Sistemas de incentivos salariais no setor industrial

O autor se propõe a apresentar os vários sistemas de incentivos existentes, analisando seus pontos positivos e suas deficiências. Enfocando mais detalhadamente o sistema adotado na Philips Brasileira. Incluindo uma pesquisa de campo frente aos operadores de fábrica com o objetivo de analisar a eficácia e penetração do sistema junto aos mesmos. A natureza do trabalho está diretamente ligada à atividade profissional do mesmo, o qual ocupa atualmente o cargo de Gerente do Departamento Técnico de Eficiência e Organização (TEO) na IBRAPE, unidade industrial da Organização Philips Brasileira.

Lean management and innovation in operational efficiency: the EGR project implemented by Pirelli Tyre Brazil in Santo André plant

O trabalho tem como objetivo avaliar e descrever analiticamente a implementação de práticas de manufatura enxuta pela Pirelli Pneus no seu complexo industrial da América Latina. Além de uma descrição estruturada e ampla dos princípios de produção de Toyota e fundamentos teóricos do Lean thinking, uma ênfase especial será dedicada ao projeto EGR (Especialistas em Gestão da Rotina), como uma ferramenta estratégica para ser usada pela empresa multinacional italiana no futuro próximo, de modo a alcançar um resultado mais eficaz e eficiente na gestão da rotina diária. Este projeto, que representa um componente significativo do Pirelli Manufacturing System (PMS) e, principalmente, voltado para supervisores e gestores de plantas, consiste principalmente em ajudar a empresa a desenvolver a capacidade empresarial para avaliar corretamente o gap potencial existente entre os resultados atuais e os esperados, para tanto entender os desvios, bem como as causas subjacentes, e melhorar continuamente o desempenho da empresa por meio da padronização de processos e redução de desperdicios. Esses objetivos podem ser perseguidos, atuando em dois meios essenciais: habilidades técnicas e comportamentais de liderança para apoiar cada equipe de projeto; uma maior eficácia na gestão de indicadores de desempenho nas diferentes unidades de fábrica, de acordo com KPIs estabelecidos no nível central pelo Head Quarter. Além disso, a investigação será focada na experiência peculiar da planta de Santo André, onde o EGR começou como piloto, com o objetivo de captar as alterações relevantes (no lado organizacional e econômico) que este projeto trouxe para a empresa, através da realização de pesquisa de campo e entrevistas, que são orientados a recolher provas, considerações e opiniões de todos os principais atores envolvidos.

Implantação da troca rápida de ferramentas em uma indústria siderúrgica

Este trabalho de conclusão apresenta a implantação de um sistema de Troca Rápida de Ferramentas (TRF), através de uma metodologia elaborada a partir de uma revisão na literatura disponível. A comprovação do método se dá através de um estudo de caso aplicado à indústria siderúrgica, mais especificamente um laminador de aços longos. A implantação plena de uma sistemática TRF permite uma redução significativa nos tempos de preparação e ajuste. A partir disso, a disponibilização de tempo para a produção pode gerar um melhor aproveitamento da capacidade produtiva, ou mesmo viabilizar a produção econômica em pequenos lotes, flexibilizando a fábrica, de acordo com a estratégia de produção desejada. O trabalho apresenta uma revisão bibliográfica sobre metodologias de implantação de sistemas TRF sob a ótica de diferentes autores e, a partir disso, consolida um método a ser implantado. O método faz uso de uma série de técnicas e ferramentas de melhoria, enfatizando o envolvimento e comprometimento das equipes operativas e de liderança. A descrição do estudo de caso apresenta de forma detalhada as etapas de implantação e os resultados obtidos a partir da efetivação de ações com foco na redução dos tempos de preparação. A seção final traz conclusões obtidas durante a realização da implantação e apresenta sugestões para trabalhos futuros.

Fluxo físico do cimento: um estudo de caso

Descreve em detalhes o sistema de Distribuição física de uma cimenteira, referente ao Fluxo da Fábrica aos Terminais de Vendas e clientes. Aborda os principais problemas encontrados no sistema atual utilizado, propõe novo sistema demonstrando os resultados esperados. A preocupação é demonstrar, as relações entre o Modelo Teórico de Distribuição, extraído da literatura, e o prático atual e proposto. Analisa a importância da conceituação clara das atividades e funções de cada elemento do sistema e os resultados que isto traduz, em termos de aumento do Esforço Mercadológico, através da melhoria da eficácia do Sistema, tecendo considerações sobre a importância da Distribuição Física na comercialização do cimento.

Sociedades e estratégias empresariais nos sectores agro-industriais do vinho e cana sacarina na Madeira (1870-1930)

Universidade da Madeira

Construção com painéis sanduíche de silicato de cálcio, cimento e EPS

A carência de materiais que permitam elementos estruturais leves, de elevada rigidez e resistência na indústria da construção, contribuiu para o desenvolvimento e posterior utilização de materiais compósitos, nos quais incluem-se os painéis sanduíche. Estes são aperfeiçoados e fabricados com o objetivo de obter elevada relação resistência/peso próprio, rigidez/peso próprio e outras vantagens a nível construtivo como a montagem rápida, a redução de custos e boas propriedades de isolamento. Nesta dissertação são apresentados os painéis sanduíche de silicato de cálcio, cimento e EPS, com o intuito de informar os interessados, em métodos construtivos alternativos, sobre uma solução viável, vantajosa a vários níveis e que pode ser adaptada e igualmente adequada às suas necessidades construtivas. Inicia-se com um resumo do desenvolvimento histórico até à necessidade de evolução e utilização de materiais semelhantes, seguindo-se de uma descrição mais detalhada do painel sanduíche e os seus requisitos. A nível de fabrico, sugere-se uma possível disposição de maquinaria em fábrica e pormenoriza-se o processo de fabrico até atingir o produto final. Segue-se o trajeto do painel até ao seu propósito final em obra, onde se descreve o seu processo construtivo. Explicam-se as vantagens e desvantagens dos Painéis acompanhados de vários exemplos de aplicações com sucesso. Para divulgar a qualidade e facilitar a comercialização deste produto, descreve-se detalhadamente o processo moroso da obtenção da marca que atesta a conformidade de um produto a nível europeu e mundial, a marcação CE, e a nível nacional, uma proposta de especificação técnica como comprovativo de qualidade. É ainda realizado um estudo teórico do desempenho esperado dos painéis sanduíche de silicato de cálcio, cimento e EPS, a nível acústico, térmico, a sua resistência à água e fogo, durabilidade a longo prazo e resistência dos Painéis. Por fim, demonstram-se vários pormenores construtivos que eventualmente serão utilizados em obra.

Modelo institucional do processo de estruturação de empresas de desenvolvimento de software: um estudo de múltiplos casos

Some authors have shown the need of understanding the technological structuring process in contemporary firms. From this perspective, the software industry is a very important element because it provides products and services directly to many organizations from many fields. In this case, the Brazilian software industry has some peculiarities that distinguish it from other industries located in developed countries, which makes its understanding even more relevant. There is evidence that local firms take different strategies and structural configurations to enter into a market naturally dominated by large multinational firms. Therefore, this study aims to understand not only the structural configurations assumed by domestic firms but also the dynamic and the process that lead to these different configurations. To do so, this PhD dissertation investigates the institutional environment, its entities and the isomorphic movements, by employing an exploratory, descriptive and explanatory multiple cases study. Eight software development companies from the Recife's information technology Cluster were visited. Also, a form was applied and an interview with one of the main firm s professional was conducted. Although the study is predominantly qualitative, part of the data was analyzed through charts and graphs, providing a companies and environment overview that was very useful to analysis done through the interviews interpretation. As a result, it was realized that companies are structured around hybrids business models from two ideal types of software development companies, which are: software factory and technology-based company. Regarding the development process, it was found that there is a balanced distribution between the traditional and agile development paradigm. Among the traditional methodologies, the Rational Unified Process (RUP) is predominant. The Scrum is the most used methodology among the organizations based on the Agile Manifesto's principles. Regarding the structuring process, each institutional entity acts in such way that generates different isomorphic pressure. Emphasis was given to entities such as customers, research agencies, clusters, market-leading businesses, public universities, incubators, software industry organizations, technology vendors, development tool suppliers and manager s school and background because they relate themselves in a close way with the software firms. About this relationship, a dual and bilateral influence was found. Finally, the structuring level of the organizational field has been also identified as low, which gives a chance to organizational actors of acting independently

Avaliação da conformidade de blocos cerâmicos para alvenaria de vedação produzidas na Região Integrada de Desenvolvimento da Grande Teresina

This research presents an outlook of the industries of red ceramic in the region next to the city of Teresina and an analysis of the ceramic products producted in this pole. The microregion investigated possesses 13 boroughs where were identified 32 ceramic in operation, being that 24 are located in Teresina, the ceramic region more important of Piauí, 1 is located in the city of Miguel Leão and 7 is located in Timon city that belongs to the state of Maranhão. The majority of ceramics are pulverized in these two cities, Teresina and Timon , responsible by a largely production independent of distance between fabric and consumer market. Furthermore, there is an artisanal production realized in other boroughs, mainly manual conformation bricks, where are producted diverse types of handicraft and ceramics utilitarian. The objective of this research is to evalue the conformity of ceramic blocks for brick of obstruction made by red ceramic industry of microregion at studying, verifying their pontentialities and adequacy in terms of production. In this research universe made a search of ceramic industries related to the Foundation CEPRO (Foundation Center of Research Social and Economic of Piauí). For the analysis of the ceramic products , were colected 60 crude bricks sample in three industries for their characterization, and 39 burned bricks sample for the Evaluation of Conformity. The results of the characterization made reached a accetptable standard in all formulations and temperature studied. The burned samples were applied to the geometric, physical and mechanical assays according to the ABNT standards (Brazilian Association of Technical Standards). The results of the physical assays showed that all the samples are at the same band recommended by standard. However, through the geometric assays just two industries did not present results according to the standard, due to lack of control in their process such as in their equipments. Taking into account the mechanical properties, only one industry investigated was not according to the standard

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Alternativas de ultimação de resíduo plástico termofixo

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Desenvolvimento (in) sustentável das indústrias cerâmicas da microrregião do Vale-do-Açu/RN

A great discussion of this work refers to development that is related to the common census of economic growth, in addition, another component of this discussion is related to socio-cultural and environmental impacts of this conception of progress. Giving economic progress is not necessary, since the development in its fullness, that progress depends, but what is sought is a harmony between capital accumulation and environmental limits and social interactions between men and between them and nature. The presence or absence of this harmonious relationship can be observed in various industrial activities, more punctual can cite the example of the developed ceramic activity in the meso-Valley-Acu in Rio Grande do Norte where such activity has great economic representativeness for the region, but that does not have good relations with social and environmental issues and is more focused on the accumulation of capital by increasing its level of industrial activity. Given this debate, the present paper aims to present the profile of a ceramic tile Valley-of-Acu and impacts, ecosocioambientais generated as a result of this activity as well. Methodologically the research will be conducted through literature research papers in books and other work carried out on the same theme, the second time will be held the empirical part of the research through interviews with managers of industries (selected through sample with the criteria set later ) as well as with employees working on the factory floor and city managers in the region under analysis and other agencies responsible for regulation and control of activity potter in the state

Um tempo para Pandora brincar: etnografia acerca do tempo de lazer das operárias

The aim of this paper was to understand women s time as seen through the experiences of the women workers of Sobral-CE, who build free time and leisure time through the subjectivity of their histories as delineated by an everyday life as full of work as it is empty of leisure. The approach used here is an ethnographic one, through participative observation and narratives of working and leisure experiences. These workers everyday life reveals itself in the construction of their leisure time as related to their time of drudgery, in public as well as in private spaces. The responsibility of working away from home, as well as of carrying through domestic chores and of devoting themselves to their husband and their children was imposed upon women in a manipulative manner. This fact deprived women of their possibility of practicing and enjoying leisure activities. With the coming of the so called triple working day, women began organizing new strategies to elaborate, to organize, to create and to turn leisure activities possible. The interpretation of the trajectories of the lives of twenty women workers of a shoe plant in Sobral-CE was realized by the means of an ethnographic study. The thesis consists of the analysis of the construction of social times and of leisure practices, in a context interpenetrated by the cultural conditionings of much work and economic difficulties. The aim of the study was to understand how the women workers of Sobral-CE construct their practices and representations about free time and leisure in the web of sociabilities (possibilities, necessities, dilemmas and dreams). Everyday life is here defined as an ontological dimension of human life. Hence, it does not limit itself to the rituals, the celebrations or the exceptional conditions usually discussed by researchers

Palmyra Wanderley e a educação da mulher no cenário Norte-rio-grandense (1914 -1920)

The present work has the intention to analyze the contribution of the writer and journalist Palmyra Guimarães Wanderley to the education, throughout her writings in the period between 1914 to 1920. I search through her journalist writings produced in the feminine magazine Via Láctea (1914-1915) her idealization, and as in the newspaper A República e Diário de Natal, in the decade of 1920 establishing relationships with education, mostly because of her production in the pages of the paper articles regarding feminine education and women condition. At the same time I sketch the biographic profile of Palmyra Wanderley relating her to the historical moment that she lived. To achieve the proposed goals I begin with a documental research within the available archives and use other sources like pictures and interviews with her relatives. The results of the research show that the worry of Palmira Wanderley with the education in our state, goes beyond her published writings in magazines and newspapers. She has been ahead of Escola de Comércio Feminino and Aliança Feminina, she has also done a conference in the House of the Young Single Ladies' Protection (Casa de Proteção às Moças Solteiras), institution of the Aliança s responsibility that offered shelter, food, formal and religious education to the workers of the Fabric Factory of Natal (Fábrica Tecidos de Natal). Her involvement evidences her contribution to the historiography of the education in Rio Grande do Norte, specially the history of women education ensuring her presence in the day by day history

Uma arquitetura de software baseada em componentes visualização de informações industriais

Due to the current need of the industry to integrate data of the beginning of production originating from of several sources and of transforming them in useful information for sockets of decisions, a search exists every time larger for systems of visualization of information that come to collaborate with that functionality. On the other hand, a common practice nowadays, due to the high competitiveness of the market, it is the development of industrial systems that possess characteristics of modularity, distribution, flexibility, scalability, adaptation, interoperability, reusability and access through web. Those characteristics provide an extra agility and a larger easiness in adapting to the frequent changes of demand of the market. Based on the arguments exposed above, this work consists of specifying a component-based architecture, with the respective development of a system based on that architecture, for the visualization of industrial data. The system was conceived to be capable to supply on-line information and, optionally, historical information of variables originating from of the beginning of production. In this work it is shown that the component-based architecture developed possesses the necessary requirements for the obtaining of a system robust, reliable and of easy maintenance, being, like this, in agreement with the industrial needs. The use of that architecture allows although components can be added, removed or updated in time of execution, through a manager of components through web, still activating more the adaptation process and updating of the system