Caracterização hidráulica, hidrológica e do transporte sólido das principais linhas de água (ribeiras) do concelho de Câmara de Lobos: ilha da Madeira

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Hidráulica

Melhoria e automação de linhas de montagem

Hoje em dia, e com os avanços tecnológicos a surgirem de forma constante, existem novas áreas que têm de ser consideradas com um foco importante por parte de todas as organizações, sendo uma delas a robótica industrial. Motivada em aumentar o seu output, as condições de trabalho para os seus colaboradores, bem como todas as condições de organização da logística interna, a Grohe Portugal, mais especificamente o departamento da montagem, achou relevante fazer um estudo de métodos e tempos, calculando os ganhos potenciais de aumento de output com introdução de robótica nas linhas dos cartuchos. Os objetivos principais seriam então, fazer uma restruturação de todo o layout dessas linhas, tendo como foco automatizar alguma(s) operação(ões), conseguindo assim uma melhoria significativa do output dessas linhas com o menor payback possível. Posto isto, esta dissertação pretende apresentar o trabalho desenvolvido junto da Grohe Portugal, que teve como objetivo fazer os estudos e a automatização de linhas de montagem de cartuchos, bem como melhorar algumas linhas de montagem tendo em conta fatores ergonómicos. Relativamente à automatização da linha dos cartuchos, foi importante estudar todos os seguintes aspetos:  utilização de unidades robóticas;  ergonomia;  ganhos de produtividade;  automatizar ou semi-automatizar operações;  simplificar processos de montagem;  simplificar setups;  solicitar orçamentos;  elaborar caderno de encargos. Para a realização deste projeto, o trabalho desenvolvido foi decomposto em várias etapas, entre as quais se destacam:  análise e estudo dos métodos e sequências de montagem;  levantamento de todos os componentes e operações de montagem até à obtenção do cartucho final;  estudo de tempos de todas essas operações de montagem;  caraterização de um novo layout para as linhas com a introdução de unidades robóticas, tanto quanto possível, mais adequadas;  elaboração de caderno de encargos para ser enviado a empresas, para estas poderem apresentar uma orçamentação, bem como indicar as unidades robóticas mais adequadas para as tarefas pretendidas;  automatização da linha dos cartuchos. Relativamente ao projeto de novas linhas de montagem tendo em conta fatores ergonómicos, de forma a melhorar os sistemas de abastecimento e as condições de trabalho por parte dos operadores, foram postos em prática diferentes passos, nomeadamente:  identificação de todos os processos de montagem realizados pelos operadores na linha a melhorar;  estudo e definição da disposição dos componentes na nova linha, bem como a sua forma de abastecimento;  projeto da nova linha de montagem em 3D com recurso ao software SolidWorks;  realização prática da linha, acompanhando e ajudando a equipa da ferramentaria. O balanço final do trabalho foi bastante positivo, tanto na automatização das linhas de montagem dos cartuchos, em que todo o seu estudo foi alcançado com sucesso, como no melhoramento ergonómico das linhas de montagem, tendo-se alcançado melhorias em alguns índices de qualidade, tempos de abastecimento, organização das linhas, e nas condições de iluminação, resultando essas melhorias numa avaliação positiva por parte dos colaboradores que nelas trabalham todos os dias.

Overstock and stock-out in Volkswagen Autoeuropa

The following work is a case study of overstock and stock-out problems at Volkswagen Autoeuropa (VWAE). It introduces the supply chain of Autoeuropa and specializes then on failures connected to inventory problems. Having a successful supply chain is important in a world where products become more and more similar as it can give to companies an edge over their competitors. The case shows three practices that VWAE uses to prevent and to overcome stock problems. Information was gathered by doing interviews with different managers, by analyzing the company’s key processes and by literature research related to the topics of supply chain management and flexibility in the supply chain. Three practices were further investigated: the use of alternative parts, support of the supplier and a rating system of suppliers. In the question section of this work the importance of flexibility and Supplier Relationship Management (SRM) when connected to supply chain management are explained. The described different practices are numerically analyzed and it is concluded that each practice brings both cost savings and the possibility of achieving target numbers to the company, showing the company’s flexibility to react to supply chain disturbances. Because of confidentiality reasons, persons in the case are fictionalized and numbers are wherever possible equalized to 100 in order to display true proportions.

Breaking Down and Breaking Out: Beckett’s ‘Absolute Liminality’ in the Third Age of Capitalist Traumas

Fundação para a Ciência e a Tecnologia (FCT), Fundação Millennium bcp

Quantitative and qualitative research on brief systemic therapies carried out within the framework of an ambulatory consultation for couples and families

Abstract: This article presents both a brief systemic intervention method (IBS) consisting in 6 sessions developed in an ambulatory service for couples and families, and two research projects done in collaboration with the Institute for Psychotherapy of the University of Lausanne. The first project is quantitative and it aims at evaluating the effectiveness of ISB. One of its main feature is that outcomes are assessed at different levels of individual and family functioning: 1) symptoms and individual functioning; 2) quality of marital relationship; 3) parental and co-parental relationships; 4) familial relationships. The second project is a qualitative case study about a marital therapy which identifies and analyses significant moments of the therapeutic process from the patients' perspective. Methodology was largely inspired by Daniel Stem's work about "moments of meeting" in psychotherapy. Results show that patients' theories about relationship and change are important elements that deepen our understanding of the change process in couple and family therapy. The interest of associating clinicians and researchers for the development and validation of a new clinical model is discussed.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

The implications of being an international medical graduate (IMG) in Canadian society : a qualitative study of foreign-trained physicians' resettlement, sense of identity and health status

This qualitative research study used grounded theory methodology to explore the settlement experiences and changes in professional identity, self esteem and health status of foreign-trained physicians (FTPs) who resettled in Canada and were not able to practice their profession. Seventeen foreign-trained physicians completed a pre-survey and rated their health status, quality of life, self esteem and stress before and after coming to Canada. They also rated changes in their experiences of violence and trauma, inclusion and belonging, and racism and discrimination. Eight FTPs from the survey sample were interviewed in semi-structured qualitative interviews to explore their experiences with the loss of their professional medical identities and attempts to regain them during resettlement. This study found that without their medical license and identity, this group of FTPs could not fully restore their professional, social, and economic status and this affected their self esteem and health status. The core theme of the loss of professional identity and attempts to regain it while being underemployed were connected with the multifaceted challenges of resettlement which created experiences of lowered selfesteem, and increased stress, anxiety and depression. They identified the re-licensing process (cost, time, energy, few residency positions, and low success rate) as the major barrier to a full and successful settlement and re-establishment of their identities. Grounded research was used to develop General Resettlement Process Model and a Physician Re-licensing Model outlining the tasks and steps for the successfiil general resettlement of all newcomers to Canada with additional process steps to be accomplished by foreign-trained physicians. Maslow's Theory of Needs was expanded to include the re-establishment of professional identity for this group to re-establish levels of safety, security, belonging, self-esteem and self-actualization. Foreign-trained physicians had established prior professional medical identities, self-esteem, recognition, social status, purpose and meaning and bring needed human capital and skills to Canada. However, without identifying and addressing the barriers to their full inclusion in Canadian society, the health of this population may deteriorate and the health system of the host country may miss out on their needed contributions.

Nietzsche's will-to-power ontology : an interpretation of Beyond Good and Evil

Abstract: Nietzsche's Will-to-Power Ontology: An Interpretation of Beyond Good and Evil § 36 By: Mark Minuk Will-to-power is the central component of Nietzsche's philosophy, and passage 36 of Beyond Good and Evil is essential to coming to an understanding of it. 1 argue for and defend the thesis that will-to-power constitutes Nietzsche's ontology, and offer a new understanding of what that means. Nietzsche's ontology can be talked about as though it were a traditional substance ontology (i.e., a world made up of forces; a duality of conflicting forces described as 'towards which' and 'away from which'). However, 1 argue that what defines this ontology is an understanding of valuation as ontologically fundamental—^the basis of interpretation, and from which a substance ontology emerges. In the second chapter, I explain Nietzsche's ontology, as reflected in this passage, through a discussion of Heidegger's two ontological categories in Being and Time (readiness-to-hand, and present-at-hand). In a nutshell, it means that the world of our desires and passions (the most basic of which is for power) is ontologically more fundamental than the material world, or any other interpretation, which is to say, the material world emerges out of a world of our desires and passions. In the first chapter, I address the problematic form of the passage reflected in the first sentence. The passage is in a hypothetical style makes no claim to positive knowledge or truth, and, superficially, looks like Schopenhaurian position for the metaphysics of the will, which Nietzsche rejects. 1 argue that the hypothetical form of the passage is a matter of style, namely, the style of a free-spirit for whom the question of truth is reframed as a question of values. In the third and final chapter, 1 address the charge that Nietzsche's interpretation is a conscious anthropomorphic projection. 1 suggest that the charge rests on a distinction (between nature and man) that Nietzsche rejects. I also address the problem of the causality of the will for Nietzsche, by suggesting that an alternative, perspectival form of causality is possible.

Preliminary epidemiological study of latent tuberculosis in Mexican agricultural workers in the Niagara region, Canada

It is well documented that the majority of Tuberculosis (TB) cases diagnosed in Canada are related to foreign-bom persons from TB high-burden countries. The Canadian seasonal agricultural workers program (SAWP) operating with Mexico allows migrant workers to enter the country with a temporary work permit for up to 8 months. Preiimnigration screening of these workers by both clinical examination and chest X-ray (CXR) reduces the risk of introducing cases of active pulmonary TB to Canada, but screening for latent TB (LTBI) is not routinely done. Studies carried out in industrialized nations with high immigration from TBendemic countries provide data of lifetime LTBI reactivation of around 10% but little is known about reactivation rates within TB-endemic countries where new infections (or reinfections) may be impossible to distinguish from reactivation. Migrant populations like the SAWP workers who spend considerable amounts of time in both Canada and TBendemic rural areas in Mexico are a unique population in terms of TB epidemiology. However, to our knowledge no studies have been undertaken to explore either the existence of LTBI among Mexican workers, the probability of reactivation or the workers' exposure to TB cases while back in their communities before returning the following season. Being aware of their LTBI status may help workers to exercise healthy behaviours to avoid TB reactivation and therefore continue to access the SAWP. In order to assess the prevalence of LTBI and associated risk factors among Mexican migrant workers a preliminary cross sectional study was designed to involve a convenience sample of the Niagara Region's Mexican workers in 2007. Research ethics clearance was granted by Brock University. Individual questionnaires were administered to collect socio-demographic and TB-related epidemiological data as well as TB knowledge and awareness levels. Cellular immunity to M tuberculosis was assessed by both an Interferon-y release assay (lGRA), QuantiFERON -TB Gold In-Tube (QFf™) and by the tuberculin skin test (TSn using Mantoux. A total of 82 Mexican workers (out of 125 invited) completed the study. Most participants were male (80%) and their age ranged from 22 to 65 years (mean 38.5). The prevalence of LTBI was 34% using TST and 18% using QFTTM. As previously reported, TST (using ~lOmm cut-off) showed a sensitivity of 93.3% and a specificity of 79.1 %. These findings at the moment cannot predict the probability of progression to active TB; only longitudinal cohort studies of this population can ascertain this outcome. However, based on recent publications, lORA positive individuals may have up to 14% probability of reactivation within the next two years. Although according to the SA WP guidelines, all workers undergo TB screening before entering or re-entering Canada, CXR examination requirements showed to be inconsistent for this population: whereas 100% of the workers coming to Canada for the first time reported having the procedure done, only 31 % of returning participants reported having had a CXR in the past year. None of the participants reported ever having a CXR compatible with TB which was consistent with the fact that none had ever been diagnosed with active pulmonary TB and with only 3.6% reporting close contact with a person with active TB in their lifetime. Although Mexico reports that 99% of popUlation is fully immunized against TB within the first year of age, only 85.3% of participants reported receiving BOC vaccine in childhood. Conversely, even when TST is not part of the routine TB screening in endemic countries, a suqDrisingly high 25.6% reported receiving a TST in the past. In regards to TB knowledge and awareness, 74% of the studied population had previous knowledge about (active) TB, 42% correctly identified active TB symptomatology, 4.8% identified the correct route of transmission, 4.8% knew about the existence of LTBI, 3.6% knew that latent TB could reactivate and 48% recognized TB as treatable and curable. Of all variables explored as potential risk factors for LTBI, age was the only one which showed statistical significance. Significant associations could not be proven for other known variables (such as sex, TB contact, history of TB) probably because of the small sample size and the homogeneity of the sample. Screening for LTBI by TST (high sensitivity) followed by confirmation with QFT''"'^ (high specificity) suggests to be a good strategy especially for immigrants from TB high-burden countries. After educational sessions, workers positive for LTBI gained greater knowledge about the signs and symptoms of TB reactivation as well as the risk factors commonly associated with reactivation. Additionally, they were more likely to attend their annual health check up and request a CXR exam to monitor for TB reactivation.

An empirical study of in-school and out-of-school day care

The purpose of this study was to determine if there were differences between in-school and out-of-school day care centres. Five centres housed in public schools and five housed in other locations were selected for the research. Aquality assessment was administered in each centre which examined the following components - physical environment, adult social structure and socia-emotional environment, children's socia-emotional environment, cognitive stimulation program and toys and equipment. Quantitative analysis using simple t-tests showed a significant difference between in-school and out-of-school day cares for the physical environment variable. Differences approached significance for the children's socia-emotional environment variable as well as overall quality. Qualitative analysis using a triangulated methodology revealed noticeable differences for every variable. The researcher concluded that both the quality of the physical environment and the capabilities of the administrators strongly influence the quality of the day care environment. This study also included an assessment of children's attitude toward learning. No significant difference was found between in-school and out-of-school centres.