Extended surface fluidized bed heat transfer

Experirnental data and theoretical calculation on the heat transfer performance of extended surface submerged: in shallow air fluidized beds ~ less than 150 mm, are presented. Energy t;ransferrence from the bed material was effected by water cooled tubes passing through the fins. The extended surface tested was either manufactured from square or radial copper fins silver soldered to a circular basic tube or commercially supplied, being of the crimped or extruded helical fin type. Performances are compared, for a wide range of geometric variables, bed configurations and fluidized materials, with plain and oval tubes operating under similar experimental conditions. A statistical analysis of all results, using a regression technique, has shown the relative importance of each significant variable. The bed to surface heat transfer coefficients are higher than those reported in earlier published work using finned tubes in much deeper beds and the heat transfer to the whole of the extended surface is at least as good as that previously reported for un-finned tubes. The improved performance is attributed partly to the absence of large bubbles in shallow beds and it is suggested that the improved circulation of the solids when constrained in the narrow passages between adjacent fins may be a contributory factor. Flow visualisation studies between a perspex extended surface and a fluidized bed using air at ambient temperatures, have demonstrated the effect of too small a fin spacing. Fin material and the bonding to the basic tube are more important in the optimisation of performance than in conventional convective applications because of the very much larger heat fluxes involved. A theoretical model of heat flow for a radial fin surface, provides data concerning the maximum heat transfer and minimum metal required to fulfil a given heat exchange duty. Results plotted in a series of charts aim at assisting the designer of shalJow fluidized beds.

An evaluation of Home Office extended interviews for police personnel

In this thesis the validity of an Assessment Centre (called 'Extended Interview') operated on behalf of the British police is investigated. This Assessment Centre (AC) is used to select from amongst internal candidates (serving policemen and policewomen) and external candidates (graduates) for places on an accelerated promotion scheme. The literature is reviewed with respect to history, content, structure, reliability, validity, efficiency and usefulness of ACs, and to contextual issues surrounding AC use. The history of, background to and content of police Extended Interviews (Els) is described, and research issues are identified. Internal validation involved regression of overall EI grades on measures from component tests, exercises, interviews and peer nominations. Four samples numbering 126, 73, 86 and 109 were used in this part of the research. External validation involved regression of three types of criteria - training grades, rank attained, and supervisory ratings - on all EI measures. Follow-up periods for job criteria ranged from 7 to 19 years. Three samples, numbering 223, 157 and 86, were used in this part of the research. In subsidiary investigations, supervisory ratings were factor analysed and criteria intercorrelated. For two of the samples involved in the external validition, clinical/judgemental prediction was compared with mechanical (unit-weighted composite) prediction. Main conclusions are that: (1) EI selection decisions were valid, but only for a job performance criterion; relatively low validity overall was interpreted principally in terms of the questionable job relatedness of the EI procedure; (2) Els as a whole had more validity than was reflected in final EI decisions; (3) assessors' use of information was not optimum, tending to over-emphasize subjectively derived information particularly from interviews; and (4) mechanical prediction was superior to clinical/judgemental prediction for five major criteria.

Extended range interferometry using a coherence tuned synthesised dual wavelength technique with multimode fibres

We describe in the letter a technique for making extended-range interferometric measurements with a coherence multiplexed system by means of a variation on the dual-wavelength technique. The interferometer is illuminated with a single source and the two wavelengths are synthesised at the output by means of an interference filter.

Extended-range fiber polarimetric strain sensor

We describe a frequency-modulation technique that is applicable to two-beam interferometric systems illuminated by semiconductor diode lasers. The technique permits a determination of the optical path difference between the two arms of the interferometer and is used here to extend the range of a fiber polarimetric strain sensor by determining the order of the particular polarimetric fringe under consideration.

Some clinical aspects of the eye in extended contact lens wear

The limbal vascular response to extended contact lens wear was examined in a group comparative study initially intended to last eighteen months. After six months all patients wearing contact lenses had presented with micro-epithelial cysts. This unanticipated occurrence of the micro-epithelial-cysts necessitated termination of the study, and limited the quantity of data collected. However, sufficient results were available to allow a limited description of •the vascular response to this form of contact lens wear. Interpretations of the date collected ore discussed in relation to suggested vasostimulating factors in the cornea. The micro-epithelial cysts observed after extended wear were classified and their rate of recovery recorded. A further clinical study was undertaken to observe cysts in both contact lens - and non contact lens-wearing eyes. Cysts were observed in every category of patient, although the characteristic patterns varied. These observations of micro-epithelial cysts are discussed with respect to the aetiopathogeneses of corneal epithelial cystic disorders. Subsequently, attempts were made to induce cysts in rabbit corneae by extended contact lens wear. Clinical observations revealed cyst-like appearances. Histological sections did not contain cysts but did exhibit signs characteristic •of cystic disorders of the corneal epithelium. In general, the results from the study indicate that extended wear is subjectively acceptable to contact lens wearers. However, the objective findings of significant vascular changes, micro-epithelial cysts and cases of acute red eye response cast considerable doubt on the recommendation of extended wear contact lenses for purely cosmetic applications.

Extended-range, low coherence dual wavelength interferometry using a superfluorescent fibre source and chirped fibre Bragg gratings

We describe an all-fibre, passive scheme for making extended range interferometric measurements based on the dual wavelength technique. The coherence tuned interferometer network is illuminated with a single superfluorescent fibre source at 1.55 μm and the two wavelengths are synthesised at the output by means of chirped fibre Bragg gratings. We demonstrate an unambiguous sensing range of 270 μm, with a dynamic range of 2.7 × 105.

Extended range interrogation of wavelength division multiplexed fibre Bragg grating sensors using arrayed waveguide grating

A technique for interrogating multiplexed fibre Bragg grating (FBG) sensors using an arrayed waveguide grating (AWG) is described. The approach considerably extends the sensing range from that achieved previously, while providing a strain resolution of 17nε/√Hz at 30 Hz.

Predicting binge-drinking behaviour using an extended TPB:examining the impact of anticipated regret and descriptive norms

Aims: To investigate the utility of an extended Theory of Planned Behaviour (TPB), including descriptive norms and anticipated regret, in predicting binge-drinking intentions and behaviour. Methods: A total of178 undergraduates completed a questionnaire containing measures of TPB variables, descriptive norms, anticipated regret, and previous binge-drinking behaviour. One week later, 104 students completed a measure of binge-drinking behaviour. Results: Hierarchical regression demonstrated that attitudes (beta = 0.30, P < 0.001) and anticipated regret (beta = 0.47, P < 0.001) were significant predictors of intentions, with the final equation accounting for 58% of the variance. Hierarchial regression found that intentions (beta = -0.21, P < 0.05) and previous binge-drinking behaviour (beta = 0.36, P < 0.01) predicted current drinking behaviour, accounting for 33% of the variance. Conclusions: The study suggests that modifying attitudes and inducing regret may be effective strategies for reducing binge-drinking intentions among undergraduates, which should reduce subsequent binge-drinking behaviour. © The Author 2006. Published by Oxford University Press on behalf of the Medical Council on Alcohol. All rights reserved.