Guava pomace: a new source of anti-inflammatory and analgesic bioactives

Abstract Background Guava pomace is an example of the processing waste generated after the manufacturing process from the juice industry that could be a source of bioactives. Thus, the present investigation was carried out in order to evaluate the anti-inflammatory and antinociceptive potential and determinate the main phenolic compounds of a guava pomace extract (GPE). Methods The anti-inflammatory activity was evaluated by carrageenan, dextran, serotonin, histamine-induced paw edema and neutrophils migration in the peritoneal cavity models. Acetic acid-induced abdominal writhing and formalin test were performed to investigate the antinociceptive effects. In addition, the content of total phenolic and of individual phenolic compounds was determined by GC/MS. Results GPE showed anti-inflammatory activity by carrageenan, dextran, serotonin, histamine-induced paw edema and neutrophils migration in the peritoneal cavity models (p < 0.05). GPE also demonstrated antinociceptive activity by acetic acid-induced abdominal writhing and formalin test (p < 0.05). The total phenolic value was 3.40 ± 0.09 mg GAE/g and epicatechin, quercetin, myricetin, isovanilic and gallic acids were identified by GC/MS analysis. Conclusions The presence of bioactive phenolic compounds as well as important effects demonstrated in animal models suggest that guava pomace could be an interesting source of anti-inflammatory and analgesic substances.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Effetti del chitosano su composti polifenolici in colture cellulari di vite: aspetti molecolari e metabolici

Polyphenols, including flavonoids and stilbenes, are an essential part of human diet and constitute one of the most abundant and ubiquitous group of plant secondary metabolites. The level of these compounds is inducible by stress or fungal attack, so attempts are being made to identify likely biotic and abiotic elicitors and to better understand the underlying mechanism. Resveratrol (3,5,4’-trihydroxystilbene), which belongs to the stilbene family, is a naturally occurring polyphenol, found in several fruits, vegetables and beverages including red wine. It is one of the most important plant polyphenols with proved benefic activity on animal health. In the last two decades, the potential protective effects of resveratrol against cardiovascular and neurodegenerative diseases, as well as the chemopreventive properties against cancer, have been largely investigated. The most important source of polyphenols and in particular resveratrol for human diet is grape (Vitis vinifera). Since stilbenes and flavonoids play a very important role in plant defence responses and enviromental interactions, and their effects on human health seem promising, the aim of the research of this Thesis was to study at different levels the activation and the regulation of their biosynthetic pathways after chitosan treatment. Moreover, the polyphenol production in grape cells and the optimisation of cultural conditions bioreactor scale-up, were also investigated. Cell suspensions were obtained from cv. Barbera (Vitis vinifera L.) petioles and were treated with a biotic elicitor, chitosan (50 μg/mL, dissolved in acetic acid) to promote phenylpropanoid metabolism. Chitosan is a D-glucosamine polymer from fungi cell wall and therefore mimes fungal pathogen attack. Liquid cultures have been monitored for 15 days, measuring cell number, cell viability, pH and grams of fresh weight. The endogenous and released amounts of 7 stilbenes (trans and cis isomers of resveratrol, piceid and resveratroloside, and piceatannol), gallic acid, 6 hydroxycinnamic acids (trans-cinnamic, p-coumaric, caffeic, ferulic, sinapic and chlorogenic acids), 5 catechines (catechin, epicatechin, epigallocatechin-gallate (EGCG), epigallocatechin and epicatechin-gallate) and other 5 flavonoids (chalcon, naringenin, kaempferol, quercetin and rutin) in cells and cultural medium, were measured by HPLC-DAD analysis and total anthocyanins were quantified by spectrophotometric analysis. Chitosan was effective in stimulating trans-resveratrol endogenous accumulation with a sharp peak at day 4 (exceeding acetic acid and water controls by 36% and 63%, respectively), while it did not influence the production of the cis-isomer. Compared to both water and acetic acid controls, chitosan decreased the release of both trans- and cis-resveratrol respect to controls. No effect was shown on the accumulation of single resveratrol mono-glucoside isomers, but considering their total amount, normalized for the relative water control, it was possible to evidence an increase in both accumulation and release of those compounds, in chitosan-treated cells, throughout the culture period and particularly during the second week. Many of the analysed flavonoids and hydroxycinnamic acids were not present or detectable in trace amounts. Catechin, epicatechin and epigallocatechin-gallate (EGCG) were detectable both inside the cells and in the culture media, but chitosan did not affect their amounts. On the contrary, total anthocyanins have been stimulated by chitosan and their level, from day 4 to 14, was about 2-fold higher than in both controls, confirming macroscopic observations that treated suspensions showed an intense brown-red color, from day 3 onwards. These elicitation results suggest that chitosan selectively up-regulates specific biosynthetic pathways, without modifying the general accumulation pattern of other flavonoids. Proteins have been extracted from cells at day 4 of culture (corresponding to the production peak of trans-resveratrol) and separated by bidimensional electrophoresis. The 73 proteins that showed a consistently changed amount between untreated, chitosan and acetic acid (chitosan solvent) treated cells, have been identified by mass spectrometry. Chitosan induced an increase in stilbene synthase (STS, the resveratrol biosynthetic enzyme), chalcone-flavanone isomerase (CHI, that switches the pathway from chalcones to flavones and anthocyanins), pathogenesis-related proteins 10 (PRs10, a large family of defence proteins), and a decrease in many proteins belonging to primary metabolisms. A train of six distinct spots of STS encoded by the same gene and increased by chitosan, was detected on the 2-D gels, and related to the different phosphorylation degree of STS spots. Northern blot analyses have been performed on RNA extracted from cells treated with chitosan and relative controls, using probes for STS, PAL (phenylalanine ammonia lyase, the first enzyme of the biosynthetic pathway), CHS (chalcone synthase, that shares with STS the same precursors), CHI and PR-10. The up-regulation of PAL, CHS and CHI transcript expression levels correlated with the accumulation of anthocyanins. The strong increase of different molecular weight PR-10 mRNAs, correlated with the 11 PR-10 protein spots identified in proteomic analyses. The sudden decrease in trans-resveratrol endogenous accumulation after day 4 of culture, could be simply explained by the diminished resveratrol biosynthetic activity due to the lower amount of biosynthetic enzymes. This might be indirectly demonstrated by northern blot expression analyses, that showed lower levels of phenylalanine ammonia lyase (PAL) and stilbene synthase (STS) mRNAs starting from day 4. Other possible explanations could be a resveratrol oxidation process and/or the formation of other different mono-, di-glucosides and resveratrol oligomers such as viniferins. Immunolocalisation experiments performed on grape protoplasts and the subsequent analyses by confocal microscope, showed that STS, and therefore the resveratrol synthetic site, is mostly associated to intracellular membranes close to the cytosolic side of plasma membrane and in a smaller amount is localized in the cytosol. STS seemed not to be present inside vacuole and nucleus. There were no differences in the STS intracellular localisation between the different treatments. Since it was shown that stilbenes are largely released in the culture medium and that STS is a soluble protein, a possible interaction of STS with a plasma membrane transporter responsible for the extrusion of stilbenes in the culture medium, might be hypothesized. Proteomic analyses performed on subcellular fractions identified in the microsomial fraction 5 proteins taking part in channel complexes or associated with channels, that significantly changed their amount after chitosan treatment. In soluble and membrane fractions respectively 3 and 4 STS and 6 and 3 PR-10 have been identified. Proteomic results obtained from subcellular fractions substantially confirmed previous result obtained from total cell protein extracts and added more information about protein localisation and co-localisation. The interesting results obtained on Barbera cell cultures with the aim to increase polyphenol (especially stilbenes) production, have encouraged scale up tests in 1 litre bioreactors. The first trial fermentation was performed in parallel with a normal time-course in 20 mL flasks, showing that the scale-up (bigger volume and different conditions) process influenced in a very relevant way stilbenes production. In order to optimise culture parameters such as medium sucrose amount, fermentation length and inoculum cell concentration, few other fermentations were performed. Chitosan treatments were also performed. The modification of each parameter brought relevant variations in stilbenes and catechins levels, so that the production of a certain compound (or class of compounds) could be hypothetically promoted by modulating one or more culture parameters. For example the catechin yield could be improved by increasing sucrose content and the time of fermentation. The best results in stilbene yield were obtained in a 800 mL fermentation inoculated with 10.8 grams of cells and supplemented with chitosan. The culture was fed with MS medium added with 30 g/L sucrose, 25 μg/mL rifampicin and 50 μg/mL of chitosan, and was maintained at 24°C, stirred by marine impeller at 100 rpm and supplied of air at 0.16 L/min rate. Resveratroloside was the stilbene present in the larger amount, 3-5 times more than resveratrol. Because resveratrol glucosides are similarly active and more stable than free resveratrol, their production using a bioreactor could be a great advantage in an hypothetical industrial process. In my bioreactor tests, stilbenes were mainly released in the culture medium (60-80% of the total) and this fact could be another advantage for industrial applications, because it allows recovering the products directly from the culture medium without stopping the fermentation and/or killing the cells. In my best cultural conditions, it was possible to obtain 3.95 mg/L of stilbenes at day 4 (maximum resveratrol accumulation) and 5.13 mg/L at day 14 (maximum resveratroloside production). In conclusion, chitosan effect in inducing Vitis vinifera defense mechanisms can be related to its ability to increase the intracellular content of a large spectrum of antioxidants, and in particular of resveratrol, its derivates and anthocyanins. Its effect can be observed at transcriptional, proteomic (variation of soluble and membrane protein amounts) and metabolic (polyphenols production) level. The chitosan ability to elicit specific plant matabolisms can be useful to produce large quantities of antioxidant compounds from cell culture in bioreactor.

Zuckertransport und Regulation des Hexosestoffwechsels bei Oenococcus oeni

Das Milchsäurebakterium Oenococcus oeni, welches für den biologischen Säureabbau im Wein eingesetzt wird, verstoffwechselt Hexosen über den Phosphoketolaseweg. Dabei können beträchtliche Mengen Acetat entstehen. Die Ursachen dafür wurden untersucht, insbesondere der Fructosestoffwechsel. Außerdem wurde der Hexosetransport untersucht, über den bei O. oeni noch nichts bekannt war. Die Aufnahme von Hexosen in die Zelle erfolgt mit hoher Affinität (KM=10 µM) über einen Symport mit H+, aber mit sehr niedriger spezifischer Aktivität (Vmax=9 U / g TG). Zusätzlich werden Hexosen mit ausreichender Aktivität über (vermutlich erleichterte) Diffusion in die Zelle transportiert, allerdings nur bei hohen Hexosekonzentrationen. Es wurden Gene gefunden, die für ein Hexose- Phosphotransferasesystem kodieren, welches in O. oeni keine bedeutende Rolle beim Transport spielt, aber vermutlich eine regulative Funktion hat. Zur Bildung von Essigsäure tragen verschiedene Faktoren bei: Der Ethanolweg, der in der heterofermentativen Milchsäuregärung die Reoxidation von NAD(P)H bewerkstelligt, ist durch die niedrige spezifische Aktivität der Acetaldehyddehydrogenase limitiert. Diese Limitierung wird noch verstärkt, wenn die zellulären Gehalte von Coenzym A aufgrund von Pantothensäuremangel niedrig sind. O. oeni umgeht durch Bildung von Erythrit die Limitierung, und Acetylphosphat wird nicht zu Ethanol reduziert, sondern als Acetat ausgeschieden. Bei Cofermentation von Hexosen mit externen Elektronenakzeptoren, wie Fructose, Pyruvat oder Sauerstoff, werden letztere zur Reoxidation von NAD(P)H genutzt, und als Folge wird Acetat ausgeschieden. Der Fluss von Fructose in den Phosphoketolaseweg wird durch das Enzym Phosphoglucoseisomerase verhindert, wenn dieses durch 6-Phosphogluconat gehemmt wird. Als Konsequenz wird Fructose im Mannitweg reduziert, was die Bildung von Essigsäure im Phosphoketolaseweg fördert. Bei niedrigen Wachstums- und Stoffwechselraten, z.B. bei C-Limitierung, ist der Ethanolweg nicht limitierend für den Stoffwechsel, und Hexosen werden über heterofermentative Milchsäuregärung umgesetzt, ohne daß Acetat entsteht. Pyruvat kann gleichzeitig als Elektronenakzeptor und als Energiequelle dienen: O. oeni ist in der Lage, Pyruvat mittels Disproportionierung zu Lactat und Acetat+CO2 zu fermentieren, und dabei Energie zu konservieren (0,5 ATP / Pyruvat).

Emissions of volatile organic compounds from tropical savanna vegetation and biomass burning

This dissertation focuses on characterizing the emissions of volatile organic compounds (VOCs) from grasses and young trees, and the burning of biomass mainly from Africa and Indonesia. The measurements were performed with a proton-transfer-reaction mass spectrometer (PTR-MS). The biogenic emissions of tropical savanna vegetation were studied in Calabozo (Venezuela). Two field campaigns were carried out, the first during the wet season (1999) and the second during the dry season (2000). Three grass species were studied: T. plumosus, H. rufa and A. canescens, and the tree species B. crassifolia, C. americana and C. vitifolium. The emission rates were determined with a dynamic plant enclosure system. In general, the emissions increased exponentially with increasing temperature and solar radiation. Therefore, the emission rates showed high variability. Consequently, the data were normalized to a standard temperature of 30°C, and standard emission rates thus determined allowed for interspecific and seasonal comparisons. The range of average daytime (10:00-16:00) emission rates of total VOCs measured from green (mature and young) grasses was between 510-960 ngC/g/h. Methanol was the primary emission (140-360 ngC/g/h), followed by acetaldehyde, butene and butanol and acetone with emission rates between 70-200 ngC/g/h. The emissions of propene and methyl ethyl ketone (MEK) were <80 ngC/g/h, and those of isoprene and C5-alcohols were between 10-130 ngC/g/h. The oxygenated species represented 70-75% of the total. The emission of VOCs was found to vary by up to a factor of three between plants of the same species, and by up to a factor of two between the different species. The annual source of methanol from savanna grasses worldwide estimated in this work was 3 to 4.4 TgC, which could represent up to 12% of the current estimated global emission from terrestrial vegetation. Two of the studied tree species, were isoprene emitters, and isoprene was also their primary emission (which accounted for 70-94% of the total carbon emitted) followed by methanol and butene + butanol. The daytime average emission rate of isoprene measured in the wet season was 27 mgC/g/h for B. crassifolia, and 123 mgC/g/h for C. vitifolium. The daytime emissions of methanol and butene + butanol were between 0.3 and 2 mgC/g/h. The total sum of VOCs emission measured during the day in the wet season was between 30 and 130 mgC/g/h. In the dry season, in contrast, the methanol emissions from C. vitifolium saplings –whose leaves were still developing– were an order of magnitude higher than in the wet season (15 mgC/g/h). The isoprene emission from B. crassifolia in the dry season was comparable to the emission in the wet season, whereas isoprene emission from C. vitifolium was about a factor of three lower (~43 mgC/g/h). Biogenic emission inventories show that isoprenoids are the most prominent and best-studied compounds. The standard emission rates of isoprene and monoterpenes of the measured savanna trees were in the lower end of the range found in the literature. The emission of other biogenic VOCs has been sparsely investigated, but in general, the standard emissions from trees studied here were within the range observed in previous investigations. The biomass burning study comprised the measurement of VOCs and other trace-gas emissions of 44 fires from 15 different fuel types, primarily from Africa and Indonesia, in a combustion laboratory. The average sum of emissions (excluding CO2, CO and NO) from African fuels was ~18 g(VOC)/kg. Six of the ten most important emissions were oxygenated VOCs. Acetic acid was the major emission, followed by methanol and formaldehyde. The emission of methane was of the same order as the methanol emission (~5 g/kg), and that of nitrogen-containing compounds was ~1 g/kg. An estimate of the VOC source from biomass burning of savannas and grasslands worldwide suggests that the sum of emissions is about 56 Tg/yr, of which 34 Tg correspond to oxygenated VOCs, 14 Tg to unsaturated and aromatic compounds, 5 Tg to methane and 3 Tg to N-compounds. The estimated emissions of CO, CO2 and NO are 216, 5117 and 9.4 Tg/yr, respectively. The emission factors reported here for Indonesian fuels are the first results of laboratory fires using Indonesian fuels. Acetic acid was the highest organic emission, followed by acetol, a compound not previously reported in smoke, methane, mass 97 (tentatively identified as furfural, dimethylfuran and ethylfuran), and methanol. The sum of total emissions of Indonesian fuels was 91 g/kg, which is 5 times higher than the emissions from African fuels. The results of this study reinforces the importance of oxygenated compounds. Due to the vast area covered by tropical savannas worldwide, the biogenic and biomass burning emission of methanol and other oxygenated compounds may be important for the regional and even global tropospheric chemistry.

Die 18 F-Fluorierung verschiedener Aminosäuren als Tracer für die Tumor-Diagnostik mittels Positronen-Emissions-Tomographie

Die Zielsetzung dieser Arbeit war die Synthese und Markierung, sowie die in vitro- und in vivo-Evaluierung zweier markierter Aminosäure. Es wurden die PET-Tumor-Tracer C1-(2-[18F]Fluoreth- ylamino)-asparagin und S-2-Amino-4-[18F]fluor-butansäure synthetisiert. Die Markierung zum C1-(2-[18F]Fluorethylamino)-asparagin wurde mit 2-[18F]Fluorethylamin als Precursor durchgeführt. Ausgehend von N,N-Dibenzyl-(2-bromethyl)-amin wurde zunächst N,N-Dibenzyl-(2-[18F]fluorethyl)-amin in einer nukleophilen Substiution mit [18F]Fluorid in Acetonitril bei 80 °C mit einer Reaktionsdauer von 5 min dargestellt. Zur Abtrennung überschüssigen [18F]Fluorids wurde das Roh-Produkt auf einer Sep-Pak Plus Kartusche (C18) fixiert und mit Acetonitril eluiert. Die Abspaltung der Benzyl-Schutzgruppen erfolgte durch die Zugabe von Pd/C zu dem eluierten N,N-Dibenzyl-(2-[18F]fluorethyl)-amin und Behandelung der Lösung im leichten Wasserstoffstrom. Im finalen Aufreinigungsschritt wird der Katalysator Pd/C mittels eines Membranfilters abgetrennt. Das 2-[18F]Fluorethylamin wird im Sauren in das Amino-Salz überführt und im Vakuum vom Lösungsmittel befreit. Die Markierung zum C1-(2-[18F]Fluorethylamino)-asparagin wurde in DMF durchgeführt. Die höchsten Ausbeuten werden nach 4 min bei 60 °C erhalten. Die Abspaltung der Schutzgruppe erfolgt durch Trifluoressigsäure bei Raumtemperatur in 8 min. Die Aufreinigung des C1-(2-[18F]Fluorethylamino)-asparagin mittels HPLC und Festphasenextraktion liegt das Produkt in einer isotonischne isotonischen Kochsalzlösung vor. Die in vitro-Versuche wurden mit C1-(2-[18F]Fluorethylamino)-asparagin an 5 verschiedenen Zelllinen durchgeführt, 3 Plattenepitele und 2 Melanome. Hierbei konnte eine erhöhte Akkumulation von C1 -(2-[18F]Fluorethylamino)-asparagin beobachtet werden, die innerhalb von 20 min einen konstanten Wert erreicht. Ein Blockade-Experiment zeigte, dass sich die Aufnahme von C1 -(2-[18F]Fluorethylamino)-asparagin durch gesättinge Asparagin-Lösung bei den Plattenepitelen gar nicht und bei den Melanomen nur leicht vermindern ließ. Da die Aufnahme von C1-(2-[18F]Fluorethylamino)-asparagin in die Zellen höher war als bei FDG bei dem gleichen Versuchsaufbau, wurden in vivo-Versuche angesetzt. Die in vivo-Versuche an Sprague Dawley Ratten mit C1-(2-[18 F]Fluorethylamino)-asparagin zeigten keine messbare Anreicherung von C1-(2-[18F]Fluorethylamino)-asparagin in Tumoren. Fast die komplette Aktivität wurde in der Niere und Blase wiedergefunden. Die Synthese von S-2-Amino-4-[18F]fluor-butansäure wurde über stereodirigierende Auxilliare realisiert. Dazu wurden die geeignetsten Auxillare ausgewählt und auf ihre Eignung verglichen. Der Vergleich der stereodirigierenden Auxilare zeigte, dass das (1R,2R,5R)-2-Hydroxy-2,6,6-trimethyl- bicyclo[3.1.1]hept-3-ylidenamino)-essigsäure tert.-butylester (Laue-Auxillar) am geeignetesten ist. Die 18F-Markierung von S-2-Amino-4-[18F]fluor-butansäure wurde so optimiert, dass eine möglichst hohe stereochemische Reinheit des Produktes erzielt wird. Die optische Reinheit von S-2-Amino-4-[18 F]fluor-butansäure wurde mit > 93 % ee berechnet. Die Synthese des Markierungsvorläufers wurde ausgehend vom Laue-Auxilliar aufgebaut. Als Abgangsgruppe hat sich die Tosylgruppe besonders bewährt. Sie lässt sich unter besonders schonenden Bedingungen in den säurelabilen (1R,2R,5R)-4-Hydroxy-2-(2-hydroxy-2,6,6-trimethyl-bi- cyclo[3.1.1]hept-3-ylidenamino) butansäure tert.-butylester einführen. Bei der 18F-Markierung von S-2-Amino-4-[18F]fluor-butansäure mittels n.c.a. [18F]Fluorid hat sich die Wahl des Basensystems als besonders wichtig erwiesen. Die maximale Ausbeuten von 55% wurde mit Oxalat als Basensystem in Acetonitril bei 80 °C und einer Reaktionszeit von 15 min erzielen. Die Abspaltung der Schutzgruppen und die Abtrennung des Produktes wird in mehreren Schritten durchgeführt einschließlich einer HPLC-Abtrennung. Es wird nach 150 min Synthesedauer das gereinigte S-2-Amino-4-[18F]fluor-butansäure in isotonischer Kochsalzlösung mit einer Ausbeute von > 10 % RCA erhalten. Bei in vivo-Versuchen an Sprague Dawley Ratten reicherte sich der Hauptteil der Aktivität in der Niere an und nur weniger als ein halbes Prozent der applizierten Aktivität fand sich in den Tumoren wieder. Nach 10 min wurde ein maximaler Wert erreicht, der sich bis zum Ende der Messung nicht verändert. Das Verhältnis von Tumoraktivität zu unspezifisch-gebundener Aktivität betrug 2,2. Damit liegt das Verhältnis im Bereich der meisten klinisch eingesetzten PET-Tumor-Tracer wie dem des O-(2-[18F]Fluorethyl)-L-tyrosin mit 1,5.

Untersuchungen zur Genexpression in Wurzeln der reblausresistenten Unterlagsrebsorte ’Börner’

Die reblausresistente Unterlagsrebsorte ’Börner’ reagiert auf einen Reblausbefall mit einer Hypersensitivitätsreaktion (HR), die sich in Form von Nekrosen an Blättern und Wurzeln zeigt. Im Rahmen dieser Dissertation wurde der Resistenzmechanismus mittels differenzieller Genexpressionsanalysen untersucht. Unter Anwendung der suppressiven subtraktiven Hybridisierung, der DNA-Microarraytechnik sowie der GeneFishingTM-Methode erfolgte ein Vergleich zwischen der Genexpression in hypersensitivem Wurzelgewebe und Normalgewebe der Unterlagsrebe ’Börner’. Neben der Reblaus induzierten HR wurde insbesondere auf die experimentelle Induktion durch das Pflanzenhormon Indol-3-Essigsäure (IES) zurückgegriffen. Damit sollten Kenntnisse über die Rolle der IES als auslösender Faktor der Resistenzreaktion gewonnen werden. Die Ergebnisse bestätigen die Annahme, dass die IES Pathogenabwehrreaktionen in ’Börner’ induziert. So konnten Hinweise auf die transkriptionelle Aktivierung Resistenz und HR assoziierter Proteine gefunden werden, wie z.B. Phytoalexine und pathogen-related (PR)-Proteine sowie Vertreter aus der hypersensitive-induced response-Familie. Es konnten weiterhin wertvolle Informationen im Hinblick auf die Transduktion des IES-Signals im Zusammenhang mit der Aktivierung von Resistenzreaktionen gewonnen werden. So wurden Hinweise auf die Beteiligung der Signalsubstanzen Ethylen, Salicylsäure, Jasmonsäure, Calcium sowie reaktiver Sauerstoffspezies gefunden. Es konnten zudem Anhaltspunkte für die Aktivierung des Auxin induzierten Ubiquitin/26S-Proteolyseweges und weiterer Signalkomponenten, wie z.B. Kinasen und Transkriptionsfaktoren, ermittelt werden. Auch auf die Beteiligung von Auxinrezeptoren konnte aufgrund der Resultate geschlossen werden. Damit war es im Rahmen der Dissertation möglich, potenzielle Signaltransduktionswege zu erarbeiten, die für weiterführende Untersuchungen des Reblausresistenzmechanismus von entscheidender Bedeutung sind.

Molekulargenetische Untersuchungen zur Reblausresistenz bei der Unterlagsrebe Börner

Dass Pflanzen gegen phytopathogene Infektionen resistent sind, ist das Ergebnis von multip-len Abwehrreaktionen. Eine solche ist auch die Hypersensitivitätsreaktion (HR). Sie ist die Folge eines Befalls von Börner mit Rebläusen und zeigt sich an Blättern und Wurzeln der resistenten Unterlagsrebe in Form von lokalen Nekrosen. Die Erzeugung von neuen, trans-genen reblausresistenten Unterlagsreben verlangt präzise Kenntnisse über die Mechanismen der Reblausresistenz. Um Resistenzgene zu identifizieren, wurden im Rahmen dieser Arbeit differenzielle Genexpressionsanalysen eingesetzt. Diese waren die Microarray Analyse mit der Geniom one Technik und die real time (RT) -PCR. Sie erlaubten eine Gegenüberstellung der Genexpression in behandeltem Wurzelgewebe mit der Expression im Normalgewebe der Unterlagsrebe Börner. Als experimenteller Induktor der HR in Börner diente die Indol-3-Essigsäure (IES), ein Bestandteil des Reblausspeichels. Frühere Untersuchungen zur Reb-lausresistenz zeigten, dass bei einer Behandlung mit IAA an Wurzeln von Börner Nekrosen entstehen, nicht jedoch an Wurzeln von der reblaustoleranten Unterlagssorte SO4 oder dem reblausanfälligem Edelreis. Das war der Grund, SO4 und Riesling als Vergleichsobjekte zu Börner für diese Studie auszuwählen. So sollte die Bedeutung der Rolle von IES als Auslö-ser der Resistenzmechanismen in Börner erklärt werden. Insgesamt konnten deutliche Unter-schiede in den Reaktionen der drei Rebsorten auf die IES Behandlung aufgedeckt werden. Während in Börner eine hohe Anzahl an Genen und diese intensiv auf den IES Reiz reagiert, fallen die Gene bei SO4 und Riesling zahlenmäßig kaum ins Gewicht und die Reaktionen der beiden Sorten auf IES zudem eher schwach aus. In der Summe waren es 27 Gene, die für die Reblausresistenz in Börner verantwortlich sein könnten. So konnte eine IES bedingte Aktivierung von Genen beobachtet werden, die bei der Produktion von Phytoalexinen be-deutsam sind, wie z.B. die phenylalanine ammonia-lyase, die lipoxygenase und die stilbene synthase. Weiter ließ sich eine Regulation von allgemein Stress assoziierten Genen und von Zellwandproteinen und eine Induktion von Signalkomponenten, etwa des Transkriptionsfak-tors ethylene response factor, nachweisen. Eine deutliche Hochregulation von Au-xintransportern in den IES behandelten Börnerwurzeln gab zudem Anhaltspunkte auf sorten-spezifische Unterschiede in der zellulären Aufnahme und Abgabe der IES. Durch die Ausar-beitung des Zusammenspiels der durch IES regulierten Gene konnten in dieser Arbeit wert-volle Hinweise auf die Mechanismen der Reblausresistenz in Börner gewonnen werden.

Biodegradable systems for the development of functional materials

This PhD work was aimed to design, develop, and characterize gelatin-based scaffolds, for the repair of defects in the muscle-skeletal system. Gelatin is a biopolymer widely used for pharmaceutical and medical applications, thanks to its biodegradability and biocompatibility. It is obtained from collagen via thermal denaturation or chemical-physical degradation. Despite its high potential as biomaterial, gelatin exhibits poor mechanical properties and a low resistance in aqueous environment. Crosslinking treatment and enrichment with reinforcement materials are thus required for biomedical applications. In this work, gelatin based scaffolds were prepared following three different strategies: films were prepared through the solvent casting method, electrospinning technique was applied for the preparation of porous mats, and 3D porous scaffolds were prepared through freeze-drying. The results obtained on films put into evidence the influence of pH, crosslinking and reinforcement with montmorillonite (MMT), on the structure, stability and mechanical properties of gelatin and MMT/gelatin composites. The information acquired on the effect of crosslinking in different conditions was utilized to optimize the preparation procedure of electrospun and freeze-dried scaffolds. A successful method was developed to prepare gelatin nanofibrous scaffolds electrospun from acetic acid/water solution and stabilized with a non-toxic crosslinking agent, genipin, able to preserve their original morphology after exposure to water. Moreover, the co-electrospinning technique was used to prepare nanofibrous scaffolds at variable content of gelatin and polylactic acid. Preliminary in vitro tests indicated that the scaffolds are suitable for cartilage tissue engineering, and that their potential applications can be extended to cartilage-bone interface tissue engineering. Finally, 3D porous gelatin scaffolds, enriched with calcium phosphate, were prepared with the freeze-drying method. The results indicated that the crystallinity of the inorganic phase influences porosity, interconnectivity and mechanical properties. Preliminary in vitro tests show good osteoblast response in terms of proliferation and adhesion on all the scaffolds.

Anwendung der CE-ICP-MS und RIMS sowie Entwicklung und Anwendung der CE-RIMS auf Umweltproben

Die vorliegende Arbeit wurde im Rahmen des Verbundprojektes „Wechselwirkung und Transport von Actiniden im natürlichen Tongestein unter Berücksichtigung von Huminstoffen und Tonorganika – Wechselwirkung von Neptunium und Plutonium mit natürlichem Tongestein“ durchgeführt. Diese Untersuchungen sollen die thermodynamische Datenbasis für Actiniden erweitern sowie Informationen zur Ableitung von Bewertungskriterien für die Endlagerung radioaktiver Abfälle in Ton als Wirtsgestein, insbesondere über das Rückhaltevermögen von Tongestein gegenüber Radionukliden, liefern. Dabei stand die Anwendung verschiedener Speziationstechniken wie CE-ICP-MS, UV/VIS und die apparative Entwicklung der CE-RIMS im Vordergrund. Es sollte das Verhalten von Plutonium in umweltrelevanten Medien und Konzentrationen, im Ultraspurenbereich, untersucht werden. Unabhängig davon sollten Uranproben aus dem 2. Weltkrieg und Umweltproben des Landesamts für Umwelt und Forsten Rheinland-Pfalz auf ihren Plutoniumgehalt analysiert werden. Dazu wurde zunächst ein neues ICP-MS-Gerät Agilent 7500ce in Betrieb genommen und auf die Verwendung in Kombination mit der Kapillarelektrophorese optimiert. Die erreichte Nachweisgrenze für die vier Oxidationsstufen des Pu beträgt 0,05 ppb des gesamten Plutoniums in Lösung. Mit Hilfe der CE-ICP-MS wurde die Redoxstabilität einer Mischung aus verschiedenen Oxidationszuständen des Plutoniums in Opalinus-Ton-Porenwasser und Vergleichsmedien unter aeroben und anaeroben Bedingungen mit der CE untersucht. Die Untersuchungen zeigen das Pu(III) bis zu 40 min im verwendeten Elektrolytsystem stabil ist und dann oxidiert wird. In Porenwasser wurde als vorherrschende Spezies Pu(V) bestimmt. Die Redoxstabilität von Pu(VI) wurde untersucht, dabei wurde festgestellt, dass sich Pu(VI) bereits durch einfaches Verdünnen reduzieren lässt. Weiterhin wurden die Kd-Werte für die Sorption von Plutonium an Opalinuston unter aeroben und anaeroben Bedingungen für Pu(III) und Pu(IV) im System Porenwasser/Opalinuston von Kd(aerob) Pu(III) ≈ 53 m3/kg, Kd(aerob) Pu(IV) ≈ 14 m3/kg, Kd(anaerob) Pu(III) ≈ 114 m3/kg, Kd(anaerob) Pu(IV) ≈ 178 m3/kg bestimmt. Ein weiterer Schwerpunkt der Arbeit war die Entwicklung, Optimierung und Anwendung der Kopplung CE-RIMS zur Speziation des Plutoniums im Ultraspurenbereich. Dies konnte erfolgreich in mehreren Schritten durchgeführt und an den Proben aus den Batchversuchen zur Kd-Wert Bestimmung angewandt werden. Der Memory-Effekt des an den Kapillarwänden sorbierenden Pu(IV) konnte mit der empfindlichen Kopplung CE-RIMS ebenfalls nachgewiesen werden.

Isolierung von Essigsäure-, Propionsäure- und Buttersäure-bildenden Bakterien aus Biogasanlagen

In der vorliegenden Arbeit wurden Essigsäure-, Propionsäure und Buttersäure-bildende Bakterien aus einer thermophilen und drei mesophilen Biogasanlagen sowie aus zwei Hochdruck-Biogas-Laborfermentern isoliert. Die Fermenter waren mit dem nachwachsenden Rohstoff Maissilage, teilweise mit Rinder- oder Schweinegülle und weiteren festen Inputstoffen gefüttert. Für die Isolierung von Säure-bildenden Bakterien wurde ein Mineralsalzmedium verwendet, welchem als Kohlenstoffquelle Na-DL-Laktat, Succinat, Ethanol, Glycerin, Glucose oder eine Aminosäuremischung (Alanin, Serin, Threonin, Glutaminsäure, Methionin und Cystein) hinzugefügt wurde. Hierbei handelt es sich um Substrate, welche beim anaeroben Abbau während der Hydrolyse oder der primären Gärung entstehen können. Die erhaltenen Isolate waren in der Lage, aus diesen Substraten Essigsäure, Propionsäure oder Buttersäure zu bilden. Insgesamt wurden aus den beprobten Anlagen 49 Isolate gewonnen, welche zu den Phyla Firmicutes, Tenericutes oder Thermotogae gehörten. Mit Hilfe von 16S rDNA-Sequenzen konnten die meisten Isolate als Clostridium sporosphaeroides, Defluviitoga tunisiensis und Dendrosporobacter sp. identifiziert werden. Die Bildung von Essigsäure, Propionsäure oder Buttersäure wurde in Kulturen von Isolaten festgestellt, welche als folgende Arten identifiziert wurden: Bacillus thermoamylovorans, Clostridium aminovalericum, Clostridium cochlearium/Clostridium tetani, Clostridium sporosphaeroides, Dendrosporobacter sp., Proteiniborus sp., Selenomonas bovis und Tepidanaerobacter sp. Zwei Isolate, verwandt mit Thermoanaerobacterium thermosaccharolyticum, konnten Buttersäure und Milchsäure bilden. In Kulturen von Defluviitoga tunisiensis wurde Essigsäurebildung festgestellt. Ein Vergleich der 16S rDNA-Sequenzen mit Datenbanken und die Ergebnisse der PCR-Amplifikationen mit Isolat-spezifischen Primerpaaren ergaben zusätzlich Hinweise, dass es sich bei einigen Isolaten um neue Arten handeln könnte (z. B. Stamm Tepidanaerobacter sp. AS34, Stamm Proteiniborus sp. ASG1.4, Stamm Dendrosporobacter sp. LG2.4, Stamm Desulfotomaculum sp. EG2.4, Stamm Gallicola sp. SG1.4B und Stamm Acholeplasma sp. ASSH51). Durch die Entwicklung Isolat-spezifischer Primerpaare, abgeleitet von 16S rDNA-Sequenzen der Isolate oder Referenzstämmen, konnten die Isolate in Biogasanlagen detektiert und mittels qPCR quantifiziert werden (hauptsächlich im Bereich zwischen 1000 bis 100000000 Kopien der 16S rDNA/g BGA-Probe). Weiterhin konnten die Isolate mit Hilfe physiologischer Versuche charakterisiert und deren Rolle in der anaeroben Abbaukette diskutiert werden. Die Art Defluviitoga tunisiensis scheint eine große Bedeutung in Biogasanlagen zu spielen. Defluviitoga tunisiensis wurde am häufigsten in Untersuchungen im Rahmen der vorliegenden Arbeit isoliert und konnte auch mit Hilfe des entwickelten Primerpaares in hohen Abundanzen in den beprobten Biogasanlagen detektiert werden (10000 - 100000000 Kopien der 16S rDNA/g BGA-Probe). Die manuelle Annotation des Gesamtgenoms sowie die Substratverwertungsversuche haben gezeigt, dass Defluviitoga tunisiensis ein sehr breites Substratspektrum in der Verwertung von Kohlenhydraten besitzt und dadurch möglicherweise eine wichtige Rolle bei der Verwertung von Biomasse in Biogasanlagen einnimmt. Mit Hilfe der Ergebnisse der vorliegenden Arbeit konnten somit neue Einblicke in die zweite Stufe des anaeroben Abbaus, die Acidogenese, in Biogasanlagen gegeben werden. rn

Distribution of metals in several vineyards of North Italy: from soil to wine

Nowadays we live in densely populated regions and this leads to many environmental issues. Among all pollutants that human activities originate, metals are relevant because they can be potentially toxic for most of living beings. We studied the fate of Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn in a vineyard environment analysing samples of plant, wine and soil. Sites were chosen considering the type of wine produced, the type of cultivation (both organic and conventional agriculture) and the geographic location. We took vineyards that cultivate the same grape variety, the Trebbiano). We investigated 5 vineyards located in the Ravenna district (Italy): two on the Lamone Valley slopes, one in the area of river-bank deposits near Ravenna city, then a farm near Lugo and one near Bagnacavallo in interfluve regions. We carried out a very detailed characterization of soils in the sites, including the analysis of: pH, electric conductivity, texture, total carbonate and extimated content of dolomite, active carbonate, iron from ammonium oxalate, Iron Deficiency Chlorosis Index (IDCI), total nitrogen and organic carbon, available phosphorous, available potassium and Cation Exchange Capacity (CEC). Then we made the analysis of the bulk chemical composition and a DTPA extraction to determine the available fraction of elements in soils. All the sites have proper ground to cultivate, with already a good amount of nutrients, such as not needing strong fertilisations, but a vineyard on hills suffers from iron deficiency chlorosis due to the high level of active carbonate. We found some soils with much silica and little calcium oxide that confirm the marly sandstone substratum, while other soils have more calcium oxide and more aluminium oxide that confirm the argillaceous marlstone substratum. We found some critical situations, such as high concentrations of Chromium, especially in the farm near Lugo, and we noticed differences between organic vineyards and conventional ones: the conventional ones have a higher enrichment in soils of some metals (Copper and Zinc). Each metal accumulates differently in every single part of grapevines. We found differences between hill plants and lowland ones: behaviors of plants in metal accumulations seems to have patterns. Metals are more abundant in barks, then in leaves or sometimes in roots. Plants seem trying to remove excesses of metal storing them in bark. Two wines have excess of acetic acid and one conventional farm produces wine with content of Zinc over the Italian law limit. We already found evidence of high values relating them with uncontaminated environments, but more investigations are suggested to link those values to their anthropogenic supplies.

Olfactory function improves following hemodialysis

Olfactory function has been shown to be affected in chronic kidney disease; however, studies are contradictory and little is known on the effects of dialysis. To resolve these issues we tested olfactory function in 24 healthy controls and in 28 patients with chronic kidney disease receiving hemodialysis (20 patients) or peritoneal dialysis (the other 8). As assays for olfactory function we measured smell identification, n-butanol and acetic acid thresholds, Kt/V urea, percentage reduced urea, and weights before and after dialysis. Olfactory function was also self-rated by the participants. Compared to healthy controls, predialysis olfactory function was moderately but significantly decreased in the two dialysis groups, with hemodialysis patients being more affected. Patients self-rated olfactory function similar to that of healthy controls, suggesting that patients are unaware of the olfactory decrease. Olfactory function was significantly improved by one hemodialysis session. Neither body mass index, total volume loss, nor any other dialysis parameter correlated with olfactory function or its restitution following hemodialysis. The observed pattern of improvement suggests underlying mixed peripheral and central mechanisms. Thus, olfactory dysfunction in patients with chronic kidney disease is readily reversible by hemodialysis.

Seasonal variation and sources of low molecular weight organic acids in precipitation in the rural area of Anshun

Low mol. wt. (LMW) org. acids are important and ubiquitous chem. constituents in the atm. A comprehensive study of the chem. compn. of pptn. was carried out from June 2007 to June 2008 at a rural site in Anshun, in the west of Guizhou Province, China. During this period, 118 rainwater samples were collected and the main LMW carboxylic acids were detd. using ion chromatog. The av. pH of rainwater was 4.89 which is a typical acidic value. The most abundant carboxylic acids were formic acid (vol. wt. mean concn.: 8.77 μmol L-1) and acetic acid (6.90 μmol L-1), followed by oxalic acid (2.05 μmol L-1). The seasonal variation of concns. and wet deposition fluxes of org. acids indicated that direct vegetation emissions were the main sources of the org. acids. Highest concns. were obsd. in winter and were ascribed to the low winter rainfall and the contribution of other air pollution sources northeast of the study area. The ratio of formic and acetic acids in the pptn. ([F/A]T) was proposed as an indicator of pollution source. This suggested that the pollution resulted from direct emissions from natural or anthropogenic sources. Comparison with acid pptn. in other urban and rural areas in Guizhou showed that there was a decreasing contribution of LMW org. acids to free acidity and all anions in rainwater from urban to remote rural areas. Consequently, it is necessary to control emissions of org. acids to reduce the frequency of acid rain, esp. in rural and remote areas. [on SciFinder(R)]

Unexpected sensitivity of sst2 antagonists to N-terminal radiometal modifications

Chelated somatostatin agonists have been shown to be sensitive to N-terminal radiometal modifications, with Ga-DOTA agonists having significantly higher binding affinity than their Lu-, In-, and Y-DOTA correlates. Recently, somatostatin antagonists have been successfully developed as alternative tracers to agonists. The aim of this study was to evaluate whether chelated somatostatin antagonists are also sensitive to radiometal modifications and how. We have synthesized 3 different somatostatin antagonists, DOTA-p-NO(2)-Phe-c[D-Cys-Tyr-D-Aph(Cbm)-Lys-Thr-Cys]-D-Tyr-NH(2), DOTA-Cpa-c[D-Cys-Aph(Hor)-D-Aph(Cbm)-Lys-Thr-Cys]-D-Tyr-NH(2) (DOTA-JR11), and DOTA-p-Cl-Phe-c[D-Cys-Tyr-D-Aph(Cbm)-Lys-Thr-Cys]-D-Tyr-NH(2), and added various radiometals including In(III), Y(III), Lu(III), Cu(II), and Ga(III). We also replaced DOTA with 1,4,7-triazacyclononane,1-glutaric acid-4,7-acetic acid (NODAGA) and added Ga(III). The binding affinity of somatostatin receptors 1 through 5 was evaluated in all cases. In all 3 resulting antagonists, the Ga-DOTA analogs were the lowest-affinity radioligands, with a somatostatin receptor 2 binding affinity up to 60 times lower than the respective Y-DOTA, Lu-DOTA, or In-DOTA compounds. Interestingly, however, substitution of DOTA by the NODAGA chelator was able to increase massively its binding affinity in contrast to the Ga-DOTA analog. The 3 NODAGA analogs are antagonists in functional tests. In vivo biodistribution studies comparing (68)Ga-DOTATATE agonist with (68)Ga-DOTA-JR11 and (68)Ga-NODAGA-JR11 showed not only that the JR11 antagonist radioligands were superior to the agonist ligands but also that (68)Ga-NODAGA-JR11 was the tracer of choice and preferable to (68)Ga-DOTA-JR11 in transplantable HEK293-hsst(2) tumors in mice. One may therefore generalize that somatostatin receptor 2 antagonists are sensitive to radiometal modifications and may preferably be coupled with a (68)Ga-NODAGA chelator-radiometal complex.