Aplicação de tratamentos eletroquímicos integrados para remediação de solos e águas contaminadas com petróleo e pesticidas

Electrochemical technologies have been proposed as a promising alternative for the treatment of effluents and contaminated soils. Therefore, the objective of this work was to study the treatment of contaminated soils and wastewaters using electrochemical technologies. Thus, the study regarding the scale-up of the electrochemical system with continuous flow treatment of wastewater of the petrochemical industry was investigated using platinum electrodes supported on titanium (Ti / Pt), and boron-doped diamond (BDD). The results clearly showed that under the operating conditions studied and electrocatalytic materials employed, the better removal efficiency was achieved with BDD electrode reducing the chemical oxygen demand (COD) from 2746 mg L-1 to 200 mg L-1 in 5 h consuming 56.2 kWh m-3 . The decontamination of soils and effluents by petrochemical products was evaluated by studying the effects of electrokinetic remediation for removal of total petroleum hydrocarbons (HTP) from contaminated soil with diesel. The efficiency of this process was dependent on the electrolyte used Na2SO4 (96.46%), citric acid (81.36%) and NaOH (68.03%) for 15 days. Furthermore, the effluent after treatment of the soil was treated by electrochemical oxidation, achieving a good elimination of the organic polluting load dissolved. Depending on the physical behavior of wastewater contaminated with oil (emulsified state); atrazine emulsified effluents were investigated. The main characteristics of the effluent produced during the washing of contaminated soil were studied, being dependent on the surfactant dosage used; which determined its electrolytic treatment with BDD. The electrochemical oxidation of emulsified effluent of atrazine was efficient, but the key to the treatment is reducing the size of micelles.

Onde fica o sertão rompem-se as águas: processo de territorialização da ribeira do Apodi-Mossoró (1676-1725)

The Portuguese territorial process of the captaincy of Rio Grande was initiated in1598 with the conquest of the Potengi River bar by Mascarenhas Homem. This process lasted until 1633, when it was interrupted by the arrival of the Dutch, and resumed only in 1654. From this year on, the occupation of unknown lands of the captaincy was encouraged, supporting the advancement towards conquering the backlands, breaking the divisive boundaries with the captaincy of Siará Grande so far known: the Assú riverside. This breakthrough resulted in confrontations with the inhabitants of these lands, known as tapuias, leading to outbreak of several conflicts that composed the Barbarians War. The main stage of such events in Rio Grande, between the years 1687 and 1720, was precisely the Assú riverside, one of the spaces to be investigated by this research. Therefore, this paper aims to analyze the advance of the conquerors in Rio Grande, contributing to the territorial process, which resulted in the emergence of a new border between Rio Grande and Siará Grande: the Apodi-Mossoró river. For this purpose, it was used sources produced between the years 1659 and 1725, as the settlement letters, royal charters, correspondence between the City Council of Natal, captains of Rio Grande and the government of Pernambuco and also the general government, as well as the documents related to the militia composed mainly by Paulistas who struggled in the captaincy.

O sistema aquífero Barreiras na região de Parnamirim, RN: uso das águas e potencialidades

The study area is within the Pirangi River Basin, eastern sector of Rio Grande do Norte state, where is located of the Parnamirim city. It has an area of approximately 370 km². Urbanization has developed much fast without an appropriate infrastructure, mainly by the lack of sewage systems, with risks of contamination of groundwater that may cause serious damage to the health of the population. The Barreiras Aquifer System groundwater in the area represents the main source of water supply for urban and rural populations. The use of groundwater occurs without adequate planning and therefore, important recharge areas are being occupied. This study was conducted to quantify the use and evaluation of the potential of groundwater, in order to increase good water quality supply and lower risks of being affected by polluting activities. With these objectives, the following activities were carried out: 268 points of water have been registered; characterization of the lithological, thickness and hydrogeological structure of the Barreiras aquifer, based on the correlation of well logs; and evaluation of hydrodynamic parameters of the aquifer, from the interpretation of results well pumping tests. It was found that the saturated thickness increases from west to east towards the sea, with values ranging from 15,47-56,5 m with an average of 32,45 m. The hydrodynamic parameters using Cooper-Jacob method were: average transmissivity of 5,9x10-3 m²/s and average hydraulic conductivity 2,82x10-4 m/s. The effective porosity is of 15%, obtained by applying Biecinski equation. The potentiometric map shows the main direction of groundwater flow, from west to east, and identifies the recharge areas corresponding to the region of the tablelands of the "Barreiras". The river valleys refer to the discharge areas of the aquifer system. The Recharge was estimated at 253 mm/year, which corresponds to the 16.4% rate of infiltration.

O sistema aquífero Barreiras na região de Parnamirim, RN: uso das águas e potencialidades

The study area is within the Pirangi River Basin, eastern sector of Rio Grande do Norte state, where is located of the Parnamirim city. It has an area of approximately 370 km². Urbanization has developed much fast without an appropriate infrastructure, mainly by the lack of sewage systems, with risks of contamination of groundwater that may cause serious damage to the health of the population. The Barreiras Aquifer System groundwater in the area represents the main source of water supply for urban and rural populations. The use of groundwater occurs without adequate planning and therefore, important recharge areas are being occupied. This study was conducted to quantify the use and evaluation of the potential of groundwater, in order to increase good water quality supply and lower risks of being affected by polluting activities. With these objectives, the following activities were carried out: 268 points of water have been registered; characterization of the lithological, thickness and hydrogeological structure of the Barreiras aquifer, based on the correlation of well logs; and evaluation of hydrodynamic parameters of the aquifer, from the interpretation of results well pumping tests. It was found that the saturated thickness increases from west to east towards the sea, with values ranging from 15,47-56,5 m with an average of 32,45 m. The hydrodynamic parameters using Cooper-Jacob method were: average transmissivity of 5,9x10-3 m²/s and average hydraulic conductivity 2,82x10-4 m/s. The effective porosity is of 15%, obtained by applying Biecinski equation. The potentiometric map shows the main direction of groundwater flow, from west to east, and identifies the recharge areas corresponding to the region of the tablelands of the "Barreiras". The river valleys refer to the discharge areas of the aquifer system. The Recharge was estimated at 253 mm/year, which corresponds to the 16.4% rate of infiltration.

Usos de membranas de quitosana na remoção de cobre em águas residuais

In this work a chitosan (CS) ionically crosslinked were manufactured by treatment with sulfuric acid solution for application in the treatment of wastewater from oil industry. Two crosslinking process were developed: homogeneous and heterogeneous. In the homogeneous process the ratio molar of SO42-/ NH3+ (1:6 and 1:4) were the variable analyzed, denominated CS16 and CS14 respectively. In the heterogeneous process the soaking time of the membranes in sulfuric acid solution were the variable studied, being used times of 5 (CS5) and 30 (CS30) minutes. FTIR-ATR results indicated no changes in the characteristics of chitosan after homogeneous crosslinking process, while heterogeneous crosslinking showed formation of ionic bonds between protonated groups from chitosan and the crosslinking agent sulfate ions. TG/DTG and XRD analysis confirmed the formation of these interactions, as also shown the new structure on the surface region of CS5 and CS30 membranes compared to CS, CS16 e CS14. Swelling test in aqueous medium have shown that crosslinking process reduced the membrane sorption capacity. Swelling test in acid medium demonstrated that CS16 and CS14 membranes increasing the adsorption capacity up to a maximum percentage of 140% approximately, whereas the CS5 e CS30 reached a maximum of 60%. The mechanical properties indicated the stiff and ductile behavior of crosslinked membrane. Adsorption experiments of CuCl2 results that CS16 membranes reached the efficiency maximum with 73% of copper removal at pH 5.0 and 87% at pH 4.0. The experiments with CuSO4 also obtained efficiency maximum to the CS16 membrane and 80% to the removal of Cu2+ ions. Also was verified that the increase of concentration and temperature cause a decrease in the adsorption capacity for all membranes. Kinetics study indicated that pseudo-second-order obtained characterized better the membranes. Equilibrium studies demonstrated that the CS, CS16 and CS14 follow the Langmuir model, whereas CS5 and CS30 follows Freundlich model. Filtration experiments results with rejection maximum to the CS16 and CS5 membranes, reaching 92 and 98% respectively.

Usos de membranas de quitosana na remoção de cobre em águas residuais

In this work a chitosan (CS) ionically crosslinked were manufactured by treatment with sulfuric acid solution for application in the treatment of wastewater from oil industry. Two crosslinking process were developed: homogeneous and heterogeneous. In the homogeneous process the ratio molar of SO42-/ NH3+ (1:6 and 1:4) were the variable analyzed, denominated CS16 and CS14 respectively. In the heterogeneous process the soaking time of the membranes in sulfuric acid solution were the variable studied, being used times of 5 (CS5) and 30 (CS30) minutes. FTIR-ATR results indicated no changes in the characteristics of chitosan after homogeneous crosslinking process, while heterogeneous crosslinking showed formation of ionic bonds between protonated groups from chitosan and the crosslinking agent sulfate ions. TG/DTG and XRD analysis confirmed the formation of these interactions, as also shown the new structure on the surface region of CS5 and CS30 membranes compared to CS, CS16 e CS14. Swelling test in aqueous medium have shown that crosslinking process reduced the membrane sorption capacity. Swelling test in acid medium demonstrated that CS16 and CS14 membranes increasing the adsorption capacity up to a maximum percentage of 140% approximately, whereas the CS5 e CS30 reached a maximum of 60%. The mechanical properties indicated the stiff and ductile behavior of crosslinked membrane. Adsorption experiments of CuCl2 results that CS16 membranes reached the efficiency maximum with 73% of copper removal at pH 5.0 and 87% at pH 4.0. The experiments with CuSO4 also obtained efficiency maximum to the CS16 membrane and 80% to the removal of Cu2+ ions. Also was verified that the increase of concentration and temperature cause a decrease in the adsorption capacity for all membranes. Kinetics study indicated that pseudo-second-order obtained characterized better the membranes. Equilibrium studies demonstrated that the CS, CS16 and CS14 follow the Langmuir model, whereas CS5 and CS30 follows Freundlich model. Filtration experiments results with rejection maximum to the CS16 and CS5 membranes, reaching 92 and 98% respectively.

Análise da qualidade das águas, Ribeira Brava

O planeamento e gestão dos recursos hídricos é nos dias de hoje uma tarefa complicada, mas interessante e necessária, tendo em vista a satisfação de cada vez mais exigentes padrões de vida das populações e da qualidade do ambiente. Para que sejam possíveis escolhas e decisões judiciosas sobre a melhor forma de utilizar a água disponível, a sua gestão deve ser enformada por leis, actuações administrativas e disposições económico-financeiras, as quais determinam a necessidade da existência de sistemas institucionais competentes para as implementar. Sob o paradigma da sustentabilidade no contexto dos recursos hídricos, procedeu-se a uma avaliação do estado qualitativo das águas superficiais e subterrâneas do concelho da Ribeira Brava, quer a nível da distribuição de águas quer a nível das águas residuais. Inicialmente, caracterizou-se a região hidrográfica em estudo quanto aos aspetos geográficos, demográficos, socioeconómicos, bem como uma perspetiva quanto à caracterização hidrológica e geomorfológica da bacia hidrográfica a ser monitorizada. Posteriormente, apresentou-se, sob um manto teórico, o funcionamento de todo o sistema de abastecimento de água desde a captação até à sua devolução à natureza, passando pelas ETA, redes de distribuição e ETAR, passando a descrever-se a realidade em termos de infraestruturas existentes no concelho da Ribeira Brava. De seguida, procedeu-se à análise paramétrica temporal nas ETA e ETAR do concelho, cruzando esses dados com a legislação em vigor. Como etapa final, retratam-se as principais ilações quanto à monitorização efetuada, quer a nível de águas de distribuição, quer a nível das águas residuais, bem como se contribui com algumas recomendações, tendo em conta a manutenção e melhoria quantitativa e qualitativa da água no concelho da Ribeira Brava.

Impacte ambiental da viticultura do Douro na qualidade dos solos, sedimentos e águas

A atividade vitícola praticada na região do Douro é uma das mais importantes atividades agrícolas do país, não só devido a fatores socioculturais, como também pelo seu valor económico. A Região Demarcada do Douro (RDD) é uma das regiões vitícolas mais antiga do mundo, onde é produzido um dos vinhos generosos mais famosos do mundo, o Vinho do Porto. Contudo, no cultivo intensivo da vinha, o uso recorrente a pesticidas para o controlo de pragas das vinhas pode ter repercussões a nível da qualidade dos solos e dos cursos de água na envolvente às vinhas. O presente estudo foi desenvolvido numa área-piloto da sub-região Baixo Corgo da RDD, com o intuito de averiguar os possíveis efeitos e estimar os prováveis riscos ambientais promovidos pela viticultura. Foram selecionadas três vinhas, com idades de plantação distintas, onde foram recolhidas amostras de solos à superfície, tendo-se ainda feito uma recolha de amostras de água, sedimentos e águas intersticiais dos rios e da barragem na envolvente da área de estudo. Diferentes parâmetros químicos e físico-químicos foram analisados para uma avaliação global da área e prováveis fontes dos elementos. Especial destaque foi dado ao Cu, C, P, N, NO3 e S quer pelos teores anómalos e elevada variação espacial, quer pela sua importância como traçadores das atividades vitícolas e alguns como potenciais contaminantes. O Cu é o elemento potencialmente contaminante com mais destaque, visto que os seus teores são consideravelmente elevados nos solos e, a par, o P e N tendem a apresentar teores mais elevados na vinha mais velha, o que pode indicar efeitos de acumulação. Já os nitratos são mais elevados na vinha mais nova, visto que os processos de acumulação são mais difíceis neste caso devido à sua alta solubilidade e mobilidade. Apesar da elevada aplicação de S nas vinhas, os teores nestes solos são mais baixos do que nos solos sem atividades vitícolas, o que pode dever-se à sua baixa temperatura de sublimação e migração para níveis mais profundos dos solos. As baixas concentrações determinadas nos sedimentos e águas permitem concluir que as práticas vitícolas não parecem estar a interferir na qualidade dos mesmos. Contudo, novas campanhas de amostragem, abrangendo períodos sazonais distintos e próximos de épocas de aplicação de fertilizantes e pesticidas, deverão ser realizadas para validação temporal destes resultados.

Implementação de um plano de segurança de águas num hospital

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil

O desafio do aproveitamento de águas pluviais

Pretende-se com este trabalho avaliar a importância dos sistemas de aproveitamento de água da chuva como medida contributiva para a sustentabilidade dos recursos hídricos, a par do alerta para os preços praticados em Portugal, que comprometem a viabilidade deste tipo de sistema. Será também dada especial atenção à vulnerabilidade a que os referidos sistemas estão sujeitos, imposta pelos meses de Verão, onde os consumos de água são substancialmente maiores, mas durante os quais normalmente não ocorre precipitação. Após uma primeira componente teórica, determinar-se-á numa fase posterior o consumo anual de água registado numa moradia em Guimarães, e comparar-se-ão os resultados dos investimentos num sistema de aproveitamento de água da chuva em Portugal e na Dinamarca. Ampliando o âmbito para um edifício de escritórios e um edifício escolar, registar-se-á a rentabilidade do sistema. Essa rentabilidade, referindo-se ao número de anos em que o investimento é amortizado, é determinada numa folha de cálculo a partir da conjugação do valor investido com o valor que, anualmente, se consegue poupar com o uso da água da chuva. Concluir-se-á que o factor que verdadeiramente compromete a diferença entre o investimento e a poupança, reside no baixo valor do metro cúbico de água que, em média, se paga em Portugal. O estudo realizado nesta Dissertação revela que um valor mais alto para o preço da água, traduzir-se-ia numa menor diferença entre o investimento e a poupança, do qual resultava um período de retorno significativamente mais baixo. Além disso, os sistemas de aproveitamento de água da chuva são vulneráveis a diversas dificuldades, como as condições meteorológicas, que se traduzem na falta de precipitação nos meses de Verão onde a procura de água é muito superior.

Estructuración y desarrollo de guías educativas para el manejo del software digsilent v14 utilizando la herramienta DPL con base en un sistema de potencia de prueba de la IEEE

Tesis (Ingeniero Eléctrico). -- Universidad de La Salle. Facultad de Ingeniería. Programa de Ingeniería Eléctrica, 2014