Produzione e circolazione delle anfore greco italiche in area Adriatica

The present study, being part of a wide research program carried by the University of Bologna (Dipartimento di Scienze della Terra e Geo-Ambientali and Dipartimento di Archeologia) together with the Soprintendenze of Emilia-Romagna and Veneto, is aimed at examining the manufacturing and circulation of Greek Italic amphorae in the Adriatic area. This represents an essential step for the historical and archaeological reconstructions and in particular for: - the identification of local manufacturing though the archaeometric comparisons between ceramic samples and raw materials - the reconstruction of the ancient routes connecting different areas of the Roman world The examined archaeologic sites are representative of the main manufacturing areas in the Adriatic region both along the Italian and Albanian coasts: Adria, Cattolica, Rimini, Spina , Suasa and Phoinike. Notably, the Adriatic region not only represents the manufacturing area, but also coincides with the source area where the raw materials were collected. Archaeometric analyses of representative samples from the different areas of interests, were performed adapting the analytical tecniques used in mineralogy, petrography and geochemistry, to the study of ancient archaeological finds. These data were combined with the ones obtained from the analysis of clays, aimed at characterizing the nature of the raw materials. As a whole, an integration of these data with the available archaeologic observations led to significant advances in the scientific knowledge about of the main types of amphoric manufacturing and distribution in the Adriatic region. In particular, a local manufacturing is suggested for all the archaeological finds from Cattolica and for the main part of the archaeological finds from Suasa. Moreover, the occurrence of commercial routes between the sites of Rimini and Suasa and between Adria, Spina and Suasa is evidenced. On the contrary, for the amphorae from Phoinike a provenance from the examined sites is very unlikely.

Integrating new and traditional approaches for the estimate of slip-rates of active faults: examples from the Mw 6.3, 2009 L’Aquila earthquake area, Central Italy

This thesis is based on the integration of traditional and innovative approaches aimed at improving the normal faults seimogenic identification and characterization, focusing mainly on slip-rate estimate as a measure of the fault activity. The L’Aquila Mw 6.3 April 6, 2009 earthquake causative fault, namely the Paganica - San Demetrio fault system (PSDFS), was used as a test site. We developed a multidisciplinary and scale‐based strategy consisting of paleoseismological investigations, detailed geomorphological and geological field studies, as well as shallow geophysical imaging and an innovative application of physical properties measurements. We produced a detailed geomorphological and geological map of the PSDFS, defining its tectonic style, arrangement, kinematics, extent, geometry and internal complexities. The PSDFS is a 19 km-long tectonic structure, characterized by a complex structural setting and arranged in two main sectors: the Paganica sector to the NW, characterized by a narrow deformation zone, and the San Demetrio sector to SE, where the strain is accommodated by several tectonic structures, exhuming and dissecting a wide Quaternary basin, suggesting the occurrence of strain migration through time. The integration of all the fault displacement data and age constraints (radiocarbon dating, optically stimulated luminescence (OSL) and tephrochronology) helped in calculating an average Quaternary slip-rate representative for the PSDFS of 0.27 - 0.48 mm/yr. On the basis of its length (ca. 20 km) and slip per event (up to 0.8 m) we also estimated a max expected Magnitude of 6.3-6.8 for this fault. All these topics have a significant implication in terms of surface faulting hazard in the area and may contribute also to the understanding of the PSDFS seismic behavior and of the local seismic hazard.

Progetto ed implementazione di protocolli a basso consumo energetico per reti wireless

"I computer del nuovo millennio saranno sempre più invisibili, o meglio embedded, incorporati agli oggetti, ai mobili, anche al nostro corpo. L'intelligenza elettronica sviluppata su silicio diventerà sempre più diffusa e ubiqua. Sarà come un'orchestra di oggetti interattivi, non invasivi e dalla presenza discreta, ovunque". [Mark Weiser, 1991] La visione dell'ubiquitous computing, prevista da Weiser, è ormai molto vicina alla realtà e anticipa una rivoluzione tecnologica nella quale l'elaborazione di dati ha assunto un ruolo sempre più dominante nella nostra vita quotidiana. La rivoluzione porta non solo a vedere l'elaborazione di dati come un'operazione che si può compiere attraverso un computer desktop, legato quindi ad una postazione fissa, ma soprattutto a considerare l'uso della tecnologia come qualcosa di necessario in ogni occasione, in ogni luogo e la diffusione della miniaturizzazione dei dispositivi elettronici e delle tecnologie di comunicazione wireless ha contribuito notevolmente alla realizzazione di questo scenario. La possibilità di avere a disposizione nei luoghi più impensabili sistemi elettronici di piccole dimensioni e autoalimentati ha contribuito allo sviluppo di nuove applicazioni, tra le quali troviamo le WSN (Wireless Sensor Network), ovvero reti formate da dispositivi in grado di monitorare qualsiasi grandezza naturale misurabile e inviare i dati verso sistemi in grado di elaborare e immagazzinare le informazioni raccolte. La novità introdotta dalle reti WSN è rappresentata dalla possibilità di effettuare monitoraggi con continuità delle più diverse grandezze fisiche, il che ha consentito a questa nuova tecnologia l'accesso ad un mercato che prevede una vastità di scenari indefinita. Osservazioni estese sia nello spazio che nel tempo possono essere inoltre utili per poter ricavare informazioni sull'andamento di fenomeni naturali che, se monitorati saltuariamente, non fornirebbero alcuna informazione interessante. Tra i casi d'interesse più rilevanti si possono evidenziare: - segnalazione di emergenze (terremoti, inondazioni) - monitoraggio di parametri difficilmente accessibili all'uomo (frane, ghiacciai) - smart cities (analisi e controllo di illuminazione pubblica, traffico, inquinamento, contatori gas e luce) - monitoraggio di parametri utili al miglioramento di attività produttive (agricoltura intelligente, monitoraggio consumi) - sorveglianza (controllo accessi ad aree riservate, rilevamento della presenza dell'uomo) Il vantaggio rappresentato da un basso consumo energetico, e di conseguenza un tempo di vita della rete elevato, ha come controparte il non elevato range di copertura wireless, valutato nell'ordine delle decine di metri secondo lo standard IEEE 802.15.4. Il monitoraggio di un'area di grandi dimensioni richiede quindi la disposizione di nodi intermedi aventi le funzioni di un router, il cui compito sarà quello di inoltrare i dati ricevuti verso il coordinatore della rete. Il tempo di vita dei nodi intermedi è di notevole importanza perché, in caso di spegnimento, parte delle informazioni raccolte non raggiungerebbero il coordinatore e quindi non verrebbero immagazzinate e analizzate dall'uomo o dai sistemi di controllo. Lo scopo di questa trattazione è la creazione di un protocollo di comunicazione che preveda meccanismi di routing orientati alla ricerca del massimo tempo di vita della rete. Nel capitolo 1 vengono introdotte le WSN descrivendo caratteristiche generali, applicazioni, struttura della rete e architettura hardware richiesta. Nel capitolo 2 viene illustrato l'ambiente di sviluppo del progetto, analizzando le piattaforme hardware, firmware e software sulle quali ci appoggeremo per realizzare il progetto. Verranno descritti anche alcuni strumenti utili per effettuare la programmazione e il debug della rete. Nel capitolo 3 si descrivono i requisiti di progetto e si realizza una mappatura dell'architettura finale. Nel capitolo 4 si sviluppa il protocollo di routing, analizzando i consumi e motivando le scelte progettuali. Nel capitolo 5 vengono presentate le interfacce grafiche utilizzate utili per l'analisi dei dati. Nel capitolo 6 vengono esposti i risultati sperimentali dell'implementazione fissando come obiettivo il massimo lifetime della rete.

High resolution study of local stress inside alumina - micro mechanical analysis using laser scanning confocal microscope

The aim of this work is to measure the stress inside a hard micro object under extreme compression. To measure the internal stress, we compressed ruby spheres (a-Al2O3: Cr3+, 150 µm diameter) between two sapphire plates. Ruby fluorescence spectrum shifts to longer wavelengths under compression and can be related to the internal stress by a conversion coefficient. A confocal laser scanning microscope was used to excite and collect fluorescence at desired local spots inside the ruby sphere with spatial resolution of about 1 µm3. Under static external loads, the stress distribution within the center plane of the ruby sphere was measured directly for the first time. The result agreed to Hertz’s law. The stress across the contact area showed a hemispherical profile. The measured contact radius was in accord with the calculation by Hertz’s equation. Stress-load curves showed spike-like decrease after entering non-elastic phase, indicating the formation and coalescence of microcracks, which led to relaxing of stress. In the vicinity of the contact area luminescence spectra with multiple peaks were observed. This indicated the presence of domains of different stress, which were mechanically decoupled. Repeated loading cycles were applied to study the fatigue of ruby at the contact region. Progressive fatigue was observed when the load exceeded 1 N. As long as the load did not exceed 2 N stress-load curves were still continuous and could be described by Hertz’s law with a reduced Young’s modulus. Once the load exceeded 2 N, periodical spike-like decreases of the stress could be observed, implying a “memory effect” under repeated loading cycles. Vibration loading with higher frequencies was applied by a piezo. Redistributions of intensity on the fluorescence spectra were observed and it was attributed to the repopulation of the micro domains of different elasticity. Two stages of under vibration loading were suggested. In the first stage continuous damage carried on until certain limit, by which the second stage, e.g. breakage, followed in a discontinuous manner.

Local Earthquake Tomography by trans-dimensional Monte Carlo Sampling

In this study a new, fully non-linear, approach to Local Earthquake Tomography is presented. Local Earthquakes Tomography (LET) is a non-linear inversion problem that allows the joint determination of earthquakes parameters and velocity structure from arrival times of waves generated by local sources. Since the early developments of seismic tomography several inversion methods have been developed to solve this problem in a linearized way. In the framework of Monte Carlo sampling, we developed a new code based on the Reversible Jump Markov Chain Monte Carlo sampling method (Rj-McMc). It is a trans-dimensional approach in which the number of unknowns, and thus the model parameterization, is treated as one of the unknowns. I show that our new code allows overcoming major limitations of linearized tomography, opening a new perspective in seismic imaging. Synthetic tests demonstrate that our algorithm is able to produce a robust and reliable tomography without the need to make subjective a-priori assumptions about starting models and parameterization. Moreover it provides a more accurate estimate of uncertainties about the model parameters. Therefore, it is very suitable for investigating the velocity structure in regions that lack of accurate a-priori information. Synthetic tests also reveal that the lack of any regularization constraints allows extracting more information from the observed data and that the velocity structure can be detected also in regions where the density of rays is low and standard linearized codes fails. I also present high-resolution Vp and Vp/Vs models in two widespread investigated regions: the Parkfield segment of the San Andreas Fault (California, USA) and the area around the Alto Tiberina fault (Umbria-Marche, Italy). In both the cases, the models obtained with our code show a substantial improvement in the data fit, if compared with the models obtained from the same data set with the linearized inversion codes.

Paleosecular variation of the magnetic field recorded in Pleistocene-holocene volcanics from Pantelleria (italy) and Azores archipelago (portugal): implications for local volcanic history

The primary goal of volcanological studies is to reconstruct the eruptive history of active volcanoes, by correlating and dating volcanic deposits, in order to depict a future scenario and determine the volcanic hazard of an area. However, alternative methods are necessary where the lack of outcrops, the deposit variability and discontinuity make the correlation difficult, and suitable materials for an accurate dating lack. In this thesis, paleomagnetism (a branch of Geophysics studying the remanent magnetization preserved in rocks) is used as a correlating and dating tool. The correlation is based on the assumption that coeval rocks record similar paleomagnetic directions; the dating relies upon the comparison between paleomagnetic directions recorded by rocks with the expected values from references Paleo-Secular Variation curves (PSV, the variation of the geomagnetic field along time). I first used paleomagnetism to refine the knowledge of the pre – 50 ka geologic history of the Pantelleria island (Strait of Sicily, Italy), by correlating five ignimbrites and two breccias deposits emplaced during that period. Since the use of the paleomagnetic dating is limited by the availability of PSV curves for the studied area, I firstly recovered both paleomagnetic directions and intensities (using a modified Thellier method) from radiocarbon dated lava flows in São Miguel (Azores Islands, Portugal), reconstructing the first PSV reference curve for the Atlantic Ocean for the last 3 ka. Afterwards, I applied paleomagnetism to unravel the chronology and characteristics of Holocene volcanic activity at Faial (Azores) where geochronological age constraints lack. I correlated scoria cones and lava flows yielded by the same eruption on the Capelo Peninsula and dated eruptive events (by comparing paleomagnetic directions with PSV from France and United Kingdom), finding that the volcanics exposed at the Capelo Peninsula are younger than previously believed, and entirely comprised in the last 4 ka.

Cooperative Wireless Systems

This Ph.D. dissertation reports on the work performed at the Wireless Communication Laboratory - University of Bologna and National Research Council - as well as, for six months, at the Fraunhofer Institute for Integrated Circuit (IIS) in Nürnberg. The work of this thesis is in the area of wireless communications, especially with regards to cooperative communications aspects in narrow-band and ultra-wideband systems, cooperative links characterization, network geometry, power allocation techniques,and synchronization between nodes. The underpinning of this work is devoted to developing a general framework for design and analysis of wireless cooperative communication systems, which depends on propagation environment, transmission technique, diversity method, power allocation for various scenarios and relay positions. The optimal power allocation for minimizing the bit error probability at the destination is derived. In addition, a syncronization algorithm for master-slave communications is proposed with the aim of jointly compensate the clock drift and offset of wireless nodes composing the network.

Diversity and local democracy. The case of Republic of Macedonia - implications of ethnic diversity on municipal decision making and organizational performance

This research seeks to review the level of knowledge achieved in interpreting the relationship between the ethnic diversity at the workplace in the public sector and the organizational performance; as well as seeks to contribute in understanding the implications of this relationship. The study commenced with investigating the academic research in the relevant area addressing the following research questions: (a) How are diversity management and organizational performance conceptualized? (b) What are the existing findings of research concerning diversity at the workplace in the public organizations and organizational performance? (c) What factors intervene the relationship between the diversity and organizational performance? Based on the findings from the review of the academic research, this study seeks to contribute in understanding the ethnic diversity – performance relationship and its mplications at the local level in the Macedonian context. The reform process in Macedonia as a multicultural society, where for many years, inter-ethnic relations have been one of the most sensitive political issues, affecting both the stability of the country and the progress, focused mainly on the implementation of the decentralization and inclusion of ethnic minorities in the decision making process. With the implementation of the Ohrid Framework Agreement workforce at the units of local self-government in Republic of Macedonia is becoming more balanced with respect to ethnic minorities, with more workforce participation than ever by Albanians, Turks, Roma and other minorities. As public organizations at local level become more diverse along ethnic lines, it makes sense to pay more attention to how different ethnic groups interact with one another at work. Thus it gives additional importance on the research question addressed in the study and gives significance of the research in a broader scope.

Introduzione di un sistema di accesso wireless distribuito a gestione centralizzata in ambiente di tipo Enterprise o Campus

Nata dal progetto di migrazione, in un ambiente consolidato, di una infrastruttura Wireless distribuita su territorio all'interno di una MAN (Metropolitan Area Network), si cerca di illustrare quali sono i passi fondamentali da seguire e con cosa ci si deve misurare per progettare una soluzione funzionale ed elaborare una strategia avendo a che fare con architetture complesse, dove la messa in esercizio di un servizio offerto ad un numero elevato di utenti prevede uno studio ben preciso delle attività da svolgere. Un'attenta analisi, ci consentirà di seguire e riadattare le scelte implementative in funzione delle esigenze infrastrutturali, illustrandone le difficoltà, gli imprevisti e le modifiche intraprese passo passo. Gli argomenti trattati tendono a far comprendere con quali problematiche si ha a che fare nella fase implementativa passando dalla fase di analisi a quella decisionale, quella di migrazione architetturale e di installazione, oltre che alla scelta delle componenti e delle tecnologie specifiche che, prima di essere portate a regime, devono essere sottoposte agli opportuni test per la comprensione/risoluzione di problematiche complesse; come le operazioni necessarie per operare con una efficace metodologia.

Consumer Perception and Willingness to Pay for Local Food

A growing number of empirical studies recently investigated consumers' valuation for local food products. However, different aspects related to the local food consumption still remain vague or unexplored. As such, the objective of the present research is to fulfill the existing literature using a mixed methodological approach for the investigation of consumers' preferences and Willingness to Pay (WTP) for local food products. First of all, local food is still a blurred concept and this factor might be source of individuals' misperception for the local origin meaning. Therefore, a qualitative research has been performed in order to investigate the meaning and the perception of the local food in the Italian food market. Results from this analysis have been used as inputs for the building of a non-hypothetical Real Choice Experiment (RCE) to estimate consumers' WTP for locally and organically produced apple sauce. The contribution of this study is three-fold: (1) consumers' valuation for the local origin is interpreted in terms of regional borders, over the organic food claim in case of an unusual food product in the area of interest, (2) the interaction between individuals' personality traits and consumers’ preferences for local and organic foods is analyzed, (3) the role of Commitment Cost creation in consumers' choice making in case of uncertainty due to the use of a novel food product and of an unconventional food claim is investigated. Results suggest that consumers are willing to pay a higher price premium for organic over locally produced apple sauce, possibly because of the presence of a regulated certification. In accordance with Commitment Cost theory, the organic label might thus decrease consumers' uncertainty for the features of the product in question. Results also indicate that individuals' personality can be source of heterogeneity in consumers' preferences.

Studio geomorfologico dell'area carsica attorno alla Grotta Palombara (Melilli, Siracusa)

The following thesis attempts to study and analyse the geomorphological evolution of a relatively small coastal area located to the North of Syracuse (Southeastern Sicily). The presently inactive Palombara Cave is located in this area. The 800 metres of passages in this cave show an evolution in some way linked to the local topographic and environmental changes. This portion of coastline was affected more or less constantly by the tectonic uplift during the Pleistocene, which simultaneously to the eustatic variations have played a key role in the genesis of the marine terraces and the cave. Starting from a DTM made from Lidar data, using a GIS procedure several marine terraces have been mapped. These informations combinated with a geomorphological study of the area, allowed to identify and recognise the different orders of the Middle Pleistocene terraced surfaces. Four orders of terraces between 180-75 m a.s.l have been observed, illustrated and described. Furthermore, two other supposed terrace edges located respectively at 60 and 35 m, which would indicate the presence of two more orders, have been recognised. All these marine terraces appear to have formed in the last million years. The morphological data of the Palombara cave, highlights a genesis related to the rising of CO2 rich waters coming from the depths through the fractures of the rock mass, that ranks it as a hypogenic cave. The development has been influenced by the changes in the water table, in turn determined by the fluctuations in the sea level. In fact, the cave shows a speleogenetic evolution characterised by phases of karstification in phreatic and epiphreatic environment and fossilization stages of the upper branches in vadose conditions. These observations indicate that the cave probably started forming around 600 Ky ago, contemporary to the start of volcanic processes in the area.

Misure sperimentali per il monitoraggio e la sorveglianza di aree e strutture mediante reti di sensori wireless

Studio e realizzazione di una rete Wireless Sensor Network per il monitoraggio ambientale di area archeologica. Trasmissione dati raccolti su server tcp. Misure sperimentali su rete di sensori radar UWB per la localizzazione di un target in ambiente indoor

Ultrasonographic guided axillary plexus blocks with low volumes of local anaesthetics: a crossover volunteer study

Our study group recently evaluated an ED(95) local anaesthetic volume of 0.11 ml.mm(-2) cross-sectional nerve area for the ulnar nerve. This prospective, randomised, double-blind crossover study investigated whether this volume is sufficient for brachial plexus blocks at the axillary level. Ten volunteers received an ultrasonographic guided axillary brachial plexus block either with 0.11 ('low' volume) or 0.4 ('high' volume) ml.mm(-2) cross-sectional nerve area with mepivacaine 1%. The mean (SD) volume was in the low volume group 4.0 (1.0) and 14.8 (3.8) ml in the high volume group. The success rate for the individual nerve blocks was 27 out of 30 in the low volume group (90%) and 30 out of 30 in the high volume group (100%), resulting in 8 out of 10 (80%) vs 10 out of 10 (100%) complete blocks in the low vs the high volume groups, respectively (NS). The mean (SD) sensory onset time was 25.0 (14.8) min in the low volume group and 15.8 (6.8) min in the high volume group (p < 0.01). The mean (SD) duration of sensory block was 125 (38) min in the low volume group and 152 (70) min in the high volume group (NS). This study confirms our previous published ED(95) volume for mepivacaine 1% to block peripheral nerves. The volume of local anaesthetic has some influence on the sensory onset time.

Sustainable regional development: Reconciling global and local dynamics and stakes in the Swiss Alps

This article explores how global and local dynamics and stakes can be brought together when trying to combine conservation and regional development. For this purpose we analyse a series of studies carried out in the area of the Swiss Alps Jungfrau-Aletsch World Heritage Site (WHS). The approaches used in these studies to analyse the diversity and development of the region included data collection and evaluation of indicators such as population development, number of working places, occupation rates in various economic sectors and commuter balance, as well as interviews with key informants and assessment of existing planning tools. The major challenge of the newly declared World Heritage Region is that it is neither a political or administrative nor a cultural unit but constitutes a completely new type of space that breaks up and crosses traditional boundaries. The studies revealed an economic tertiarisation process and migration of the population from remote areas to regional centres. Tourism was identified as the key economic sector in the region. Regarding regional sustainability, the studies identified a need for quality dialogue and negotiation of interests and stakes. It was shown that in dealing with sustainability at the local level, many key issues cannot be resolved on the ground, as they depend on regional or national decisions, e.g. the conditions for tourism promotion in the region or economic validation of agricultural activity. We conclude from these findings that national or even international factors do not provide a basis for location-specific solutions, as they are often too general, and that the global label does not ensure sustainability in a designated WHS region; this depends entirely on local and regional dynamics.

Intratumoral budding is preoperative biopsies predicts local and distant metastasis in colorectal cancer patients

Objective: In 2011, the term “intratumoral budding, ITB” was used to describe the presence of tumor buds within the main tumor body and was correlated to worse clinical outcome in colorectal cancer patients. Here, we further elucidate the potential clinical role of ITB in pre-operative biopsies using pan-cytokeratin stained tissues and a quantitative scoring system. Method: 139 pre-operative biopsies from patients with colorectal cancer underwent immunohistochemistry for pancytokeratin (AE1/AE3). ITB were counted in the area of densest budding (40×) and classified as high-grade when >10 buds/HPF were observed based on receiver operating characteristic (ROC) curve analysis. Results: High-grade ITB occurred in 26.6 % of cases and was associated with right-sided tumor location (p=0.0356), more advanced pT (p=0.0198) and pN (p<0.0001) classifications, distant metastasis (p=0.0164), higher tumor grade (p=0.0037) and lymphatic invasion (p=0.0445). The specificity and positive predictive value for lymph node metastasis was 86.7 % and 75.6 %, respectively. Disease-free survival was significantly worse in patients with high-grade ITB (5-year survival=25 %) in comparison to patients with low-grade ITB (5-year survival=55 %) (p=0.0157). Conclusion: The assessment of ITB in pre-operative biopsies is predictive of local and distant metastasis in corresponding resections and should be considered in daily management of colorectal cancer patients.