Comparative biology of the two sister species of Triatominae (Hemiptera: Reduviidae)

INTRODUCTION: Triatoma pseudomaculata and T. wygodzinskyi (Hemiptera: Reduviidae: Triatominae) are two Brazilian vectors of Chagas disease. The first is an arboricolous species in sylvatic environment and considered a vector of T. cruzi in peridomestic structures; the second, a rupicolous species in the wild environment of no epidemiological importance. In order to test the assumption that sister species share biological traits, comparative studies of their development cycle and blood ingestion were conducted. METHODS: Eggs laid by five field females of each species were randomly selected. The nymphs were observed daily and fed on mice weekly. The time required to pass through the different stages to adulthood was recorded in days. The triatomines were weighed individually before and after feeding. The mortality rate according to each nymphal stage was calculated. RESULTS AND CONCLUSIONS: Analysis of the results shows that they display only minor biological differences even though they exhibit a distinct ecology. This suggests that the biological traits are important criteria to determine the relationship between species.

Rigid pavements distresses - pavement condition index evaluation

Pavements require maintenance in order to provide good service levels during their life period. Because of the significant costs of this operation and the importance of a proper planning, a pavement evaluation methodology, named Pavement Condition Index (PCI), was created by the U.S. Army Corps of Engineers. This methodology allows for the evaluation of the pavement condition along the life period, generally yearly, with minimum costs and, in this way, it is possible to plan the maintenance action and to adopt adequate measures, minimising the rehabilitation costs. The PCI methodology provides an evaluation based on visual inspection, namely on the distresses observed on the pavement. This condition index of the pavement is classified from 0 to 100, where 0 it is the worst possible condition and 100 the best possible condition. This methodology of pavement assessment represents a significant tool for management methods such as airport pavement management system (APMS) and life-cycle costs analysis (LCCA). Nevertheless, it has some limitations which can jeopardize the correct evaluation of the pavement behavior. Therefore the objective of this dissertation is to help reducing its limitations and make it easier and faster to use. Thus, an automated process of PCI calculation was developed, avoiding the abaci consultation, and consequently, minimizing the human error. To facilitate also the visual inspection a Tablet application was developed to replace the common inspection data sheet and thus making the survey easier to be undertaken. Following, an airport pavement condition was study accordingly with the methodology described at Standard Test Method for Airport Pavement Condition Index Surveys D5340, 2011 where its original condition level is compared with the condition level after iterate possible erroneous considered distresses as well as possible rehabilitations. Afterwards, the results obtained were analyzed and the main conclusions presented together with some future developments.

Epidemiological factors related to the transmission risk of Trypanosoma cruzi in a Quilombola community, State of Mato Grosso do Sul, Brazil

INTRODUCTION: This work was an epidemiological investigation of the risk of Trypanosoma cruzi transmission in the rural Quilombola community of Furnas do Dionízio, State of Mato Grosso do Sul, Brazil. METHODS: Of the 71 animals examined, seven were captured (two opossums, Didelphis albiventris; four rats, Rattus rattus; and one nine-banded armadillo, Dasypus novemcinctus) and 64 were domestic (one canine, Canis familiaris; five pigs, Sus scrofa; two bovines, Bos taurus; five caprines, Capra sp.; and 51 ovines, Ovis aries). Parasitological tests were performed to detect parasites in the blood and to identify the morphology of flagellates. These methods included fresh examinations, buffy coat tests and blood cultures. Molecular analysis of DNA for identification of trypanosomatids was performed by polymerase chain reaction (PCR) with primers S35 and S36. RESULTS: The parasitological tests showed flagellates in an opossum and two cattle. The molecular tests showed DNA from T. cruzi in an opossum and a pig. Triatoma sordida was the only triatomine species found in the community, and it colonized households (four specimens) and the surrounding areas (124 specimens). Twenty-three specimens tested positive for flagellates, which were subsequently identified as T. cruzi by PCR. CONCLUSIONS: Data analysis demonstrated that T. cruzi has a peridomestic life cycle that involves both domestic and wild mammals.

Prospective system analysis of stationary battery systems under the frame of Constructive Technology Assessment

Based on the report for the unit “Project IV” of the PhD programme on Technology Assessment under the supervision of Dr.-Ing. Marcel Weil and Prof. Dr. António Brandão Moniz. The report was presented and discussed at the Doctorate Conference on Technologogy Assessment in July 2013 at the University Nova Lisboa, Caparica campus.

Bioactivity of plant extracts on the larval and pupal stages of Aedes aegypti (Diptera, Culicidea)

Introduction Aedes aegypti is responsible for the transmission of the dengue and yellow fever viruses. This study evaluated the effects of extracts from Cnidosculos phyllacanthus, Ricinus communis, and Coutarea hexandra on the developmental periods of A.aegypti larvae and pupae. Crude extracts of C. phyllacanthus and C. hexandra and oil from R. communis and C. phyllacanthus were used. Methods Bioassays of the larvicidal and pupicidal effects of these products at different concentrations and times of exposure were evaluated. The lethal and sublethal effects were determined using different concentrations in larvicidal tests. Mortality data were evaluated by Probit analysis to determine the LC50 and LC90 values. Results The vegetable oils from C. phyllacanthus and R. communis demonstrated greater efficiency for larval control with an LC50=0.28µl/mL and an LC90=1.48µl/mL and LC50=0.029µl/mL and a LC90=0.26µl/mL, respectively. In pupal tests toxic effects for all insects were verified after exposure to the products at significant LC50 and LC90 values for 24 and 48h. The effects of sublethal concentrations of C. phyllacanthus (oil) were more effective on the insects. Conclusions The vegetables oils from C. phyllacanthus and R. communis demonstrated greater potential from the control of different developmental periods in the life cycle of this insect.

Primera Reservoir Ltd. strategic position analysis

The purpose of this work is to understand the internal and external structure in which the company operates to provide an idea of the strategic actions needed to accomplish their organizational objectives. A strategic software was employed to build up phase one and phase two, phase one involved analysing internal and external factors that influence the company, comprehending their core competences, factors that influence the market and identification of strengths and weaknesses. Phase two consisted on providing an idea of their real competitive position and the suggestion of a development strategy, given the possible limitations in the external factors, the company should carefully analyse some of the opportunities present in the industry overseas to continue to develop their business and increase its profitability. Furthermore, a source of competitive advantage was found in their outbound logistics which could serve a differentiator between their competitors.

Brain schistosomiasis in mice experimentally infected with Schistosoma mansoni

Introduction Human neuroschistosomiasis has been reported in the literature, but the possibility of modeling neuroschistosomiasis in mice is controversial. Methods In two research laboratories in Brazil that maintain the Schistosoma mansoni life cycle in rodents, two mice developed signs of brain disease (hemiplegia and spinning), and both were autopsied. Results S. mansoni eggs, both with and without granuloma formation, were observed in the brain and meninges of both mice by optical microscopy. Conclusions This is the first description of eggs in the brains of symptomatic mice that were experimentally infected with S. mansoni. An investigation of experimental neuroschistosomiasis is now feasible.

Biology of Triatoma carcavalloi Jurberg, Rocha & Lent, 1998 under laboratory conditions

Introduction Triatoma carcavalloi is a wild species that is found in sympatry with Triatoma rubrovaria and Triatoma circummaculata, which are vectors of Trypanosoma cruzi currently found in rural areas of Rio Grande do Sul, Brazil. Methods Fertility was assessed and to determine the incubation period, the eggs were observed until hatching. The first meal was offered to 1st stage nymphs. The intermolt period was also determined. The number of blood meals was quantified at each nymphal stage and the resistance to fasting as the period between ecdysis and death. Mortality was assessed and longevity was determined by recording the time that elapsed from molting to the adult stage and until death. The developmental cycle was assessed by recording the length in days of each stage from molting to adult hood. Results The average incubation period was 22.7 days. The average first meal occurred 3.1 days after hatching. The 5th stage nymph to adult intermolting period was the longest at 193.4 days. The average number of feedings during nymphal development was 13.4. The resistance to fasting assay indicated that the 3rd, 4th and 5th stage nymphs presented higher resistance than did adults. The highest mortality rate was observed in the 3rd stage nymphs (22.2%). The average length of adult survival was 25.6 weeks, and the average total life cycle lasted 503.4 days. Conclusions This study is the first report on the biology of T. carcavalloi that fed on mice. The presented findings expand the bionomic knowledge of these species.

Teste de um modelo preditor da integridade

Dissertação de Mestrado apresentada ao ISPA - Instituto Universitário

Ecoepidemiology and biology of Eratyrus mucronatus Stål, 1859 (Hemiptera: Reduviidae: Triatominae), a sylvatic vector of Chagas disease in the Brazilian Amazon

Introduction Eratyrus mucronatus Stål, 1859 is a wild triatomine vector of Trypanosoma cruzi Chagas, 1909. However, little is known regarding the biology and ecoepidemiology of this triatomine in the Brazilian Amazon. The present study describes the biology of E. mucronatus grown under laboratory conditions and the epidemiological aspects of its natural breeding sites. Methods Five colonies were monitored in the field for 3 years. Temperature and humidity measurements were taken in the mornings and afternoons at the natural breeding sites, and the behavior and distribution of the nymphs and adults were observed in the wild colony. We also monitored the life cycle under controlled laboratory conditions. Results Some factors that were considered decisive for the establishment of these colonies were present at all of the colonies studied in the field. These factors included an active termite nest, a vertebrate for repast, and dry and shaded substrates with temperatures of 24-28°C and with humidity of 80-90%. A generation was developed in 274 days under these microclimatic conditions in the laboratory. Conclusions The climatic variables described in the field indicate that these environmental parameters have a limiting effect on the dispersal and colonization of E. mucronatus to new environments. In addition, the long period of development to adulthood demonstrates that only one generation can develop per year even under the more favorable laboratory conditions.

Financing exponential growth at H3

H3 is a fast-food chain that introduced the concept of gourmet hamburgers in the Portuguese market. This case-study illustrates its financing strategy that supported an exponential growth represented by opening 33 restaurants within approximately 3 years of its inception. H3 is now faced with the challenge of structuring its foreign ventures and change its financial approach. The main covered topics are the options an entrepreneur has for financing a new venture and how it evolves along the life cycle and different business approaches, namely franchising. It aims to be used as a learning tool in courses such as entrepreneurial finance.

Historical trajectories of currently shrinking Portuguese cities: A typology of urban shrinkage

Cities develop according to different patterns, undergoing population growth during some periods and decline (shrinkage) during others. Theories attempting to understand these behaviours include: 1) shrinkage is a natural process in the life cycle of a city, alternating with periods of growth, or 2) shrinkage is an extreme event that places cities into a continuous decline process with no return to population growth. We use retrospective data over a period of 130 years to study 25 Portuguese cities currently facing population decline, and show that both theories coexist in time and space. Five types of shrinking city are revealed: “Persistent Early Shrinkage” due to exodus fromthe rural periphery, “Metropolitan Shrinkage” due to the challenges of urban sprawl, “Recent Shrinkage” in de-industrialisation hotspots, “Cyclic Shrinkage” occurring in political transformation cores, and “Mild Shrinkage” due to life-style disamenity. As diversity of city population trajectories appears to be the norm in both Portugal and other Western European countries, the incorporation of this range into the management of urban transitions is recommended in order to reinforce city resilience.

An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Technological evolution

The evolution of a technology and the understanding of the moment in its life cycle is of the utmost importance to the entry strategy devised by any company. Having the entry of EDP Brazil on the micro-generation market as background, the present workproject attempts to summarize the most important topics in management literature concerning the theory of technology life-cycles and the updated literature on developments of photovoltaic technology to infer the current positioning of this technology in the theoretical models. The need for this type of work stems from the very common lack of bridging between the academic research of economic aspects relevant to the evolution of technologies and the agents of research on specific technological issues. When this occurs, namely due to the external nature of research to companies, thereby escaping the harsh economic controls of a profit seeking enterprise, the evolution many times lacks the appropriate framework to be studied on a more forward looking manner and to allow for management decisions to be based on.

Qualitative risk assessment during polymer mortar test specimens preparation - methods comparison

Polymer binder modification with inorganic nanomaterials (NM) could be a potential and efficient solution to control matrix flammability of polymer concrete (PC) materials without sacrificing other important properties. Occupational exposures can occur all along the life cycle of a NM and “nanoproducts” from research through scale-up, product development, manufacturing, and end of life. The main objective of the present study is to analyse and compare different qualitative risk assessment methods during the production of polymer mortars (PM) with NM. The laboratory scale production process was divided in 3 main phases (pre-production, production and post-production), which allow testing the assessment methods in different situations. The risk assessment involved in the manufacturing process of PM was made by using the qualitative analyses based on: French Agency for Food, Environmental and Occupational Health & Safety method (ANSES); Control Banding Nanotool (CB Nanotool); Ecole Polytechnique Fédérale de Lausanne method (EPFL); Guidance working safely with nanomaterials and nanoproducts (GWSNN); Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, Italy method (ISPESL); Precautionary Matrix for Synthetic Nanomaterials (PMSN); and Stoffenmanager Nano. It was verified that the different methods applied also produce different final results. In phases 1 and 3 the risk assessment tends to be classified as medium-high risk, while for phase 2 the more common result is medium level. It is necessary to improve the use of qualitative methods by defining narrow criteria for the methods selection for each assessed situation, bearing in mind that the uncertainties are also a relevant factor when dealing with the risk related to nanotechnologies field.