Biotransformation of poly (epsilon-caprolactone) and poly (vinyl chloride) blend

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental lamellar keratoplasty in rabbits using microfibrilar cellulose membrane: clinical, morphological and immunohistochemical findings

Avaliaram-se aspectos clínicos, histopatógicos e imunoistoquímicos da córnes de coelhos da raça Nova Zelândia adultos e machos em ceratoplastias lamelares com membrana de celulose microfibrilar. Trinta animais distribuídos em cinco grupos (n=6) foram estudados por até 60 dias de pós-operatório. A avaliação clínica revelou manifestações moderadas de edema, blefaroespasmo e fotofobia ao segundo dia, evoluindo para formas discretas ou ausentes a partir do sétimo dia, período em que se observou, clinicamente, reparo do defeito corneal. A histopatologia revelou uma fina camada de células escamosas, recobrindo a área lesada já aos sete dias, com discreto infiltrado de células polimorfonucleares. Observaram-se vasos no epitélio a partir do 15o dia, com regressão ao 48o dia. A marcação com o anticorpo Ki67 mostrou aumento de células em proliferação aos 15 dias no epitélio e aos 30 dias no estroma. Nesse período, ocorreram remodelamento e adesão epitealial. Considerando a boa integração do implante, admite-se a membrana de celulose como um bom material a ser utilizado em ceratoplastia lamellar.

Composição química do capim-elefante cv. Roxo cortado em diferentes alturas

O objetivo deste trabalho foi verificar o efeito dos cortes efetuados a 0, 15, 30 e 45 cm sobre a composição química do capim-elefante (Pennisetum purpureum, Schum.) cv. Roxo, em épocas seca e chuvosa. As amostras foram obtidas de uma área útil de 8,4 m² de cada parcela. Após o corte de uniformização, efetuaram-se dois cortes no período seco, em intervalos de 90 dias, e três no período chuvoso, em intervalos de 60 dias. de cada parcela foi tomada uma amostra de 3 a 5 perfilhos, desidratada em estufa e triturada para analises laboratoriais. Foram avaliados os percentuais de matéria seca (MS), proteína bruta (PB), fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), celulose (CEL), hemicelulose (HCEL), lignina (LIG) e cinzas. As alturas de corte não influenciaram a composição química da forrageira, nem houve interação com as épocas. Com exceção de hemicelulose e cinzas, os cortes na época seca mostraram resultados superiores à chuvosa. As médias nas duas épocas foram 19,70 e 17,44% para MS; 7,74 e 7,25% para PB; 76,41 e 71,13% para FDN; 42,75 e 41,02% para FDA; 31,44 e 30,43% para CEL; 30,66 e 30,28% para HCEL; 9,25 e 7,83% para LIG; e 1,97 e 3,38% para cinzas, nos períodos seco e chuvoso, respectivamente.

Composição química e digestibilidade de fenos tratados com amônia anidra ou uréia

O experimento foi conduzido para se avaliarem as alterações na composição química e na digestibilidade in vitro da matéria seca (DIVMS) dos fenos de Brachiaria decumbens Stapf, Brachiaria brizantha (Hochst ex. A. Rich) Stapf e jaraguá (Hyparrhenia rufa Ness Stapf), colhidos no estádio de maturação das sementes e tratados com amônia anidra (3,0% MS) ou uréia (5,4% MS). A análise dos dados demonstra que a amonização diminuiu os conteúdos de FDN e hemicelulose com a mesma eficiência. Os tratamentos químicos não alteraram os teores de FDA, celulose e lignina. Observou-se aumento nos teores de compostos nitrogenados, como N total e N insolúvel em detergente ácido (NIDA) em resposta à amonização. A relação NIDA/NT diminuiu com a amonização, aumentando a quantidade de N disponível para a digestão. A DIVMS aumentou em resposta às alterações observadas na composição química da fração fibrosa e incremento no conteúdo de N prontamente digestível dos fenos tratados.

Avaliação de fontes de amônia para o tratamento de fenos de gramíneas tropicais. 1. Constituintes da parede celular, poder tampão e atividade ureática

Avaliaram-se as alterações da fração fibrosa e as características químicas dos fenos de braquiária decumbens (Brachiaria decumbnes Stapf) e jaraguá (Hyparrhenia rufa Ness Stapf) não-tratados, tratados com uréia (U-5,4% da MS), uréia (UL-5,4% da MS) mais labe-labe (Lablab purpureus L. Sweet, cv. Highworth-3,0% da MS) ou amônia anidra (NH3 -3,0% da MS). O tratamento químico com uréia ou NH3 aumentou o pH e a digestibilidade in vitro verdadeira dos fenos. A amonização não alterou os teores de fibra em detergente ácido e celulose, mas diminuiu os de fibra em detergente neutro, hemicelulose e lignina. O uso do labe-labe como fonte adicional de urease não aumentou a eficiência da uréia no tratamento dos volumosos. As avaliações do conteúdo de umidade, do poder tampão e da atividade ureática são técnicas que podem auxiliar na previsão das respostas dos volumosos à amonização com o uso de uréia.

Inoculante enzimático-bacteriano, composição química e parâmetros fermentativos das silagens dos capins Tanzânia e Mombaça

Objetivou-se, com o presente trabalho, avaliar os efeitos de idades de colheita e do uso de inoculante enzimático-bacteriano sobre os parâmetros de fermentação, de composição química e digestibilidade in vitro da matéria seca (DIVMS) das silagens dos cultivares Tanzânia e Mombaça (Panicum maximum Jacq.). As forragens foram colhidas aos 45 e 60 dias após o corte de uniformização, submetidas a dois tratamentos (A - Ensilagem sem aditivo [Controle]; B - Ensilagem com adição de inoculante enzimático-bacteriano) e distribuídas em um delineamento inteiramente casualizado em esquema fatorial (dois capins x duas inoculações x duas idades de corte), com três repetições. O conteúdo de MS das silagens confeccionadas com as plantas colhidas aos 60 dias de rebrota foi superior àquele das silagens colhidas com 45 dias. As silagens confeccionadas com as plantas colhidas aos 45 dias de rebrota apresentaram os maiores teores de PB (11,9%). Não se observaram efeitos das silagens, dos tratamentos e das idades de corte sobre os teores de hemicelulose, celulose e DIVMS e valores de pH e N-NH3. As silagens do capim-tanzânia apresentaram os maiores teores de MS, FDN, FDA, ácido lático e ácido butírico, enquanto as de capim-mombaça, os de PB e de ácido acético. A adição de inoculante enzimático-bateriano promoveu silagens com menores teores de MS, PB e lignina que as não-tratadas. Os capins tanzânia e mombaça não apresentaram limitações ao processo de ensilagem. O inoculante enzimático-bacteriano não melhorou as características qualitativas, fermentativas e nutricionais das silagens avaliadas.

Efeitos da amonização sobre a ocorrência de fungos, composição química e digestibilidade in vitro de fenos de grama Seda (Cynodon dactylon (L.) Pers.)

The experiment was conducted with grama seda (Cynodon dactylon (L.) Pers.) hays stored with a low moisture content (12-15%) and without chemical treatment, and hays stored with a high moisture content (20-25%) and treated with anhydrous ammonia (NH3) al 0.5 and 1.0% of DM, and urea at 0.9 and 1.8% of DM. At 65 days after treatment (AT) under a plastic cover, the bales were opened and samples were taken at 3, 15 and 30 days to determine the chemical composition and in vitro digestibility (IVDMD) of the hays. For the identification of fungi, samples were taken at 0, 15 and 30 days AT. The data were analyzed according to a split-plot design with the effects of the chemical treatments studied in the main plot and the effects of the periods of post-treatment studied in the sub-plots, Fourteen genera of fungi were observed in the hays, not treated and treated with NH3 and urea, with a higher occurrence of Cladosporium, Curvularia, Aspergillus, and Penicillium. Treatment with anhydrous ammonia and 1.8% urea controlled the occurrence of Aspergillus; however, Penicillium decreased in hays treated with ammonia 30 days AT. Ammoniation did not influence the contents of ADF, cellulose and lignin in the hays, but NDF and hemicellulose decreased with the use of ammonia 30 days AT. The CP contents and the IVDMD increased with ammoniation. The CP contents decreased in hays treated with NH3 as days AT increase, while hays treated with urea did not change.

Xylanases from fungi: properties and industrial applications

Xylan is the principal type of hemicellulose. It is a linear polymer of beta-D-xylopyranosyl units linked by (1-4) glycosidic bonds. In nature, the polysaccharide backbone may be added to 4-O-methyl-alpha-D-glucuronopyranosyl units, acetyl groups, alpha-L-arabinofuranosyl, etc., in variable proportions. An enzymatic complex is responsible for the hydrolysis of xylan, but the main enzymes involved are endo-1,4-beta-xylanase and beta-xylosidase. These enzymes are produced by fungi, bacteria, yeast, marine algae, protozoans, snails, crustaceans, insect, seeds, etc., but the principal commercial source is filamentous fungi. Recently, there has been much industrial interest in xylan and its hydrolytic enzymatic complex, as a supplement in animal feed, for the manufacture of bread, food and drinks, textiles, bleaching of cellulose pulp, ethanol and xylitol production. This review describes some properties of xylan and its metabolism, as well as the biochemical properties of xylanases and their commercial applications.

Effect of temperature on the interaction between the nonionic surfactant C(12)E(5) and poly(ethylene oxide) investigated by dynamic light scattering and fluorescence methods

The interaction between the nonionic surfactant C(12)E(5) and a high molar mass (M = 5.94 x 10(5)) poly(ethylene oxide) (PEG) in aqueous solution has been examined as a function of temperature by dynamic light scattering and fluorescence methods over a broad concentration range. Clusters of small surfactant micelles form within the PEO coil, leading to its extension. The hydrodynamic radius of the complex increases strongly with temperature as well as with the concentrations of surfactant and polymer. At high concentrations of the surfactant, the coil/micellar cluster complex coexists with free C(12)E(5) micelles in the solution. Fluorescence quenching measurements show a moderate micellar growth from 155 to 203 monomers in PEO-free solutions of C(12)E(5) over a wide concentration range (0.02-2.5%) at 8 degrees C. Below 0.25% C(12)E(5), the average aggregation number (N) of the micelles is smaller in the presence of PEO than in its absence. However, N increases with increasing surfactant concentration up to a plateau value of about 270 at about 1.2% (ca. 30 mM) C(12)E(5). At high surfactant concentrations, N is larger in the presence of polymer than in its absence, a finding which is connected to a significant lowering of the clouding temperature due to the PEO at these compositions. Similar results of increasing aggregation number followed by a plateau were also found at a fixed concentration of surfactant (2.5%) and varied PEO.

Planar and UV written channel optical waveguides prepared with siloxane poly(oxyethylene)-zirconia organic-inorganic hybrids. Structure and optical properties

Organic-inorganic hybrids were prepared using ureapropyltriethoxysilane, methacryloxypropyltrimethoxysilane and acrylic acid modified zirconium(IV) n-propoxide precursors and were characterized by small angle X-ray scattering, X-ray diffraction and photoluminescence spectroscopy. The results indicate an effective interaction between the zirconium-based nanoparticles and the siliceous nanodomains that induces changes in the hybrids' emission features. Planar waveguides were obtained by spin-coating of the prepared sols on sodalime and silica substrates. Refractive index, thickness, number of propagating modes, and attenuation coefficient were measured at 543.5, 632.8 and 1550 nm by the prism coupling technique. The synergism between the two hybrid precursors resulted in monomode planar waveguides with low losses in the infrared ( from 0.6-1.1 dB cm(-1)) which also support a number of propagating modes in the visible ( losses from 0.4-1.5 dB cm(-1)). Channel waveguides were also obtained by UV photopatterning using amplitude or phase masks and propagating modes were observed at 1550 nm.

Electroactive LbL films of metallic phthalocyanines and poly(O-methoxyaniline) for sensing

Multilayered nanostructured films have been widely investigated for electrochemical applications as modified electrodes, including the layer-by-layer (LbL) films where properties such as thickness and film architecture can be controlled at the molecular level. In this study, we investigate the electrochemical features of LbL films of poly (o-methoxyaniline; POMA) and tetrasulfonated phthalocyanines containing nickel (NiTsPc) or copper (CuTsPc). The films displayed well-defined electroactivity, with redox pairs at 156 and 347 mV vs SCE, characteristic of POMA, which allowed their use as modified electrodes for detecting dopamine and ascorbic acid at concentrations as low as 10(-5) M.

Cathodic stripping voltammetric determination of ceftazidime with reactive accumulation at a poly-L-lysine modified hanging mercury drop electrode

Ceftazidime is hydrolysed only slowly at pH 10 at room temperature. This is indicated by a small cathodic stripping voltammetric peak obtained at pH 10 at a hanging mercury drop electrode at about -0.6 V which corresponds to the reduction of the hydrolysis product. This peak is enhanced more than tenfold by the addition of poly-L-lysine (PLL) to the electrolyte solution. The optimum accumulation potential is between 0 and -0.1 V: the size of the peak decreases steadily, however, as the accumulation potential is moved to more negative potentials and is about one-sixth the size for accumulation at -0.4 V. Existing knowledge of the organic chemistry of cephalosporins indicates that the accumulation must involve an aminolysis reaction of the unprotonated PLL with the beta-lactam ring of the ceftazidime. The limit of detection (3 sigma) in standard solutions was calculated to be 1 x 10(-10) mol l(-1). The detection limit in buffer solution containing 1% of urine was calculated to be 5 x 10(-9) mol l(-1), i.e. 5 x 10(-6) mol l(-1) in the urine. (C) 1999 Elsevier B.V. B.V. AU rights reserved.

Characterization of methylcellulose produced from sugar cane bagasse cellulose: Crystallinity and thermal properties

In the present work, methylcellulose produced from sugar cane bagasse was characterized by FTIR, WAXD, DTA and TGA techniques. Two samples were synthesized: methylcellulose A and rnethylcellulose B. The only difference in the process was the addition of fresh reactants during the preparation of methylcellulose B. The ratio between the absorption intensities of the C-H stretching band at around 2900 cm(-1) and C-H stretching at around 3400 cm(-1) for methylcellulose B is higher than for methylcellulose A, indicating that methylcellulose B showed an increase in the degree of substitution (DS). Methylcellulose A presents a more heterogeneous structure, which is similar to the original cellulose as seen through FTIR and DTA. Methylcellulose B showed thermal properties similar to commercial methylcellulose. The modification of rnethylcellulose preparation method allows the production of a material with higher DS, crystallinity and thermal stability in relation to the original cellulose and to methylcellulose A. (c) 2006 Elsevier Ltd. All rights reserved.