Composition of bottom sediments from the anoxic Mogil'noe Lake, Kil'din Island (Barents Sea)

In summer 2006 integrated geological, geochemical, hydrological, and hydrochemical studies were carried out in the relict anoxic Mogil'noe Lake (down to 16 m depths) located in the Kil'din Island in the Barents Sea. Chemical and grain size compositions of bottom sediments from the lake (permanently anoxic basin) and from the Baltic Sea deeps (periodically anoxic basins) were compared. Vertical location of the hydrogen sulfide layer boundary in the lake (9-11 m depths) was practically the same from 1974 up to now. Concentrations of suspended matter in the lake in June and July 2006 appeared to be close to its summer concentrations in seawater of the open Baltic Sea. Muds from the Mogil'noe Lake compared to those of the Baltic Sea deeps are characterized by fluid and flake consistency and by pronounced admixtures of sandy and silty fractions (probably of eolic origin). Lacustrine mud contains much plant remains; iron sulfides and vivianite were also found. Concentrations of 22 elements determined in lacustrine bottom sediments were of the same levels as those found here 33 years ago. Concentrations also appeared to be close to those in corresponding grain size types of bottom sediments in the Baltic Sea. Low C_org/N values (aver. 5.0) in muds of the Mogil'noe Lake compared to ones for muds of the Baltic Sea deeps (aver. 10) evidence considerable planktogenic component in organic matter composition of the lacustrine muds. No indications were reveled for anthropogenic contaminations of the lacustrine bottom sediments with toxic metals.

(Table 1) Composition of organic matter in bottom sediments from the Kuril-Kamchatka Trench

From results of analyses of sediment samples collected on a profile crossing the Kuril-Kamchatka Trench distribution of organic D, N. carbohydrates, lipids and humic substances was established, as well as nature of their relationship with amorphous silica and clay fraction. Sum of the main biochemical groups of organic matter in the surface layer of sediments (0-1 cm) from the Kuril-Kamchatka Trench amounts to about 15%; neogenetic forms not encountered in living organisms make up 85% of organic matter. Among such forms 26% comprise humic substances formed during initial stages of polymerization of decomposition products of biochemical macromolecules.

Stable isotopic composition of bottom water and benthic foraminifera from Hakon Mosby Mud Vulcano

To investigate the use of benthic foraminifera as a means to document ancient methane release, we determined the stable isotopic composition of tests of live (Rose Bengal stained) and dead specimens of epibenthic Fontbotia wuellerstorfi, preferentially used in paleoceanographic reconstructions, and of endobenthic high-latitude Cassidulina neoteretis and Cassidulina reniforme from a cold methane-venting seep off northern Norway. We collected foraminiferal tests from three push cores and nine multiple cores obtained with a remotely operated vehicle and a video-guided multiple corer, respectively. All sampled sites except one control site are situated at the Håkon Mosby mud volcano (HMMV) on the Barents Sea continental slope in 1250 m water depth. At the HMMV in areas densely populated by pogonophoran tube worms, d13C values of cytoplasm-containing epibenthic F. wuellerstorfi are by up to 4.4 per mil lower than at control site, thus representing the lowest values hitherto reported for this species. Live C. neoteretis and C. reniforme reach d13C values of -7.5 and -5.5 per mil Vienna Pee Dee Belemnite (VPDB), respectively, whereas d13C values of their empty tests are higher by 4 per mil and 3 per mil. However, d13C values of empty tests are never lower than those of stained specimens, although they are still lower than empty tests from the control site. This indicates that authigenic calcite precipitates at or below the sediment surface are not significantly influencing the stable isotopic composition of foraminiferal shells. The comparatively high d13C results rather from upward convection of pore water and fluid mud during active methane venting phases at these sites. These processes mingle tests just recently calcified with older ones secreted at intermittent times of less or no methane discharge. Since cytoplasm-containing specimens of suspension feeder F. wuellerstorfi are almost exclusively found attached to pogonophores, which protrude up to 3 cm above the sediment, and d13C values of bottom-water-dissolved inorganic carbon (DIC) are not significantly depleted, we conclude that low test d13C values of F. wuellerstorfi are the result of incorporation of heavily 13C-depleted methanotrophic biomass that these specimens feed on rather than because of low bottom water d13CDIC. Alternatively, the pogonophores, which are rooted at depth in the upper sediment column, may serve as a conduit for depleted d13CDIC that ultimately influences the calcification process of F. wuellerstorfi attached to the pogonophoran tube well above the sediment/water interface. The lowest d13C of live specimens of the endobenthic C. neoteretis and C. reniforme are within the range of pore water d13CDIC values, which exceed those that could be due to organic matter decomposition, and thus, in fact, document active methane release in the sediment.

Radiolaria in the surface layer of bottom sediments from the northern sector of the Benguela upwelling

Quantitative data on radiolarian assemblages from the Benguela upwelling at 17-25°S were obtained from analysis of 18 bottom sediment samples. The maximum abundance of Radiolaria (20000-40000 individuals per 1 g of sediment) was determined in sediments of the open ocean at depth 2000-4100 m. Species of tropical zones dominate in the assemblages; however content of species of subpolar and moderate zones reaches considerable values. In shelf sediments at depth 60-160 m abundance of Radiolaria (up to 5000 ind./g) is greater than in sediments of the continental slope. In shelf assemblages species of subpolar and temperate zones dominate. A characteristic feature of the shelf upwelling assemblages of Radiolaria is expressed by predominance of Lithomelissa setosa (Joerg.) (up to 50-80% at 23-25°S). L. setosa is a common representative of radiolarian assemblages of subpolar and temperate regions of the World Ocean. It is presumably regarded as an eurybiont species. Probably, it propagates with subantarctic intermediate water masses from the circumantarctic area to the Benguela upwelling region where there are favorable living conditions: subsurface water temperature is not higher than 10°C and there are high concentrations of nutrients.

Characterizing the physical and chemical properties of a vermicompost filter bed

Vermicompost filtration is a new on-site waste treatment system. Consequently, little is known about the filter medium properties. The aim of this preliminary study was to quantify physical and compositional properties of vermicompost filter beds that had been used to treat domestic solid organic waste and wastewater. This paper presents the trials performed on pilot-scale reactors filled with vermicompost from a full-scale vermicompost filtration system. Household solid organic waste and raw wastewater at the rate of 130 L/m(2)/d was applied to the reactor bed surface over a four-month period. It was found that fresh casts laid on the bed surface had a BOD of 1290 mg/g VS while casts buried to a depth of 10 cm had a BOD of 605 mg/g VS. Below this depth there was little further biodegradation of earthworm casts despite cast ages of up to five years. Solid material in the reactor accounted for only 7-10% of the reactor volume. The total voidage comprised of large free-draining pores, which accounted for 15-20% of the reactor volume and 60-70% micropores, able to hold up water against gravity. It was shown that water could flow through the medium micropores and macropores following a wastewater application. The wastewater flow characteristics were modeled by a two-region model based on the Richards Equation, an equation used to describe porous spatially heterogeneous materials.

Highly sensitive temperature and strain sensors based on all-fiber 45°-TFG Lyot filter

We demonstrate highly sensitive temperature and strain sensors based on an all-fiber Lyot filter structure, which is formed by concatenating two 45°-TFGs (tilted fiber gratings) with a PM fiber cavity. The experiment results show the all-fiber 45°-TFG Lyot filter has very high sensitivity to strain and temperature. The 45°-TFG Lyot filters of two different cavity lengths (18cm and 40 cm) have been evaluated for temperature sensing by heating a section of the cavity from 10°C to 50°C. The experiment results have shown remarkably high temperature sensitivities of 0.616nm/°C for 18cm and 0.31nm/°C for 40cm long cavity filter, respectively. The 18cm long cavity filter has been subjected to strain variations up to around 550μ ε and the filter has exhibited strain sensitivities of 0.02499nm/μ ε and 0.012nm/μ ε for two straining situations, where its cavity middle section of 18cm and 9cm were stretched, respectively. © 2012 SPIE.

Analysis and improvement of performance in LCL filter-based PWM rectifier/inverter application using hybrid damping approach

A hybrid passive-active damping solution with improved system stability margin and enhanced dynamic performance is proposed for high power grid interactive converters. In grid connected active rectifier/inverter application, line side LCL filter improves the high frequency attenuation and makes the converter compatible with the stringent grid power quality regulations. Passive damping though offers a simple and reliable solution but it reduces overall converter efficiency. Active damping solutions do not increase the system losses but can guarantee the stable operation up to a certain speed of dynamic response which is limited by the maximum bandwidth of the current controller. This paper examines this limit and introduces a concept of hybrid passive-active damping solution with improved stability margin and high dynamic performance for line side LCL filter based active rectifier/inverter applications. A detailed design, analysis of the hybrid approach and trade-off between system losses and dynamic performance in grid connected applications are reported. Simulation and experimental results from a 10 kVA prototype demonstrate the effectiveness of the proposed solution. An analytical study on system stability and dynamic response with the variations of various controller and passive filter parameters is presented.

Soliton mode locking fiber laser with an all-fiber polarization interference filter

An erbium doped fiber ring laser achieving soliton mode locking by the use of an intra-cavity all-fiber polarization interference filter (AFPIF) has been demonstrated. To incorporate an AFPIF with relative narrow transmission bandwidth, the laser has produced clean soliton pulses of 1.2 ps duration at a repetition rate of 14.98 MHz with a polarization extinction ratio up to 25.7 dB. Moreover, we have demonstrated that the operating wavelength of the mode locking laser can be tuned over 20 nm range from 1545 to 1565 nm by thermally tuning the AFPIF cavity. © 2012 Optical Society of America.

Spectrum-, pulsewidth-, and wavelengthswitchable all-fiber mode-locked Yb laser with fiber based birefringent filter

We examined methods of controlling the pulse duration, spectral width and wavelength of the output from an all-fiber Yb laser mode-locked by carbon nanotubes. It is shown that a segment of polarization maintaining (PM) fiber inserted into a standard single mode fiber based laser cavity can function as a spectral selective filter. Adjustment of the length of the PM fiber from 1 to 2 m led to a corresponding variation in the pulse duration from 2 to 3.8 ps, the spectral bandwidth of the laser output changes from 0.15 to 1.26 nm. Laser output wavelength detuning within up to 5 nm was demonstrated with a fixed length of the PM fiber by adjustment of the polarization controller. © 2012 Optical Society of America.

High resolution demodulation platform for large capacity hybrid WDM/FDM microstructures sensing system assisted by tunable FP filter

In this paper we proposed a demodulation scheme based on tunable FP filter for the WDM/FDM sensing system of the microstructure mentioned in the previous work. Simulation is done to prove the feasibility of demodulating the microstructure with the tunable FP filter. The experiments result showed high consistence with the simulation. And with the help of the high speed FPGA module and a high resolution AD/DA card, the system has achieved a very high resolution, up to 2.5 pm, and wavelength ranges 1520nm to 1590 nm.

Follow-up of the sponge and asteroid populations at the station Larsen A south (PS69/724-1 and PS77/253-1), Antarctic Peninsula, between 2007 and 2011

Over 30% of the Antarctic continental shelf is permanently covered by floating ice shelves, providing aphotic conditions for a depauperate fauna sustained by laterally advected food. In much of the remaining Antarctic shallows (<300 m depth), seasonal sea-ice melting allows a patchy primary production supporting rich megabenthic communities dominated by glass sponges (Porifera, Hexactinellida). The catastrophic collapse of ice shelves due to rapid regional warming along the Antarctic Peninsula in recent decades has exposed over 23,000 km**2 of seafloor to local primary production. The response of the benthos to this unprecedented flux of food is, however, still unknown. In 2007, 12 years after disintegration of the Larsen A ice shelf, a first biological survey interpreted the presence of hexactinellids as remnants of a former under-ice fauna with deep-sea characteristics. Four years later, we revisited the original transect, finding 2- and 3-fold increases in glass sponge biomass and abundance, respectively, after only two favorable growth periods. Our findings, along with other long-term studies, suggest that Antarctic hexactinellids, locked in arrested growth for decades, may undergo boom-and-bust cycles, allowing them to quickly colonize new habitats. The cues triggering growth and reproduction in Antarctic glass sponges remain enigmatic.

Radiocarbon age of bottom sediments from the Yenisei Gulf and the Kara Sea

Sedimentation rates and bottom sediment ages were determined by 14C method in the Kara Sea and the Yenisei River marginal filter. Age of carbon supplied by the Yenisei River is estimated to be 6.9 ka. As supplied carbon mixes with young biogenic carbon under influence of plankton and benthos young carbon flux (planktogenic) sharply diminishes. This has been inferred from studies of organic matter in sedimentary traps deployed along sections from the Yenisei River mouth to 76°N. The major part (70-80%) of organic carbon in bottom sediments of the Kara and Laptev Seas is ancient (Holocene). Planktogenic part comprises only 20-30%. In the Central Arctic Basin percentage of planktogenic organic matter in bottom sediments is still lower, the major part being associated with supply of ancient terrigenous organic material of low nutritional value for organisms. Determinations of sedimentation rates and recent matter fluxes from sedimentary traps served as a basis for locating a sedimentary depocenter in the Yenisei River both for present time and for geological past. Regularities of variations of sediment matter fluxes in the marginal filter were studied.

(Table 2) Chemical composition of bottom sediments from Core AMK35-3452

During the last 25-30 ka a layer of pelagic sediments covering basement rocks was formed within the hydrothermal field located at 14°45'N (Logachev hydrothermal field). Composition of edaphogenic minerals from bottom sediments points to the fact that serpentinites or serpentinous abyssal rocks and gabbroids prevail among rock outcroppings within the hydrothermal field. Hydrothermal activity of the studied area extends over at least 25-30 ky. A sharp increase in hydrothermal activity took place at the boundary between Würm and Holocene. Intensive discharge of ore-bearing fluids persists up to present time.

(Table 1) Mineral phosphorus contents in bottom sediments and interstitial waters of the Southeast Atlantic

Concentrations of mineral phosphorus in interstitial waters from sediments of the Southeast Atlantic generally increases from the ocean bed to the continental slope and shelf. In diatomaceous oozes of the Southwest Africa shelf, phosphorus concentration in fresh interstitial waters reaches 2.5 mg/l in absence of phosphorite concretions and 0.1-0.7 mg/l in their presence. After prolonged storage of samples concentration of dissolved mineral phosphorus sometimes increases up to 7-8 mg/l. The key factor regulating phosphorus content of solid and liquid phases of unaltered sediments are content and composition of organic matter.