Clinical evaluation of low-level laser therapy and fluoride varnish for treating cervical dentinal hypersensitivity

The aim of this study was to evaluate in vivo the use of low-level galium-aluminium-arsenide (GaAlAs) (BDP 600) laser and sodium fluoride varnish (Duraphat((R))) in the treatment of cervical dentine hypersensitivity. Twelve patients, with at least two sensitive teeth were selected. A total of 60 teeth were included in the trial. Prior to desensitizing treatment, dentine hypersensitivity was assessed by a thermal stimulus and patients' response to the examination was considered to be a control. The GaAlAs laser (15 mW, 4 J/cm(2)) was irradiated on contact mode and fluoride varnish was applied at cervical region. The efficiency of the treatments was assessed at three examination periods: immediately after first application, 15 and 30 days after the first application. The degree of sensitivity was determined following predefined criteria. Data were submitted to analysis and no statistically significant difference was observed between fluoride varnish and laser. Considering the treatments separately, there was no significant difference for the fluoride varnish at the three examination periods, and for laser therapy, significant difference (P < 0.05) was found solely between the values obtained before the treatment and 30 days after the first application. It may be concluded that both treatments may be effective in decreasing cervical dentinal hypersensitivity. Moreover, the low-level GaAlAs laser showed improved results for treating teeth with higher degree of sensitivity.

Use of bovine bone graft and bone membrane in defects surgically created in the cranial vault of rabbits. Histologic comparative analysis

Purpose: This study was proposed to analyze histologically the process of repairing bone defects created surgically in the cranial vaults of rabbits. Materials and Methods: Thirty adult male rabbits (Oryctolagus cunilicus) received, under general anesthesia, bilateral parietal osteotomies by means of a 6mm-diameter trephine. The bony defects were divided into 4 groups. In group 1 the defect did not receive any treatment; in group 2 the defect was filled with lyophilized bovine bone (Biograft); in group 3 it was filled with bovine bone and covered with a bone matrix membrane (Bioplate); in group 4 it was covered with a bone matrix membrane. Animals were sacrificed in 3 equal groups at 15, 30, and 60 days. The specimens were subjected to routine laboratory procedures to evaluate the degree of bone repair. Results: After 60 days, new bone formation in group 2 was not satisfactory when compared to that of group 3. Large amounts of new bone formation in maturation were seen in group 3. In the defects covered with a membrane the results were similar to those of group 1 (ie, the cavity was filled with fibrous connective tissue). The implanted bone and membranes were totally resorbed. Discussion and Conclusions: the use of a membrane served as a barrier against the migration of cells from the adjacent tissue and the bone graft/membrane preserved the cavity space, resulting in an enhanced osteogenic effect.

Influence of light guide tip used in the photo-activation on degree of conversion and hardness of one nanofilled dental composite

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Degree of conversion of nanofilled and microhybrid composite resins photo-activated by different generations of LEDs

Objective: This study aimed at evaluating the degree of conversion (DC) of four composite resins, being one nanofilled and 3 microhybrid resins, photo-activated with second- and third-generation light-emitting diodes (LEDs). Material and methods: Filtek (TM) Z350 nanofilled composite resins and Amelogen (R) Plus, Vit-l-escence (TM) and Opallis microhybrid resins were photo-activated with two second-generation LEDs (Radii-cal and Elipar Free Light (TM) 2) and one third-generation LED (Ultra-Lume LED 5) by continuous light mode, and a quartz halogen-tungsten bulb (QHT, control). After 24 h of storage, the samples were pulverized into fine powder and 5 mg of each material were mixed with 100 mg of potassium bromide (KBr). After homogenization, they were pressed, which resulted in a pellet that was evaluated using an infrared spectromer (Nexus 470, Thermo Nicolet) equipped with TGS detector using diffuse reflectance (32 scans, resolution of 4 cm(-1)) coupled to a computer. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1). Results: The ANOVA showed a significant effect on the interaction between the light-curing units (LCUs) and the composite resins (p<0.001). The Tukey's test showed that the nanofilled resin (Filtek (TM) Z350) and Opallis when photo-activated by the halogen lamp (QTH) had the lowest DC compared with the other microhybrid composite resins. The DC of the nanofilled resin (Filtek (TM) Z350) was also lower using LEDs. The highest degrees of conversion were obtained using the third-generation LED and one of second-generation LEDs (Elipar Free Light (TM) 2). Conclusions: The nanofilled resin showed the lowest DC, and the Vit-l-escence (TM) microhybrid composite resin showed the highest DC. Among the LCUs, it was not possible to establish an order, even though the second-generation LED Radii-cal provided the lowest DC.

Continuous and gradual photo-activation methods: influence on degree of conversion and crosslink density of composite resins

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morphological and histochemical study of the myotomal muscle in pacu (Piaractus mesopotamicus Holmberg, 1887) during the initial growth phases

Morphological and histochemical methods were used to evaluate the myotomal muscle characteristics of pacu (Piaractus mesopotamicus) from hatching to 40 days old. During the larval period, the musculature consisted predominantly of white muscle. White and red muscle mass increased at 10, 20, 30 and 40 days after hatching. The larvae had round muscle fibers with a moderate degree of maturation and central nuclei. In subsequent phases, small and immature fibers were visible near larger and more differentiated fibers. Undifferentiated cells or presumptive myoblasts located in embryogenic zones were visible in the dorsal and ventral regions, and were more evident at 30 and 40 days. The red muscle fibers located in the subdermal region, had oxidative metabolism and slow contraction, whereas the more predominant white muscle fibers had glycolytic metabolism and fast contraction. Our findings indicate that during the initial phases, myotomal muscle growth in pacu occurs by both, muscle fiber hypertrophy and hyperplasia. The analysis of frequency of red and white muscle fibers shows that hyperplastic growth is intense in this period. As the growth rate in adult fish is related to the number of muscle fibers in young fish, extrinsic factors could change the muscle fiber phenotype and influence their ultimate size.

Diet compounds, glycemic index and obesity-related cardiac effects

Background: Diet compounds may influence obesity-related cardiac oxidative stress and metabolic sifting. Carbohydrate-rich diet may be disadvantageous from fat-rich diet to cardiac tissue and glycemic index rather than lipid profile may predict the obesity-related cardiac effects.Materials and methods: Male Wistar rats were divided into three groups (n=8/group): (C) receiving standard chow (3.0 kcal/g); (CRD) receiving carbohydrate-rich diet (4.0 kcal/g), and (FRD) receiving fat-rich diet (4.0 kcal/g). Rats were sacrificed after the oral glucose tolerance test (OGTT) at 60 days of dietary treatments. Lipid profile and oxidative stress parameters were determined in serum. Myocardial samples were used to determine oxidative stress, metabolic enzymes, glycogen and triacylglycerol.Results: FRD rats showed higher final body weight and body mass index than CRD and C. Serum cholesterol and low-density lipoprotein were higher in FRD than in CRD, while triacylglycerol and oxidized low-density lipoprotein cholesterol were higher in CRD than in FRD. CRD rats had the highest myocardial lipid hydroperoxide and diminished superoxide dismutase and catalase activities. Myocardial glycogen was lower and triacylglycerol was higher in CRD than in C and FRD rats. Although FRD rats had depressed myocardial-reducing power, no significant changes were observed in myocardial energy metabolism. Myocardial beta-hydroxyacyl coenzyme-A dehydrogenase and citrate synthase, as well as the enhanced lactate debydrogenase/citrate synthase ratio indicated that fatty acid degradation was decreased in CRD rats. Glycemic index was positively correlated with obesity-related cardiac effects.Conclusions: Isoenergetic carbohydrate-rich and fat-rich diets induced different degree of obesity and differently affected lipid profile. Carbohydrate-rich diet was deleterious relative to fat-rich diet in the heart enhancing lipoperoxidation and shifting the metabolic pathway for energy production. Glycemic index rather than dyslipidemic profile may predict the obesity effects on cardiac tissue. (C) 2007 Elsevier B.V. All rights reserved.

Immunization protected well nourished mice but not undernourished ones from lung injury in Methicillin-resistant Staphylococcus aureus (MRSA) infection

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nematódeos de ruminantes em pastagem com diferentes sistemas de pastejo com ovinos e bovinos

O objetivo deste trabalho foi avaliar os efeitos de diferentes sistemas de pastejo, com ovinos e bovinos, sobre a quantidade de larvas no estágio L3 de nematódeos de ruminantes. O delineamento experimental foi inteiramente ao acaso, em arranjo fatorial com quatro sistemas de pastejo e quatro períodos de rotação de pastagem. A duração do experimento foi de 91 dias, com sistema rotacionado (7 dias de ocupação e 21 de descanso), em 8 ha de Panicum maximum cv. Tanzânia. Foram avaliados os sistemas de pastejo: alternado, simultâneo e isolado, com ovinos e com bovinos. Foram utilizados 20 bovinos (mestiços), 30 cordeiros e 15 ovelhas adultas (raça Santa Inês). As amostras do capim, para recuperação e identificação dos nematódeos, foram realizadas semanalmente no pré e pós-pastejo dos piquetes. Na média geral de todos os manejos, a ordem decrescente de número de larvas foi: Haemonchus spp., Trichostrongylus spp., Oesophagostomum spp., Strongyloides spp. e Cooperia spp. Correlações médias foram encontradas entre as quantidades de larvas L3 no pré e pós-pastejo. Com o aumento do número de rotações, houve aumento no grau de contaminação da pastagem pelas larvas, independentemente do sistema adotado. O sistema de pastejo simultâneo foi o que apresentou maior controle da carga parasitária de Haemonchus spp. na pastagem de capim-tanzânia.

Gastrointestinal parasites in goats from Monte Castelo, Santa Catarina, Brazil

Este trabalho foi realizado com o objetivo de estimar o grau de infecção dos helmintos gastrintestinais em um rebanho caprino criado no Planalto Norte Catarinense. Foram utilizadas 12 fêmeas jovens e 11 adultas, das quais, a cada 28 dias, foram coletadas amostras de fezes diretamente do reto, totalizando 12 coletas, para quantificação de ovos por grama de fezes (OPG) e cultivo de larvas através de pool das amostras positivas do mesmo grupo. A contagem de OPG variou de zero a 10.400 nos animais jovens e de zero a 7.600 nos adultos. As médias do OPG entre as coletas foram de 583,3 a 4.441,7 no grupo jovem e de 418,2 a 2.181,8 nos adultos, sendo observados ovos da ordem Strongylida, dos gêneros Moniezia e Toxocara, bem como oocistos de coccídeos. Os animais mais jovens foram os mais acometidos, sendo o gênero Haemonchus o mais prevalente.

Effects of Natural Infestations of the Mite Varroa destructor on the Development of Africanized Honeybee Workers (Apis mellifera)

The mite Varroa destructor (Anderson & Treuman 2000) has caused extensive damage to beekeeping worldwide. In Brazil, weather conditions and the strains of bees do not provide ideal conditions for mite parasitism, which is reflected in the low number of deaths of colonies caused by varroatosis well as the stability of infestation levels. The aim of this study was to evaluate the damage caused by the mite infestation in hives maintained in natural conditions. For this purpose the number of mites per bee was calculated and used to quantify the level of infestation in each colony. To record the mortality rates of parasitized bees during development daily checks were performed. The data were analyzed by G test of independence and a Test of Proportions. The results indicate that the rate of mortality of pupae and larvae was proportional to the degree of infestation in each colony, and all colonies showed mortality rates significantly higher than the control rate. A significant interaction among death rates recorded between the third and fourth days of larval life and the total death of larvae was found (G Test = 50.22; P < 0.0001). So, it can be concluded that bee inbreeding contributed significantly to the increase of the larval rate of mortality. In Africanized honeybee colonies infested by the mite Varroa destructor mortality rates in conditions of natural infestation varied from 6.65 to 9.89% in pupae (<(x)over bar>= 8.78%) and from 6.13 to 13.48% in larvae ((x) over bar = 9.91%), against 3.85% and 3.74% in the control colony, respectively. Therefore, in the infested colonies the average rates of mortality caused by the harmful effects of the mite were, respectively, 2.28 times and 2.65 times greater in those two developmental stages.

Extreme degree of chromosome number variability in species of the spider genus Scytodes (Araneae, Haplogynae, Scytodidae)

Genus Scytodes includes most species of the spider family Scytodidae. Until now, 187 species of the genus have been described. In spite of this great diversity, only three Scytodes species were karyotyped so far. The present paper provides for the first time karyotype analysis of two synanthropic species, Scytodes fusca and Scytodes itapevi. Furthermore, new data on karyotype of Scytodes globula are also provided using conventional and differential cytogenetical procedures. The diploid number in the genus Scytodes varied considerably, namely from 2n = 13 to 2n = 31. The diploid number found in S. globula (2n male = 13) is the lowest in haplogyne spiders with monocentric chromosomes. Except S. globula, this number has been found only in one haplogyne spider with monocentric chromosomes, namely Ochyrocera sp. (Ochyroceratidae). on the contrary, the diploid number of S. fusca (2n male = 31) is one of the highest diploid numbers recorded in haplogyne spiders. The degree of intrageneric variation found in the genus Scytodes is the highest recorded in araneomorph spiders with monocentric chromosomes so far. Some karyotype characteristics (diploid number, chromosome morphology, total chromosome length, and distribution of constitutive heterochromatin) allowed us to postulate a close relationship between S. globula and S. itapevi. According to the karyotype data, S. fusca is not closely related to these two species. This conclusion corroborates a recent taxonomic work that grouped S. globula, S. itapevi, and other four Scytodes species in the 'globula group'.

Activity pattern of Cuniculus paca (Rodentia: Cuniculidae) in relation to lunar illumination and other abiotic variables in the southern Brazilian Amazon

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Short-Term Antiandrogen Flutamide Treatment Causes Structural Alterations in Somatic Cells Associated with Premature Detachment of Spermatids in the Testis of Pubertal and Adult Guinea Pigs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)