Nuclear magnetic resonance-determined lipoprotein subclass profile in the DCCT/EDIC cohort:associations with carotid intima-media thickness

To relate nuclear magnetic resonance lipoprotein subclass profiles (NMR-LSP) and other lipoprotein-related factors with carotid intima-media thickness (IMT) in Type 1 diabetes.

Patrick Moore, Arthur C. Clarke and ‘British Outer Space’ in the mid 20th century

This article seeks to explore a notion of 'British outer space' in the mid 20th century with reference to the British Interplanetary Society and the works of Patrick Moore and Arthur C. Clarke. Geographies of outer space have been examined following early work by Denis Cosgrove on the Apollo space photographs. Cosgrove's work has encouraged a growing body of work that seeks to examine both the 'Earth from space' perspective as well as its reciprocal, 'space from Earth'. This article aligns itself with the latter viewpoint, in attempting to define a national culture of 'British outer space'. This is found to have an important connection with the British Interplanetary Society, founded in 1933 near Liverpool, which went on to influence the works of Patrick Moore, who edited the magazine Spaceflight and presented the television programme The Sky at Night, and Arthur C. Clarke, who became known as a science fiction writer through his early novels in the 1950s. The themes of audience participation and human destiny in outer space are examined in a close reading of these two case studies, and further engagement with cultures of outer space in geography is encouraged. © The Author(s) 2012.

A prospective cohort study of obesity and risk of oesophageal and gastric adenocarcinoma in the NIH-AARP Diet and Health Study

Objective: The incidence of oesophageal adenocarcinoma (EAC) has increased rapidly over the past 40 years and accumulating evidence suggests that obesity, as measured by body mass index (BMI), is a major risk factor. It remains unclear whether abdominal obesity is associated with EAC and gastric adenocarcinoma.

Design: Cox proportional hazards regression was used to examine associations between overall and abdominal obesity with EAC and gastric adenocarcinoma among 218 854 participants in the prospective NIHeAARP cohort.

Results: 253 incident EAC, 191 gastric cardia adenocarcinomas and 125 gastric non-cardia adenocarcinomas accrued to the cohort. Overall obesity (BMI) was positively associated with EAC and gastric
cardia adenocarcinoma risk (highest ($35 kg/m2) vs referent (18.5e<25 kg/m2); HR 2.11, 95% CI 1.09 to 4.09 and HR 3.67, 95% CI 2.00 to 6.71, respectively). Waist circumference was also positively associated with EAC and gastric cardia adenocarcinoma risk (highest vs referent; HR 2.01, 95% CI 1.35 to 3.00 and HR 2.22, 95% CI 1.43 to 3.47, respectively), whereas waist-to-hip ratio (WHR) was positively associated with EAC risk only (highest vs referent; HR 1.81, 95% CI 1.24 to 2.64) and persisted in patients with normal BMI (18.5e<25 kg/m2). Mutual adjustment of WHR and BMI attenuated
both, but did not eliminate the positive associations for either with risk of EAC. In contrast, the majority of the anthropometric variables were not associated with adenocarcinomas of the gastric non-cardia.

Conclusion Overall obesity was associated with a higher risk of EAC and gastric cardia adenocarcinoma, whereas abdominal obesity was found to be associated with increased EAC risk; even in people with normal BMI

Incubation or Induction? Gendered Identity Work in the Context of Technology Business Incubation

While there is a substantial body of literature exploring the influence of business incubation upon early stage firms, this debate remains almost entirely gender blind. This article challenges this assumption by adopting a feminist perspective to reveal business incubation as a gendered process shaping the identity work undertaken by women seeking legitimacy as technology venturers. In so doing, we critically evaluate prevailing normative analyses of the business incubation process and entrepreneurial legitimation. To illustrate this argument, we draw upon empirical evidence which reveals technology incubation as a legitimating induction process encouraging women to reproduce masculinized representations of the normative technology entrepreneur.

Tri-axial accelerometers tease apart discrete behaviours in the common cuttlefish Sepia officinalis

Acceleration data loggers can be used to construct time-energy budgets or identify specific behaviours in free living animals. Within a marine context such devices have been largely deployed on vertebrates with comparatively little attention paid to commercially important invertebrates such as cephalopod molluscs. Here we tested the utility of tri-axial accelerometers to tease apart six discrete behaviours in the common cuttlefish Sepia officinalis. By considering depth profiles in conjunction with body pitch and roll and overall dynamic body acceleration we were able to make distinctions between resting at the seabed, active swimming, mating, post-coital panting and active manoeuvring along the seabed. © 2012 Marine Biological Association of the United Kingdom.

Arsenic Bioaccessibility in Cooked Rice as Affected by Arsenic in Cooking Water

Rice can easily accumulate arsenic (As) into its grain and is known to be the highest As-containing cereal. In addition, the As burden in rice may increase during its processing (such as when cooking using As-polluted water). The health risk posed by the presence of As in cooked rice depends on its release from the matrix along the digestive system (bioaccessibility). Two types of white polished long-grain rice, namely, nonparboiled and parboiled (total As: 202 and 190 mu g As kg(-1), respectively), were cooked in excess of water with different levels of As (0, 10, 47, 222, and 450 mu g As L-1). The bioaccessibility of As from these cooked rice batches was evaluated with an in vitro dynamic digestion process. Rice cooked with water containing 0 and 10 mu g As L-1 showed lower As concentrations than the raw (uncooked) rice. However, cooking water with relatively high As content (>= 47 mu g As L-1) significantly increased the As concentration in the cooked rice up to 8- and 9-fold for the nonparboiled and parboiled rice, respectively. Parboiled rice, which is most widely consumed in South Asia, showed a higher percentage of As bioaccessibility (59% to 99%) than nonparboiled rice (36% to 69%) and most of the As bioaccessible in the cooked rice (80% to 99%) was released easily during the first 2 h of digestion. The estimation of the As intake through cooked rice based on the As bioaccessibility highlights that a few grams of cooked rice (less than 25 g dry weight per day) cooked with highly As contaminated water is equivalent to the amount of As from 2 L water containing the maximum permissible limit (10 mu g As L-1).

Note. Speciation of arsenic in licorice confectionery products and estimation of health risks

Total-arsenic (T-As) and arsenic (As) species were determined by HPLC-HG-AAS in ten different confectionery products: nine throat pearls and an industrial licorice extract. The Spanish legislation sets a maximum total-As content in confectionery products at 0.1 mu g/g. T-As concentrations were above the permitted maximum limit (mean of 0.219 +/- 0.008 mu g/g). All As was present in the form of toxic inorganic species. The daily consumption of licorice-confections in Spain is 1.1 g and leads to a daily intake of inorganic-As of 0.23 mu g (0.2% of the tolerable daily intake of inorganic As for a teenager). These experimental results proved that even though high total-As concentrations were found in licorice throat pearls and that all the As found was present as inorganic species, no significant risks for health are expected just by considering this As source.

Polemic and apocalyptic in the Cromwellian invasion of Scotland

This article describes the culture of print and polemic associated with the Cromwellian invasion of Scotland and the resistance of the Church of Scotland. It argues that print solidified Parliamentary ideas during the invasion but that it did not continue to do so after English dominance had been established. These texts illustrate the divisions between the mentalité of the Cromwellian rank-and-file and that of the rather small and probably unrepresentative body of opinion formers who sought to control and represent it.

Evaluation of Corrosion Fatigue Behaviour of Laser-welded NiTi Alloys using Bending Rotation Fatigue Test in Simulated Body Fluid

Shape memory NiTi alloys have been used extensively for medical device applications such as orthopedic, dental, vascular and cardiovascular devices on account of their unique shape memory effect (SME) and super-elasticity (SE). Laser welding is found to be the most suitable method used to fabricate NiTi-based medical components. However, the performance of laser-welded NiTi alloys under corrosive environments is not fully understood and a specific focus on understanding the corrosion fatigue behaviour is not evident in the literature. This study reveals a comparison of corrosion fatigue behaviour of laser-welded and bare NiTi alloys using bending rotation fatigue (BRF) test which was integrated with a specifically designed corrosion cell. The testing environment was Hanks’ solution (simulated body fluid) at 37.5oC. Electrochemical impedance spectroscopic (EIS) measurement was carried out to monitor the change of corrosion resistance at different periods during the BRF test. Experiments indicate that the laser-welded NiTi alloy would be more susceptible to the corrosion fatigue attack than the bare NiTi alloy. This finding can serve as a benchmark for the product designers and engineers to determine the factor of safety of NiTi medical devices fabricated using laser welding.

Microabrasion-corrosion of cast CoCrMo alloy in simulated body fluids

Wear and corrosion of metal-on-metal hip replacements results in wear debris and metal-ion release in vivo, which may subsequently cause pain and hypersensitivity for patients. Retrieved metal-on-metal hip replacements have revealed that two-body sliding wear and three-body abrasive wear are the predominant wear mechanisms. However, there is a lack of understanding of the combined effects of wear/corrosion, especially the effect of abrasion-corrosion.

This study investigates the sliding-corrosion and abrasion-corrosion performance of a cast CoCrMo alloy in simulated hip joint environments using a microabrasion rig integrated with an electrochemical cell. Tests have been conducted in 0.9% NaCl, phosphate buffered saline solution, 25% and 50% bovine serum solutions with 0 or 1 g cm(-3) SiC at 37 degrees C. Experimental results reveal that under abrasion-corrosion test conditions, the presence of proteins increased the total specific wear rate. Conversely, electrochemical noise measurements indicated that the average anodic current levels were appreciably lower for the proteinaceous solutions when compared with the inorganic solutions. A severely deformed nanocrystalline layer was identified immediately below the worn surface for both proteinaceous and inorganic solutions. The layer is formed by a recrystallisation process and/or a strain-induced phase transformation that occurs during microabrasion-corrosion. (C) 2008 Elsevier Ltd. All rights reserved.

Micro-abrasion mechanisms of cast CoCrMo in simulated body fluids

The abrasion seen on some of the retrieved CoCrMo hip joints has been reported to be caused by entrained hard particles in vivo. However, little work has been reported on the abrasion mechanisms of CoCrMo alloy in simulated body environments. Therefore. this study covers the mapping of micro-abrasion wear mechanisms of cast CoCrMo induced by third body hard particles under a wide range of abrasive test conditions. This study has a specific focus on covering the possible in vivo wear modes seen on metal-on-metal (MoM) surfaces. Nano-indentation and nano-scratch tests were also employed to further investigate the secondary wear mechanisms-nano-scale material deformation that involved in micro-abrasion processes. This work addresses the potential detrimental effects of third body hard particles in vivo such as increased wear rates (debris generation) and corrosion (metal-ion release). The abrasive wear mechanisms of cast CoCrMo have been investigated under various wear-corrosion conditions employing two abrasives, SiC (similar to 4 mu m) and Al(2)O(3) (similar to 1 mu m), in two test solutions, 0.9% NaCl and 25% bovine serum. The specific wear rates, wear mechanisms and transitions between mechanisms are discussed in terms of the abrasive size, volume fraction and the test solutions deployed. The work shows that at high abrasive volume fractions, the presence of protein enhanced the wear loss due to the enhanced particle entrainment, whereas at much lower abrasive volume fractions, protein reduced the wear loss by acting as a boundary lubricant or rolling elements which reduced the abrasivity (load per particle) of the abrasive particles. The abrasive wear rate and wear mechanisms of the CoCrMo are dependent on the nature of the third body abrasives, their entrainment into the contact and the presence of the proteins. (C) 2009 Elsevier B.V. All rights reserved.

Living in The Matrix: Virtual Reality Systems and Hyperspatial Representation in Architecture

In the digital age, the hyperspace of virtual reality systems stands out as a new spatial concept creating a parallel realm to "real" space. Virtual reality influences one’s experience of and interaction with architectural space. This "otherworld" brings up the criticism of the existing conception of space, time and body. Hyperspaces are relatively new to designers but not to filmmakers. Their cinematic representations help the comprehension of the outcomes of these new spaces. Visualisation of futuristic ideas on the big screen turns film into a medium for spatial experimentation. Creating a possible future, The Matrix (Andy and Larry Wachowski, 1999) takes the concept of hyperspace to a level not-yet-realised but imagined. With a critical gaze at the existing norms of architecture, the film creates new horizons in terms of space. In this context, this study introduces science fiction cinema as a discussion medium to understand the potentials of virtual reality systems for the architecture of the twenty first century. As a "role model" cinema helps to better understand technological and spatial shifts. It acts as a vehicle for going beyond the spatial theories and designs of the twentieth century, and defining the conception of space in contemporary architecture.

Improved diffusive gradients in thin films (DGT) measurement of total dissolved inorganic arsenic in waters and soils using a hydrous zirconium oxide binding layer

Abstract Image

A high-capacity diffusive gradients in thin films (DGT) technique has been developed for measurement of total dissolved inorganic arsenic (As) using a long shelf life binding gel layer containing hydrous zirconium oxide (Zr-oxide). Both As(III) and As(V) were rapidly accumulated in the Zr-oxide gel and could be quantitatively recovered by elution using 1.0 M NaOH for freshwater or a mixture of 1.0 M NaOH and 1.0 M H2O2 for seawater. DGT uptake of As(III) and As(V) increased linearly with deployment time and was independent of pH (2.0–9.1), ionic strength (0.01–750 mM), the coexistence of phosphate (0.25–10 mg P L–1), and the aging of the Zr-oxide gel up to 24 months after production. The capacities of the Zr-oxide DGT were 159 μg As(III) and 434 μg As(V) per device for freshwater and 94 μg As(III) and 152 μg As(V) per device for seawater. These values were 5–29 times and 3–19 times more than those reported for the commonly used ferrihydrite and Metsorb DGTs, respectively. Deployments of the Zr-oxide DGT in As-spiked synthetic seawater provided accurate measurements of total dissolved inorganic As over the 96 h deployment, whereas ferrihydrite and Metsorb DGTs only measured the concentrations accurately up to 24 and 48 h, respectively. Deployments in soils showed that the Zr-oxide DGT was a reliable and robust tool, even for soil samples heavily polluted with As. In contrast, As in these soils was underestimated by ferrihydrite and Metsorb DGTs due to insufficient effective capacities, which were likely suppressed by the competing effects of phosphate.

Sediment changes upstream and downstream of the Altnahinch Dam in the River Bush in Northern Ireland: A preliminary study

The River Bush must reach a standard of good ecological potential (GEP) by 2015 due to the requirements of the water framework directive. The role of sediments within a water body is extremely important to all aspects of a river's regime. The aim of this research is to investigate the effects of Altnahinch Dam on sediment distribution in the River Bush (a heavily modified water body) with comparison made against the Glendun River (an unmodified water body). Samples collected from the rivers were analysed by physical (pebble count, sieve analysis) and statistical methods (ANOVA, GRADISTAT). An increase in fine sediments upstream of the dam provides evidence that the dam is impacting sediment distribution. Downstream effects are not shown to be significant. The output of this study also implies similar impacts at other drinking water storage impoundments. This research recommends that a sediment management plan be put in place for Altnahinch Dam and that further studies be carried-out concentrating on fine sediment distribution upstream of the dam. 

The Changing Context for Planning Education in the UK and the Prospects for Research-Led, Practice-Engaged Teaching

The UK’s Royal Town Planning Institute (RTPI) celebrates its centenary in 2014, marking 100 years of close relationships between university-based Planning Schools and a professional body focussed on planning practice. During this period, the context for university education and the very idea of planning has changed dramatically contributing to a continual renegotiation of the relationships between the planning profession and the educational institutions it accredits. These changes have been particularly acute in the last ten years where a number of factors have forced a rapid change in the nature of planning education in the UK. This has included a boom and then slump in the number of planning students linked to the national economic situation, a reorganisation of many planning schools and their merger with cognate disciplines such as geography and an increased focus of research output, rather than professional engagement the key institutional indicator of success. This last factor adds a particularly new dimension to the profession-university relationship, which could potentially lead to either a straining of tensions or a synergy through research-led teaching that could significantly benefit both.

This paper will briefly review the evolution of UK planning schools and the co-evolution of the main ideas informing planning education. It will then describe the current profile of UK planning schools, based on an extensive national survey conducted on behalf of the Royal Town Planning Institute. The paper will then critically review the main challenges and opportunities facing UK Planning Schools in the context of changes in both planning practice and higher education. It will then move on to the concept of research-led teaching, drawing on current practice in the UK and review how well this concept serves students and the idea of developing reflective planning practitioners. Finally, the paper will seek to draw broad lessons from the experience of the UK and reflect on the type of planning education that can best serve planning professions in a variety of international contexts in the future.