create contents more consumer-oriented and ask directly to fans/followers suggestions and other insights. Resort to Portuguese “common” women for greater empathy in campaigns, promote online meetings between followers and make-up professionals on social media; and finally take advantage of the hybrid condition of Facebook, which incorporates multiple forms of content presentation, including videos, the most appealing format of make-up presentation for women. Research limitations/implications: Further studies addressing this topic, by using larger samples and study of specific make-up brands and campaign programs, over social media to reach a solid growth potential of make-up market evidences in Portugal. Originality/ value: Make-up brands are emphasising their interest in linking social media and marketing their promotional mix around social marketing.

Galp Energia Oil & Gas

Equity research report