Understanding Complete Oxidation of Methane on Spinel Oxides at Molecular Level

It is crucial to develop a catalyst made of earth-abundant elements highly active for a complete oxidation of methane at a relatively low temperature. NiCo₂O₄ consisting of earth-abundant elements which can completely oxidize methane in the temperature range of 350-550 °C. Being a cost-effective catalyst, NiCo₂O₄ exhibits activity higher than precious-metal-based catalysts. Here we report that the higher catalytic activity at the relatively low temperature results from the integration of nickel cations, cobalt cations and surface lattice oxygen atoms/oxygen vacancies at the atomic scale. In situ studies of complete oxidation of methane on NiCo₂O₄ and theoretical simulations show that methane dissociates to methyl on nickel cations and then couple with surface lattice oxygen atoms to form -CH₃O with a following dehydrogenation to -CH₂O; a following oxidative dehydrogenation forms CHO; CHO is transformed to product molecules through two different sub-pathways including dehydrogenation of OCHO and CO oxidation.

Poly(vinyl alcohol) with sulfonic acid groups as catalyst for the alpha-pinene alkoxylation

The alkoxylation of a-pinene was carried out over poly(vinyl alcohol) containing sulfonic acid groups, as catalyst. The main product of a-pinene alkoxylation was a-terpinyl methyl ether being also formed bornyl methyl ether, fenchyl methyl ether, limonene and terpinolene as by-products. The absorption band at 1037 cm-1 in the FTIR spectrum of PVA_SSA40 (PVA membrane containing 40% of –OH groups esterified with SSA) which does not appear in the spectrum of PVA, indicates the presence of the sulfonic acid groups. The catalytic activity of PVA with sulfonic acid groups increases when the amount of sulfosuccinic acid used in the polymer crosslinking is increased from 5% to 40%. However, when the crosslinking degree increases from 20% to 40%, the conversion of a-pinene increases only slightly. Good values of selectivity to a-terpinyl methyl ether were obtained over poly(vinyl alcohol) with sulfonic acid groups. A simple kinetic model, which fits experimental concentration data quite well, was developed.

Phytochelatin signal tranduction and cadmium chelation in plants

As plantas utilizam diversas estratégias de sinalização para reconhecer e responder aos stresses ambientais. A maioria das vias de transdução de sinais partilham um sinal genérico, normalmente a modulação dos níveis intracelulares de Ca2+. Esta por sua vez pode iniciar uma cascata de fosforilação proteica que finalmente afecta as proteínas directamente envolvidas na protecção celular ou culmina em factores de transcrição que vão determinar a resposta fisiológica ao stresse. A percepção destes sinais e a compreensão de como estes podem activar as respostas adaptativas são factores-chave para a tolerância das plantas a stresses abióticos. Um dos principais stresses abóticos que restrigem o crescimento das plantas é a presença de metais pesados. A produção de fitoquelatinas e a subsequente quelação dos metais é o mecanismo mais conhecido de tolerância ao stresse metálico em plantas. Fitoquelatinas (PCs) são péptidos com grupos tiol que são sintetizados através da transpeptidação da glutationa (GSH), pela acção da enzima fitoquelatina sintase (PCS). No entanto, até ao momento, as vias de sinalização que levam à síntese de fitoquelatinas e à percepção do stresse metálico são pouco compreendidas. Dentro deste contexto, o presente trabalho foi elaborado com o intuito de elucidar a via de sinalização através da qual o cádmio é detectado pelas células vegetais e induz a síntese de PCs. Quase todos, os estudos de stresses abióticos em plantas apontam para o facto de a sua sinalização se basear nos mesmos tipos de sinais moleculares, nomeadamente a sinalização por cálcio, a fosforilação proteica e a indução de espécies reactivas de oxigénio (ROS). Trabalhos recentes sugerem que a sinalização de PCs poderá envolver todos estes parâmetros. Assim, uma primeira abordagem foi efectuada para compreender a síntese de PCs na espécie Arabidopsis thaliana, através da monitorizaçção da actividade de enzimas relacionadas, a γ-EC sintetase, GSH sintetase e a PC sintase (PCS), assim como o tempo necessário para o elongamento das PCs e a sua acumulação. Seguidamente, ao longo deste processo foi analisada a expressão de sinais específicos, associados com sinais de cálcio, fosforilação proteica e sinalização por ROS. A importância destes factores na síntese de PCs foi também avaliada através do uso de moduladores farmacológicos de cálcio e fosfatases proteicas e também pela indução de stresse oxidativo. Os resultados demonstraram novos dados sobre o papel do cálcio e da fosforilação proteica na produção de PCs e na síntese de GSH, revelando que a actvidade da PCS é regulada por fosforilação e que a sinalização de cálcio pode mediar a síntese de GSH. O envolvimento da sinalização de ROS na síntese de GSH, atráves de crosstalk com a sinalização de cálcio também foi proposta. Assim, os resultados aqui apresentados descrevem uma possível via de sinalização de cádmio nas plantas e da indução de fitoquelatinas. Este trabalho poderá ser portanto muito útil na implementação de novas metodologias de agricultura sustentável e práticas de fitorremediação em solos contaminados com metais pesados.

Síntese e aplicações catalíticas na funcionalização de alcanos de novos compostos com polioxometalatos e catiões orgânicos

A presente dissertação, que no seu conjunto se propõe apresentar o estudo de oxidação de compostos orgânicos com peróxido de hidrogénio na presença dos aniões do tipo Keggin, mono-substituídos por MnIII e FeIII, sob a forma de sais de tetra-n-butilamónio (TBA) e suportados em matriz de sílica funcionalizada, enquanto vital método de obtenção de importante precursores de síntese orgânica, tem na sua base o trabalho de Doutoramento desenvolvido no Departamento de Química da Universidade de Aveiro. Os compostos preparados e testados em sistema homogéneo foram os sais de TBA dos aniões de Keggin, de fórmula geral [XW11M(H2O)O39]n-, onde X = P, Si ou B e M = MnIII e FeIII. Em sistema heterogéneo foram testados diferentes materiais, que diferem entre si na matriz de sílica. Assim, fez-se a heterogeneização de [PW11Fe(H2O)O39]4- em sílica funcionalizada com catiões de césio e grupos propilamónio; [BW11Fe(H2O)O39]6- e [SiW11Fe(H2O)O39]5- foram imobilizados em sílica contendo grupos aminopropilo e o anião [PW11Mn(H2O)O39]4- foi suportado em sílica quimicamente modificada com grupos alquilamónio. Os substratos orgânicos estudados incluem o 1H-indeno, 1,2-di-hidronaftaleno, etilbenzeno, cumeno, p-cimeno, sec-butilbenzeno, 1- e 2-etilnaftaleno, cis-cicloocteno e ciclooctano. Paralelamente usaram-se alguns outros substratos, quando necessário obter esclarecimentos mecanísticos. A tese assenta numa estrutura composta por 7 capítulos. Na primeira, faz-se uma abordagem aos polioxometalatos e às reacções de oxidação de hidrocarbonetos, com particular destaque no uso de polioxometalatos em catálise oxidativa e também no uso de peróxido de hidrogénio como oxidante. A eficiência catalítica dos aniões de Keggin mono substituídos por MnIII e FeIII, em sistema homogéneo foi avaliada na oxidação de compostos orgânicos característicos, nomeadamente de ciclo-alcenilbenzenos, alquilbenzenos, ciclo-alquilbenzenos e hidrocarbonetos aromáticos policíclicos com H2O2, em acetonitrilo. Os resultados destes estudos encontram-se descritos nos capítulos dois, três e quatro desta tese. Estes compostos mostraram-se catalisadores eficientes e selectivos para a oxidação de alcanos e alcenos. O quinto capítulo da tese prossegue com a síntese, caracterização e eficiência catalítica dos polioxotungstatos referidos anteriormente imobilizados numa matriz de sílica funcionalizada com iões césio (SiO2-Cs), grupos aminopropilo (SiO2–(CH2)3NH2) ou trietilpropilamónio (SiO2-(CH2)3N(Et)3). A actividade catalítica destes compostos foi estudada utilizando o cis-cicloocteno e ciclooctano como substratos padrão. A oxidação de cis-clicoocteno originou o epóxido com 100% de selectividade e o catalisador foi reutilizado durante 4 ciclos com elevada eficiência. No sexto capítulo, são descritas as metodologias experimentais de síntese dos novos compostos, as condições catalíticas, a instrumentação e demais métodos e procedimentos usados. No sétimo e último capítulo, tecem-se as conclusões finais e apresentam-se algumas perspectivas de trabalho futuro utilizando o sistema, POM/H2O2, usado neste trabalho.

Catalisadores ou precursores de espécies activas à base de molibdénio

Atendendo à produção de epóxidos em larga escala e à sua importância como intermediários versáteis, muita atenção tem sido dada à epoxidação de olefinas. Destaca-se a implementação do processo industrial de epoxidação de propileno em fase líquida com tBHP, usando complexos de molibdénio como catalisadores homogéneos (Halcon-ARCO). Neste trabalho foram investigados novos complexos à base de molibdénio como catalisadores (ou precursores) para epoxidação de olefinas em fase líquida. Foi objecto de estudo a identificação das espécies activas e a estabilidade dos catalisadores através da sua separação no final das reacções catalíticas, caracterização e reutilização. Escolheu-se como reacção modelo a epoxidação do ciscicloocteno com tBHP (em decano, tBHPdec), a 55 ºC. Estendeu-se o estudo dos desempenhos catalíticos a diferentes substratos, oxidantes, solventes e métodos de aquecimento. A maior actividade catalítica foi observada para os complexos [MoO2Cl2L2] (L=ligando dialquilamida), mais estáveis e fáceis de manusear que [MoO2Cl2] e complexos análogos com L {THF, MeCN} (Cap. 2). A partir destes complexos podem-se formar in situ espécies activas intermediárias do tipo [(MoO2ClL2)2(μ-O)]. O complexo [MoO2(Lzol)], Lzol= ligando oxazolina quiral (Cap. 3), é um catalisador estável e versátil, activo para a epoxidação de diversas olefinas (selectividades elevadas para epóxidos, mas enantioselectividades baixas), desidrogenação oxidativa de álcoois e sulfoxidação de sulfuretos. O catalisador foi também reciclado eficientemente, usando um líquido iónico (LI). O complexo iónico [MoO2Cl{HC(3,5-Me2pz)3}]BF4 (Cap.4) converteu-se nos complexos activos [{MoO2(HC(3,5-Me2pz)3)}2(μ-O)](BF4)2, [Mo2O3(O2)2(μ-O){HC(3,5-Me2pz)3}] e [MoO3{HC(3,5-Me2pz)3}]; quando dissolvido num LI, o catalisador foi reciclado com sucesso. A presença de água e o meio oxidante influenciaram a formação destas espécies. Os complexos [CpMo(CO)3Me] (Cap.5) e [CpMo(CO)2(η3- C3H5)] (Cap.6) originaram espécies activas similares (baseado nos testes catalíticos e nos espectros FT-IR ATR dos sólidos recuperados). Para [Cp'Mo(CO)2(η3-C3H5)], a influência do Cp' na actividade catalítica sugeriu a formação de espécies activas com este ligando. A partir dos complexos [Mo(CO)4L] formaram-se in situ catalisadores estáveis, que podem ser heterogéneos: para L=2-[3(5)-pirazolil]piridina formou-se [Mo4O12L4]; para L=[3- (2-piridil)-1-pirazolil]acetato de etilo formou-se [Mo8O24L4] (Cap.7). O uso de microondas (MO) como método de aquecimento em vez de um banho de óleo (BO) resultou no aumento da velocidade da reacção catalítica, devido ao aquecimento mais rápido da mistura reaccional (Caps. 5 e 7). A utilização da solução aquosa de tBHP em vez de tBHPdec era preferível, porque excluía o decano do sistema reaccional e mantinham-se elevados os rendimentos em epóxido (Caps. 2 e 6); optimizou-se o desempenho catalítico removendo a água das misturas reaccionais (Caps. 4 e 7). O melhor resultado para a epoxidação de limoneno foi observado para [CpMoCO3Me]: 88% de rendimento em epóxido (2 h, 55 ºC, método de aquecimento MO).

Metal-organic frameworks based on phosphonate linkers

During the last few decades, Metal-Organic Frameworks (MOFs), also known as Coordination Polymers, have attracted worldwide research attentions due to their incremented fascinating architectures and unique properties. These multidimensional materials have been potential applications in distinct areas: gas storage and separation, ion exchange, catalysis, magnetism, in optical sensors, among several others. The MOF research group at the University of Aveiro has prepared MOFs from the combination of phosphonate organic primary building units (PBUs) with, mainly, lanthanides. This thesis documents the last findings in this area involving the synthesis of multidimensional MOFs based on four di- or tripodal phosphonates ligands. The organic PBUs were designed and prepared by selecting and optimizing the best reaction conditions and synthetic routes. The self-assembly between phosphonate PBUs and rare-earths cations led to the formation of several 1D, 2D and 3D families of isotypical MOFs. The preparation of these materials was achieved by using distinct synthetic approaches: hydro(solvo)thermal, microwave- and ultrasound-assisted, one-pot and ionothermal synthesis. The selection of the organic PBUs showed to have an important role in the final architectures: while flexible phosphonate ligands afforded 1D, 2D and dense 3D structures, a large and rigid organic PBU isolated a porous 3D MOF. The crystal structure of these materials was successfully unveiled by powder or single-crystal X-ray diffraction. All multidimensional MOFs were characterized by standard solid-state techniques (FT-IR, electron microscopy (SEM and EDS), solid-state NMR, elemental and thermogravimetric analysis). Some MOF materials exhibited remarkable thermal stability and robustness up to ca. 400 ºC. The intrinsic properties of some MOFs were investigated. Photoluminescence studies revealed that the selected organic PBUs are suitable sensitizers of Tb3+ leading to the isolation of intense green-emitting materials. The suppression of the O−H quenchers by deuteration or dehydration processes improves substantially the photoluminescence of the optically-active Eu3+-based materials. Some MOF materials exhibited high heterogeneous catalytic activity and excellent regioselectivity in the ring-opening reaction of styrene oxide (PhEtO) with methanol (100% conversion of PhEtO at 55 ºC for 30 min). The porous MOF material was employed in gas separation processes. This compound showed the ability to separate propane over propylene. The ionexchanged form of this material (containing K+ cations into its network) exhibited higher affinity for CO2 being capable to separate acetylene over this environment non-friendly gas.

Cobalt complexes with pyrazole ligands as catalyst precursors for the peroxidative oxidation of cyclohexane: Z-ray absorption spectroscopy studies and biological applications

[CoCl(-Cl)(Hpz(Ph))(3)](2) (1) and [CoCl2(Hpz(Ph))(4)] (2) were obtained by reaction of CoCl2 with HC(pz(Ph))(3) and Hpz(Ph), respectively (Hpz(Ph)=3-phenylpyrazole). The compounds were isolated as air-stable solids and fully characterized by IR and far-IR spectroscopy, MS(ESI+/-), elemental analysis, cyclic voltammetry (CV), controlled potential electrolysis, and single-crystal X-ray diffraction. Electrochemical studies showed that 1 and 2 undergo single-electron irreversible (CoCoIII)-Co-II oxidations and (CoCoI)-Co-II reductions at potentials measured by CV, which also allowed, in the case of dinuclear complex 1, the detection of electronic communication between the Co centers through the chloride bridging ligands. The electrochemical behavior of models of 1 and 2 were also investigated by density functional theory (DFT) methods, which indicated that the vertical oxidation of 1 and 2 (that before structural relaxation) affects mostly the chloride and pyrazolyl ligands, whereas adiabatic oxidation (that after the geometry relaxation) and reduction are mostly metal centered. Compounds 1 and 2 and, for comparative purposes, other related scorpionate and pyrazole cobalt complexes, exhibit catalytic activity for the peroxidative oxidation of cyclohexane to cyclohexanol and cyclohexanone under mild conditions (room temperature, aqueous H2O2). Insitu X-ray absorption spectroscopy studies indicated that the species derived from complexes 1 and 2 during the oxidation of cyclohexane (i.e., Ox-1 and Ox-2, respectively) are analogous and contain a Co-III site. Complex 2 showed low invitro cytotoxicity toward the HCT116 colorectal carcinoma and MCF7 breast adenocarcinoma cell lines.

Radiological impact associated to Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM) from coal-fired power plants emissions

Certain materials used and produced in a wide range of non-nuclear industries contain enhanced activity concentrations of natural radionuclides. In particular, electricity production from coal is one of the major sources of increased human exposure to naturally occurring radioactive materials. A methodology was developed to assess the radiological impact due to natural radiation background. The developed research was applied to a specific case study, the Sines coal-fired power plant, located in the southwest coastline of Portugal. Gamma radiation measurements were carried out with two different instruments: a sodium iodide scintillation detector counter (SPP2 NF, Saphymo) and a gamma ray spectrometer with energy discrimination (Falcon 5000, Canberra). Two circular survey areas were defined within 20 km of the power plant. Forty relevant measurements points were established within the sampling area: 15 urban and 25 suburban locations. Additionally, ten more measurements points were defined, mostly at the 20-km area. The registered gamma radiation varies from 20 to 98.33 counts per seconds (c.p.s.) corresponding to an external gamma exposure rate variable between 87.70 and 431.19 nGy/h. The highest values were measured at locations near the power plant and those located in an area within the 6 and 20 km from the stacks. In situ gamma radiation measurements with energy discrimination identified natural emitting nuclides as well as their decay products (Pb-212, Pb-2142, Ra-226, Th-232, Ac-228, Th-234, Pa-234, U- 235, etc.). According to the results, an influence from the stacks emissions has been identified both qualitatively and quantitatively. The developed methodology accomplished the lack of data in what concerns to radiation rate in the vicinity of Sines coal-fired power plant and consequently the resulting exposure to the nearby population.

Measurements of environmental background radiation in the surrounding area of a coal-fired power plant

Certain materials used and produced in a wide range of non-nuclear industries contain enhanced activity concentrations of natural radionuclides. In particular, electricity production from coal is one of the major sources of increased exposure to man from enhanced naturally occurring materials. Over the past decades there has been some discussion about the elevated natural background radiation in the area near coal-fired power plants due to high uranium and thorium content present in coal. This work describes the methodology developed to assess the radiological impact due to natural radiation background increasing levels, potentially originated by a coal-fired power plant’s operation. Gamma radiation measurements have been done with two different instruments: a scintillometer (SPP2 NF, Saphymo) and a gamma ray spectrometer with energy discrimination (Falcon 5000, Canberra). A total of 40 relevant sampling points were established at locations within 20 km from the power plant: 15 urban and 25 suburban measured stations. The highest values were measured at the sampling points near to the power plant and those located in the area within the 6 and 20 km from the stacks. This may be explained by the presence of a huge coal pile (1.3 million tons) located near the stacks contributing to the dispersion of unburned coal and, on the other hand, the height of the stacks (225 m) which may influence ash’s dispersion up to a distance of 20 km. In situ gamma radiation measurements with energy discrimination identified natural emitting nuclides as well as their decay products (212Pb, 214Pb, 226Ra 232Th, 228Ac, 234Th 234Pa, 235U, etc.). This work has been primarily done to in order to assess the impact of a coal-fired power plant operation on the background radiation level in the surrounding area. According to the results, an increase or at least an influence has been identified both qualitatively and quantitatively.

Dispersion Modelling of Natural Radionuclides 238U, 232Th and 40K Released from Coal-fired Power Plants Operations

The aim of this work was to simulate the radionuclides dispersion in the surrounding area of a coal-fired power plant, operational during the last 25 years. The dispersion of natural radionuclides (236Ra, 232Th and 40K) was simulated by a Gaussian plume dispersion model with three different stability classes estimating the radionuclides concentration at ground level. Measurements of the environmen-tal activity concentrations were carried out by γ-spectrometry and compared with results from the air dispersion and deposition model which showed that the stabil-ity class D causes the dispersion to longer distances up to 20 km from the stacks.

Regulation of Nedd4-2 self-ubiquitination and stability by a PY motif located within its HECT-domain.

Ubiquitin ligases play a pivotal role in substrate recognition and ubiquitin transfer, yet little is known about the regulation of their catalytic activity. Nedd4 (neural-precursor-cell-expressed, developmentally down-regulated 4)-2 is an E3 ubiquitin ligase composed of a C2 domain, four WW domains (protein-protein interaction domains containing two conserved tryptophan residues) that bind PY motifs (L/PPXY) and a ubiquitin ligase HECT (homologous with E6-associated protein C-terminus) domain. In the present paper we show that the WW domains of Nedd4-2 bind (weakly) to a PY motif (LPXY) located within its own HECT domain and inhibit auto-ubiquitination. Pulse-chase experiments demonstrated that mutation of the HECT PY-motif decreases the stability of Nedd4-2, suggesting that it is involved in stabilization of this E3 ligase. Interestingly, the HECT PY-motif mutation does not affect ubiquitination or down-regulation of a known Nedd4-2 substrate, ENaC (epithelial sodium channel). ENaC ubiquitination, in turn, appears to promote Nedd4-2 self-ubiquitination. These results support a model in which the inter- or intra-molecular WW-domain-HECT PY-motif interaction stabilizes Nedd4-2 by preventing self-ubiquitination. Substrate binding disrupts this interaction, allowing self-ubiquitination of Nedd4-2 and subsequent degradation, resulting in down-regulation of Nedd4-2 once it has ubiquitinated its target. These findings also point to a novel mechanism employed by a ubiquitin ligase to regulate itself differentially compared with substrate ubiquitination and stability.

Targeting B-cell lymphomas with inhibitors of the MALT1 paracaspase.

The paracaspase MALT1 is an Arg-specific protease that cleaves multiple substrates to promote lymphocyte proliferation and survival. The catalytic activity of MALT1 is normally tightly regulated by antigen receptor triggering, which promotes MALT1 activation by its inducible monoubiquitination-dependent dimerization. Constitutive MALT1 activity is a hallmark of specific subsets of B-cell lymphomas, which are characterized by chromosomal translocations or point mutations that activate MALT1 or its upstream regulators. Recent findings suggest that such lymphomas may be sensitive to treatment with MALT1 inhibitors. Here we review recent progress in the understanding of MALT1 function and regulation, and the development of small molecule MALT1 inhibitors for therapeutic applications.

A new class of isothiocyanate-based irreversible inhibitors of macrophage migration inhibitory factor.

Macrophage migration inhibitory factor (MIF) is a homotrimeric multifunctional proinflammatory cytokine that has been implicated in the pathogenesis of several inflammatory and autoimmune diseases. Current therapeutic strategies for targeting MIF focus on developing inhibitors of its tautomerase activity or modulating its biological activities using anti-MIF neutralizing antibodies. Herein we report a new class of isothiocyanate (ITC)-based irreversible inhibitors of MIF. Modification by benzyl isothiocyanate (BITC) and related analogues occurred at the N-terminal catalytic proline residue without any effect on the oligomerization state of MIF. Different alkyl and arylalkyl ITCs modified MIF with nearly the same efficiency as BITC. To elucidate the mechanism of action, we performed detailed biochemical, biophysical, and structural studies to determine the effect of BITC and its analogues on the conformational state, quaternary structure, catalytic activity, receptor binding, and biological activity of MIF. Light scattering, analytical ultracentrifugation, and NMR studies on unmodified and ITC-modified MIF demonstrated that modification of Pro1 alters the tertiary, but not the secondary or quaternary, structure of the trimer without affecting its thermodynamic stability. BITC induced drastic effects on the tertiary structure of MIF, in particular residues that cluster around Pro1 and constitute the tautomerase active site. These changes in tertiary structure and the loss of catalytic activity translated into a reduction in MIF receptor binding activity, MIF-mediated glucocorticoid overriding, and MIF-induced Akt phosphorylation. Together, these findings highlight the role of tertiary structure in modulating the biochemical and biological activities of MIF and present new opportunities for modulating MIF biological activities in vivo.

Phospha-adamantanes as ligands for palladium-catalyzed cross-coupling reactions

New and robust methodologies have been designed for palladium-catalyzed crosscoupling reactions involving·a novel·class oftertiary phosphine ligand incorporating a phospha-adamantane framework. It has been realized that bulky, electron-rich phosphines, when used as ligands for palladium, allow for cross-coupling reactions involving even the less reactive aryl halide substrates with a variety of coupling partners. In an effort to design new ligands suitable for carrying out cross-coupling transformations, the secondary phosphine, 1,3,5,7-tetramethyl-2,4,8-trioxa-6phosphaadamantane was converted into a number of tertiary phosphine derivatives. The ability of these tertiary phosphaadamantanes to act as effective ligands in the palladiumcatalyzed Suzuki cross-coupling was examined. 1,3,5,7-Tetramethyl-6-phenyl-2,4,8trioxa- 6-phosphaadamantane (PA-Ph) used in combination with Pdz(dba)3permitted the reaction of an array of aryl iodides, bromides and chlorides with a variety arylboronic acids to give biaryls in good to excellent yields. Subsequently, palladium complexes of PA-Ph were prepared and isolated in high yields as air stable palladium bisphosphine complexes. Two different kinds of crystals were isolated and upon characterization revealed two complexes, Pd(PA-Ph)z.dba and Pd(PA-Ph)zOz. Preliminary screening for their catalytic activity indicated that the former is more reactive than the latter. Pd(PAPh) z.dba was applied as the catalyst for Sonogashira cross-coupling reactions of aryl iodides and bromides and in the reactions of aryl bromides and chlorides with ketones to give a-arylated ketones at mild temperatures in high yields.

Primary structure and expression studies of the dihydrofolate reductase gene (DFRI) of Saccharomyces cerevisiae

The nucleotide sequence of a genomic DNA fragment thought previously to contain the dihydrofolate reductase gene (DFR1) of Saccharomyces cerevisiae by genetic criteria was determined. This DNA fragment of 1784' basepairs contains a large open reading frame from position 800 to 1432, which encodes a enzyme with a predicted molecular weight of 24,229.8 Daltons. Analysis of the amino acid sequence of this protein revealed that the yeast polypep·tide contained 211 amino acids, compared to the 186 residues commonly found in the polypeptides of other eukaryotes. The difference in size of the gene product can be attributed mainly to an insert in the yeast gene. Within this region, several consensus sequences required for processing of yeast nuclear and class II mitochondrial introns were identified, but appear not sufficient for the RNA splicing. The primary structure of the yeast DHFR protein has considerable sequence homology with analogous polypeptides from other organisms, especially in the consensus residues involved in cofactor and/or inhibitor binding. Analysis of the nucleotide sequence also revealed the presence of a number of canonical sequences identified in yeast as having some function in the regulation of gene expression. These include UAS elements (TGACTC) required for tIle amino acid general control response, and "TATA H boxes as well as several consensus sequences thought to be required for transcriptional termination and polyadenylation. Analysis of the codon usage of the yeast DFRl coding region revealed a codon bias index of 0.0083. this valve very close to zero suggestes 3 that the gene is expressed at a relatively low level under normal physiological conditions. The information concerning the organization of the DFRl were used to construct a variety of fusions of its 5' regulatory region with the coding region of the lacZ gene of E. coli. Some of such fused genes encoded a fusion product that expressed in E.coli and/or in yeast under the control of the 5' regulatory elements of the DFR1. Further studies with these fusion constructions revealed that the beta-galactosidase activity encoded on multicopy plasmids was stimulated transiently by prior exposure of yeast host cells to UV light. This suggests that the yeast PFRl gene is indu.ced by UV light and nlay in1ply a novel function of DHFR protein in the cellular responses to DNA damage. Another novel f~ature of yeast DHFR was revealed during preliminary studies of a diploid strain containing a heterozygous DFRl null allele. The strain was constructed by insertion of a URA3 gene within the coding region of DFR1. Sporulation of this diploid revealed that meiotic products segregated 2:0 for uracil prototrophy when spore clones were germinated on medium supplemented with 5-formyltetrahydrofolate (folinic acid). This finding suggests that, in addition to its catalytic activity, the DFRl gene product nlay play some role in the anabolisln of folinic acid. Alternatively, this result may indicate that Ura+ haploid segregants were inviable and suggest that the enzyme has an essential cellular function in this species.