Tecnologie appropriate per la gestione delle georisorse nei paesi in via di sviluppo e nei paesi dell'America Latina. Creazione di una metodologia multi criteria per la valutazione dei progetti di sviluppo umano

Benessere delle popolazioni, gestione sostenibile delle risorse, povertà e degrado ambientale sono dei concetti fortemente connessi in un mondo in cui il 20% della popolazione mondiale consuma più del 75% delle risorse naturali. Sin dal 1992 al Summit della Terra a Rio de Janeiro si è affermato il forte legame tra tutela dell’ambiente e riduzione della povertà, ed è anche stata riconosciuta l’importanza di un ecosistema sano per condurre una vita dignitosa, specialmente nelle zone rurali povere dell’Africa, dell’Asia e dell’America Latina. La natura infatti, soprattutto per le popolazioni rurali, rappresenta un bene quotidiano e prezioso, una forma essenziale per la sussistenza ed una fonte primaria di reddito. Accanto a questa constatazione vi è anche la consapevolezza che negli ultimi decenni gli ecosistemi naturali si stanno degradando ad un ritmo impressionate, senza precedenti nella storia della specie umana: consumiamo le risorse più velocemente di quanto la Terra sia capace di rigenerarle e di “metabolizzare” i nostri scarti. Allo stesso modo aumenta la povertà: attualmente ci sono 1,2 miliardi di persone che vivono con meno di un dollaro al giorno, mentre circa metà della popolazione mondiale sopravvive con meno di due dollari al giorno (UN). La connessione tra povertà ed ambiente non dipende solamente dalla scarsità di risorse che rende più difficili le condizioni di vita, ma anche dalla gestione delle stesse risorse naturali. Infatti in molti paesi o luoghi dove le risorse non sono carenti la popolazione più povera non vi ha accesso per motivi politici, economici e sociali. Inoltre se si paragona l’impronta ecologica con una misura riconosciuta dello “sviluppo umano”, l’Indice dello Sviluppo Umano (HDI) delle Nazioni Unite (Cfr. Cap 2), il rapporto dimostra chiaramente che ciò che noi accettiamo generalmente come “alto sviluppo” è molto lontano dal concetto di sviluppo sostenibile accettato universalmente, in quanto i paesi cosiddetti “sviluppati” sono quelli con una maggior impronta ecologica. Se allora lo “sviluppo” mette sotto pressione gli ecosistemi, dal cui benessere dipende direttamente il benessere dell’uomo, allora vuol dire che il concetto di “sviluppo” deve essere rivisitato, perché ha come conseguenza non il benessere del pianeta e delle popolazioni, ma il degrado ambientale e l’accrescimento delle disuguaglianze sociali. Quindi da una parte vi è la “società occidentale”, che promuove l’avanzamento della tecnologia e dell’industrializzazione per la crescita economica, spremendo un ecosistema sempre più stanco ed esausto al fine di ottenere dei benefici solo per una ristretta fetta della popolazione mondiale che segue un modello di vita consumistico degradando l’ambiente e sommergendolo di rifiuti; dall’altra parte ci sono le famiglie di contadini rurali, i “moradores” delle favelas o delle periferie delle grandi metropoli del Sud del Mondo, i senza terra, gli immigrati delle baraccopoli, i “waste pickers” delle periferie di Bombay che sopravvivono raccattando rifiuti, i profughi di guerre fatte per il controllo delle risorse, gli sfollati ambientali, gli eco-rifugiati, che vivono sotto la soglia di povertà, senza accesso alle risorse primarie per la sopravvivenza. La gestione sostenibile dell’ambiente, il produrre reddito dalla valorizzazione diretta dell’ecosistema e l’accesso alle risorse naturali sono tra gli strumenti più efficaci per migliorare le condizioni di vita degli individui, strumenti che possono anche garantire la distribuzione della ricchezza costruendo una società più equa, in quanto le merci ed i servizi dell’ecosistema fungono da beni per le comunità. La corretta gestione dell’ambiente e delle risorse quindi è di estrema importanza per la lotta alla povertà ed in questo caso il ruolo e la responsabilità dei tecnici ambientali è cruciale. Il lavoro di ricerca qui presentato, partendo dall’analisi del problema della gestione delle risorse naturali e dal suo stretto legame con la povertà, rivisitando il concetto tradizionale di “sviluppo” secondo i nuovi filoni di pensiero, vuole suggerire soluzioni e tecnologie per la gestione sostenibile delle risorse naturali che abbiano come obiettivo il benessere delle popolazioni più povere e degli ecosistemi, proponendo inoltre un metodo valutativo per la scelta delle alternative, soluzioni o tecnologie più adeguate al contesto di intervento. Dopo l’analisi dello “stato del Pianeta” (Capitolo 1) e delle risorse, sia a livello globale che a livello regionale, il secondo Capitolo prende in esame il concetto di povertà, di Paese in Via di Sviluppo (PVS), il concetto di “sviluppo sostenibile” e i nuovi filoni di pensiero: dalla teoria della Decrescita, al concetto di Sviluppo Umano. Dalla presa di coscienza dei reali fabbisogni umani, dall’analisi dello stato dell’ambiente, della povertà e delle sue diverse facce nei vari paesi, e dalla presa di coscienza del fallimento dell’economia della crescita (oggi visibile più che mai) si può comprendere che la soluzione per sconfiggere la povertà, il degrado dell’ambiente, e raggiungere lo sviluppo umano, non è il consumismo, la produzione, e nemmeno il trasferimento della tecnologia e l’industrializzazione; ma il “piccolo e bello” (F. Schumacher, 1982), ovvero gli stili di vita semplici, la tutela degli ecosistemi, e a livello tecnologico le “tecnologie appropriate”. Ed è proprio alle Tecnologie Appropriate a cui sono dedicati i Capitoli successivi (Capitolo 4 e Capitolo 5). Queste sono tecnologie semplici, a basso impatto ambientale, a basso costo, facilmente gestibili dalle comunità, tecnologie che permettono alle popolazioni più povere di avere accesso alle risorse naturali. Sono le tecnologie che meglio permettono, grazie alle loro caratteristiche, la tutela dei beni comuni naturali, quindi delle risorse e dell’ambiente, favorendo ed incentivando la partecipazione delle comunità locali e valorizzando i saperi tradizionali, grazie al coinvolgimento di tutti gli attori, al basso costo, alla sostenibilità ambientale, contribuendo all’affermazione dei diritti umani e alla salvaguardia dell’ambiente. Le Tecnologie Appropriate prese in esame sono quelle relative all’approvvigionamento idrico e alla depurazione dell’acqua tra cui: - la raccolta della nebbia, - metodi semplici per la perforazione di pozzi, - pompe a pedali e pompe manuali per l’approvvigionamento idrico, - la raccolta dell’acqua piovana, - il recupero delle sorgenti, - semplici metodi per la depurazione dell’acqua al punto d’uso (filtro in ceramica, filtro a sabbia, filtro in tessuto, disinfezione e distillazione solare). Il quinto Capitolo espone invece le Tecnolocie Appropriate per la gestione dei rifiuti nei PVS, in cui sono descritte: - soluzioni per la raccolta dei rifiuti nei PVS, - soluzioni per lo smaltimento dei rifiuti nei PVS, - semplici tecnologie per il riciclaggio dei rifiuti solidi. Il sesto Capitolo tratta tematiche riguardanti la Cooperazione Internazionale, la Cooperazione Decentrata e i progetti di Sviluppo Umano. Per progetti di sviluppo si intende, nell’ambito della Cooperazione, quei progetti che hanno come obiettivi la lotta alla povertà e il miglioramento delle condizioni di vita delle comunità beneficiarie dei PVS coinvolte nel progetto. All’interno dei progetti di cooperazione e di sviluppo umano gli interventi di tipo ambientale giocano un ruolo importante, visto che, come già detto, la povertà e il benessere delle popolazioni dipende dal benessere degli ecosistemi in cui vivono: favorire la tutela dell’ambiente, garantire l’accesso all’acqua potabile, la corretta gestione dei rifiuti e dei reflui nonché l’approvvigionamento energetico pulito sono aspetti necessari per permettere ad ogni individuo, soprattutto se vive in condizioni di “sviluppo”, di condurre una vita sana e produttiva. È importante quindi, negli interventi di sviluppo umano di carattere tecnico ed ambientale, scegliere soluzioni decentrate che prevedano l’adozione di Tecnologie Appropriate per contribuire a valorizzare l’ambiente e a tutelare la salute della comunità. I Capitoli 7 ed 8 prendono in esame i metodi per la valutazione degli interventi di sviluppo umano. Un altro aspetto fondamentale che rientra nel ruolo dei tecnici infatti è l’utilizzo di un corretto metodo valutativo per la scelta dei progetti possibili che tenga presente tutti gli aspetti, ovvero gli impatti sociali, ambientali, economici e che si cali bene alle realtà svantaggiate come quelle prese in considerazione in questo lavoro; un metodo cioè che consenta una valutazione specifica per i progetti di sviluppo umano e che possa permettere l’individuazione del progetto/intervento tecnologico e ambientale più appropriato ad ogni contesto specifico. Dall’analisi dei vari strumenti valutativi si è scelto di sviluppare un modello per la valutazione degli interventi di carattere ambientale nei progetti di Cooperazione Decentrata basato sull’Analisi Multi Criteria e sulla Analisi Gerarchica. L’oggetto di questa ricerca è stato quindi lo sviluppo di una metodologia, che tramite il supporto matematico e metodologico dell’Analisi Multi Criteria, permetta di valutare l’appropriatezza, la sostenibilità degli interventi di Sviluppo Umano di carattere ambientale, sviluppati all’interno di progetti di Cooperazione Internazionale e di Cooperazione Decentrata attraverso l’utilizzo di Tecnologie Appropriate. Nel Capitolo 9 viene proposta la metodologia, il modello di calcolo e i criteri su cui si basa la valutazione. I successivi capitoli (Capitolo 10 e Capitolo 11) sono invece dedicati alla sperimentazione della metodologia ai diversi casi studio: - “Progetto ambientale sulla gestione dei rifiuti presso i campi Profughi Saharawi”, Algeria, - “Programa 1 milhão de Cisternas, P1MC” e - “Programa Uma Terra e Duas Águas, P1+2”, Semi Arido brasiliano.

Applicazione della metodologia Life Cycle Assessment al Passito di Pantelleria

Il presente studio riguarda l’applicazione della metodologia Life Cycle Assessment (LCA) ad una bottiglia di Passito di Pantelleria, prodotta dall’Azienda vitivinicola “Donnafugata” localizzata nel comune di Marsala in Sicilia. L’obiettivo di tale studio consiste nel quantificare e valutare le prestazioni energetico-ambientali derivanti dall’intero ciclo di vita del processo produttivo, nonché le fasi di produzione che presentano il maggiore impatto. Lo studio è stato ulteriormente approfondito effettuando una comparazione tra la produzione della singola bottiglia di Passito nei diversi anni 2007, 2008 e 2009 con lo scopo di determinare quali tra questi risulta avere il maggiore impatto ambientale. Gli impatti ambientali di un’Azienda vitivinicola risultano avere la loro particolare importanza in quanto la produzione di vino è un processo di natura complessa. Di conseguenza tali impatti possono compromettere le componenti fondamentali del processo produttivo, a partire dalle uve coltivate in vigna fino ad arrivare in cantina, dove avviene la trasformazione dell’uva in mosto e la successiva fase di vinificazione che determina il prodotto finale messo in commercio. Proprio attraverso il fluire delle seguenti fasi di trasformazione, in che misura queste consumano energia e producono emissioni? È importante sottolineare che lo studio del ciclo di vita di un prodotto può essere considerato come un supporto fondamentale allo sviluppo di schemi di etichettatura ambientale attraverso i quali è possibile indirizzare il consumatore finale verso beni più rispettosi dell’ambiente e fornire informazioni chiare e trasparenti sulle prestazioni ambientali del prodotto stesso. Allo stesso tempo tale strumento può essere adoperato dall’azienda per fornire garanzia delle credenziali ambientali del prodotto acquisendo così un vantaggio competitivo rispetto alle aziende concorrenti. Infatti, nell’ambito delle politiche comunitarie di prodotto, una delle applicazioni più significative della valutazione del ciclo di vita si ha nella dichiarazione ambientale di prodotto o EPD (Environmental Product Declaration). L’EPD è uno schema di certificazione volontaria che rappresenta un marchio di qualità ecologica per i prodotti, permettendo di comunicare informazioni oggettive, confrontabili e credibili relative alla prestazione ambientale degli stessi. Per essere convalidabili, le prestazioni ambientali presenti nelle EPD devono rispettare i requisiti stabiliti dal PCR- Product Category Rules, un documento nel quale sono presenti le regole per lo studio di una certa categoria di prodotto. Il presente lavoro può essere suddiviso in cinque step successivi. Il primo prevede la descrizione della metodologia LCA, adottata per la quantificazione dell’impatto ambientale, analizzandone singolarmente le quattro fasi principali che la caratterizzano; il secondo presenta la descrizione dell’Azienda vitivinicola e del Passito di Pantelleria, oggetto della valutazione, mettendo in evidenza anche le particolarità ambientali del territorio Pantesco in cui il prodotto prende vita; il terzo fornisce una descrizione delle caratteristiche principali dello strumento applicativo utilizzato per l’analisi, SimaPro nella versione 7.3; il quarto descrive le diverse attività di lavorazione svolte nel complesso processo di produzione della bottiglia di Passito, focalizzando l’attenzione sui componenti primari dell’oggetto di valutazione ed il quinto riguarda la descrizione dell’analisi LCA applicata alla singola bottiglia di Passito.

Physical and mineralogical changes of Hungarian monumental stones exposed to different conditions: stone-testing in-situ and under laboratory conditions

The Székesfehérvár Ruin Garden is a unique assemblage of monuments belonging to the cultural heritage of Hungary due to its important role in the Middle Ages as the coronation and burial church of the Kings of the Hungarian Christian Kingdom. It has been nominated for “National Monument” and as a consequence, its protection in the present and future is required. Moreover, it was reconstructed and expanded several times throughout Hungarian history. By a quick overview of the current state of the monument, the presence of several lithotypes can be found among the remained building and decorative stones. Therefore, the research related to the materials is crucial not only for the conservation of that specific monument but also for other historic structures in Central Europe. The current research is divided in three main parts: i) description of lithologies and their provenance, ii) physical properties testing of historic material and iii) durability tests of analogous stones obtained from active quarries. The survey of the National Monument of Székesfehérvár, focuses on the historical importance and the architecture of the monument, the different construction periods, the identification of the different building stones and their distribution in the remaining parts of the monument and it also included provenance analyses. The second one was the in situ and laboratory testing of physical properties of historic material. As a final phase samples were taken from local quarries with similar physical and mineralogical characteristics to the ones used in the monument. The three studied lithologies are: fine oolitic limestone, a coarse oolitic limestone and a red compact limestone. These stones were used for rock mechanical and durability tests under laboratory conditions. The following techniques were used: a) in-situ: Schmidt Hammer Values, moisture content measurements, DRMS, mapping (construction ages, lithotypes, weathering forms) b) laboratory: petrographic analysis, XRD, determination of real density by means of helium pycnometer and bulk density by means of mercury pycnometer, pore size distribution by mercury intrusion porosimetry and by nitrogen adsorption, water absorption, determination of open porosity, DRMS, frost resistance, ultrasonic pulse velocity test, uniaxial compressive strength test and dynamic modulus of elasticity. The results show that initial uniaxial compressive strength is not necessarily a clear indicator of the stone durability. Bedding and other lithological heterogeneities can influence the strength and durability of individual specimens. In addition, long-term behaviour is influenced by exposure conditions, fabric and, especially, the pore size distribution of each sample. Therefore, a statistic evaluation of the results is highly recommended and they should be evaluated in combination with other investigations on internal structure and micro-scale heterogeneities of the material, such as petrographic observation, ultrasound pulse velocity and porosimetry. Laboratory tests used to estimate the durability of natural stone may give a good guidance to its short-term performance but they should not be taken as an ultimate indication of the long-term behaviour of the stone. The interdisciplinary study of the results confirms that stones in the monument show deterioration in terms of mineralogy, fabric and physical properties in comparison with quarried stones. Moreover stone-testing proves compatibility between quarried and historical stones. Good correlation is observed between the non-destructive-techniques and laboratory tests results which allow us to minimize sampling and assessing the condition of the materials. Concluding, this research can contribute to the diagnostic knowledge for further studies that are needed in order to evaluate the effect of recent and future protective measures.

Biofilms on exposed monumental stones: mechanism of formation and development of new control methods

Within the stone monumental artefacts artistic fountains are extremely favorable to formation of biofilms, giving rise to biodegradation processes related with physical-chemical and visual aspect alterations, because of their particular exposure conditions. Microbial diversity of five fountains (two from Spain and three from Italy) was investigated. It was observed an ample similarity between the biodiversity of monumental stones reported in literature and that one found in studied fountains. Mechanical procedures and toxic chemical products are usually employed to remove such phototrophic patinas. Alternative methods based on natural antifouling substances are recently experimented in the marine sector, due to their very low environmental impact and for the bio settlement prevention on partially immersed structures of ships. In the present work groups of antibiofouling agents (ABAs) were selected from literature for their ability to interfere, at molecular level, with the microbial communication system “quorum sensing”, inhibiting the initial phase of biofilm formation. The efficacy of some natural antibiofoulants agents (ABAs) with terrestrial (Capsaicine - CS, Cinnamaldehyde - CI) and marine origin (Zosteric Acid - ZA, poly-Alkyl Pyridinium Salts – pAPS and Ceramium botryocarpum extract - CBE), incorporated into two commercial coatings (Silres BS OH 100 - S and Wacker Silres BS 290 - W) commonly used in stone conservation procedures were evaluated. The formation of phototrophic biofilms in laboratory conditions (on Carrara marble specimens and Sierra Elvira stone) and on two monumental fountains (Tacca’s Fountain 2 - Florence, Italy and Fountain from Patio de la Lindaraja - Alhambra Palace, Granada, Spain) has been investigated in the presence or absence of these natural antifouling agents. The natural antibiofouling agents, at tested concentrations, demonstrated a certain inhibitory effect. The silane-siloxane based silicone coating (W) mixing with ABAs was more suitable with respect to ethyl silicate coating (S) and proved efficacy against biofilm formation only when incompletely cured. The laboratory results indicated a positive action in inhibiting the patina formation, especially for poly-alkyl pyridinium salts, zosteric acid and cinnamaldehyde, while on site tests revealed a good effect for zosteric acid.

On the degradation mechanisms under the influence of pedological factors through the study of archeological bronze patina

This experimental thesis concerns the study of the long-term behaviour of ancient bronzes recently excavated from burial conditions. The scientific interest is to clarify the effect of soil parameters on the degradation mechanisms of ancient bronze alloy. The work took into consideration bronzes recovered from the archaeological sites in the region of Dobrudja, Romania. The first part of research work was dedicated to the characterization of bronze artefacts using non destructive (micro-FTIR, reflectance mode) and micro-destructive (based on sampling and analysis of a stratigraphical section by OM and SEM-EDX) methods. Burial soils were geologically classified and analyzed by chemical methods (pH, conductivity, anions content). Most of objects analyzed showed a coarse and inhomogeneous corroded structure, often made up of several corrosion layers. This has been explained by the silt nature of soils, which contain low amount of clay and are, therefore, quite accessible to water and air. The main cause of a high dissolution rate of bronze alloys is the alternate water saturation and instauration of the soil, for example on a seasonal scale. Moreover, due to the vicinity of the Black Sea, the detrimental effect of chlorine has been evidenced for few objects, which were affected by the bronze disease. A general classification of corrosion layers was achieved by comparing values of the ratio Cu/Sn in the alloy and in the patina. Decuprification is a general trend, and enrichment of copper within the corrosion layers, due to the formation of thick layers of cuprite (Cu2O), is pointed out as well. Uncommon corrosion products and degradation patterns were presented as well, and they are probably due to peculiar local conditions taking place during the burial time, such as anaerobic conditions or fluctuating environmental conditions. In order to acquire a better insight into the corrosion mechanisms, the second part of the thesis has regarded simulation experiments, which were conducted on commercial Cu-Sn alloys, whose composition resembles those of ancient artefacts one. Electrochemical measurements were conducted in natural electrolytes, such as solutions extracted from natural soil (sampled at the archaeological sites) and seawater. Cyclic potentiodynamic experiments allowed appreciating the mechanism of corrosion in both cases. Soil extract’s electrolyte has been evaluated being a non aggressive medium, while artificial solution prepared by increasing the concentration of anions caused the pitting corrosion of the alloy, which is demonstrated by optical observations. In particular, electrochemical impedance spectroscopy allows assessing qualitatively the nature of corroded structures formed in soil and seawater. A double-structured layer is proposed, which differ, in the two cases, for the nature of the internal passive layer, which result defectiveness and porous in case of seawater.

Archaeological Baltic amber: degradation mechanisms and conservation measures

The aim of this project was to achieve a deep understanding of the mechanisms by which Baltic amber degrades, in order to develop techniques for preventive conservation of archaeological amber objects belonging to the National Museum of Denmark’s collections. To examine deterioration of Baltic amber, a starting point was to identify and monitor surface and bulk properties which are affected during degradation. The way to operate consisted of the use of accelerated ageing to initiate degradation of raw Baltic amber samples in different conditions of relative humidity, oxygen exposure or pH and, successively, of the use of non/micro-destructive techniques to identify and quantify changes in visual, chemical and structural properties. A large piece of raw Baltic amber was used to prepare several test samples for two different kinds of accelerated ageing: thermal-ageing and photo-ageing. During the ageing, amber samples were regularly examined through several analytical techniques related to different information: appearance/colour change by visual examination, photography and colorimetry; chemical change by infrared spectroscopy, Raman spectroscopy and elemental analysis; rate of oxidation by oxygen measurement; qualitative analysis of released volatiles by gas chromatography – mass spectrometry. The obtained results were analysed through both critical evaluation and statistical study. After the interpretation of the achieved data, the main relations between amber and environmental factors during the degradation process became clearer and it was possible to identify the major pathways by which amber degrades, such as hydrolysis of esters into alcohols and carboxylic acids, thermal-oxidation and photo-oxidation of terpenoid components, depolymerisation and decomposition of the chemical structure. At the end it was possible to suggest a preventive conservation strategy based on the control of climatic, atmospheric and lighting parameters in the environment where Baltic amber objects are stored and displayed.

Study of materials and technology of ancient floor mosaics' substrate

Ancient pavements are composed of a variety of preparatory or foundation layers constituting the substrate, and of a layer of tesserae, pebbles or marble slabs forming the surface of the floor. In other cases, the surface consists of a mortar layer beaten and polished. The term mosaic is associated with the presence of tesserae or pebbles, while the more general term pavement is used in all the cases. As past and modern excavations of ancient pavements demonstrated, all pavements do not necessarily display the stratigraphy of the substrate described in the ancient literary sources. In fact, the number and thickness of the preparatory layers, as well as the nature and the properties of their constituent materials, are often varying in pavements which are placed either in different sites or in different buildings within a same site or even in a same building. For such a reason, an investigation that takes account of the whole structure of the pavement is important when studying the archaeological context of the site where it is placed, when designing materials to be used for its maintenance and restoration, when documenting it and when presenting it to public. Five case studies represented by archaeological sites containing floor mosaics and other kind of pavements, dated to the Hellenistic and the Roman period, have been investigated by means of in situ and laboratory analyses. The results indicated that the characteristics of the studied pavements, namely the number and the thickness of the preparatory layers, and the properties of the mortars constituting them, vary according to the ancient use of the room where the pavements are placed and to the type of surface upon which they were built. The study contributed to the understanding of the function and the technology of the pavements’ substrate and to the characterization of its constituent materials. Furthermore, the research underlined the importance of the investigation of the whole structure of the pavement, included the foundation surface, in the interpretation of the archaeological context where it is located. A series of practical applications of the results of the research, in the designing of repair mortars for pavements, in the documentation of ancient pavements in the conservation practice, and in the presentation to public in situ and in museums of ancient pavements, have been suggested.

Multi-pollutants impact on modern cement built heritage

It is well known that the deposition of gaseous pollutants and aerosols plays a major role in causing the deterioration of monuments and built cultural heritage in European cities. Despite of many studies dedicated to the environmental damage of cultural heritage, in case of cement mortars, commonly used in the 20th century architecture, the deterioration due to air multipollutants impact, especially the formation of black crusts, is still not well explored making this issue a challenging area of research. This work centers on cement mortars – environment interactions, focusing on the diagnosis of the damage on the modern built heritage due to air multi-pollutants. For this purpose three sites, exposed to different urban areas in Europe, were selected for sampling and subsequent laboratory analyses: Centennial Hall, Wroclaw (Poland), Chiesa dell'Autostrada del Sole, Florence (Italy), Casa Galleria Vichi, Florence (Italy). The sampling sessions were performed taking into account the height from the ground level and protection from rain run off (sheltered, partly sheltered and exposed areas). The complete characterization of collected damage layer and underlying materials was performed using a range of analytical techniques: optical and scanning electron microscopy, X ray diffractometry, differential and gravimetric thermal analysis, ion chromatography, flash combustion/gas chromatographic analysis, inductively coupled plasma-optical emission spectrometer. The data were elaborated using statistical methods (i.e. principal components analyses) and enrichment factor for cement mortars was calculated for the first time. The results obtained from the experimental activity performed on the damage layers indicate that gypsum, due to the deposition of atmospheric sulphur compounds, is the main damage product at surfaces sheltered from rain run-off at Centennial Hall and Casa Galleria Vichi. By contrast, gypsum has not been identified in the samples collected at Chiesa dell'Autostrada del Sole. This is connected to the restoration works, particularly surface cleaning, regularly performed for the maintenance of the building. Moreover, the results obtained demonstrated the correlation between the location of the building and the composition of the damage layer: Centennial Hall is mainly undergoing to the impact of pollutants emitted from the close coal power stations, whilst Casa Galleria Vichi is principally affected by pollutants from vehicular exhaust in front of the building.

Trasmission and Reflection (ATR)Far-Infrared Spectroscopy Applied in the Analysis of Cultural Heritage Materials

FIR spectroscopy is an alternative way of collecting spectra of many inorganic pigments and corrosion products found on art objects, which is not normally observed in the MIR region. Most FIR spectra are traditionally collected in transmission mode but as a real novelty it is now also possible to record FIR spectra in ATR (Attenuated Total Reflectance) mode. In FIR transmission we employ polyethylene (PE) for preparation of pellets by embedding the sample in PE. Unfortunately, the preparation requires heating of the PE in order to produces at transparent pellet. This will affect compounds with low melting points, especially those with structurally incorporated water. Another option in FIR transmission is the use of thin films. We test the use of polyethylene thin film (PETF), both commercial and laboratory-made PETF. ATR collection of samples is possible in both the MIR and FIR region on solid, powdery or liquid samples. Changing from the MIR to the FIR region is easy as it simply requires the change of detector and beamsplitter (which can be performed within a few minutes). No preparation of the sample is necessary, which is a huge advantage over the PE transmission method. The most obvious difference, when comparing transmission with ATR, is the distortion of band shape (which appears asymmetrical in the lower wavenumber region) and intensity differences. However, the biggest difference can be the shift of strong absorbing bands moving to lower wavenumbers in ATR mode. The sometimes huge band shift necessitates the collection of standard library spectra in both FIR transmission and ATR modes, provided these two methods of collecting are to be employed for analyses of unknown samples. Standard samples of 150 pigment and corrosion compounds are thus collected in both FIR transmission and ATR mode in order to build up a digital library of spectra for comparison with unknown samples. XRD, XRF and Raman spectroscopy assists us in confirming the purity or impurity of our standard samples. 24 didactic test tables, with known pigment and binder painted on the surface of a limestone tablet, are used for testing the established library and different ways of collecting in ATR and transmission mode. In ATR, micro samples are scratched from the surface and examined in both the MIR and FIR region. Additionally, direct surface contact of the didactic tablets with the ATR crystal are tested together with water enhanced surface contact. In FIR transmission we compare the powder from our test tablet on the laboratory PETF and embedded in PE. We also compare the PE pellets collected using a 4x beam condenser, focusing the IR beam area from 8 mm to 2 mm. A few samples collected from a mural painting in a Nepalese temple, corrosion products collected from archaeological Chinese bronze objects and samples from a mural paintings in an Italian abbey, are examined by ATR or transmission spectroscopy.

The effect of linseed oil on the properties of lime-based restoration mortars

The traditional lime mortar is composed of hydrated lime, sand and water. Besides these constituents it may also contain additives aiming to modify fresh mortar´s properties and/or to improve hardened mortar´s strength and durability. Already in the first civilizations various additives were used to enhance mortar´s quality, among the organic additives, linseed oil was one of the most common. From literature we know that it was used already in Roman period to reduce water permeability of a mortar, but the mechanism and the technology, e.g. effects of different dosages, are not clearly explained. There are only few works studying the effect of oil experimentally. Knowing the function of oil in historical mortars is important for designing a new compatible repair mortar. Moreover, linseed oil addition could increase the sometimes insufficient durability of lime-based mortars used for reparation and it could be a natural alternative to synthetic additives. In the present study, the effect of linseed oil on the properties of six various lime-based mortars has been studied. Mortars´ compositions have been selected with respect to composition of historical mortars, but also mortars used in a modern restoration practise have been tested. Oil was added in two different concentrations – 1% and 3% by the weight of binder. The addition of 1% of linseed oil has proved to have positive effect on mortars´ properties. It improves mechanical characteristics and limits water absorption into mortar without affecting significantly the total open porosity or decreasing the degree of carbonation. On the other hand, the 3% addition of linseed oil is making mortar to be almost hydrophobic, but it markedly decreases mortars´ strength. However, all types of tested lime-based mortars with the oil addition showed significantly decreased water and salt solution absorption by capillary rise. Addition of oil into mortars is also decreasing the proportion of pores which are easily accessible to water. Furthermore, mortars with linseed oil showed significantly improved resistance to salt crystallization and freeze-thaw cycles. On the base of the obtained results, the addition of 1% of linseed oil can be taken into consideration in the design of mortars meant to repair or replace historic mortars.

Durability of monumental stones treated with siloxane-based water repellents

The thesis investigates the effect of siloxane-based water repellents on the durability of monumental stones. Laspra, a micritic limestone typical for the Spanish region of Asturias, and Repedea, an oolitic limestone from Moldavia, Romania were selected for the present study, due to their regional / national significance and level of usage. As for the siloxane-based water repellents, three worldwide used products, namely Lotexan-N, Silres® BS 290 and Tegosivin HL 100 and a newly synthesized nanocomposite material, TMSPMA, obtained starting from the 3(trimethoxysilyl)propyl methacrylate as a precursor were investigated. The limestones and the water repellents were thoroughly characterized using specific techniques. The coating of the two monumental stones with the mentioned products and the investigation of coating efficiency yielded to the conclusion that all treatments induce good water repellent properties. The treated limestones were afterwards submitted to different artificially accelerated ageing tests – resistance against UV irradiation, resistance to salt mist action and resistance to SO2 action in the presence of humidity –, the results being analyzed according to standardized evaluation methods. The durability of the treated stones was proved to depend on both stone characteristics and water repellent chemical structure. All four water repellents induced a good protection against UV irradiation, no significant differences among them being noticed. As far as the resistance to salt mist action is concerned, the product that afforded the best results when applied on Laspra was TMSPMA, and on Repedea, Silres® BS 290 or / and TMSPMA showed the highest efficiency. The best resistance to SO2 action in the presence of humidity was conferred by Tegosivin HL 100 and TMSPMA when applied on Laspra, while Silres® BS 290 and TMSPMA afforded better results in the case of Repedea.

Study of the building and decorative materials and techniques used in Hungarian Roman sites

The aims of this research were: - To identify the characteristics, properties and provenance of the building and decorative material found in three Hungarian Roman sites: Nagyharsány, Nemesvámos-Balácapuszta and Aquincum - To provide a database of information on the different sites - To have an overview of main conservation strategies applied in Hungary. Geological studies, macroscopical and microscopical observations, XRD investigations, physical and chemical analyses allowed us to define the characteristics and properties of the different kinds of collected materials. Building stones sampled from Nagyharsány site showed two different kinds of massive limestone belonging to the areas surrounding the villa. Also Building stones sampled from Nemesvámos-Balácapuszta Roman villa proved to be compatible with limestone belonging to local sources. Mural painting fragments show that all samples are units composed of multilayered structures. Mosaic tesserae can be classified as following: -Pale yellow , blackish and pink tesserae are comparable with local limestone; -White tessera, composed of marble, was probably imported from distant regions of the Empire, as the usual practice of Romans. Mortars present different characteristics according to the age, the site and the functions: -Building mortars are generally lime based, white or pale yellow in colour, present a high percentage of aggregates represented by fine sand; -Supporting mortars from both mosaics and mural paintings are reddish or pinkish in colour, due to the presence of high percentage of brick dust and tiles fragments, and present a higher content of MgO. Although the condition of the sites, there is an insignificant content of soluble salts. Database The whole study has allowed us to provide work sheets for each samples, including all characteristics and properties. Furthermore, all sites included in the frame of the research have been described and illustrated on the base of their floor plans, material and construction methodologies. It can be concluded that: 1. In Nagyharsány Archaeological site, it is possible to define a sequence of different construction phases on the base of the study of building material and mortars. The results are comparable with the chronology of the site provided by the archaeologists 2. The material used for construction was of local origin while the more precious ones, used for decorative elements, were probably imported from long distance 3. Construction techniques in Hungary mainly refer to the usual Roman knowledge and practice (Vitruvius); few differences have been found 4. The database will represent an archive for Archaeologists, Historians and Conservators dealing with Roman period in Hungary.

The Effect of Preservative Interventions on the Chemical- Physical and Structural Characteristics of Panel Painting

This work studies the impact of two traditional Romanian treatments, Red Petroleum and Propolis, in terms of real efficiency and consequence on the wooden artifacts. The application of these solutions is still a widely adopted and popular technique in preservative conservation but the impact of these solutions is not well known. It is important to know the effect of treatments on chemical-physical and structural characteristics of the artifacts, not only for understanding the influence on present conditions but also for foreseeing the future behavior. These treatments with Romanian traditional products are compared with a commercial antifungal product, Biotin R, which is utilized as reference to control the effectiveness of Red Petroleum and Propolis. Red Petroleum and Propolis are not active against mould while Biotin R is very active. Mould attack is mostly concentrated in the painted layer, where the tempera, containing glue and egg, enhance nutrition availability for moulds. Biotin R, even if is not a real insecticide but a fungicide, was the most active product against insect attack of the three products, followed by Red Petroleum, Propolis and untreated reference. As for colour, it did not change so much after the application of Red Petroleum and Biotin R and the colour difference was almost not perceptible. On the contrary, Propolis affected the colour a lot. During the exposure at different RH, the colour changes significantly at 100% RH at equilibrium and this is mainly due to the mould attack. Red Petroleum penetrates deeply into wood, while Propolis does not penetrate and remains only on the surface. However, Red Petroleum does not interact chemically with wood substance and it is easy volatilized in oven-dry condition. On the contrary Propolis interacts chemically with wood substance and hardly volatilized, even in oven-dry condition and consequently Propolis remains where it penetrated, mostly on the surface. Treatment by immersion has impact on wood physical parameters while treatment by brushing does not have significant impact. Especially Red Petroleum has an apparent impact on moisture content (MC) due to the penetration of solution, while Propolis does not penetrate so much and remains only on surface therefore Propolis does not have so much impact as Red Petroleum. However, if the weight of the solution penetrated in wood is eliminated, there is not significant difference in MC between treated and untreated samples. Considering physical parameters, dimensional stability is an important parameter. The variation of wood moisture content causes shrinkages/swelling of the wood that polychrome layer can only partially follow. The dimension of wooden supports varied under different moisture conditioning; the painted layer cannot completely follow this deformation, and consequently a degradation and deterioration caused by detachment, occurs. That detachment affects the polychrome stratification of the panel painting and eventually the connections between the different layer compositions of the panel painting.