Biomass and stable isotope composition of plankton in five size fractions along a zonal transect (24°N) from the Canary Islands to Florida in January-March 2011

The spatial variability of biomass and stable isotopes in plankton size fractions in the upper 200 m was studied in a high spatial resolution transect along 24°N from Canary Islands to Florida (January - March 2011) during Leg 8 of the Malaspina-2010 expedition (http://www.expedicionmalaspina.es) to determine nitrogen and carbon sources. Plankton samples were collected by vertical tows of a microplankton net (40 mm mesh size) and a mesoplankton net (200 mm mesh size) through the upper 200 m of the water column. Sampling was between 10:00 and 16:00 h GMT. Plankton was separated into five size fractions (40 - 200, 200 - 500, 500 - 1000, 1000 - 2000 and > 2000 mm) by gentle filtration of the samples by a graded series of nylon sieves (2000, 1000, 500, 200 and 40 mm). Large gelatinous organisms were removed before filtration. Aliquots for each size fraction were collected on pre-weighed glass-fibre filters, dried (60°C, 48 h) and stored in a desiccator before determination of biomass (dry weight), carbon and nitrogen content and natural abundance of stable carbon and nitrogen isotopes ashore. Vertical advection of waters predominated in lateral zones while the central Atlantic (30-70°W) was characterized by a strong stratification and oligotrophic surface waters. Plankton biomass was low in the central zone and high in both eastern and western sides, with most of the variability due to either large (>2000 µm) and small plankton (<500 µm). Carbon isotopes reflected mainly the advection the deep water in lateral zones. Stable nitrogen isotopes showed a nearly symmetrical spatial distribution in all fractions, with the lowest values (delta15N <1per mill) in the central zone, and were inversely correlated to carbon stable isotopes (delta13C) and to the abundance of the nitrogen-fixer Trichodesmium. Diazotrophy was estimated to account for >50% of organic nitrogen in the central zone, and even >30% in eastern and western zones. The impact of diazotrophy increased with the size of the organisms, supporting the wide participation of all trophic levels in the processing of recently fixed nitrogen. These results indicate that atmospheric sources of carbon and nitrogen prevail over deep water sources in the subtropical North Atlantic and that the zone influenced by diazotrophy is much larger than reported in previous studies.

Age model and grain size distribution of the fine fraction of ODP Site 114-704

The physical properties of sediments beneath an upwelling area in the southern part of the Atlantic Ocean (ODP Hole 704A) were investigated. Highly significant correlations characterize the relationship of carbonate content to bulk density (R = 0.85), carbonate content to porosity (R = 0.84), and carbonate content to impedance (R = 0.84). No relationship exists between carbonate content and compressional-wave velocity (R = 0.24), indicating that amplitude variations in impedance are primarily controlled by variations in bulk density, which, in turn, are controlled by climatically driven biogenic opal and carbonate deposition. In general, maxima in impedance correspond to maxima in carbonate content (minima in opal content). The impedance record exhibits its most drastic change at about 2.4 Ma, marking dramatic increases in the average content of biogenic opal and the beginning of large-amplitude fluctuations. Between 0.7 and 0.4 Ma carbonate content, bulk density, and grain density decrease while opal content drastically increases. Similar changes have been observed in sediments beneath an upwelling cell off northwest Africa, indicating an oceanwide enhancement in upwelling or in the calcite corrosiveness of bottom water that appears to be isochronous.

Strontium isotope ratios of plant and soil samples from France

The dataset consists of 87Sr/86Sr isotope ratios of plant samples and soil leachates covering the major geologic regions of France. In addition to the isotope data it provides the spatial context for each sample, including background geology, field observations and soil descriptions. The dataset can be used to create Sr isoscapes for France, which can be applied in a wide range of fields including archaeology, ecology, soil, food, and forensic sciences.

Composition of sediments from the north-west African continental margin

Entlang dreier Profile vom NW-afrikanischen Kontinentalrand wurden Oberflächensedimente aus Wassertiefen zwischen 39m und 1514m auf ihre Zusammensetzung der Sandfraktion, auf ihre Gehalte an Karbonat und organischer Substanzen sowie auf ihre mineralogische Zusammensetzung hin untersucht. 1) Die auf dem Schelf und dem oberen Hang abgelagerten Sedimente (<500m) zeichnen sich durch hohe Sandgehalte (>70%) und durch hohe Grob/Fein-Verhältnisse aus. Unterhalb dieses Bereiches nimmt der Einfluß von Strömungen, die die Ablagerung von wesentlichen Mengen an Feinmaterial oberhalb 500m verhindern, ab, wie die starke Abnahme des Sandgehaltes, des Quarz/Glimmer und des Grob/Fein-Verhältnisses zeigen. Die Sedimente aus diesen Wassertiefen werden zum großen Teil aus Partikeln der Siltfraktion aufgebaut. Mit zunehmender Tiefe ist auch eine Zunahme der Tonfraktion zu beobachten, wobei höhere Tonanteile (>10%) erst in Tiefen unterhalb von 1200m auftreten. 2) Die quantitative Komponentenanalyse der Sandfraktion zeigt, daß der karbonatische Anteil fast ausschließlich biogener Herkunft ist. Er besteht zum wesentlichen Teil aus planktonischen Komponenten, vorwiegend Foraminiferen und mengenmäßig nur sehr untergeordnet auftretenden Pteropoden. Das opalkieselige Plankton (Diatomeen, Radiolarien) ist nur in geringen Mengen in den untersuchten Proben vorhanden. Auch das Benthos stellt nur eine untergeordnete Komponente der Sandfraktion dar. Vor allem der Anteil von Foraminiferen und Mollusken nimmt mit zunehmender Wassertiefe relativ deutlich ab. Die übrigen benthonischen Komponenten sind im Sediment nur in geringen Anteilen vertreten. 3) Hauptsedimentbildner im Profil Nouakchott sind die nichtbiogenen, terrigen-detritischen Sandkomponenten. Sie bestehen vorwiegend aus Quarz und mit zunehmender Wassertiefe aus Kotpillen bzw. Kotpillenaggregaten. Je nach Tiefe treten vor allem Glimmer (>1000m) und Glaukonit (<800m) hinzu. Die restlichen Komponenten treten nur gelegentlich und in äußerst geringen Mengen im rezenten Oberflächensediment auf. 4) Quarz wird als Windstaub mit dem NE-Passat und vor allem durch den "Harmattan" aus der Sahara heraustransportiert und vorwiegend über dem Schelfbereich sedimentiert. Windstaubmaterial besteht primär weitgehend aus Siltkorngrößen, die vor Nouakchott über die Schelfkante hinaustransportiert werden und zu einer Grobsiltanreicherung am mittleren Hang führen. 5) Das Verhältnis zwischen den karbonatischen Biogenkomponenten und den nichtbiogenen Partikeln spiegelt sich deutlich in der Karbonatverteilung sowohl des Gesamtsedimentes als auch der Sandfraktion wider. Relativ hohe Karbonatgehalte vor Cap Leven im Norden stehen sehr geringen Anteilen von Nouakchott gegenüber. Mit zunehmender Wassertiefe ist eine deutliche Abnahme des Karbonatanteils zu verfolgen. 6) Die Tatsache, daß das Profil Cap Blanc im Bereich des ganzjährigen Auftriebs liegt, spiegelt sich nicht in der Zusammensetzung der Sandfraktion wider. Südlich der Zone des ganzjährigen Auftriebs weisen verschiedene Parameter (Radiolarien, Diatomeen, Verhältnis von Radiolarien zu planktonischen Foraminiferen, Benthos/Plankton-Verhältnis der Foraminiferen) trotz abnehmender Auftriebsintensität eher steigende Werte auf. Dies ist wesentlich auf eine infolge des Nährstoffeintrages durch Flußzufuhr bedingte Verschiebung der maximalen Primärproduktion weit in südliche Richtung zurückzuführen. 7) In den aufgeführten Parametern zeigen sich von Profil zu Profil sehr deutliche fazielle Unterschiede, obwohl der großklimatische Hintergrund im gesamten Untersuchungsgebiet etwa gleich ist. Vor Cap Leven bildet sich eine Fazies, die im wesentlichen aus planktonischen Foraminiferen besteht, während das Sediment vor Nouakchott zum überwiegenden Teil aus nichtbiogenen Komponenten aufgebaut wird. Im Übergangsbereich vor Cap Blanc bildet sich eine Mischfazies, die keinerlei Prägung durch das Auftriebsgeschehen erhält. Die Ursachen dieser faziellen Unterschiede werden auf fehlenden Terrigeneinfluß vor Cap Leven einerseits und hohe Terrigenanlieferung vor Nouakchott andererseits zurückgeführt. 8) Die Zusammensetzung und Verteilung der rezenten Grobfraktionssedimente am Kontinentalrand vor Nw-Afrika wird somit im wesentlichen als Ergebnis einer Überprägung der Biogenanlieferung durch nichtbiogene Komponenten angesehen. Wesentlicher steuernder Faktor ist demnach das hier vorherrschende Windsystem.

Trace element geochemistry of zircons frim in situ ocean lithoshere

We characterize the textural and geochemical features of ocean crustal zircon recovered from plagiogranite, evolved gabbro, and metamorphosed ultramafic host-rocks collected along present-day slow and ultraslow spreading mid-ocean ridges (MORs). The geochemistry of 267 zircon grains was measured by sensitive high-resolution ion microprobe-reverse geometry at the USGS-Stanford Ion Microprobe facility. Three types of zircon are recognized based on texture and geochemistry. Most ocean crustal zircons resemble young magmatic zircon from other crustal settings, occurring as pristine, colorless euhedral (Type 1) or subhedral to anhedral (Type 2) grains. In these grains, Hf and most trace elements vary systematically with Ti, typically becoming enriched with falling Ti-in-zircon temperature. Ti-in-zircon temperatures range from 1,040 to 660°C (corrected for a TiO2 ~ 0.7, a SiO2 ~ 1.0, pressure ~ 2 kbar); intra-sample variation is typically ~60-15°C. Decreasing Ti correlates with enrichment in Hf to ~2 wt%, while additional Hf-enrichment occurs at relatively constant temperature. Trends between Ti and U, Y, REE, and Eu/Eu* exhibit a similar inflection, which may denote the onset of eutectic crystallization; the inflection is well-defined by zircons from plagiogranite and implies solidus temperatures of ~680-740°C. A third type of zircon is defined as being porous and colored with chaotic CL zoning, and occurs in ~25% of rock samples studied. These features, along with high measured La, Cl, S, Ca, and Fe, and low (Sm/La)N ratios are suggestive of interaction with aqueous fluids. Non-porous, luminescent CL overgrowth rims on porous grains record uniform temperatures averaging 615 ± 26°C (2SD, n = 7), implying zircon formation below the wet-granite solidus and under water-saturated conditions. Zircon geochemistry reflects, in part, source region; elevated HREE coupled with low U concentrations allow effective discrimination of ~80% of zircon formed at modern MORs from zircon in continental crust. The geochemistry and textural observations reported here serve as an important database for comparison with detrital, xenocrystic, and metamorphosed mafic rock-hosted zircon populations to evaluate provenance.

Nutrients and oxygen concentrations measured in water samples from the North Atlantic during the James Cook cruise JC087 in March 2013

Analysis for micro-molar concentrations of nitrate and nitrite, nitrite, phosphate, silicate and ammonia was undertaken on a SEAL Analytical UK Ltd, AA3 segmented flow autoanalyser following methods described by Kirkwood (1996). Samples were drawn from Niskin bottles on the CTD into 15ml polycarbonate centrifuge tubes and kept refrigerated at approximately 4oC until analysis, which generally commenced within 30 minutes. Overall 23 runs with 597 samples were analysed. This is a total of 502 CTD samples, 69 underway samples and 26 from other sources. An artificial seawater matrix (ASW) of 40g/litre sodium chloride was used as the inter-sample wash and standard matrix. The nutrient free status of this solution was checked by running Ocean Scientific International (OSI) low nutrient seawater (LNS) on every run. A single set of mixed standards were made up by diluting 5mM solutions made from weighed dried salts in 1litre of ASW into plastic 250ml volumetric flasks that had been cleaned by washing in MilliQ water (MQ). Data processing was undertaken using SEAL Analytical UK Ltd proprietary software (AACE 6.07) and was performed within a few hours of the run being finished. The sample time was 60 seconds and the wash time was 30 seconds. The lines were washed daily with wash solutions specific for each chemistry, but comprised of MQ, MQ and SDS, MQ and Triton-X, or MQ and Brij-35. Three times during the cruise the phosphate and silicate channels were washed with a weak sodium hypochlorite solution.

Radar profiles from South Shetland Islands/Western Antarctic Peninsula

The sedimentary architecture of polar gravel-beach ridges is presented and it is shown that ridge internal geometries reflect past wave-climate conditions. Ground-penetrating radar (GPR) data obtained along the coasts of Potter Peninsula (King George Island) show that beach ridges unconformably overlie the prograding strand plain. Development of individual ridges is seen to result from multiple storms in periods of increased storm-wave impact on the coast. Strand-plain progradation, by contrast, is the result of swash sedimentation at the beach-face under persistent calm conditions. The sedimentary architecture of beach ridges in sheltered parts of the coast is characterized by seaward-dipping prograding beds, being the result of swash deposition under stormy conditions, or aggrading beds formed by wave overtopping. By contrast, ridges exposed to high-energy waves are composed of seaward- as well as landward-dipping strata, bundled by numerous erosional unconformities. These erosional unconformities are the result of sediment starvation or partial reworking of ridge material during exceptional strong storms. The number of individual ridges which are preserved from a given time interval varies along the coast depending on the morphodynamic setting: sheltered coasts are characterized by numerous small ridges, whereas fewer but larger ridges develop on exposed beaches. The frequency of ridge building ranges from decades in the low-energy settings up to 1600 years under high-energy conditions. Beach ridges in the study area cluster at 9.5, 7.5, 5.5, and below 3.5 m above the present-day storm beach. Based on radiocarbon data, this is interpreted to reflect distinct periods of increased storminess and/or shortened annual sea-ice coverage in the area of the South Shetland Islands for the times around 4.3, c. 3.1, 1.9 ka cal BP, and after 0.65 ka cal BP. Ages further indicate that even ridges at higher elevations can be subject to later reactivation and reworking. A careful investigation of the stratigraphic architecture is therefore essential prior to sampling for dating purposes.

(Table 2) Production parameters of phytoplankton and some associated parameters in the area of the Titanic Polygon

Studies were carried out mostly in the area of RMS Titanic wreck site (41°44'N, 49°57'W) located above the continental slope and the south of the Grand Banks of Newfoundland. In a period from 18.06 to 24.09.2001 five surveys of production characteristics of surface phytoplankton were conducted over 5-9 days. Mean values of these characteristics obtained during the surveys were 9.2-11.7 mg C/m**3 per day for primary production (C_phs), 0.102-0.188 mg/m**3 for chlorophyll a (C_chls), and 4.44-7.42 mg C/mg chl. a per hour for assimilation number (AN). The main reason for low C_phs variability was a significant inverse relationship (R=-0.66) between AN and C_chls found over the research area. When cold shelf waters dominated in the area (27.07 to 19.08.2001), C_chls values for the slope region (0.125+/-0.031 µg/l) and for the outer shelf (0.130+/-0.040 µg/l) were similar. During strengthening of influence of warmer slope waters within area (from 29.08 to 13.09.2001), C_chls concentration within surface waters of the outer shelf was 0.152+/-0.039 µg/l and exceeded one for the slope region (0.094+/-0.004 µg/l) by factor 1.6. Against the background of low Cchls values, the High values of integral primary production in the water column (510-1010 mg C/m**2 per day) at low C_chls values measured within the area were determined both by high assimilation activity of phytoplankton and by the deep (30-40 m) maximum of primary production. Main reasons for formation of such a maximum were high chlorophyll concentration within the layer of the deep chlorophyll maximum (up to 0.5-2.5 µg/l) and in the relatively high solar irradiance within this layer varying from 1.4 to 8.6% of subsurface PAR.