(Table 1) List of samples with carbonate mineralogy, stable isotope, and accessory-mineral information

Petrographic and stable-isotope (d13C, d18O) patterns of carbonates from the Logatchev Hydrothermal Field (LHF), the Gakkel Ridge (GR), and a Late Devonian outcrop from the Frankenwald (Germany) were compared in an attempt to understand the genesis of carbonate minerals in marine volcanic rocks. Specifically, were the carbonate samples from modern sea floor settings and the Devonian analog of hydrothermal origin, low-temperature abiogenic origin (as inferred for aragonite in serpentinites from elsewhere on the Mid-Atlantic Ridge), or biogenic origin? Aragonite is the most abundant carbonate mineral in serpentinites from the two modern spreading ridges and occurs within massive sulfides of the LHF. The precipitation and preservation of aragonite suggests high Mg2+ and sulfate concentrations in fluids. Values of d18OPDB as high as +5.3 per mill for serpentinite-hosted aragonite and as high as +4.2 per mill for sulfide-hosted aragonite are consistent with precipitation from cold seawater. Most of the corresponding d13C values indicate a marine carbon source, whereas d13C values for sulfide-hosted aragonite as high as +3.6 per mill may reflect residual carbon dioxide in the zone of methanogenesis. Calcite veins from the LHF, by contrast, have low d18OPDB (-20.0 per mill to -16.1 per mill) and d13C values (-5.8 per mill to -4.5 per mill), indicative of precipitation from hydrothermal solutions (~129°-186°C) dominated by magmatic CO2. Calcite formation was probably favored by fluid rock interactions at elevated temperatures, which tend to remove solutes that inhibit calcite precipitation in seawater (Mg2+ and sulfate). Devonian Frankenwald calcites show low d18O values, reflecting diagenetic and metamorphic overprinting. Values of d13C around 0 per mill for basalt-hosted calcite indicate seawater-derived inorganic carbon, whereas d13C values for serpentinite-hosted calcite agree with mantle-derived CO2 (for values as low as -6 per mill) with a contribution of amagmatic carbon (for values as low as -8.6 per mill), presumably methane. Secondary mineral phases from the LHF for which a biogenic origin appears feasible include dolomite dumbbells, clotted carbonate, and a network of iron- and silica-rich filaments.

Calcium carbonate vein compositions from drill sites in the Atlantic and Pacific

Chemical (Sr, Mg) and isotopic (d18O, 87Sr/86Sr) compositions of calcium carbonate veins (CCV) in the oceanic basement were determined to reconstruct changes in Sr/Ca and Mg/Ca of seawater in the Cenozoic. We examined CCV from ten basement drill sites in the Atlantic and Pacific, ranging in age between 165 and 2.3 Ma. Six of these sites are from cold ridge flanks in basement <46 Ma, which provide direct information about seawater composition. CCV of these young sites were dated, using the Sr isotopic evolution of seawater. For the other sites, temperature-corrections were applied to correct for seawater-basement exchange processes. The combined data show that a period of constant/low Sr/Ca (4.46 - 6.22 mmol/mol) and Mg/Ca (1.12 - 2.03 mol/mol) between 165 and 30 Ma was followed by a steady increase in Mg/Ca ratios by a factor of three to modern ocean composition. Mg/Ca - Sr/Ca relations suggest that variations in hydrothermal fluxes and riverine input are likely causes driving the seawater compositional changes. However, additional forcing may be involved in explaining the timing and magnitude of changes. A plausible scenario is intensified carbonate production due to increased alkalinity input to the oceans from silicate weathering, which in turn is a result of subduction-zone recycling of CO2 from pelagic carbonate formed after the Cretaceous slow-down in ocean crust production rate.

Lithogeochemistry and fluid flow in the epithermal Veta Rublo base metal-silver deposit, Chonta Mine (Huancavelica, Perú)

The Chonta Mine (75º00’30” W & 13º04’30”S, 4495 to 5000 m absl), owned by Compañía Minera Caudalosa, operates a polymetallic Zn-Pb-Cu-Ag vein system of the low sulphidation epithermal type, hosted by cenozoic volcanics of dacitic to andesitic composition (Domos de Lava Formation). Veta Rublo, one of the main veins of the system, is worked underground to nearly 300 m. It strikes 60-80º NE and dips 60-70º SE; its width varies between 0.30 and 2.20m, and it crops out along 1 km, but is continued along strike by other veins, as Veta Caudalosa, for some 5 km. Typical metal contents are 7% Zn, 5% Pb, 0.4% Cu and 3 oz/t Ag, with quartz, sericite, sphalerite, galena, pyrite, chalcopyrite, fahlore as main minerals, and minor carbonate and sulphosalts.

Geothermometry, ore geochemistry and fluid flow in the Esperanza Vein, Huachocolpa District (Huancavelica, Peru)

The Esperanza Zn-Pb-Ag vein, owned by Compañía de Minas Buenaventura S.A.A., lies over 4000 to 4650 masl in the Western Cordillera of the Peruvian Central Andes. The Esperanza low sulphidation epithermal vein trends ~E-W along 1500 m; it dips to the South and can be followed to 350 m depth. As other veins of the district, like Teresita and Bienaventurada, it is hosted by intermediate to felsic volcanics (andesitic to dacitic compositions) of the Huachocolpa Group (Middle Miocene to Upper Pliocene). The mineralisation occurs mostly as open space filling related to fracture development during the Quechua III deformational event. Main ore minerals are sphalerite, galena, tetrahedrite, pyrite, chalcopyrite and Ag and Pb sulfosalts; quartz, barite and calcite are the main gangue minerals. Current production grades are ~5% Zn, ~8Oz/t Ag, ~3% Pb; usually very low Cu (mean ~0.04%).

Gold Ores Related to Shear Zones, West Santa Comba Fervenza Area (Galicia, NW Spain): A Mineralogical Study

Recent research has discovered high-grade Au ores in NNE-SSW trending shear zones in metamorphic proterozoic and palaeozoic terranes, some 40 km NW of Santiago de Compostela (NW Spain). The orebodies are bound to late-stage Hercynian structures, mainly due to brittle deformation, which are superimposed on earlier ductile shear zones, cutting through various catazonal lithologies, including ortho- and paragneisses, amphibolites, eclogites, and granites. Ore mineralogy, alteration, and ore textures define a frame whose main features are common to all prospects in the area. Main minerals are arsenopyrite and pyrite - accompanied by quartz, adularia, sericite, + (tourmaline, chlorite, carbonates, graphite), as main gangue minerals - with subordinate amounts of boulangerite, bismuthinite, kobellite, jamesonite, chalcopyrite, marcasite, galena, sphalerite, rutile, titanite, scheelite, beryl, fluorite, and minor native gold, electrum, native bismuth, fahlore, pyrrhotite, mackinawite, etc., defining a meso-catathermal paragenesis. Detailed microscopic study allows the author to propose a general descriptive scheme of textural classification for this type of ore. Most of the ores fill open spaces or veins, seal cracks or cement breccias; disseminated ores with replacement features related to alteration (mainly silicification, sericitization, and adularization) are also observed. Intensive and repeated cataclasis is a common feature of many ores, suggesting successive events of brittle deformation, hydrothermal flow, and ore precipitation. Gold may be transported and accumulated in any of these events, but tends to be concentrated in later ones. The origin of the gold ores is explained in terms of hydrotherreal discharge, associated with mainly brittle deformation and possibly related to granitic magmas, in the global tectonic frame of crustal evolution of West Galicia. The mineralogical and textural study suggests some criteria which will be of practical value for exploration and for ore processing. Ore grades can be improved by flotation of arsenopyrite. Non-conventional methods, such as pressure or bacterial leaching, may subsequently obtain a residue enriched in gold.

Microtermometría, direcciones de flujo hidrotermal y metalogenia del yacimiento de tungsteno de Pasto Bueno (Ancash, Perú)

El yacimiento de Pasto Bueno se localiza en el extremo nordeste del Batolito de la Cordillera Blanca, comprende diversas vetas, generalmente subverticales, asociadas al stock cuarzomonzonitico de Consuzo, datado como Terciario Superior, que intruye a las pizarras de la fm. Chicama y cuarcitas de la fm. Chimu. Las principales vetas discurren con direccion N-S cortando al stock, aunque tambien existen sistemas NE-SW asi como NW-SE encajados sobre las rocas metamorficas. La mineralogia de mena reconocida comprende wolframita (hubnerita), tetraedrita/tenantita, esfalerita y galena, en una ganga de cuarzo, fluorita, sericita, pirita y carbonatos, ademas de molibdenita, calcopirita, bornita, arsenopirita, enargita (luzonita), stolzita, scheelita, zinnwaldita, topacio, tungstita y arsenico nativo. Estudios previos han caracterizado Pasto Bueno como un yacimiento con una gran componente de greisen, con una evolucion de las vetas desde un episodio temprano esteril de 400 oC, depositando la mineralizacion economica en torno a los 220-250 oC y con un evento postumo de 175-220 oC rico en CO2. La precipitacion de la wolframita se produjo a partir de un fluido netamente hidrotermal, sin embargo, dicha precipitacion estuvo controlada por el aporte al sistema de aguas externas meteoricas y/o metamorficas. El trabajo llevado a cabo ha consistido en la realizacion de un estudio microtermometrico de las 3 principales estructuras del distrito: Consuelo, Alonso-Fenix y Chabuca, para caracterizar la evolucion del fluido mineralizador desde el stock (veta Consuelo) hacia las rocas metasedimentarias de las fm. Chicama y Chimu (manto Alonso-Fenix y veta Chabuca). Para ello se realizo un muestreo sobre el evento principal de mineralizacion. Dichas muestras se sometieron a un estudio petrografico de lamina gruesa para seleccionar las muestras optimas para el posterior estudio microtermometrico. Previamente a la obtencion de las medidas de temperatura de fusion del hielo (criotermometria) y de homogenizacion del fluido; se realizo un estudio de petrografia de inclusiones fluidas para caracterizarlas y seleccionar las representativas. La interpretacion de los resultados ha permitido confirmar la existencia de un episodio previo de alta temperatura, superior a 282 oC y un evento mineralizador con temperaturas en torno a los 200-240 oC. Sin embargo, las salinidades obtenidas son mucho menores que las previamente publicadas, en torno al 5 % peso eq. NaCl, frente a 11-17 % peso eq. NaCl. Tambien se ha observado un fluido postumo rico en CO2, pero de temperatura superior, en torno a los 270 oC. Los gradientes isotermicos muestran dos focos para dichos fluidos hidrotermales: el primero asociado al stock en la veta Consuelo, y el segundo en la veta Chabuca, asociado a la zona de cabalgamiento de las pizarras de la fm. Chicama sobre las cuarcitas de la fm. Chimu. Este segundo foco puede corresponder con los aportes externos de aguas metamorficas. Para finalizar, se dan una serie de pautas para guiar las futuras exploraciones en el yacimiento. ABSTRACT The Pasto Bueno deposit is located at the northeastern end of the Cordillera Blanca Batholith. It comprises several veins, generally subvertical, associated with the quartz-monzonite stock of Consuzo, dated as Tertiary, which intrudes the Chicama fm. slates and the Chimu fm. quartzites. The main veins trend N-S cutting the stock, although there are also NE-SW and NWSE systems, hosted by the metamorphic rocks. The ore mineralogy comprises wolframite (hubnerite), tetrahedrite/tennantite, sphalerite and galena in a gangue of quartz, fluorite, sericite, pyrite and carbonates, and minor molybdenite, chalcopyrite, bornite, arsenopyrite, enargite (luzonite), stolzite, scheelite, zinnwaldite, topaz, tungstite and native arsenic. Previous studies have characterized Pasto Bueno as a deposit with a large component of greisen, with an evolution of the veins from an early barren 400 oC event , followed by economic mineralization of about 220-250 °C and a late event of 175 -220 oC rich in CO2. Wolframite precipitation occurred from a purely hydrothermal fluid; however, this precipitation was controlled by an external flux of meteoric and/or metamorphic waters. Microthermometric studies of the 3 main structures of the district (Consuelo, Alonso-Fenix and Chabuca veins) have been carried out to depict the evolution of the mineralizing fluid coming from the stock (Consuelo vein) into the metasedimentary rocks of the Chimu and Chicama fm. (Alonso-Fenix and Chabuca veins). The sampling was performed over the main event of mineralization. These samples were subject to a quick plate petrography study in order to select the optimal samples for further microthermometry studies. Before the freezing/heating measures, a fluid inclusion petrography study was done to characterize and select the representative F.I. Interpretation of results has confirmed the existence of a previous episode of higher temperature, over 282 °C, and a mineralizing event with temperatures of about 200-240 °C. However, obtained salinities, about 5 wt% NaCl equivalents, are much lower than those previously reported, about 11-17 wt% NaCl equivalents. A last fluid, rich in CO2, but of higher temperature, about 270 oC, has been characterized. Isothermal gradients show two foci for the hydrothermal fluids: the first one associated to the Consuzo stock as shown in the Consuelo vein, and the second one related to the thrust fault which places the Chicama fm. slates over the Chimu fm. quartzites in the Chabuca vein area. This second focus may correspond to an external input of metamorphic waters. Finally, some guidelines have been given to guide future explorations.