CFD modeling of two-phase boiling flows in the slug flow regime with an interface capturing technique

The objective of this thesis was to improve the commercial CFD software Ansys Fluent to obtain a tool able to perform accurate simulations of flow boiling in the slug flow regime. The achievement of a reliable numerical framework allows a better understanding of the bubble and flow dynamics induced by the evaporation and makes possible the prediction of the wall heat transfer trends. In order to save computational time, the flow is modeled with an axisymmetrical formulation. Vapor and liquid phases are treated as incompressible and in laminar flow. By means of a single fluid approach, the flow equations are written as for a single phase flow, but discontinuities at the interface and interfacial effects need to be accounted for and discretized properly. Ansys Fluent provides a Volume Of Fluid technique to advect the interface and to map the discontinuous fluid properties throughout the flow domain. The interfacial effects are dominant in the boiling slug flow and the accuracy of their estimation is fundamental for the reliability of the solver. Self-implemented functions, developed ad-hoc, are introduced within the numerical code to compute the surface tension force and the rates of mass and energy exchange at the interface related to the evaporation. Several validation benchmarks assess the better performances of the improved software. Various adiabatic configurations are simulated in order to test the capability of the numerical framework in modeling actual flows and the comparison with experimental results is very positive. The simulation of a single evaporating bubble underlines the dominant effect on the global heat transfer rate of the local transient heat convection in the liquid after the bubble transit. The simulation of multiple evaporating bubbles flowing in sequence shows that their mutual influence can strongly enhance the heat transfer coefficient, up to twice the single phase flow value.

Studio e sperimentazione del comportamento vibratorio di una lamella azionata da un attuatore piezoelettrico

Studio di una lamella di acciaio di dimensioni relativamente ridotte, a cui �� incollato un attuatore piezoelettrico che ne causa la vibrazione, sfruttando il fenomeno della risonanza. Tale struttura possiede numerose peculiarit�� geometriche e di funzionamento che ne determinano il comportamento dinamico. Ci si prefigge l���obiettivo di studiare, con l���ausilio di prove sperimentali, il comportamento vibratorio del sistema, al fine di realizzare un modello agli elementi finiti che ne simuli il funzionamento e che sia impiegabile nella previsione degli effetti di modifiche strutturali e dinamiche.

Sviluppo e validazione di metodologie di analisi numerica per flussi cavitanti all'interno di iniettori ad alta pressione

Il continuo sviluppo dei sistemi di iniezione, rispondente ad aumento di performance unito alla riduzione delle emissioni inquinanti, evidenzia sempre pi�� la necessit�� di studiare i fenomeni cavitanti che si instaurano all���interno degli iniettori. La cavitazione, infatti, se particolarmente intensa e prolungata nel tempo porta all���erosione del materiale con la conseguente rottura dell���organo elettromeccanico. Attraverso un confronto tra le diverse tipologie di fori iniettore, si �� messa a punto una metodologia di analisi per prevedere quali siano le zone dell���iniettore a maggior rischio di danneggiamento per erosione da cavitazione e quale sia l���influenza della geometria su queste. Lo studio �� stato effettuato con il software commerciale FLUENT, codice di simulazione fluidodinamica di ANSYS.

Hydrodynamic induced by an array of wave energy converters. Experimental and numerical analysis

The thesis analyses the hydrodynamic induced by an array of Wave energy Converters (WECs), under an experimental and numerical point of view. WECs can be considered an innovative solution able to contribute to the green energy supply and ���at the same time��� to protect the rear coastal area under marine spatial planning considerations. This research activity essentially rises due to this combined concept. The WEC under exam is a floating device belonging to the Wave Activated Bodies (WAB) class. Experimental data were performed at Aalborg University in different scales and layouts, and the performance of the models was analysed under a variety of irregular wave attacks. The numerical simulations performed with the codes MIKE 21 BW and ANSYS-AQWA. Experimental results were also used to calibrate the numerical parameters and/or to directly been compared to numerical results, in order to extend the experimental database. Results of the research activity are summarized in terms of device performance and guidelines for a future wave farm installation. The device length should be ���tuned��� based on the local climate conditions. The wave transmission behind the devices is pretty high, suggesting that the tested layout should be considered as a module of a wave farm installation. Indications on the minimum inter-distance among the devices are provided. Furthermore, a CALM mooring system leads to lower wave transmission and also larger power production than a spread mooring. The two numerical codes have different potentialities. The hydrodynamics around single and multiple devices is obtained with MIKE 21 BW, while wave loads and motions for a single moored device are derived from ANSYS-AQWA. Combining the experimental and numerical it is suggested ���for both coastal protection and energy production��� to adopt a staggered layout, which will maximise the devices density and minimize the marine space required for the installation.

Cannabinoid system combined to classic targets for a new MTDL strategy: design and synthesis of natural inspired molecules for Alzheimer's disease

In this thesis is described the design and synthesis of potential agents for the treatment of the multifactorial Alzheimer���s disease (AD). Our multi-target approach was to consider cannabinoid system involved in AD, together with classic targets. In the first project, designed modifications were performed on lead molecule in order to increase potency and obtain balanced activities on fatty acid amide hydrolase and cholinesterases. A small library of compounds was synthesized and biological results showed increased inhibitory activity (nanomolar range) related to selected target. The second project was focused on the benzofuran framework, a privileged structure being a common moiety found in many biologically active natural products and therapeutics. Hybrid molecules were designed and synthesized, focusing on the inhibition of cholinesterases, A�� aggregation, FAAH and on the interaction with CB receptors. Preliminary results showed that several compounds are potent CB ligands, in particular the high affinity for CB2 receptors, could open new opportunities to modulate neuroinflammation. The third and the fourth project were carried out at the IMS, Aberdeen, under the supervision of Prof. Matteo Zanda. The role of the cannabinoid system in the brain is still largely unexplored and the relationship between the CB1 receptors functional modification, density and distribution and the onset of a pathological state is not well understood. For this reasons, Rimonabant analogues suitable as radioligands were synthesized. The latter, through PET, could provide reliable measurements of density and distribution of CB1 receptors in the brain. In the fifth project, in collaboration with CHyM of York, the goal was to develop arginine analogues that are target specific due to their exclusively location into NOS enzymes and could work as MRI contrasting agents. Synthesized analogues could be suitable substrate for the transfer of polarization by p-H2 molecules through SABRE technique transforming MRI a more sensitive and faster technique.

Design of a GNSS receiver for the ESEO mission

This thesis was carried out inside the ESA's ESEO mission and focus in the design of one of the secondary payloads carried on board the spacecraft: a GNSS receiver for orbit determination. The purpose of this project is to test the technology of the orbit determination in real time applications by using commercial components. The architecture of the receiver includes a custom part, the navigation computer, and a commercial part, the front-end, from Novatel, with COCOM limitation removed, and a GNSS antenna. This choice is motivated by the goal of demonstrating the correct operations in orbit, enabling a widespread use of this technology while lowering the cost and time of the device���s assembly. The commercial front-end performs GNSS signal acquisition, tracking and data demodulation and provides raw GNSS data to the custom computer. This computer processes this raw observables, that will be both transferred to the On-Board Computer and then transmitted to Earth and provided as input to the recursive estimation filter on-board, in order to obtain an accurate positioning of the spacecraft, using the dynamic model. The main purpose of this thesis, is the detailed design and development of the mentioned GNSS receiver up to the ESEO project Critical Design Review, including requirements definition, hardware design and breadboard preliminary test phase design.

FEM and experimental analysis of a wind turbine blade

This paperwork compares the a numerical validation of the finite element model (FEM) with respect the experimental tests of a new generation wind turbine blade designed by TPI Composites Inc. called BSDS (Blade System Design Study). The research is focused on the analysis by finite element (FE) of the BSDS blade and its comparison with respect the experimental data from static and dynamic investigations. The goal of the research is to create a general procedure which is based on a finite element model and will be used to create an accurate digital copy for any kind of blade. The blade prototype was created in SolidWorks and the blade of Sandia National Laboratories Blade System Design Study was accurately reproduced. At a later stage the SolidWorks model was imported in Ansys Mechanical APDL where the shell geometry was created and modal, static and fatigue analysis were carried out. The outcomes of the FEM analysis were compared with the real test on the BSDS blade at Clarkson University laboratory carried out by a new procedures called Blade Test Facility that includes different methods for both the static and dynamic test of the wind turbine blade. The outcomes from the FEM analysis reproduce the real behavior of the blade subjected to static loads in a very satisfying way. A most detailed study about the material properties could improve the accuracy of the analysis.

Confronto tra Bluetooth classic e Bluetooth low energy nelle comunicazioni tra sensori inerziali e dispositivi mobili in applicazioni biomeccaniche in ambito medico e sportivo

In questo elaborato sono stati confrontati i moduli bluetooth WT11, BLE113 , BT121 rispetto alle loro caratteristiche di banda, consumo, range e utilizzabilita in un contesto applicativo stringente come quello degli utilizzi biomeccanici. Si sono prima elencati i settori di riferimento, per poi descrivere il contesto applicativo in ambito medico e sportivo. Il confronto finale ha tenuto conto delle modalita di comunicazione bluetooth classic e bluetooth low energy, cercando di motivare quale modulo risulti migliore per questo particolare e innovativo contesto.

Characterization of novel StAR (steroidogenic acute regulatory protein) mutations causing non-classic lipoid adrenal hyperplasia

Context Steroidogenic acute regulatory protein (StAR) is crucial for transport of cholesterol to mitochondria where biosynthesis of steroids is initiated. Loss of StAR function causes lipoid congenital adrenal hyperplasia (LCAH). Objective StAR gene mutations causing partial loss of function manifest atypical and may be mistaken as familial glucocorticoid deficiency. Only a few mutations have been reported. Design To report clinical, biochemical, genetic, protein structure and functional data on two novel StAR mutations, and to compare them with published literature. Setting Collaboration between the University Children's Hospital Bern, Switzerland, and the CIBERER, Hospital Vall d'Hebron, Autonomous University, Barcelona, Spain. Patients Two subjects of a non-consanguineous Caucasian family were studied. The 46,XX phenotypic normal female was diagnosed with adrenal insufficiency at the age of 10 months, had normal pubertal development and still has no signs of hypergonodatropic hypogonadism at 32 years of age. Her 46,XY brother was born with normal male external genitalia and was diagnosed with adrenal insufficiency at 14 months. Puberty was normal and no signs of hypergonadotropic hypogonadism are present at 29 years of age. Results StAR gene analysis revealed two novel compound heterozygote mutations T44HfsX3 and G221S. T44HfsX3 is a loss-of-function StAR mutation. G221S retains partial activity (~30%) and is therefore responsible for a milder, non-classic phenotype. G221S is located in the cholesterol binding pocket and seems to alter binding/release of cholesterol. Conclusions StAR mutations located in the cholesterol binding pocket (V187M, R188C, R192C, G221D/S) seem to cause non-classic lipoid CAH. Accuracy of genotype-phenotype prediction by in vitro testing may vary with the assays employed.

Structural capacity of steel tubular cast-in-place piling

Steel tubular cast-in-place pilings are used throughout the country for many different project types. These piles are a closed-end pipe with varying wall thicknesses and outer diameters, that are driven to depth and then the core is filled with concrete. These piles are typically used for smaller bridges, or secondary structures. Mostly the piling is designed based on a resistance based method which is a function of the soil properties of which the pile is driven through, however there is a structural capacity of these members that is considered to be the upper bound on the loading of the member. This structural capacity is given by the AASHTO LRFD (2010), with two methods. These two methods are based on a composite or non-composite section. Many state agencies and corporations use the non-composite equation because it is requires much less computation and is known to be conservative. However with the trends of the time, more and more structural elements are being investigated to determine ways to better understand the mechanics of the members, which could lead to more efficient and safer designs. In this project, a set of these piling are investigated. The way the cross section reacts to several different loading conditions, along with a more detailed observation of the material properties is considered as part of this research. The evaluation consisted of testing stub sections of pile with varying sizes (10-�����, 12-�����), wall thicknesses (0.375���, 0.5���), and testing methods (whole compression, composite compression, push through, core sampling). These stub sections were chosen as they would represent a similar bracing length to many different soils. In addition, a finite element model was developed using ANSYS to predict the strains from the testing of the pile cross sections. This model was able to simulate the strains from most of the loading conditions and sizes that were tested. The bond between the steel shell and the concrete core, along with the concrete strength through the depth of the cross section were some of the material properties of these sections that were investigated.

Verteporfin therapy in occult with no classic CNV due to AMD: results of the Photodynamic Therapy in Occult-Only Lesions study

PURPOSE: To provide further information on verteporfin photodynamic therapy in occult with no classic choroidal neovascularization (CNV) secondary to age-related macular degeneration (AMD). METHODS: Verteporfin therapy was administered at baseline and then at months 3, 6, and 9, if fluorescein leakage from CNV was evident on angiography. RESULTS: Of 202 patients enrolled, 184 completed 12 months. Each patient was treated in one eye only. All study eyes received verteporfin therapy at baseline, with a progressive decrease in the number treated at subsequent visits (mean 2.5 treatments during 12 months). The mean change in visual acuity letter score from baseline to month 12 was -11.9. At month 12, 164 eyes (82.4%) had lost <30 letters of visual acuity, 123 eyes (61.8%) had lost <15 letters, 78 eyes (39.2%) had lost <5 letters, 31 (15.6%) had >5-letter increase, and 7 (3.5%) had >15-letter improvement. The percentage of eyes with fluorescein leakage from CNV decreased from 75.5% at month 3 to 25.1% at month 12. Adverse events were documented for 54% patients. Few patients had treatment-associated adverse events (7%). Acute severe visual acuity decrease occurred in two eyes (1%), one of which had visual acuity that returned to baseline by the next follow-up visit. CONCLUSIONS: This study provides additional evidence that over 12 months, verteporfin is generally well tolerated and maintains or improves visual acuity in over one-third of eyes containing occult-only CNV. Verteporfin also improved anatomical outcomes by reducing leakage from CNV in at least two-thirds of eyes.

Classic and overlap chronic graft-versus-host disease (cGVHD) is associated with superior outcome after extracorporeal photopheresis (ECP)

The National Institutes of Health (NIH) classification of graft-versus-host disease (GVHD) is a significant improvement over prior classifications, and has prognostic implications. We hypothesized that the NIH classification of GVHD would predict the survival of patients with GVHD treated with extracorporeal photopheresis (ECP). Sixty-four patients with steroid refractory/dependent GVHD treated with ECP were studied. The 3-year overall survival (OS) was 36% (95% confidence interval [CI] 13-59). Progressive GVHD was seen in 39% of patients with any acute GVHD (aGVHD) (classic acute, recurrent acute, overlap) compared to 3% of patients with classic chronic GVHD (cGVHD) (P=.002). OS was superior for patients with classic cGVHD (median survival, not reached) compared to overlap GVHD (median survival, 395 days, 95% CI 101 to not reached) and aGVHD (delayed, recurrent or persistent) (median survival, 72 days, 95% CI 39-152). In univariate analyses, significant predictors of survival after ECP included GVHD subtype, bilirubin, platelet count, and steroid dose. In multivariate analyses overlap plus classic cGVHD was an independent prognostic feature predictive of superior survival (hazard ratio [HR] 0.34, 95% CI 0.14-0.8, p=.014). This study suggests that NIH classification can predict outcome after ECP for steroid refractory/dependent GVHD.