A Capability Maturity Model to Assess Supply Chain Performance

In an overcapacity world, where the customers can choose from many similar products to satisfy their needs, enterprises are looking for new approaches and tools that can help them not only to maintain, but also to increase their competitive edge. Innovation, flexibility, quality, and service excellence are required to, at the very least, survive the on-going transition that industry is experiencing from mass production to mass customization. In order to help these enterprises, this research develops a Supply Chain Capability Maturity Model named S(CM)2. The Supply Chain Capability Maturity Model is intended to model, analyze, and improve the supply chain management operations of an enterprise. The Supply Chain Capability Maturity Model provides a clear roadmap for enterprise improvement, covering multiple views and abstraction levels of the supply chain, and provides tools to aid the firm in making improvements. The principal research tool applied is the Delphi method, which systematically gathered the knowledge and experience of eighty eight experts in Mexico. The model is validated using a case study and interviews with experts in supply chain management. The resulting contribution is a holistic model of the supply chain integrating multiple perspectives, and providing a systematic procedure for the improvement of a company’s supply chain operations.

MEDIUM-CHAIN-LENGTH POLY(3-HYDROXYALKANOATE) NANOPARTICLE SUSPENSIONS

The main goal of this thesis was to prepare medium-chain-length poly-3-hydroxyalkanoate (mcl-PHA) nanoparticle suspensions at high solids content (≥ 10 % w/v). A two-stage emulsification-solvent evaporation process was employed to produce poly-3-hydroxydecanoate (PHD) suspensions. The formulation and processing conditions including ultrasonication time and amplitude, selection of solvent, and selection of surfactants and their concentrations were investigated to make concentrated suspensions (10 and 30 % (w/v)) of PHD with particles less than 300 nm. Among the ionic surfactants tested to stabilize the suspension, the anionic, sodium dodecyl sulphate (SDS), and the cationic, dodecyltrimethylammonium bromide (DTAB) surfactants produced the smallest particle sizes (~100 nm). However, more stabilized nanoparticles were obtained when the ionic surfactant, SDS, was combined with any of the non-ionic surfactants tested, with polyoxyethylene octyl phenyl ether (Triton X-100) or polyoxyethylene (20) sorbitan monooleate (Tween 80) resulting in a slight increase in zeta potential over 30 days while the zeta potential with other non-ionic surfactants decreased. Mcl-PHA containing 11 and 18 % of carboxyl groups was synthesized via free radical addition reaction of 11-mercaptoundecanoic acid to the pendant double bonds of unsaturated poly-3-hydroxynonanoate (PHNU). Colloidal suspensions prepared by ultrasonication needed a surfactant to maintain stability, even at 0.4 % solids of mcl-PHA containing 11 % carboxylation (PHNC-1) unlike the stable suspensions prepared without surfactants by the titration method. Similar particle sizes (155.6 ± 8.4 to 163.4 ± 11.3 nm) and polydispersity indices (0.42 ± 0.03 to 0.49 ± 0.04) were obtained when several non-ionic surfactants were tested to minimize particle agglomeration, with the smallest particles obtained with Triton X-100. When Triton X-100 was combined with a variety of ionic surfactants, smaller nanoparticles (97.1 ± 1.1 to 121.7 ± 5.7 nm) with a narrower particle size distribution (0.21 ± 0.001 to 0.25 ± 0.003) were produced. The SDS and Triton X-100 combination was chosen to evaluate other mcl-PHAs at 10 % (w/v) solids content. Slightly smaller nanoparticles were formed with carboxylated mcl-PHAs compared to mcl-PHAs having aliphatic pendant side chains. Mcl-PHA consisting of 18 % carboxylation (PHNC-2) formed a much smaller nanoparticles and higher zeta potential.

Supply Chain Resilience? Definition of concept and its formative elements.

The objective of this paper is to conceptualize Supply Chain Resilience (SCRes) and identify which supply chain capabilities can support the containment of disruptions and how these capabilities affect SCRes. Through a systematic and structured review of literature, this paper provides insights into the conceptualization and research methodological background of the SCM field. A total of one hundred and thirty four carefully selected refereed journal articles were systematically analyzed leading to the introduction of a novel definition for SCRes, which the authors view as the as “the ability to proactively plan and design the Supply Chain network for anticipating unexpected disruptive (negative) events, respond adaptively to disruptions while maintaining control over structure and function and transcending to a post-event robust state of operations, if possible, more favorable than the one prior to the event, thus gaining competitive advantage”. Finally, a critical examination of existing conceptual frameworks for understanding the relationships between the SCRes concept and its identified formative elements, is taking place.

Casting a Critical 'I' Over Caffrey's Irish Ale: Soft Words, Strongly Spoken

By employing a research approach, known as subjective personal introspection - the critical "I" - four co-researchers wrote extensive autobiographical essays on their responses to an advertisement for Caffrey's Irish Ale. By delving in the shamelessly subjective this paper draws out the main themes by comparing, contrasting and critiquing the introspective insights of these four critical "I's". In doing so, it demonstrates that there can be no grounded interpretations of an advertising text, that the critical "I" can yield uniquely illuminating insights, and that its chief power, as a research method, lies in its capacity for creativity, imagination and discovery.

Electron acoustic soliton energy of the Kadomtsev-Petviashvili equation in the Earth’s magnetotail region at critical ion density

The nonlinear properties of small amplitude electron-acoustic solitary waves (EAWs) in a homogeneous system of unmagnetized collisionless plasma consisted of a cold electron fluid and isothermal ions with two different temperatures obeying Boltzmann type distributions have been investigated. A reductive perturbation method was employed to obtain the Kadomstev-Petviashvili (KP) equation. At the critical ion density, the KP equation is not appropriate for describing the system. Hence, a new set of stretched coordinates
is considered to derive the modified KP equation. Moreover, the solitary solution, soliton energy and the associated electric field at the critical ion density were computed. The present investigation can be of relevance to the electrostatic solitary structures observed in various space plasma environments, such as Earth’s magnetotail region.

A low overhead error confinement method based on application statistical characteristics

Reliability has emerged as a critical design constraint especially in memories. Designers are going to great lengths to guarantee fault free operation of the underlying silicon by adopting redundancy-based techniques, which essentially try to detect and correct every single error. However, such techniques come at a cost of large area, power and performance overheads which making many researchers to doubt their efficiency especially for error resilient systems where 100% accuracy is not always required. In this paper, we present an alternative method focusing on the confinement of the resulting output error induced by any reliability issues. By focusing on memory faults, rather than correcting every single error the proposed method exploits the statistical characteristics of any target application and replaces any erroneous data with the best available estimate of that data. To realize the proposed method a RISC processor is augmented with custom instructions and special-purpose functional units. We apply the method on the proposed enhanced processor by studying the statistical characteristics of the various algorithms involved in a popular multimedia application. Our experimental results show that in contrast to state-of-the-art fault tolerance approaches, we are able to reduce runtime and area overhead by 71.3% and 83.3% respectively.

A New Method for Estimating the Moisture Content and Flexibility of Polymerised Bentonite Clay Mat

This paper presents a scientific development to address the current absence of a convenient technique to identify the ductile to brittle transition of bentonite clay mats. The instrumented indentation and 3-point bending tests were performed on different liquid polymer hydrated bentonite clay mats at varying moisture content. Properties measured include modified Brinell Hardness Number (BHN) and elastic structural stiffness (EI). The dependence of flexural stiffness on moisture content is demonstrated to conform to a best power function variation. The ductile to brittle transition of clay mat is affected primarily by the change in the moisture content and for the clay mat to remain flexible, critical moisture content of 1.7 times of its plastic limit is required. Results also indicate that a strong correlation between indentation hardness and the structural stiffness. The subsequent outcome in the development of a portable quality control device to monitor the acceptable moisture content level to ensure flexibility of the clay mats was also described in this paper.

A parallel method for solving pentadiagonal systems of linear equations

A new parallel approach for solving a pentadiagonal linear system is presented. The parallel partition method for this system and the TW parallel partition method on a chain of P processors are introduced and discussed. The result of this algorithm is a reduced pentadiagonal linear system of order P \Gamma 2 compared with a system of order 2P \Gamma 2 for the parallel partition method. More importantly the new method involves only half the number of communications startups than the parallel partition method (and other standard parallel methods) and hence is a far more efficient parallel algorithm.

A method to determine the impact of visual function on lesion detection performance

There are few professions in which visual acuity is as important as it is to radiologists. The diagnostic decision making process is composed of a number of events (detection or observation, interpretation and reporting), where the detection phase is subject to a number of physical and psychological phenomena that are critical to the process. Visual acuity is one phenomenon that has often been overlooked, and there is very little research assessing the impact of reduced visual acuity on diagnostic performance. The aim of this study was to investigate the impact of reduced visual acuity on an observer’s ability to detect simulated nodules in an anthropomorphic chest phantom.

A finite-volume shallow layer method for the MHD instabilities in an aluminium production cell

An electrolytic cell for Aluminium production contains molten metal and molten electrolyte, which are subject to high dc-currents and magnetic fields. Lorentz forces arising from the cross product of current and magnetic field may amplify natural gravity waves at the interface between the two fluids, leading to short circuits in extreme cases. The external magnetic field and current distribution in the production cell is computed through a detailed finite element analysis at Torino Polytechnic. The results are then used to compute the magnetohydrodynamic and thermal effects in the aluminium/electrolyte bath. Each cell has lateral dimensions of 6m x 2m, whilst the bath depth is only 30cm. the electrically resistive electrolyte path, which is critical in the operation of the cell, has layer depth of only a few centimetres below each carbon anode. Because the shallow dimensions of the liquid layer a finite-volume shallow-layer technique has been used at Greenwich to compute the resulting flow-field and interface perturbations. The information obtained from this method, i.e. depth averaged velocities and aluminium/electrolyte interface position is then embedded in the three-dimensional finite volume code PHYSICA and will be used to compute the heat transfer and phase change in the cell.

Determination of soybean cultivar resistance to soybean cyst nematode with quantitative polymerase chain reaction

Heterodera glycines, the soybean cyst nematode, is the major pathogen of Glycine max (soybean). Effective management of this pathogen is contingent on the use of resistant cultivars, thus screening for resistant cultivars is essential. The purpose of this research was to develop a method to assess infection of soybean roots by H. glycines with real-time quantitative Polymerase Chain Reaction (qPCR), a prelude to differentiation of resistance levels in soybean cultivars. Two experiments were conducted. In the first one, a consistent inoculation method was developed using to provide active second-stage juveniles (J2). Two-day-old soybean roots were infested with 0 and 1000 J2/mL. Twenty-four hours after infestation, the roots were surface sterilized and DNA was extracted with the DNA FastKit (MP Biomedicals, Santa Ana, CA)). For the qPCR assay, primer pair for single copy gene HgSNO, which codes for a protein involved in the production of vitamin B6, was selected for H. glycines DNA amplification within soybean roots. In the second experiment, compatible Lee 74, incompatible Peking and cultivars with different levels of resistance to H. glycines were inoculated with 0 and 1,000 J2/seedlings. Twenty-four hours post inoculation they were transplanted into pasteurized soil. Subsequently they were harvested at 1, 7, 10, 14 and 21 days post inoculation for DNA extraction. With the qPCR assay, the time needed to differentiate highly resistant cultivars from the rest was reduced. Quantification of H. glycines infection by traditional means (numbers of females produced in 30 days) is a time-consuming practice; the qPCR method can replace the traditional one and improve precision in determining infection levels.

Running on Rooftops: a novel and critical reflection on writing from an identity of expatriation with an examination of West-meets-East encounters and attitudes depicted in literature

This thesis is in two parts: a creative work of fiction and a critical reflection on writing from an identity of expatriation. The creative work, a novel entitled Running on Rooftops, revolves around a fictitious community of expatriates living and working in China. As a new college graduate, Anne Henry, the novel’s protagonist and narrator, decides to spend a year teaching English in China. Twelve years later, though still unsure of how to make sense of the chain of events and encounters that left her with an X-shaped scar on her knee, she nevertheless tells the story, revealing how “just a year” can be anything but. The critical reflection, entitled Writing on Rooftops, explores the nature of expatriation as it relates to identity and writing, specifically in how West-meets-East encounters and attitudes are depicted in literature. In it, I examine the challenges and benefits of writing from an identity and mindset of expatriation as illustrated in the works of Western writers who themselves experienced and wrote from viewpoints of expatriation, particularly those Western writers who wrote of expatriation in China and Southeast Asia. The primary question addressed is how expatriation influences perception and how those perceptions among Western foreigners in China and Southeast Asia have been and can be reflected in literature. In the end, I argue that expatriation can be a valuable viewpoint to write from, offering new ways of seeing and describing our world, ourselves and the connections between the two.

The D(D-3)-anyon chain: integrable boundary conditions and excitation spectra

Chains of interacting non-Abelian anyons with local interactions invariant under the action of the Drinfeld double of the dihedral group D-3 are constructed. Formulated as a spin chain the Hamiltonians are generated from commuting transfer matrices of an integrable vertex model for periodic and braided as well as open boundaries. A different anyonic model with the same local Hamiltonian is obtained within the fusion path formulation. This model is shown to be related to an integrable fusion interaction round the face model. Bulk and surface properties of the anyon chain are computed from the Bethe equations for the spin chain. The low-energy effective theories and operator content of the models (in both the spin chain and fusion path formulation) are identified from analytical and numerical studies of the finite-size spectra. For all boundary conditions considered the continuum theory is found to be a product of two conformal field theories. Depending on the coupling constants the factors can be a Z(4) parafermion or a M-(5,M-6) minimal model.

From physics to metaphysics: philosophy and style in the critical writings of T. S. Eliot (1913-1935)

This thesis considers Eliot's critical writing from the late 1910s till the mid-1930s, in the light of his PhD thesis - Knowledge and Experience in the Philosophy of F. H. Bradley - and a range of unpublished material: T S. Eliot's Philosophical Essays and Notes (1913- 4) in the Hayward Bequest (King's College, Cambridge University); T. S. Eliot's Family Papers in the T. S. Eliot Collection at the Houghton Library (Harvard University); and items from the Harvard University Archives at the Pusey Library. 'Me thesis offers a comprehensive view of Eliot's critical development throughout this important period. It starts by considering The Sacred Wood's ambivalence towards the metaphysical philosophy of F. H. Bradley and Eliot's apparent adoption of a scientific method, under the influence of Bertrand Russell. It will be argued that Eliot uses rhetorical strategies which simultaneously subvert the method he is propounding, and which set the tone for an assessment of his criticism throughout the 1920s. His indecision, in this period, about the label 'Metaphysical' for some poets of the seventeenth century, reveals the persistence of the philosophical thought he apparently rejects in 1916, when he chooses not to pursue a career in philosophy in Harvard. This rhetorical tactic achieves its fulfilment in Dante (1929), where Eliot finds a model in the medieval allegorical method and 'philosophical' poetry. Allegory is also examined in connection with the evaluation of Eliot's critical writings themselves to determine, for instance, the figurative dimension of his early scientific vocabulary and uncover metaphysical residues he had explicitly disowned but would later embrace. Finally, it is suggested that, the hermeneutics of allegory are historical and it is used here to test the relationship between Eliot's early and later critical writings, that is the early physics and the later metaphysics.