Políticas de esfuerzo combinado económico-laboral en la retención y atracción del conocimiento científico: un estudio del caso español

El objetivo de este trabajo es la aportación de un caso que evidencie la importancia de realizar esfuerzos tanto en el terreno económico como en el laboral para conseguir una adecuada retención y atracción del conocimiento científico. Para ello, se analizan los datos de un estudio que destaca estas cuestiones para un país como España, que necesita urgentemente mejorar su balance de movilidad investigadora. Los resultados confirman la importancia de la aplicación de estas medidas y las debilidades que presenta en este tipo de políticas el sistema nacional de investigación, desarrollo e innovación (I+D+i). Abstract: The goal of this paper is to disclose a case study which highlights the impor tance of realising effor ts at an economic and labour scale in order to reach an adequate retention and attraction of scientific knowledge. Although science has evolved during different periods through the flow of mankind and ideas, studies about international mobility of scientists are recent in time. It started mid XXth century with the brain drain phenomenon. To alleviate the loss of scientists, countries have disclosed different politics. Some countries like Singapore, Southern Korea, India and China have been successful in bringing scientists back home. Those countries have made huge effor ts in human resources investments and scientific infrastructures, so as to enforce their national R&D&I systems. Despite such experiences and despite the increasement in terms of evidences related with international scientific mobility, few studies and figures have been disclosed. The goal of this current work is to disclose data, which backs up the liability of such kind of politics that combine effor ts in economic and labour terms. For that reason, data has been analyzed from a study which highlights these key aspects for a country like Spain and which recently established a wide range of politics in order to attract scientists. Despite the increasement of financial resources, such politics have turned out unable to reach a proper balance in terms of mobility research. Such data as well as it analysis comes from the development of an annual survey to Spanish scientists during the period 2008- 2011. Based on sample data and analysis an expectations index for the coming year has been constructed. This compares the level of confidence which related the support and prestige of their national R&D&I systems in which they operate. Two groups where surveyed: young researchers which currently work in Spain and as a group are more likely to go working abroad and Spanish scientists who are currently working abroad. Samples were obtained for young researchers were the following: 2008 (217), 2009 (270), 2010 (390) and 2011 (610). In the case of Spanish scientists abroad, the following data were obtained: 2008 (218), 2009 (250), 2010 (241) and 2011 (167). Both groups assume simple random sampling, with a level of confidence of 95%. The results obtained confirm the importance of this combined effor t of labor and economic policies which presents weaknesses of Spanish national R&D&I systems and its application, so that Spain becomes a pole of excellence in terms of attraction and retention of scientific knowledge.

Corpus de tesis de ingeniería : paralelismo de las conclusiones entre inglés y español

El objetivo de este Proyecto Fin de Carrera es abordar el análisis del capítulo de conclusiones de tesis de ingeniería de telecomunicación a partir de un corpus comparable en inglés y español. A través del léxico podrán conocerse las expresiones típicas y la estructura de capítulo de conclusiones, tanto en inglés como en español. Para empezar este Proyecto, se ha compilado los corpus que se quieren comparar, en total se ha digitalizado tres corpus, uno con 24 conclusiones de tesis doctorales en español, otro con el mismo número de capítulos de conclusiones de tesis doctorales en inglés (PhD) y por último un corpus de conclusiones de tesis de fin de máster y de grado. El primer análisis que se ha realizado es el de la estructura de las conclusiones a partir de los títulos y subtítulos del capítulo. Se han comparado los títulos más utilizados y se han comentado las coincidencias y diferencias entre los corpus. La estructura vista a través de los subtítulos, se ha comparado con la propuesta por la autora Glasman-Deal (2011) en trabajos académicos de investigación, principalmente en artículos de investigación. La siguiente parte del Proyecto se ha centrado en el estudio del léxico, para ello nos hemos ayudado de la herramienta informática Wordsmith tools de la que se han explicado sus herramientas y funciones más útiles para este trabajo entre ellas el plot, que informa número de archivos en la que aparece cada palabra en el corpus. Las palabras con mayor plot son las más usadas por todos los doctorandos cuando escriben el capítulo de conclusiones .Se han elaborado unas pirámides donde se han colocado las palabras propias del género académico de las tesis por orden de uso. Las más usadas, con mayor plot, en la base y según se asciende aparecen las que tienen menor plot, con el fin de ver de una forma gráfica el peso que tiene cada palabra en el corpus. El siguiente paso del análisis del léxico ha tenido el objetivo de diferenciar los contextos de uso de las palabras incluidas en las pirámides. Se ha diferenciado entre los usos de las palabras dependiendo de su denotación académica o técnica. Esta comparación ha permitido comprobar que dentro del mismo corpus un sustantivo como contribuciones tiene connotación positiva o negativa dependiendo del contexto. Con los ejemplos aportados por los corpus se proporciona una base para el análisis lingüístico, centrado en los sustantivos, en este trabajo. Para finalizar el Proyecto, se ha implementado una base de datos con los resultados obtenidos del análisis de los sustantivos en la que se pueden ver las palabras que corresponden a cada nivel de la pirámide y ejemplos del uso de estas palabras. The aim of this Project is to analyze the concluding chapter of PhD thesis in the field of telecommunication engineering by means of a comparable corpus in English and Spanish. Through the lexis we will be able to capture useful expressions and the typical structure of the chapter in these specialized thesis, either in English and Spanish. To start with, three corpora have been compiled. The first one consists of 24 concluding chapters of PhD thesis in Spanish; the second, is made up of the same number of chapters of PhD thesis in the English language; and finally, 24 further chapters of Master and Degree thesis in English were digitalized and prepared for lexis analysis. Second, the study of the structure of the chapter of conclusions has been carried out. In this part the most common titles in the chapter of conclusions have been analysed and compared so as to find differences and similarities between the two languages compared. Moreover, the structure found through the subtitles in the conclusions of the thesis has been compared with the structure proposed by Glasman-Deal (2011) in her book Science Research Writing. Third, the study has been focused on the lexis of each corpus. These corpora have been treated with a lexis analyser called Wordsmith tools. The variables of frequency and plot have been applied to withdraw the most widely used nouns from the list of all the words found in any of the corpus. A pyramidal structure has been designed in order to show the academic or gender nouns - the ones usually found in the concluding chapter of thesis – nouns with a higher plot in the corpus. Two different types of context have been found for these nouns: technical and academic denotation. To show the difference in use of these nouns, arranged examples of contexts are given for each of the words studied. Finally, a database has been implemented to arrange the results of the lexis study. In this database the most significant examples of each noun are shown.

Desarrollo experimental de un elemento constructivo de envolvente, no estructural, a partir de una matriz de plástico reciclado, reforzado con fibras naturales y/o sintéticas

Esta Tesis trata sobre el diseño y desarrollo de un material constructivo de fachada (tras ventilada), empleando plástico reciclado (granza de caucho, de neumáticos fuera de uso) para su elaboración. El uso de materiales reciclados para la elaboración de nuevos materiales constructivos, es a día de hoy, un valor agregado que contribuye tanto a la disminución de desechos tóxicos, como a la fabricación de productos de alta calidad. La investigación partió de la necesidad de comprender qué es un plástico, cómo son producidos, cuáles son los factores que permitían su reciclaje y qué propiedades podrían ser aprovechadas para desarrollar un nuevo material constructivo. En el estado del arte, fueron analizados los aspectos del plástico relacionados a su composición, propiedades, tipologías, producción, consumo, legislación europea y española, reciclaje y valorización energética. Para analizar más profundamente los materiales desarrollados a partir de plásticos reciclados, desde textiles hasta elementos constructivos. Con el conocimiento adquirido mediante este análisis previo, se diseñó una metodología de experimentación, utilizando caucho reciclado y derivados del yeso como agregados, en una matriz de resinas poliméricas reforzada con fibras naturales y sintéticas. Los resultados obtenidos en los ensayos físicos y térmicos, con los elementos producidos, demostraron que el material tiene una excelente resistencia a tensión así como una baja conductividad térmica. Esta investigación, servirá como precedente para el desarrollo de nuevos materiales y sistemas constructivos, utilizando agregados de plástico reciclado, en los procesos de fabricación. Ya que ha comprobado el enorme potencial que ofrecen, creando nuevos materiales, y contribuyendo a reducir la contaminación medio ambiental. "La mayor recompensa de nuestro trabajo no es lo que nos pagan por él, sino aquello en lo que nos convierte". John Ruskin Material compuesto (Composite) de caucho reciclado, fibras y resinas poliméricas. ABSTRACT This thesis deals with the design and development of a new facade construction material using recycled plastic (rubber pellets from used tires) for processing. The use of recycled materials for the development of new building materials, today is an added value which contributes both to the reduction of toxic waste, as well as the processing of products of good quality. The research derives from the need to understand what a plastic is, how they are produced, what the factors that allowed recycling are and what properties can be exploited to develop a new building material. In the prior art, were analyzed plastic aspects related to its composition, properties, typologies, production, consumption, European and Spanish legislation, recycling and energy recovery. To further analyze the materials developed from recycled plastics, from textiles to construction elements. With the knowledge gained from this previous analysis, we designed an experimental approach using recycled rubber and plaster derivatives as aggregates in a polymeric resin matrix reinforced with natural and synthetic fibers. The results obtained in physical and thermal testing, with the elements produced, showed that the material has excellent tensile strength and a low thermal conductivity. This research will serve as a precedent for the development of new materials and building systems, using recycled plastic aggregates in the manufacturing processes. Since it was found the enormous potential, creating new materials, and helping reduce environmental pollution. "The greatest reward of our work is not what we get paid for it, but what they make us."

Los dibujos de arquitectura gótica española de George E. Street

Between 1861 and 1863 the British architect George E. Street made several trips in order to study the Spanish gothic architecture, not so well known until then. He published afterwards, in 1865, a book entitled Some Account of Gothic Architecture in Spain which became the standard reference on the issue for generations of British and Spanish scholars. His work was supported by an incredible amount of reliable drawings he managed to create on the spot, that were enthusiastically greeted by critics and historians of the architecture. In this paper we will trace the path of his journeys and present the catalogue of his Spanish sketchbooks, analyzing his technique -in the context of his forerunners- and its reception in the academic world, both in Spain and England.

Analysis of the Iberian electricity forward market hedging efficiency

An assessment of the hedging performance in the Iberian Forward Electricity Market is performed. Aggregated data from the Portuguese and Spanish clearing houses for energy derivatives are considered. The hedging performance is measured through the ratio of the final open interest of a month derivatives contract divided by its accumulated cleared volume. The base load futures in the Iberian energy derivatives exchange show the lowest ratios due to good liquidity. The peak futures show bigger ratios as their reduced liquidity is produced by auctions fixed by Portuguese regulation. The base load swaps settled in the clearing house located in Spain show initially large values due to low registered volumes, as this clearing house is mainly used for short maturity (daily and weekly swaps). This hedging ratio can be a powerful oversight tool for energy regulators when accessing to all the derivatives transactions as envisaged by European regulation.

International Materials Science Seminars: A Bridge between Two Continents

International Materials Science Seminars aim at combining the expertise of several advanced research groups and creating an unique opportunity for foreign and Spanish students in terms of cutting-edge research.

Casa Huarte: José Antonio Corrales y Ramón Vázquez Molezún. El concepto de lo experimental en el ámbito doméstico

Se plantea aquí el estudio de la Casa Huarte (1966) como un experimento doméstico -así lo concibió el matrimonio Huarte desde la libertad de acción y la entrega al talento de los arquitectos- que sintetizó los principios de los proyectos de la primera etapa de la obra de José Antonio Corrales (1921-2010) y Ramón Vázquez Molezún (1922-1993): paisaje construido, topografía modificada, basamento pesado y arraigado, cubierta ligera flotante y abstracción compositiva. La considerada vivienda experimental del siglo XX estaba asociada a estructuras familiares reducidas, como mucho formadas por un matrimonio con dos hijos. La Casa Huarte, sin embargo, pertenece a un grupo no reconocido de viviendas experimentales de gran formato, que aportaban -en entornos de vida socio-familiar no convencionales- una complejidad funcional, espacial y de relaciones interpersonales que la vivienda mínima no tenía. La Casa Huarte supuso un punto de inflexión en la carrera de Corrales y Molezún, culminando una primera etapa donde se concentraron sus obras más destacadas: Instituto en Herrera de Pisuerga (1956), Residencia de Miraflores (1958) y Pabellón de Bruselas, en sus versiones belga (1958) y española (1959). El proyecto de la Casa Huarte adelantó estrategias que aplicarían en proyectos posteriores -dinamismo del plano horizontal, visuales diagonales, entrada tangencial- y culminó la evolución de un tipo de vivienda que Corrales y Molezún comenzaron a investigar diez años antes. Entre 1956 y 1961 proyectaron cuatro viviendas (Casa Remírez Escudero, Casa Álvarez Mon, Casa Gómez Acebo y Casa Cela) que anticiparon soluciones y situaciones presentes y perfeccionadas en la Casa Huarte. Corrales aseguraba que si la vida es contradictoria la arquitectura también debería serlo. La Casa Huarte es compleja y contradictoria funcional y espacialmente, homogeneizada por una imagen exterior rotunda y atractiva de juegos de volúmenes maclados. El proyecto se muestra así de contundente detrás de habilidosas maniobras tectónicas que ocultan las muchas complejidades y contradicciones aparentemente inapreciables. Estas maniobras confunden la imagen que de la casa se tiene. Debajo de su manto cerámico de reminiscencias vernáculas - híbrido de casa castellana y arquitectura nórdica- se esconde una obra de arquitectura avanzada tecnológicamente. La tesis se desarrolla en cuatro apartados denominados procesos, por lo que tienen de secuencia en el desarrollo de la investigación. Estos procesos son: proceso descriptivo, proceso analítico, proceso interpretativo y proceso poético. Después del necesario e introductorio proceso descriptivo, el cuerpo central de la tesis -que contiene los procesos analítico, interpretativo y poético- sigue un guión marcado por la defensa de la categoría experimental de la Casa Huarte. Se han tratado los conceptos más característicos de la vivienda, desde los más generales a los más específicos divididos en cuatro grupos: Composición, volumen y espacio; El patio como lugar; El jardín: horizonte construido; Domesticidad del mundo interior; y Euritmia: materia y espíritu Molezún aseguraba que para entender una obra de arquitectura había que dibujarla. La Casa Huarte ha sido redibujada en sus tres etapas fundamentales: el proyecto de ejecución (marzo 1965), la casa acabada (noviembre 1966) y el estado actual (2012). El estudio y análisis se centra en la casa construida, por ser la realidad tridimensional en que el proyecto se nos manifiesta. La documentación gráfica del estado actual de la vivienda es inédita y ha sido posible gracias a múltiples inspecciones de la Casa Huarte en visitas facilitadas por las hijas de Jesús Huarte, actuales propietarias de la vivienda. Esta documentación nos permite constatar las alteraciones sobre la obra construida y conocer que modificaciones serían necesarias para recuperar el estado original de la casa. La Casa Huarte es una obra singular, una de las cinco viviendas unifamiliares pertenecientes a la Arquitectura del Movimiento Moderno en España y Portugal de mayor interés registrada por el Docomomo Internacional. Su futuro es incierto, se encuentra deshabitada y en venta. La familia Huarte ha cumplido con creces la misión de conservar su patrimonio. Es pertinente reivindicar su vigencia como obra de referencia de la arquitectura española del siglo XX, y, de esa manera, evitar que caiga en el olvido y el abandono. ABSTRACT The Huarte House (1966) will be analysed as a domestic experiment – that is how the Huarte’s conceived it, putting their faith in the architects – that synthesized the principles from the projects of the first phase of the work of Jose Antonio Corrales (1921-2010) and Ramón Vázquez Molezún (1922-1993): built landscape, modified topography, heavy and rooted base, light, floating roof and abstraction in composition. The experimental house of the 20th century was associated with small nuclear families of at the most a couple and two children. The Huarte House belongs to a group of non-recognised experimental houses of a larger size -and more unconventional familial settings- that lent themselves to greater functional, spatial and interpersonal complexity than their smaller counterparts. The Huarte House represented a turning point in the careers of Corrales and Molezún, capping a first phase that includes their most prominent work: the Institute at Herrera de Pisuerga (1965), the Residence at Miraflores (1958) and the Brussels Pavilion, in its Belgian (1958) and Spanish (1959) version. The project for the Huarte house anticipated strategies which they would apply to later projects: dynamism of the horizontal plane, diagonal visuals, and tangential entrances. It was also the culmination of the evolution of a type of house that Corrales and Molezún had started to investigate ten years earlier. Between 1956 and 1961 they designed four houses (Ramírez Escudero House, Álvarez Mon House, Gómez Acebo House and Cela House) that anticipated the solutions applied and perfected in the Huarte House. Corrales believed that if life was contradictory architecture should be so too. The Huarte House is complex and contradictory. Corrales and Molezún homogenised the project under a bold and attractive image of intersecting volumes. The project appears emphatic thanks to skilful tectonic manoeuvres that conceal the many complexities and contradictions so that they become imperceptible. These manoeuvres confound the image of the house. Under its ceramic blanket of vernacular reminiscences (a mixture of Castilian house and Nordic architecture) lies a technologically advanced piece of architecture. The thesis is organised in four chapters named ‘processes’ in reference to their sequence in the development of the research. These processes are: descriptive process, analytic process, interpretative process and poetic process. After the necessary and introductory descriptive process, the main body of the thesis, which encompasses the analytical, interpretative and poetic processes, develops the argument for incorporating the Huarte House into the experimental category. The thesis addresses the characteristic concepts of a house, from the general to the more specific, divided in four groups: composition, volume and space; the patio: architecture and landscape; the garden: building the horizon and eurythmy: spirit and matter. Molezún was convinced that to get to know a work of architecture it was necessary to draw it. The Huarte House is redrawn in its three main phases: the executive project (march 1965), the finished house (november 1966) and its actual state (2012). The study and analysis centers on the built house, as the actual tri-dimensional manifestation of the project. The graphic documentation of the present state of the house has never been published before and has been made possible by numerous visits to the House facilitated by Jesus Huarte’s daughters who are the current owners. This documentation allows us to determine any alterations of the constructed work and derive the necessary modifications to bring the house back to its original state. The Huarte House is a unique work, one of five single family homes registered by the International Docomomo. Its future is uncertain. It is currently uninhabited and up for sale. The Huarte family has more than delivered on the mission to safeguard its patrimony. It is important to defend its place as a key work of Spanish architecture of the 20th century and so avoid it being forgotten and abandoned.

A general framework to testing the effect of transport policy measures to achieve a modal shift: a sequental hybrid model

In order to achieve to minimize car-based trips, transport planners have been particularly interested in understanding the factors that explain modal choices. In the transport modelling literature there has been an increasing awareness that socioeconomic attributes and quantitative variables are not sufficient to characterize travelers and forecast their travel behavior. Recent studies have also recognized that users? social interactions and land use patterns influence travel behavior, especially when changes to transport systems are introduced, but links between international and Spanish perspectives are rarely deal. In this paper, factorial and path analyses through a Multiple-Indicator Multiple-Cause (MIMIC) model are used to understand and describe the relationship between the different psychological and environmental constructs with social influence and socioeconomic variables. The MIMIC model generates Latent Variables (LVs) to be incorporated sequentially into Discrete Choice Models (DCM) where the levels of service and cost attributes of travel modes are also included directly to measure the effect of the transport policies that have been introduced in Madrid during the last three years in the context of the economic crisis. The data used for this paper are collected from a two panel smartphone-based survey (n=255 and 190 respondents, respectively) of Madrid.

Win-win transport strategies: searching for sinergies

In order to achieve to minimize car-based trips, transport planners have been particularly interested in understanding the factors that explain modal choices. In the transport modelling literature there has been an increasing awareness that socioeconomic attributes and quantitative variables are not sufficient to characterize travelers and forecast their travel behavior. Recent studies have also recognized that users? social interactions and land use patterns influence travel behavior, especially when changes to transport systems are introduced, but links between international and Spanish perspectives are rarely deal. In this paper, factorial and path analyses through a Multiple-Indicator Multiple-Cause (MIMIC) model are used to understand and describe the relationship between the different psychological and environmental constructs with social influence and socioeconomic variables. The MIMIC model generates Latent Variables (LVs) to be incorporated sequentially into Discrete Choice Models (DCM) where the levels of service and cost attributes of travel modes are also included directly to measure the effect of the transport policies that have been introduced in Madrid during the last three years in the context of the economic crisis. The data used for this paper are collected from a two panel smartphone-based survey (n=255 and 190 respondents, respectively) of Madrid.

Una architettura come me. Sobre la Arquitectura de Ignacio Vicens y José Antonio Ramos = Una architettura come me. On the Architecture of Ignacio Vicens y José Antonio Ramos

The architecture of Vicens and Ramos holds a privileged position within the Spanish architecture of the last few years, due to their outstanding resolution of the architectural project. Each project has posed a creative challenge for them that has resulted in unique works, with great pedagogical value for other architects. In this monograph, a selection of their most emblematic work is shown, including Las Matas, Faculty at the University of Navarra, the Church at Rivas and Coliseum of the Three Cultures among others. The project documentation is exceptionally thorough, with plans and images of all sections, from many angles. There is also an interview with Ignacio Vicens, writings from friends and colleagues, and images that reflect the professional and human aspects of this architect and professor at the Architecture School in Madrid. In English and Spanish, this book is of a seriously high standard.

Cadena de valor de papas nativas (Solanum andigenum sp.) en la provincia de Jauja, Perú

La Asamblea General de la ONU, a solicitud del gobierno peruano, declara en el año 2008 el Año Internacional de la Papa, (AIP). Desde el año 2005, el gobierno peruano ha puesto en marcha estrategias en torno a la importancia de la papa, como la declaración del 30 de Mayo como el Día Nacional de la Papa. El año 2014 es declarado por la FAO, (Food and Agriculture Organization of the United Nations), Año Internacional de la Agricultura Familiar, con un enfoque compartido por esta Tesis Doctoral en el apoyo a la familia campesina peruana. El gobierno peruano utiliza las cadenas de valor como una estrategia de promoción de desarrollo sostenible, que ha permitido contribuir a la inclusión social y económica de productores pobres de zonas alto andinas, como las localizadas en la mancomunidad municipal del Yacus, (MMY), provincia de Jauja, departamento de Junín. Esta estrategia, en la que el mercado incorpora a los pequeños agricultores de las zonas altas de los Andes, (que disponen de recursos económicos muy bajos), en procesos productivos rentables, implica una serie de cambios a realizar, como la transformación de los patrones de producción tradicional hacia aquellos productos o servicios que tienen demanda en el mercado, o la variación de la mentalidad del agricultor pequeño hacia una concepción empresarial de su producción. (Fabián, 2013). Por otra parte, la sostenibilidad de las cadenas de valor depende del eslabón más débil, lo que obliga a conocer la situación de todos los eslabones para poder integrar y reforzar la cadena. Se requiere un sistema de transparencia adecuado que facilite el flujo de la información entre los distintos eslabones. (Briz et al., 2012). Además, el establecimiento de la cadena de valor debe hacerse con cuidado, ya que la eficacia y supervivencia de las empresas están cada vez más ligadas a la cadena de valor a la que pertenece y a la coordinación de la misma. (Briz, 2011). En esta situación, adquiere importancia el estudio de la cadena de valor de la papa nativa, para una vez establecidas sus características, poder determinar la viabilidad o no de una cadena de valor de este producto que repercuta parte de la riqueza generada en los pequeños agricultores alto andinos, e incluso, de su extensión hasta España. Existen estudios sobre las papas nativas, realizadas por diferentes universidades de distintos países, e incluso, de diferentes continentes. Sin embargo, la mayoría de los estudios se centran en la mejora de la producción de la papa nativa. La novedad de la investigación realizada en la presente Tesis Doctoral radica en el estudio de la viabilidad de la comercialización de la papa nativa, mediante el establecimiento de una cadena de valor que se inicie en la provincia de Jauja, Perú, y finalice tanto en los mercados peruanos de las regiones de Junín y Lima, como en España. El objetivo planteado en esta investigación es la mejora de las condiciones económicas y sociales de las comunidades agrícolas de la provincia de Jauja en el Perú, así como fomentar su desarrollo tecnológico e industrial, mediante el fomento de la cadena de valor de la papa nativa y sus derivados. Se establecen como objetivos específicos la caracterización de los eslabones de la cadena de valor de la papa nativa y sus derivados en la provincia de Jauja del Perú y en España, de manera que se determine el valor agregado en los mismos; el fortalecimiento de las organizaciones de productores de papas nativas para la comercialización de sus producciones y para el fomento de la cultura empresarial; y el desarrollo de una cadena de comercialización papas nativas y sus derivados con origen en la Provincia de Jauja, Perú, y que finalice en España, con la venta al consumidor español. Para alcanzar estos objetivos la metodología utilizada es la cadena de valor agroalimentaria, utilizando como herramientas de análisis el análisis DAFO de la cadena de valor de la papa nativa. Las fuentes de información primarias utilizadas proceden en parte del proyecto de cooperación de UPM, “Mejora de la cadena de valor de la patata andina como impulso al desarrollo rural. Caso de tres Comunidades Campesinas en la Provincia de Jauja del Perú”, en el que participó el doctorando, y en parte proceden de la batería de encuestas específicamente diseñadas para los diferentes eslabones de la cadena de valor de la papa nativa. Las fuentes de información secundarias proceden de artículos académicos publicados, de artículos publicados por revistas especializadas del sector y de informes realizados por diferentes instituciones gubernamentales, tanto españolas como peruanas. Las conclusiones de la investigación son las siguientes. La creación de la mancomunidad del Yacus ha beneficiado a los pequeños agricultores. Estos consiguen mejores condiciones de venta y mejores precios para sus productos, lo que repercute en la mejora de sus condiciones de vida. Estas mejoras en las condiciones de venta de los productos se deben a su pertenencia a una cadena de valor de papa nativa que está funcionando de forma eficaz. Las empresas consideradas para constituir la cadena de valor han mostrado interés por formar parte de ella: los campesinos para obtener mejores precios por sus productos y unas mejores condiciones de venta; los distribuidores para asegurarse una calidad determinada de unas variedades fijas de papa nativa; la industria transformadora por disponer de un suministro de producto adecuado al derivado de papa nativa correspondiente, (hojuelas, tunta, etc.); las empresas exportadoras para tener suministro garantizado de los productos que ellos requieren en los volúmenes adecuados. Es una situación ventajosa para todas las empresas participantes. A pesar de trabajar con un producto tradicional, la cadena de valor de la papa nativa presenta innovación en los productos comercializados, tanto en la papa nativa fresca como en sus derivados, en los formatos de los productos, en la red de distribución, en las instituciones peruanas y en el consumidor final. Se percibe una demanda de papa nativa y de sus productos derivados en aquellos países donde existen comunidades de latinoamericanos que han emigrado de sus países de origen. España está entre los países que han acogido a un importante número de personas de origen latinoamericano. A pesar de la fuerte crisis económica sufrida por España, que ha llevado consigo la vuelta a sus países de origen de parte de su comunidad latinoamericana, el tamaño de esta población sigue siendo importante. Esta población demanda productos originarios de sus propios países, y los consumirían de forma frecuente si los precios son adecuados a su capacidad de consumo. El precio de venta de la papa nativa y sus derivados en España es de gran importancia. La importación de estos productos desde Perú hace que este eleve a niveles que le resta competitividad, en especial en la papa fresca. Se aconseja la búsqueda de empresas que puedan adaptar la producción de la papa fresca de forma local, y mantener para los derivados la exportación directa a España. Las preferencias de los consumidores peruanos y españoles en cuanto a formatos y marcas se refieren no son coincidentes. De las encuestas realizadas, se concluye que no puede seguirse la misma estrategia de marketing en ambos países, debiéndose diferenciar los formatos de los paquetes de la papa nativa y de sus derivados en España y en Perú, para así lograr llegar a los consumidores potenciales de ambos países. ABSTRACT At the request of the Peruvian government, the UN General Assembly declared the International Year of the Potato in 2008. Since 2005, the Peruvian government has implemented strategies around the importance of the potato, as the declaration of the 30th of May as the National Day of the Potato. FAO (Food and Agriculture Organization of the United Nations) has declared 2014 as the International Year of Family Farming, with an approach shared by this Ph.D. dissertation about the Peruvian peasant family. The Peruvian government uses value chains as a strategy to promote sustainable development, which has allowed to contribute to the social and economic inclusion of poor farmers in the high Andean regions as those located in the municipal commonwealth of Yacus (MMY) province of Jauja, department of Junín. This strategy, which incorporates small farmers in the high Andean regions, (who have very low income), to the market with profitable production processes, implies a number of changes that should take place, such as changing patterns of traditional production to those products or services that are in demand in the market, or changes in the mentality of the small farmer into a concept of production business. (Fabián, 2013). Moreover, the sustainability of value chains depends on the weakest link, which demands a knowledge of the status of all the links, in order to integrate and strengthen the chain. It is required an adequate transparency to facilitate the flow of information between the various actors. (Briz et al., 2012). Furthermore, the establishment of the value chain should be done carefully, since the effectiveness and the survival of the businesses are increasingly linked to the value chain where the firm is included and to its coordination. (Briz, 2011). In this situation, it becomes important to study the value chain of the native potato, once we establish its features, to be able to determine the feasibility or not of a value chain of this product, which has an impact of the generated wealth in small farms of the high Andean regions, and even the extension of this value chain to Spain. There are studies on native potatoes, made by different universities in several countries and even in more than one continent. However, most studies focus on improving the production of native potato. The originality of the research conducted in this Ph.D. dissertation is the study of the feasibility of commercialization of native potato, by the creation of a value chain that starts in the province of Jauja, Perú, and ends both in Peruvian markets in the region of Lima, and in Spain. The main goal of this research is to improve the economic and social conditions of farming communities in the province of Jauja in Perú, while promoting its technological and industrial development, by the establishment of a value chain of the native potato and derivatives. The specific objectives of the research are the characterization of the links in the value chain of the native potato and its derivatives in the province of Jauja, (Perú) and in Spain, in order to determine the added value; the strengthening of organizations of native potato producers, to commercialize their products and the promotion of enterprise culture; and the development of a chain to market native potato and its derivatives, with its origin in the province of Jauja, (Perú), and its end in Spain, with the sale to the Spanish consumer. In order to achieve these objectives, the used methodology is the agrifood value chain, using as a tool to analysis it the SWOT analysis of the value chain of the native potato. The primary sources of information used in the research come partly from UPM cooperation project, "Improving the value chain of Andean potato as a boost to rural development. Case Three Rural Communities in the Province of Jauja, (Perú)", in which the Ph.D. student was involved, and partly from the surveys, which were specifically designed for the different links of the value chain of the native potato. The secondary sources of information come from academic articles, from articles published by magazines of the industry, and from reports of several government institutions, both Spanish and Peruvian. The conclusions of the research are as follows. The creation of the commonwealth of Yacus has benefited small farmers. They get better sales conditions and better prices for their products, which results in the improvement of their living conditions. These improvements are due to a value chain of native potato which is working effectively. All the firms invited to constitute the value chain have shown interest in being part of it: the farmers to get better prices for their products and better sale conditions; the distributors to ensure a certain quality of fixed varieties of native potato, the processing industry in order to have an adequate supply of product to the corresponding derivative of native potato (chips, “tunta”, etc.); exporting firms to have a guaranteed supply of the products that they require with the right volumes. It's a win-win situation for all participating companies. Despite being a traditional product, the value chain of the native potato presents innovation in marketed products, (both fresh native potato and its derivatives), in the formats of products, in the distribution network, in Peruvian institutions and in relation with the consumer. There is a perceived demand of native potato and its products in countries where communities of Latin Americans have settled down. Spain is among the countries that have received a significant number of people from Latin America. Despite the strong economic crisis suffered by Spain, which has lead to a return to their home countries of part of the Latin American community, the size of this population is still considerable. This population demands products from their own countries, and they frequently consume them if the prices are suitable to their standard of living. The selling price of the native potato and its derivatives in Spain is of great importance. The import of these products from Perú makes the prices rise to levels that reduce competitiveness, especially in fresh native potatoes. It is advised to look for companies which can adapt the fresh potato production in our country, and keep direct export to Spain for the derivatives products. The preferences of Peruvian and Spanish consumers in terms of formats and brands are not the same. The surveys concluded that the same marketing strategy cannot be followed in both countries. Packet formats of native potato and its derivatives should be differentiated in Spain and Perú, in order to reach the potential consumers of both countries.

Assessment methodology applied to demand measures to change urban mobility behavior

In order to minimize car-based trips, transport planners have been particularly interested in understanding the factors that explain modal choices. Transport modelling literature has been increasingly aware that socioeconomic attributes and quantitative variables are not sufficient to characterize travelers and forecast their travel behavior. Recent studies have also recognized that users’ social interactions and land use patterns influence travel behavior, especially when changes to transport systems are introduced; but links between international and Spanish perspectives are rarely dealt with. The overall objective of the thesis is to develop a stepped methodology that integrate diverse perspectives to evaluate the willingness to change patterns of urban mobility in Madrid, based on four steps: (1st) analysis of causal relationships between both objective and subjective personal variables, and travel behavior to capture pro-car and pro-public transport intentions; (2nd) exploring the potential influence of individual trip characteristics and social influence variables on transport mode choice; (3rd) identifying built environment dimensions on travel behavior; and (4th) exploring the potential influence on transport mode choice of extrinsic characteristics of individual trip using panel data, land use variables using spatial characteristics and social influence variables. The data used for this thesis have been collected from a two panel smartphone-based survey (n=255 and 190 respondents, respectively) carried out in Madrid. Although the steps above are mainly methodological, the application to the area of Madrid allows deriving important results that can be directly used to forecast travel demand and to evaluate the benefits of specific policies that might be implemented in the area. The results demonstrated, respectively: (1st) transport policy actions are more likely to be effective when pro-car intention has been disrupted first; (2nd) the consideration of “helped” and “voluntary” users as tested here could have a positive and negative impact, respectively, on the use of public transport; (3rd) the importance of density, design, diversity and accessibility underlying dimensions responsible for land use variables; and (4th) there are clearly different types of combinations of social interactions, land use and time frame on travel behavior studies. Finally, with the objective to study the impact of demand measures to change urban mobility behavior, those previous results have been considered in a unique way, a hybrid discrete choice model has been used on a 5th step. Then it can be concluded that urban mobility behavior is not only ruled by the maximum utility criterion, but also by a strong psychological-environment concept, developed without the mediation of cognitive processes during choice, i.e., many people using public transport on their way to work do not do it for utilitarian reasons, but because no other choice is available. Regarding built environment dimensions, the more diversity place of residence, the more difficult the use of public transport or walking.

Generating segmental foreign accent

For most of us, speaking in a non-native language involves deviating to some extent from native pronunciation norms. However, the detailed basis for foreign accent (FA) remains elusive, in part due to methodological challenges in isolating segmental from suprasegmental factors. The current study examines the role of segmental features in conveying FA through the use of a generative approach in which accent is localised to single consonantal segments. Three techniques are evaluated: the first requires a highly-proficiency bilingual to produce words with isolated accented segments; the second uses cross-splicing of context-dependent consonants from the non-native language into native words; the third employs hidden Markov model synthesis to blend voice models for both languages. Using English and Spanish as the native/non-native languages respectively, listener cohorts from both languages identified words and rated their degree of FA. All techniques were capable of generating accented words, but to differing degrees. Naturally-produced speech led to the strongest FA ratings and synthetic speech the weakest, which we interpret as the outcome of over-smoothing. Nevertheless, the flexibility offered by synthesising localised accent encourages further development of the method.

Certificación energética mediante la herramienta CE3X y rehabilitación energética de una vivienda unifamiliar

El siguiente proyecto lleva a cabo un estudio sobre la eficiencia energética en una vivienda unifamiliar basándose en la legislación actual europea y española. Para empezar se obtendrá la calificación energética del inmueble mediante el programa informático de la opción simplificada CE3X. A continuación se proporcionará un estudio con las medidas de mejora más adecuadas para mejorar la eficiencia energética de la vivienda, las medidas que se llevarán a cabo serán: la mejora de la envolvente térmica, mejorando el aislamiento de la fachada y la sustitución de ventanas, la instalación de una caldera de biomasa y la instalación de un sistema de colectores solares para cubrir la demanda de calefacción y ACS. Para finalizar se realiza un presupuesto de las medidas de mejoras propuestas, así como un análisis económico y una planificación y programación temporal. ABSTRACT The object of this Project is to carry out a study on the energy efficiency of a single family home in accordance with the present European and Spanish legislation. The first step is to obtain the home energy efficiency by means of a CE3X computer program. The second step is a study with the most appropriate improvement measures is provided in order to improve the home energy efficiency. The measures to be carried out will be as follows: improving the heat insulation, as well as, the facade heat insulation and replacing the windows, installing a biomass heating system and a solar collector in order to satisfy the heating and domestic hot water (DHW) demands. Finally a budget with the proposed improvement measures is made as well as a financial analysis and a time planning and programming of the project.

Un estudio del adjetivo en un corpus de textos escritos en inglés y español pertenecientes al discurso de especialidad de las Tecnologías de la Información y las Comunicaciones

Esta investigación se enmarca dentro de los denominados lenguajes de especialidad que para esta tesis será el de las Tecnologías de la Información y la Comunicación (TIC). De todos los aspectos relacionados con el estudio de estos lenguajes que pudieran tener interés lingüístico ha primado el análisis del componente terminológico. Tradicionalmente la conceptualización de un campo del saber se representaba mayoritariamente a través del elemento nominal, así lo defiende la Teoría General de la Terminología (Wüster, 1968). Tanto la lexicología como la lexicografía han aportado importantes contribuciones a los estudios terminológicos para la identificación del componente léxico a través del cual se transmite la información especializada. No obstante esos primeros estudios terminológicos que apuntaban al sustantivo como elmentos denominativo-conceptual, otras teorías más recientes, entre las que destacamos la Teoría Comunicativa de la Terminología (Cabré, 1999) identifican otras estructuras morfosintácticas integradas por otros elementos no nominales portadores igualmente de esa carga conceptual. A partir de esta consideración, hemos seleccionado para este estudio el adjetivo relacional en tanto que representa otra categoría gramatical distinta al sustantivo y mantiene un vínculo con éste debido a su procedencia. Todo lo cual puede suscitar cierto interés terminológico. A través de esta investigación, nos hemos propuesto demostrar las siguientes hipótesis: 1. El adjetivo relacional aporta contenido especializado en su asociación con el componente nominal. 2. El adjetivo relacional es portador de un valor semántico que hace posible identificar con más precisión la relación conceptual de los elementos -adjetivo y sustantivo - de la combinación léxica resultante, especialmente en algunas formaciones ambiguas. 3. El adjetivo relacional, como modificador natural del sustantivo al que acompaña, podría imponer cierta restricción en sus combinaciones y, por tanto, hacer una selección discriminada de los integrantes de la combinación léxica especializada. Teniendo en cuenta las anteriores hipótesis, esta investigación ha delimitado y caracterizado el segmento léxico objeto de estudio: la ‘combinación léxica especializada (CLE)’ formalmente representada por la estructura sintáctica [adjR+n], en donde adjR es el adjetivo y n el sustantivo al que acompaña. De igual forma hemos descrito el marco teórico desde el que abordar nuestro análisis. Se trata de la teoría del Lexicón Generatvio (LG) y de la representación semántica (Pustojovsky, 1995) que propone como explicación de la generación de significados. Hemos analizado las distintas estructuras de representación léxica y en especial la estructura qualia a través de la cual hemos identificado la relación semántica que mantienen los dos ítems léxicos [adjR+n] de la estructura sintáctica de nuestro estudio. El estudio semántico de las dos piezas léxicas ha permitido, además, comprobar el valor denominativo del adjetivo en la combinación. Ha sido necesario elaborar un corpus de textos escritos en inglés y español pertenecientes al discurso de especialidad de las TIC. Este material ha sido procesado para nuestros fines utilizando distintas herramientas electrónicas. Se ha hecho uso de lexicones electrónicos, diccionarios online generales y de especialidad y corpus de referencia online, estos últimos para poder eventualmente validad nuetros datos. Asimismo se han utilizado motores de búsqueda, entre ellos WordNet Search 3.1, para obtener la información semántica de nuestros elementos léxicos. Nuestras conclusiones han corroborado las hipótesis que se planteaban en esta tesis, en especial la referente al valor denominativo-conceptual del adjetivo relacional el cual, junto con el sustantivo al que acompaña, forma parte de la representación cognitiva del lenguaje de especialidad de las TIC. Como continuación a este estudio se proponen sugerencias sobre líneas futuras de investigación así como el diseño de herramientas informáticas que pudieran incorporar estos datos semánticos como complemento de los ítems léxicos dotados de valor denominativo-conceptual. ABSTRACT This research falls within the field of the so-called Specialized Languages which for the purpose of this study is the Information and Communication Technology (ICT) discourse. Considering their several distinguishing features terminology concentrates our interest from the point of view of linguistics. It is broadly assumed that terms represent concepts of a subject field. For the classical view of terminology (Wüster, 1968) these terms are formally represented by nouns. Both lexicology and terminology have made significant contributions to the study of terms. Later research as well as other theories on Terminology such as the Communicative Theory of Terminology (Cabré, 1993) have shown that other lexical units can also represent knowledge organization. On these bases, we have focused our research on the relational adjective which represents a functional unit different from a noun while still connected to the noun by means of its nominal root. This may have a potential terminological interest. Therefore the present research is based on the next hypotheses: 1. The relational adjective conveys specialized information when combined with the noun. 2. The relational adjective has a semantic meaning which helps understand the conceptual relationship between the adjective and the noun being modified and disambiguate certain senses of the resulting lexical combination. 3. The relational adjective may impose some restrictions when choosing the nouns it modifies. Considering the above hypotheses, this study has identified and described a multi-word lexical unit pattern [Radj+n] referred to as a Specialized Lexical Combination (SLC) linguistically realized by a relational adjective, Radj, and a noun, n. The analysis of such a syntactic pattern is addressed from the framework of the Generative Lexicon (Pustojovsky, 1995). Such theory provides several levels of semantic description which help lexical decomposition performed generatively. These levels of semantic representation are connected through generative operations or generative devices which account for the compositional interpretation of any linguistic utterance in a given context. This study analyses these different levels and focuses on one of them, i.e. the qualia structure since it may encode the conceptual meaning of the syntactic pattern [Radj+n]. The semantic study of these two lexical items has ultimately confirmed the conceptual meaning of the relational adjective. A corpus made of online ICT articles from magazines written in English and Spanish – some being their translations - has been used for the word extraction. For this purpose some word processing software packages have been employed. Moreover online general language and specialized language dictionaries have been consulted. Search engines, namely WordNet Search 3.1, have been also exploited to find the semantic information of our lexical units. Online reference corpora in English and Spanish have been used for a contrastive analysis of our data. Finally our conclusions have confirmed our initial hypotheses, i.e. relational adjectives are specialized lexical units which together with the nouns are part of the knowledge representation of the ICT subject field. Proposals for new research have been made together with some other suggestions for the design of computer applications to visually show the conceptual meaning of certain lexical units.