Kipsin kiteytymiseen vaikuttavat tekijät ammoniumsulfaattikiteyttämön lämmönvaihtimissa

Työssä pyrittiin selvittämään syitä kipsin saostumiseen ammoniumsulfaattikiteyttämön putkilämmönvaihtimien pinnalle ja miten epätoivottua saostumista voitaisiin estää. Lämmönvaihtimissa virtaa ammoniumsulfaattia, jossa on epäpuhtautena kalsiumia, joka saostuu pinnoille kalsiumsulfaattina. Kirjallisuusosassa tarkasteltiin kiteytymisen mekanismia ja kipsin kiteytymiseen vaikuttavia tekijöitä. Saostumien estoaineita ja niiden vaikutusta kipsin kiteytymiseen sekä kipsin liukoisuutta ammoniumsulfaattiliuoksessa käsiteltiin myös kirjallisuusosassa. Kipsin kiteytymiseen vaikuttavia tekijöitä selvitettiin laboratoriokokeilla, joissa pyrittiin simuloimaan lämmönvaihdinta lämpövastuksella. Laboratoriokokeissa kokeiltiin erilaisia saostuman estoaineita ja pyrittiin löytämään prosessiin mahdollisimman tehokas kipsin kiteytymisen estoaine. Lämmönvaihtimien toiminnan tehokkuutta eli muodostuneen saostuman vaikutusta lämmönsiirtymiseen tutkittiin veden luovuttaman lämpövirran avulla. Lämmönvaihtimien tukkeutumista selvitettiin putkien vaihdon tarpeen perusteella. Kalsiumpitoisuuden vaihteluja prosessivirroissa selvitettiin kalsiumtaseen avulla. Saostumiseen vaikuttavien tekijöiden lisäksi selvitettiin mistä ja kuinka paljon kalsiumia kulkeutuu prosessiin ja poistuu sieltä. Työn tarkoituksena oli löytää ratkaisu, jolla epätoivottua saostumista lämmönvaihdin-ten pinnoille pystyttäisiin vähentämään joko kemiallisesti tai muuttamalla prosessi-muuttujia. Kalsiumia havaittiin olevan eniten pelkistämön sisäisissä ammoniumsul-faattiliuoskierroissa. Kalsiumtaseen perusteella kalsiumia poistuu pelkistämöltä eniten kipsinä ammoniumsulfaattituotteen mukana. Laboratoriokokeissa havaittiin polykar-boksylaattien estävän kipsin kasvua parhaiten, joskin estoaineen oikealla annostuksel-la havaittiin olevan suuri vaikutus. Lämmönvaihtimien saostuman havaittiin olevan kipsin ja glauberiitin seos. Vaippapuolen luovuttamien lämpövirran arvojen perusteel-la pystyttiin seuraamaan putkien tukkeutumista.

Radial displacement of a fluid annulus in a rotating Hele-Shaw cell

The radial displacement of a fluid annulus in a rotating circular HeleShaw cell has been investigated experimentally. It has been found that the flow depends sensitively on the wetting conditions at the outer interface. Displacements in a prewet cell are well described by Darcy"s law in a wide range of experimental parameters, with little influence of capillary effects. In a dry cell, however, a more careful analysis of the interfacemotion is required; the interplay between a gradual loss of fluid at the inner interface, and the dependence of capillary forces at the outer interface on interfacial velocity and dynamic contact angle, result in a constant velocity for the interfaces. The experimental results in this case correlate in the form of an empirical scaling relation between the capillary number Ca and a dimensionless group, related to the ratio of centrifugal to capillary forces, which spans about three orders of magnitude in both quantities. Finally, the relative thickness of the coating film left by the inner interface is obtained as a function of Ca.

Questions of Scale in Economic Experiments

Questions of scale have received ample attention in physical scale modeling and experimentation, but have not been discussed with regard to economic experimentation. In this article I distinguish between two kinds of experiments, "generic" and "specific" experiments. Using a comparison between two experimental laboratory studies on the "posted price effect", I then show that scale issues become important in specific laboratory experiments because of the scaling down of time in the target market to laboratory dimensions. This entails choices in the material configuration of the experiment as well as role changes of experimental subjects. My discussion thus adds to recent literature on external validity and on the materiality of experiments.

Fast and economic immobilization methods described for non-commercial Pseudomonas lipases

There is an increasing interest to seek new enzyme preparations for the development of new products derived from bioprocesses to obtain alternative bio-based materials. In this context, four non-commercial lipases from Pseudomonas species were prepared, immobilized on different low-cost supports, and examined for potential biotechnological applications. Results: To reduce costs of eventual scaling-up, the new lipases were obtained directly from crude cell extracts or from growth culture supernatants, and immobilized by simple adsorption on Accurel EP100, Accurel MP1000 and Celite (R) 545. The enzymes evaluated were LipA and LipC from Pseudomonas sp. 42A2, a thermostable mutant of LipC, and LipI. 3 from Pseudomonas CR611, which were produced in either homologous or heterologous hosts. Best immobilization results were obtained on Accurel EP100 for LipA and on Accurel MP1000 for LipC and its thermostable variant. Lip I. 3, requiring a refolding step, was poorly immobilized on all supports tested ( best results for Accurel MP1000). To test the behavior of immobilized lipases, they were assayed in triolein transesterification, where the best results were observed for lipases immobilized on Accurel MP1000. Conclusions: The suggested protocol does not require protein purification and uses crude enzymes immobilized by a fast adsorption technique on low-cost supports, which makes the method suitable for an eventual scaling up aimed at biotechnological applications. Therefore, a fast, simple and economic method for lipase preparation and immobilization has been set up. The low price of the supports tested and the simplicity of the procedure, skipping the tedious and expensive purification steps, will contribute to cost reduction in biotechnological lipase-catalyzed processes.

Tipping the scales: Evolution of the allometric slope independent of average trait size.

The scaling of body parts is central to the expression of morphology across body sizes and to the generation of morphological diversity within and among species. Although patterns of scaling-relationship evolution have been well documented for over one hundred years, little is known regarding how selection acts to generate these patterns. In part, this is because it is unclear the extent to which the elements of log-linear scaling relationships-the intercept or mean trait size and the slope-can evolve independently. Here, using the wing-body size scaling relationship in Drosophila melanogaster as an empirical model, we use artificial selection to demonstrate that the slope of a morphological scaling relationship between an organ (the wing) and body size can evolve independently of mean organ or body size. We discuss our findings in the context of how selection likely operates on morphological scaling relationships in nature, the developmental basis for evolved changes in scaling, and the general approach of using individual-based selection experiments to study the expression and evolution of morphological scaling.

Colony-colony interactions between highly invasive ants

Among invasive species, ants are a particularly prominent group with enormous impacts on native biodiversity and ecosystem functioning. Globalization and on-going climate change are likely to increase the rate of ant invasions in the future, leading to simultaneous introductions of several highly invasive species within the same area, Here, we investigate pairwise interactions among four highly invasive species, Linepithema humile,Lashis neglectus, Pheidole megacephala and Wasmannia auropunctata, at the whole colony level, using a laboratory set-up. :Each colony consisted of 300 workers and one queen. The number of surviving workers in the competing colonies was recorded daily over 7 weeks. We modelled the survival of each colony during pairwise colony interactions, using a nonlinear model characterizing the survival dynamics of each colony individually. The least dominant species was P. megacephala, which always went extinct. Interactions among the three other species showed more complex dynamics, rendering the outcome of the interactions less predictable. Overall, W auropunctata and L neglectus were the most dominant species. This study shows the importance of scaling up to the colony level in order to gain realism in predicting the outcome of multiple invasions.

Cost-effectiveness of Tenofovir / Emtricitabine / Efavirenz versus Zidovudine / Lamivudine / Efavirenz as fist-line regimens for the treatment of HIV-infected patients in low-income settings

The Highly Active Antiretroviral Therapy (HAART) is the combination of at least three antiretroviral compounds. The combination purpose is to reduce the likelihood of drug resistance. However in the long-term the resistance to the first-line combination occurs and leads to treatment failure. Thus, a second-line and even a third-line regimen are recommended in the long run. [...] [P. 5] The two treatment alternatives under comparison: Tenofovir (300 mg) CO-formulated with Emtricitabine (200 mg) and Efavirenz (600 mg) currently known under the brand name Atripla (R) was introduced in July 2006 in the United States market. The excellent safety profile and ease of use make this combination a perfect first-line regimen in low-income settings. Therefore, this treatment option was recommended in WHO 2006 reviewed guidelines. Unfortunately, Tenofovir and Emtricitabine compounds are still costly and not yet widely available. For a matter of simplification this regimen is referred in this report as "the recent" therapy. Initially, we had in mind to consider the most frequently used first-line regimen in low-income countries (Stavudine / Larnivudme / Nevirapine) as a comparator for this economic evaluation. Unfortunately, according to the literature review results (see Annex 3); there was no data available comparing head to head the effectiveness of this regimen with the recent one. Instead, we selected a less frequently but commonly used first-line regimen in low-income countries as a comparator: Zidovudine, Lamivudine, Efavirenz. This combination has extensive experience in durability, safety and toxicity and seems to be an optimal choice for a first-line regimen according to the clinical trial group 384 team. Furthermore, Zidovudine, one of the compounds of this combination is now recommended as one of the preferred NNRTI [Non Nucleoside Reverse Transcriptase Inhibitors] options to be considered by countries instead of Stavudine (the most used NNRTI in limited-income countries). As this combination has been included in the WHO guidelines as a first-line therapy since 2003 when WHO launched the "3 by 5" scaling-up initiative, this combination of drugs is referred in this report as the "old" therapy. Objectives: The primary objective of this economic evaluation is to compare the two first-line HAARTs introduced above, in a low-income setting context. Both of these combinations are recommended by the 2006 WHO guidelines as potential first-line regimens. The secondary objective is to provide a simplified and comprehensible cost-effectiveness modeling tool in order to help policy makers, in resource-limited settings, make decisions about which first-line HAART to fund using the scarce resources available. [P. 6-7]

Sticky income inequality in the Spanish transition (1973-1990)

This paper investigates the evolution of income inequality in Spain during its transition to democracy, suggesting a method for the correction of under-reporting of earnings and profits in the Household Budget Surveys’ data. The contribution is twofold: the methodological proposal, based on income expenditure discrepancy and scaling-up to National Accounts, improves on previous work, and can be convenient for similar historical sources in other countries. Secondly, its application results in an alternative history of the distribution of income in this case, changing the levels and also the observed trend. Previous literature asserted a substantial equalization, related to the democratization process, while after the adjustment inequality in disposable income is shown to have been quite persistent.

Vertailuanalyysin käyttö termohydraulisten koelaitteistojen tulosten laitosmittakaavaan skaalautumisen tutkimisessa

Työn tavoitteena oli tarkastella termohydraulisten koelaitteistojen skaalauksessa käytettäviä periaatteita ja menettelyjä sekä vertailla Apros-simulaattoriohjelmalla laskettuja kanden koelaitteistomallin ja EPR-mallin tuloksia. Tarkoituksena oli saada käsitys siitä, miten hyvin tarkastellut koelaitteistot kuvaavat EPR-Iaitostyypin käyttäytymistä onnettomuustilanteessa. Malleilla tutkittiin jäähdytteen määrän vaikutusta primääripiirin käyttäytymiseen. Koelaitteistomallien tuloksissa toistuvat samat ilmiöt kuin EPR-mallin tuloksissa. Laskettuja PKL-koelaitteistomallin tuloksia vertailtiin myös koelaitteistolla suoritettuun kokeeseen. PKL-mallin todettiin toistavan hyvin kokeen tulokset. Koelaitteistojen tuloksien perusteella kelpoistetaan laskentaohjelmia, joita käytetään ydinvoimalaitosten turvallisuustutkimuksessa. Erityistä harkintaa tulee käyttää koelaitteistojen tulosten hyödyntämisessä, sillä mittakaava vaikuttaa ilmiöiden esiintymiseen.

Periodontal Diseases in Tanzania

Tutkimuksen tavoitteena oli kuvata hampaiden kiinnityskudossairauksien esiintyvyyttä ja suuhygieniatottumuksia Tansaniassa. Viiden eri tutkimuksen avulla kartoitettiin suuhygieniatottumuksia, kiinnityskudosten tilaa, kiinnityskudossairauksien riskitekijöitä ja hoidon tarvetta (CPITN) sekä ienvetäymiä. Tutkimukset toteutettiin eri paikkakunnilla vuosien 1987 ja 2003 välillä. Tutkittavat valittiin satunnaisesti tai harkitusti; tutkittavien määrä vaihteli 201:stä 1764:ään. Aineistot kerättiin kysymyslomakkeilla ja kliinisten tutkimusten avulla. Kliinisesti mitattiin plakin, hammaskiven ja ienten verenvuodon määrä, ientaskujen syvyys, ienvetäymien laajuus ja puuttuvien hampaiden lukumäärä. Tutkimusvälineinä käytettiin peiliä, Williamsin ja WHO:n ientaskumittareita. Muoviharjaksista hammasharjaa ilmoitti käyttävänsä 51,5-97,8% tutkituista. Ns. harjaustikun käyttö vaihteli paljon: 0,9-32,0 %. Plakkia löydettiin 65-100 %:lla tutkituista. Hammaskiveä oli suurimmalla osalla tutkituista. Myös ienverenvuotoa löytyi valtaosalta (79-100%). Ienverenvuotoa oli enemmän miehillä kuin naisilla sekä alhaisemman koulutustason omaavilla. Neljäkymmentä vuotta täyttäneiltä löydettiin 4–5 mm:n syvyisiä ientaskuja 82,1 %:lta ja ≥ 6 mm:n taskuja 43,8 %:lta. Suun terveystottumusten ohjaamiseen oli tarvetta yli 90 %:lla, hammaskiven poistoon ja juurten pinnan tasoitukseen yli 80%:lla. Yleisimmät riskitekijät kiinnityskudossairauksille olivat ikä (≥ 35 vuotta), miessukupuoli, alhainen koulutustaso, plakin, hammaskiven ja ientulehduksen määrä sekä asuminen maaseudulla. Ienvetäymiä (≥ 4 mm) löytyi noin 54%:lla tutkituista. Ienvetäymiä oli useammin miehillä kuin naisilla ja ne olivat yhteydessä ikään sekä hammaskiven ja ienverenvuodon esiintymiseen. Suuhygieniataso tutkituilla henkilöillä oli huono ja ienvetäymien esiintyvyys korkea. Syviä ientaskuja löytyi kuitenkin harvoilta tutkituilta. Riskitekijät kiinnityskudossairauksille olivat ikä, miessukupuoli, alhainen koulutustaso, plakin, hammaskiven ja ientulehduksen määrä sekä asuminen maaseudulla. Ienvetäymien riskit olivat ikä, miessukupuoli, hammaskivi ja ienverenvuoto

On Topological Solitons in The Faddeev-Skyrme Model and its Extensions

The topological solitons of two classical field theories, the Faddeev-Skyrme model and the Ginzburg-Landau model are studied numerically and analytically in this work. The aim is to gain information on the existence and properties of these topological solitons, their structure and behaviour under relaxation. First, the conditions and mechanisms leading to the possibility of topological solitons are explored from the field theoretical point of view. This leads one to consider continuous deformations of the solutions of the equations of motion. The results of algebraic topology necessary for the systematic treatment of such deformations are reviewed and methods of determining the homotopy classes of topological solitons are presented. The Faddeev-Skyrme and Ginzburg-Landau models are presented, some earlier results reviewed and the numerical methods used in this work are described. The topological solitons of the Faddeev-Skyrme model, Hopfions, are found to follow the same mechanisms of relaxation in three different domains with three different topological classifications. For two of the domains, the necessary but unusual topological classification is presented. Finite size topological solitons are not found in the Ginzburg-Landau model and a scaling argument is used to suggest that there are indeed none unless a certain modification to the model, due to R. S. Ward, is made. In that case, the Hopfions of the Faddeev-Skyrme model are seen to be present for some parameter values. A boundary in the parameter space separating the region where the Hopfions exist and the area where they do not exist is found and the behaviour of the Hopfion energy on this boundary is studied.

Effects of the epitaxial layer thickness on the noise properties of Schottky barrier diodes

An analytical theory to describe the combined effects of the epitaxial layer thickness and the ohmic contact on the noise properties of Schottky barrier diodes is presented. The theory, which provides information on both the local and the global noise properties, takes into account the finite size of the epitaxial layer and the effects of the back ohmic contact, and applies to the whole range of applied bias. It is shown that by scaling down the epitaxial layer thickness, the current regime in which the noise temperature displays a shot-noise-like behavior increases at the cost of reducing the current range in which the thermal-noise-like behavior dominates. This improvement in noise temperature is limited by the effects of the ohmic contact, which appear for large currents. The theory is formulated on general trends, allowing its application to the noise analysis of other semiconductor devices operating under strongly inhomogeneous distributions of the electric field and charge concentrations.

Effects of the epitaxial layer thickness on the noise properties of Schottky barrier diodes

An analytical theory to describe the combined effects of the epitaxial layer thickness and the ohmic contact on the noise properties of Schottky barrier diodes is presented. The theory, which provides information on both the local and the global noise properties, takes into account the finite size of the epitaxial layer and the effects of the back ohmic contact, and applies to the whole range of applied bias. It is shown that by scaling down the epitaxial layer thickness, the current regime in which the noise temperature displays a shot-noise-like behavior increases at the cost of reducing the current range in which the thermal-noise-like behavior dominates. This improvement in noise temperature is limited by the effects of the ohmic contact, which appear for large currents. The theory is formulated on general trends, allowing its application to the noise analysis of other semiconductor devices operating under strongly inhomogeneous distributions of the electric field and charge concentrations.

Searching for consensus in ahp-group decision making. A bayesian perspective

This paper sets out to identify the initial positions of the different decisionmakers who intervene in a group decision making process with a reducednumber of actors, and to establish possible consensus paths between theseactors. As a methodological support, it employs one of the most widely-knownmulticriteria decision techniques, namely, the Analytic Hierarchy Process(AHP). Assuming that the judgements elicited by the decision makers follow theso-called multiplicative model (Crawford and Williams, 1985; Altuzarra et al.,1997; Laininen and Hämäläinen, 2003) with log-normal errors and unknownvariance, a Bayesian approach is used in the estimation of the relative prioritiesof the alternatives being compared. These priorities, estimated by way of themedian of the posterior distribution and normalised in a distributive manner(priorities add up to one), are a clear example of compositional data that will beused in the search for consensus between the actors involved in the resolution ofthe problem through the use of Multidimensional Scaling tools

Group preference structures in AHP–group decision making

This paper presents a procedure that allows us to determine the preference structures(PS) associated to each of the different groups of actors that can be identified in a groupdecision making problem with a large number of individuals. To that end, it makesuse of the Analytic Hierarchy Process (AHP) (Saaty, 1980) as the technique to solvediscrete multicriteria decision making problems. This technique permits the resolutionof multicriteria, multienvironment and multiactor problems in which subjective aspectsand uncertainty have been incorporated into the model, constructing ratio scales correspondingto the priorities relative to the elements being compared, normalised in adistributive manner (wi = 1). On the basis of the individuals’ priorities we identifydifferent clusters for the decision makers and, for each of these, the associated preferencestructure using, to that end, tools analogous to those of Multidimensional Scaling.The resulting PS will be employed to extract knowledge for the subsequent negotiationprocesses and, should it be necessary, to determine the relative importance of thealternatives being compared using anyone of the existing procedures