Accelerating food safety and quality control: The use of antibody engineering techniques in the detec-tion of low-molecular weight food contaminants

The increased awareness and evolved consumer habits have set more demanding standards for the quality and safety control of food products. The production of foodstuffs which fulfill these standards can be hampered by different low-molecular weight contaminants. Such compounds can consist of, for example residues of antibiotics in animal use or mycotoxins. The extremely small size of the compounds has hindered the development of analytical methods suitable for routine use, and the methods currently in use require expensive instrumentation and qualified personnel to operate them. There is a need for new, cost-efficient and simple assay concepts which can be used for field testing and are capable of processing large sample quantities rapidly. Immunoassays have been considered as the golden standard for such rapid on-site screening methods. The introduction of directed antibody engineering and in vitro display technologies has facilitated the development of novel antibody based methods for the detection of low-molecular weight food contaminants. The primary aim of this study was to generate and engineer antibodies against low-molecular weight compounds found in various foodstuffs. The three antigen groups selected as targets of antibody development cause food safety and quality defects in wide range of products: 1) fluoroquinolones: a family of synthetic broad-spectrum antibacterial drugs used to treat wide range of human and animal infections, 2) deoxynivalenol: type B trichothecene mycotoxin, a widely recognized problem for crops and animal feeds globally, and 3) skatole, or 3-methyindole is one of the two compounds responsible for boar taint, found in the meat of monogastric animals. This study describes the generation and engineering of antibodies with versatile binding properties against low-molecular weight food contaminants, and the consecutive development of immunoassays for the detection of the respective compounds.

Näin opetan lisäävää valmistusta ja 3D-tulostusta: Pohdintoja uuden teknologian opetuksesta ja koulutuksesta

Additive manufacturing (shortened as AM), or more commonly 3D printing, consists of wide variety of different modern manufacturing technologies. AM is based on direct printing of a digital 3D model to a final product which is fabricated adding material layer by layer. This is from where term additive manufacturing has its origin. It is not only material what is added, but it is also value, properties etc. which are added. AM enables production of different and even better products compared to conventional manufacturing technologies. An estimation of potential of additive manufacturing can be gathered by considering the potential of laser cutting, which is one of the most widely used modern manufacturing technologies. This technique has been used over 40 years, and whole market around this technology is at the moment c. four billion euros and yearly growth is around 10 %. One factor affecting this success of laser cutting is that laser cutting enables radical improvements to products made of flat sheet. AM and 3D printing will do the same for three dimensional parts. Laser devices, which are at the moment used in 3D printing, are globally at the moment only around 1% of all laser devices used in any fabrication technology, so even with a cautious estimate the potential growth of at least 100 % is coming in next few years. Role of education is very important, when this kind of modern technology is industrially implemented. When both generation entering to work life and also generation who has been a while in work life understands new technology, its potential and limitations, this is the point when also product design can be rethought Potential of product design is driving force for wide use of additive manufacturing and 3D printing. Utilization of additive manufacturing and 3D printing is also opportunity for Finland and Finnish industry. This technology can save Finnish manufacturing industry. This technique has stron potential, as Finland has traditionally strong industrial know-how and good ICT knowledge.

Foreign Divestment Decisions in Banking − Case Nordea in Poland

In the 21st century, the realignment of multinational companies’ business scope has become a major issue globally. A very prominent part of the global realignment process, alongside with mergers, acquisitions and alliances, are foreign divestments. Foreign divestments have become an integral aspect of international business since they are now widely practiced by MNCs from a growing and diverse range of home countries and host economies. The objective of this thesis is to identify the factors that contribute to foreign divestment decisions in the banking sector. This thesis is a qualitative research with a single case study approach. The chosen case of this thesis is the divestment made by the internationally operating Nordic financial service group, Nordea, in Poland in 2013. The empirical findings were obtained by interviewing experts from the case company and the interviews were conducted as theme interviews using the four themes that according to the theoretical framework of this thesis are the contributing factors in foreign divestment decisions: (1) environmental stability, (2) attractiveness of current operations, (3) strategic fit, and (4) governance issues. The empirical findings of this thesis suggest that there were four dominant contributors to the foreign divestment decision of the case company: (1) host government regulations, (2) strategic considerations, (3) economic outlook, and (4) interested buyer. The empirical findings mostly support the accuracy of the selected framework as the first three theme groups were found to be major contributors also in the case company’s foreign divestment. However, the importance of the fourth theme group, ‘governance issues’, is not supported by the findings of this thesis. Furthermore the findings suggest that in addition to the groups presented in the framework, also timing can be an import factor in divestment decisions. Three managerial recommendations can be drawn from the findings of this thesis: (1) If a foreign divestment decision is the best course of action due to strategic reasons, it should not be avoided; (2) The pre-investment due diligence processes should not be ignored since it can help to avoid unwanted divestments; and (3) Companies should concentrate on building good relationships with the host government since it can facilitate business activities in the host country.

Developing Global Sourcing

Global Sourcing has gained popularity among Multinational Corporations as a method to achieve competitive advantage in increasingly competitive international environment. However, the companies pursuing coordinated global sourcing strategies in many cases tend to overlook many potential synergies from global sourcing. The objective of this research is to identify development areas in which the case company can further improve its conduct regarding global sourcing. This thesis was done as a case study for a MNC with business units across the world. The data used to analyse the case company is based on personal observations of the researcher, company’s material regarding its global sourcing, and on themed interviews and discussions with the company’s purchasing personnel. The analyses of this research are qualitative in nature, relying on subjective observations of the researcher. The research revealed that the case company has room for improvement in many of the identified success factors of global sourcing. One main recommendation of the thesis is to introduce portfolio-tool to identify synergy areas from global sourcing in a more systematic manner. In addition, the thesis proposes that information-processing framework can help the case company design more effective integration mechanisms that are required to process complex information emerging when sourcing globally.

Consumer neuroscience: usability of brain imaging methods in marketing research

Consumer neuroscience (neuromarketing) is an emerging field of marketing research which uses brain imaging techniques to study neural conditions and processes that underlie consumption. The purpose of this study was to map this fairly new and growing field in Finland by studying the opinions of both Finnish consumers and marketing professionals towards it and comparing the opinions to the current consumer neuroscience literature, and based on that evaluate the usability of brain imaging techniques as a marketing research method. Mixed methods research design was chosen for this study. Quantitative data was collected from 232 consumers and 28 marketing professionals by means of online surveys. Both respondent groups had either neutral opinions or lacked knowledge about the four themes chosen for this study: benefits, limitations and challenges, ethical issues and future prospects of consumer neuroscience. Qualitative interview data was collected from 2 individuals from Finnish neuromarketing companies to deepen insights gained from quantitative research. The four interview themes were the same as in the surveys and the interviewees’ answers were mostly in line with the current literature, although more optimistic about the future of the field. The interviews also exposed a gap between academic consumer neuroscience research and practical level applications. The results of this study suggest that there are still many unresolved challenges and relevant populations either have neutral opinions or lack information about consumer neuroscience. The practical level applications are, however, already being successfully used and this new field of marketing research is growing both globally and in Finland.

Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

Palveluruokamarkkinoiden innovatiivisen toimintamallin suunnittelu

Diplomityön tavoitteena on ollut kehittää elintarvikeyrityksen palveluruokamarkkinoille uusi innovatiivinen toimintamalli haastattelujen, havainnoinnin ja kirjallisuuden perusteella. Tutkimusongelman päätutkimuskysymys on: Miten yrityksen palveluruoka- eli valmisruokatuotteille suunnitellaan innovatiivinen toimintamalli tuoteperheen ja jakelun suhteen? Tavoitteena on kartoittaa yrityksen palveluruoan nykytilanne ja luoda toimintamalli, joka toisi yritykselle selkeää lisäarvoa ja kilpailuetua. Teoreettisessa osuudessa selvitetään elintarviketeollisuuden, valmisruoan ja elintarvikelogistiikan tilannetta suomalaisesta ja globaalista näkökulmasta. Työssä on tarkasteltu elintarvikepuolen nykytilannetta ja tulevaisuuden suuntauksia tuotteiden, ruokailutottumusten ja logistiikan osalta. Innovaatioiden osalta työ painottuu palveluruokapuolen konseptin ja uuden logistisen yhteistyöhön pohjautuvan mallin kehittämiseen. Työn käytännön osiossa on tehty case-tutkimus ”yrityksen palveluruoan nykytilanne tuotteiden ja logistiikan osalta”. Toimialan markkinatilannetta on kartoitettu, jotta hahmotetaan, missä on potentiaalisimmat markkinat palveluruoalle. Työn tavoitteena on ollut kehittää Hoviruoka Oy:lle palveluruoan segmentointiin ja logistiikkaan liittyvä innovatiivinen toimintamalli. Toimintamallin avulla yritys saa kilpailuetua ja taloudellista hyötyä kilpailijoihin nähden, ja on edelläkävijä kyseisen toimintamallin ansiosta. Työn tuloksissa on käsitelty keskeiset tulokset ja mahdolliset jatkotoimenpiteet. Työssä kehitettiin yritykselle uusi toimintamalli palveluruoka puolelle. Työlle asetetut tavoitteet saavutettiin kaikkien kolmen - tekijän, yliopiston ja yrityksen - kannalta.

Effects of bank supervision and regulation on bank risk

In the last few decades, banking has strongly internationalized and become more complex. Hence, bank supervision and regulation has taken global perspective, too. The most important international regulation are the Basel frameworks by the Basel committee on banking supervision. This study examines the effects of bank supervision and regulation, especially the Basel II, on bank risk and risk-taking. In order to separate and recognize the efficiency of these effects, the co-effects of many supervisory and regulatory tools together with other relevant factors must be taken into account. The focus of the study is on the effects of asymmetric information and banking procyclicality on the efficiency of the Basel II. This study tries to find an answer, if the Basel II, implemented in 2008, has decreased bank risk in banks of European Union member states. This study examines empirically, if the volatility on bank stock returns have changed after the implementation of the Basel II. Panel data consists of 62 bank stock returns, bank-specific variables, economic variables and variables concerning regulatory environment between 2003 and 2011. Fixed effects regression is used for panel data analysis. Results indicate that volatility on bank stock returns has increased after 2008 and the implementation of the Basel II. Result is statistically very significant and robustness has been verified in different model specifications. The result of this study contradicts with the goal of the Basel II about banking system stability. Banking procyclicality and wrong incentives for regulatory arbitrage under asymmetric information explained in theoretical part may explain this result. On the other hand, simultaneously with the implementation of the Basel II, the global financial crisis emerged and caused severe losses in banks and increased stock volatility. However, it is clear that supervision and regulation was unable to prevent the global financial crisis. After the financial crisis, supervision and regulation have been reformed globally. The main problems of the Basel II, examined in the theoretical part, have been recognized in order to prevent problems of procyclicality and wrong incentives in the future.

Opportunity meets uncertainty. Towards sustainable business in the Arctic region

The Arctic region is experiencing a significant change in terms of climate change and a growing economic interest towards its natural resources and emerging business opportunities. The purpose of this study is to explore how can Finnish companies create sustainable business in the Arctic. This is done by examining the arctic business environment, identifying sectors with growth potential, addressing challenges related to operating in the Arctic and suggesting how to ensure sustainability and succeed in the globally competed arctic market. The theoretical framework is based on theories of sustainable development, corporate social responsibility and the role of strategy in creating sustainable business. Empirical data was collected by using qualitative research methods: first, background knowledge was formed based on written documents and, secondly, six expert interviews were conducted in early 2014. The interviewees represented the viewpoints of companies, political decision makers and NGO’s. The analysis of the data was conducted using thematic categorization. The empirical findings of the study suggest that in order to create sustainable business in the Arctic companies should adopt a long-term perspective, embrace a holistic approach to sustainability, understand interdependencies between the dimensions of sustainability and aim at high-level engagement in responsible behavior. To succeed in the arctic market core competencies, customer needs, multivendor cooperation and long-term presence need to be invested in on a company level. In addition, to promote and advance arctic development on a national level support is needed in terms of investments in infrastructure, funding research and design, creating a regulative framework and removing barriers of trade.

Language shifting among the Hodenosaunee of Southern Ontario : Edwaenagé: tsgó -- Shogwaya> dihs> oh nidwawenó :de: shogwá:wi: tsáhohwejáda:t

Through aggressive legislative and educational policies Indigenous languages globally have been shifted to the language of the dominant society. Globalization has brought previously geo-politically and/or geo-linguistically isolated people and language . groups into close proximity that necessitated interaction and at times intense power struggles. There are currently approximately 6,000 spoken languages in the world, more than half are either endangered, dying or disappearing altogether. Canadian statistics reveal an overall 3 % decline in the intergenerational transmission of language. Of the original 60 Indigenous languages spoken in Canada, 8 are extinct, 13 are nearly extinct, and 23 are critical. The remaining languages have a slim chance of survival. Within the next 100 years only 4 Indigenous languages will remain. The Hodenosaunee languages of Southern Ontario are not incl~ded among the list of languages that will survive the next 100 years. There are, without a doubt, complex challenges in the maintenance of Indigenous languages within a dominant-culture influenced environment. Given the increasing awareness of the social impact of linguistic integrity and preservation of languages on Indigenous people as a whole, this study considers how language is currently being used; the social, economic, and political implications of language shifting; the need to shift our social consciousness in order to understand the urgency in privileging our Hodenosaunee languages; as well as ways in which we might achieve those goals as individuals, as families, and as a community.

Global migration : patriarchy, propoganda and the well- being of women and children

This critical analysis explores the conflicted position of women as ''trailing spouses" and the effects on families who relocate globally under the auspices of a multinational corporation, by utilizing a discursive analysis of two contemporary films and available literature. Current portrayals of women and children in contemporary media provide emotional yet conflicting images of the perfect woman, wife, mother, child and family. The basic tenets of a North American patriarchal economic system are being televised around the world. Technological advancements have made it possible to advertise political agendas on a global television screen. Much of what we see is propaganda couched in films and advertisements that are designed to romantic~e the practice of deriving profits from the unpaid labor of woman and invisibility of children and child rearing. I intend to show that the materiality of trailing a spouse globally conflicts with these romanticized images and supports feminist literature that asserts the notion that mothers and children are oppressed and managed for the benefit of capital.

Sport for Development Organizations: An Analysis of Stakeholder Dynamics

Sport for Development (SFD) uses the power of sport to support international development initiatives that affect social change and empower under-resourced communities (Levermore, 2008a). Currently, there are more than 1,000 SFD organizations globally (Doyle, Payne, & Wolff, 2011) working to enact change and development initiatives in the least developed regions of the world. Stakeholders are key components of the long-term sustainability, development, and success of these SFD organizations. The purpose of this research is to examine the relationships between SFD organizations and their stakeholders through the lens of social responsibility (SR). Through the analysis of interviews conducted with SFD leaders and their stakeholders, this research offers a modified version of Carroll’s (1979) four categories of SR. This modified version addresses the differences that exist with SFD stakeholder relationships from the perspectives of the organizations and their stakeholders. Further, broader implications will be discussed in terms of compatibility and long-term sustainability.

Individual Differences in Global/Local Processing Bias and the Attentional Blink

When the second of two targets (T2) is presented temporally close to the first target (T1) in rapid serial visual presentation, accuracy to detect/identify T2 is markedly reduced as compared to longer target separations. This is known as the attentional blink (AB), and is thought to reflect a limitation of selective attention. While most individuals show an AB, research has demonstrated that individuals are variously susceptible to this effect. To explain these differences, Dale and Arnell (2010) examined whether dispositional differences in attentional breadth, as measured by the Navon letter task, could predict individual AB magnitude. They found that individuals who showed a natural bias toward the broad, global level of Navon letter stimuli were less susceptible to the AB as compared to individuals who showed a natural bias toward the detailed, local aspects of Navon letter stimuli. This suggests that individuals who naturally broaden their attention can overcome the AB. However, it was unclear how stable these individual differences were over time, and whether a variety of global/local tasks could predict AB performance. As such, the purpose of this dissertation was to investigate, through four empirical studies, the nature of individual differences in both global/local bias and the AB, and how these differences in attentional breadth can modulate AB performance. Study 1 was designed to examine the stability of dispositional global/local biases over time, as well as the relationships among three different global/local processing measures. Study 2 examined the stability of individual differences in the AB, as well as the relationship among two distinct AB tasks. Study 3 examined whether the three distinct global/local tasks used in Study 1 could predict performance on the two AB tasks from Study 2. Finally, Study 4 explored whether individual differences in global/local bias could be manipulated by exposing participants to high/low spatial frequencies and Navon stimuli. In Study 1, I showed that dispositional differences in global/local bias were reliable over a period of at least a week, demonstrating that these individual biases may be trait-like. However, the three tasks that purportedly measure global/local bias were unrelated to each other, suggesting that they measure unique aspects of global/local processing. In Study 2, I found that individual variation in AB performance was also reliable over a period of at least a week, and that the two AB task versions were correlated. Study 3 showed that dispositional global/local biases, as measured by the three tasks from Study 1, predicted AB magnitude, such that individuals who were naturally globally biased had smaller ABs. Finally, in Study 4 I demonstrated that these dispositional global/local biases are resistant to both spatial frequency and Navon letter manipulations, indicating that these differences are robust and intractable. Overall, the results of the four studies in this dissertation help clarify the role of individual differences in attentional breadth in selective attention.

Feeding and oviposition preferences of the diamondback moth Plutella xylostella (Lepidoptera: Plutellidae) on six Brassicaceae host plant species

Plutella xylostella (diamondback moth, DBM) is a globally distributed Lepidopteran that feeds and oviposits almost exclusively on plants in the Brassicaceae family. DBM disperses from the southern United States and Mexico into Canada in the spring and summer. Establishment of DBM in Ontario is partially dependent upon the quantity and quality of host plants available and the preference of DBM for different hosts. Host plants include many crops such as broccoli, canola and cabbage, as well as landscape ornamentals and wild plants. It has previously been established that DBM are attracted to host plants by chemicals, specifically glucosinolates. I examined the preference of DBM among crop, wild and ornamental host plant species and how preference varies with insect life stage (3rd and 4th instar larvae and adults). Experiments included exposing DBM larvae from five populations coming from different locations in Canada to six Brassicaceae species and evaluating the preferences and weight gain over one hour. Then adult females were exposed to these same plant species and their oviposition preferences were examined. Populations from Alberta, Saskatchewan and Ontario were compared to assess differences in preference associated with geographic region or species of host plant. The ultimate goal of my study was to understand the potential of various Brassicaceae species to act as reservoirs to sustain and promote population growth of DBM, as well as sinks that may decrease DBM abundance. Results showed that garden cress (Lepidium sativum) was highly preferred over other species (wintercress, black mustard, aubretia, broccoli and ornamental kale) for both food and oviposition sources. Previous studies report that garden cress contains saponins, chemicals shown to be toxic to developing DBM larvae, however no studies have yet shown a preference for garden cress. These results provide information on a novel host plant with the potential to control DBM population growth. No difference in preferences was found among populations of DBM from various sources in Canada.

Potential Urinary Protein Biomarker Candidates for the Accurate Detection of Prostate Cancer among Benign Prostatic Hyperplasia Patients

Globally, Prostate cancer (PCa) is the most frequently occurring non-cutaneous cancer, and is the second highest cause of cancer mortality in men. Serum prostate specific antigen (PSA) has been the standard in PCa screening since its approval by the American Food & Drug Administration (FDA) in 1994. Currently, PSA is used as an indicator for PCa - patients with a serum PSA level above 4ng/mL will often undergo prostate biopsy to confirm cancer. Unfortunately fewer than similar to 30% of these men will biopsy positive for cancer, meaning that the majority of men undergo invasive biopsy with little benefit. Despite PSA's notoriously poor specificity (33%), there is still a significant lack of credible alternatives. Therefore an ideal biomarker that can specifically detect PCa at an early stage is urgently required. The aim of this study was to investigate the potential of using deregulation of urinary proteins in order to detect Prostate Cancer (PCa) among Benign Prostatic Hyperplasia (BPH). To identify the protein signatures specific for PCa, protein expression profiling of 8 PCa patients, 12 BPH patients and 10 healthy males was carried out using LC-MS/MS. This was followed by validating relative expression levels of proteins present in urine among all the patients using quantitative real time-PCR. This was followed by validating relative expression levels of proteins present in urine among all the patients using quantitative real time-PCR. This approach revealed that significant the down-regulation of Fibronectin and TP53INP2 was a characteristic event among PCa patients. Fibronectin mRNA down-regulation, was identified as offering improved specificity (50%) over PSA, albeit with a slightly lower although still acceptable sensitivity (75%) for detecting PCa. As for TP53INP2 on the other hand, its down-regulation was moderately sensitive (75%), identifying many patients with PCa, but was entirely non-specific (7%), designating many of the benign samples as malignant and being unable to accurately identify more than one negative.