The Role of Magnesium in Concrete Deterioration, HR-355, 1994

Concretes with service lives of less than 15 years and those with lives greater than 40 years were studied with petrographic microscope, scanning electron microscope, and electron microprobe to determine why these two groups of concrete exhibit such different degrees of durability under highway conditions. Coarse aggregate used in both types of concrete were from dolomite rock, but investigation revealed that dolomite aggregate in the two groups of concretes were much different in several respects. The poorly-performing aggregate is fine-grained, has numerous euhedral and subhedral dolomite rhombohedra, and has relatively high porosity. Aggregate from durable concrete is coarse-grained, with tightly interlocked crystal fabric, anhedral dolomite boundaries, and low porosity. Aggregate in short service life concrete was found to have undergone pervasive chemical reactions with the cement which produced reaction rims on the boundaries of coarse aggregate particles and in the cement region adjacent to aggregate boundaries. Textural and porosity differences are believed to be chiefly responsible for different service lives of the two groups of concrete. The basic reaction that has occurred in the short service life concretes between coarse aggregate and cement is an alkali-dolomite reaction. In the reaction dolomite from the aggregate reacts with hydroxide ions from the cement to free magnesium ions and carbonate ions, and the magnesium ions precipitate as brucite, Mg(OH)2. Simultaneously with this reaction, a second reaction occurs in which product carbonate ions react with portlandite from the cement to form calcite and hydroxide ions. Crystal growth pressures of newly formed brucite and calcite together with other processes, e.g. hydration state changes of magnesium chloride hydrates, lead to expansion of the concretes with resultant rapid deterioration. According to this model, magnesium from any source, either from reacting dolomite or from magnesium road deicers, has a major role in highway concrete deterioration. Consequently, magnesium deicers should be used with caution, and long-term testing of the effects of magnesium deicers on highway concrete should be implemented to determine their effects on durability.

Cardiovascular effects in patrol officers are associated with fine particulate matter from brake wear and engine emissions

Background: Exposure to fine particulate matter air pollutants (PM2.5) affects heart rate variability parameters, and levels of serum proteins associated with inflammation, hemostasis and thrombosis. This study investigated sources potentially responsible for cardiovascular and hematological effects in highway patrol troopers. Results: Nine healthy young non-smoking male troopers working from 3 PM to midnight were studied on four consecutive days during their shift and the following night. Sources of in-vehicle PM2.5 were identified with variance-maximizing rotational principal factor analysis of PM2.5-components and associated pollutants. Two source models were calculated. Sources of in-vehicle PM2.5 identified were 1) crustal material, 2) wear of steel automotive components, 3) gasoline combustion, 4) speed-changing traffic with engine emissions and brake wear. In one model, sources 1 and 2 collapsed to a single source. Source factors scores were compared to cardiac and blood parameters measured ten and fifteen hours, respectively, after each shift. The "speed-change" factor was significantly associated with mean heart cycle length (MCL, +7% per standard deviation increase in the factor score), heart rate variability (+16%), supraventricular ectopic beats (+39%), % neutrophils (+7%), % lymphocytes (-10%), red blood cell volume MCV (+1%), von Willebrand Factor (+9%), blood urea nitrogen (+7%), and protein C (-11%). The "crustal" factor (but not the "collapsed" source) was associated with MCL (+3%) and serum uric acid concentrations (+5%). Controlling for potential confounders had little influence on the effect estimates. Conclusion: PM2.5 originating from speed-changing traffic modulates the autonomic control of the heart rhythm, increases the frequency of premature supraventricular beats and elicits proinflammatory and pro-thrombotic responses in healthy young men. [Authors]

Peroxisome proliferator activated receptor BETA/DELTA as a central player in the skin response to ultra-violets radiation

Previous studies in the lab of Dr. Liliane Michalik, have shown thai the nuclear hormone receptor Peroxisome Proliferator Activated Receptor beta/delta (PPARß/ö) is an important regulator of skin homeostasis, being involved in the regulation of keratinocyte differentiation, inflammation, apoptosis, arid mouse skin wound healing. Studies of PPARß/ö knock out mice have suggested a possible role for this receptor in cancer. However, contradictory observations of the role for PPARß/ö on tumor growth have been published, depending on cellular contexts and biological models. Given the controversial role of PPARß/ö in skin carcinoma development, the main aim of this PhD work has been to further explore the implication of PPARß/ö in skin response to UV and skin tumor growth. This PhD dissertation is divided in four chapters. The first chapter describes the core part of the project, where I explored the changes in miRNA expression in the skin upon chronic UV irradiation of PPARß/ö wild type and knock-out mice. This analysis shed light on a miRNA- PPARß/ö signature and also predicted thai miR-21-3p (previously named miR-21*) is a key regulator of the PPARß/ö-dependent UV response in the pre-lesiona! skin. Using mice acutely UV-irradiated, ! further demonstrated that miR-21-3p is indirectly regulated by PPARß/ö through activation of Transforming Growth Factor (TGFß)-1 under UV exposure. I also show that miR-21-3p is deregulated in human cutaneous squamous celi carcinoma. In cultured keratinocytes, application of a miR-21 -3p mimic oligonucleotide sequence leads to the regulation of lipid metabolism-related pathway. In the second chapter, I demonstrate that the usage of an mRNA/miRNA combined bioinformatics analysis leads to the discovery of important pathways involved in the PPARß/ö-miRNA response of the skin to chronic UV irradiation, indeed, I validated angiogenesis and lipid metabolism as important functions regulated by PPARß/ö in this context. In the third chapter, we demonstrate that PPARß/5 knockout mice have decreased cutaneous squamous cell carcinomas incidence compared to wild type mice and that PPARß/5 directly activates the cSrc kinase gene. In the last chapter, we review novel insights into PPAR functions in keratinocytes and liver, with emphasis on PPARß/ö but also on PPARa. In summary, this PhD study shows that i) PPARß/5 is able to regulate biological function through regulation of miRNAs, and specifically through miR-21-3p, the passenger miRNA of the oncomiR miR-21, and that ii) the PPARß/5-dependent skin response to UV involves the regulation of angiogenesis and lipid metabolism. Furthermore, the bioinformatics study highlights the relevance of performing integrated mRNA and miRNA genome-wide studies in order to better screen mRNAs and/or miRNAs of interest in the biological context of diseases. - Des études préalables dans le laboratoire du Dr. Liliane Michalik ont démontré que le récepteur nucléaire PPARß/5 est un régulateur important de l'homéostasie de la peau, étant impliqué dans la régulation de la différenciation des keratinocytes, dans l'inflammation, dans l'apoptose et dans la cicatrisation de la peau chez !a souris. L'étude de souris knock-out pour le gène PPARß/5, ont suggérées un rôle possible de ce récepteur dans le cancer. Cependant, des observations opposées ont été publiées suggérant un rôle pro- ou anti- cancer selon le tissue impliqué et le type- cellulaire. En considérant cette controverse autour du rôle de PPARß/5 dans le développement des cancers de la peau, le but principal de mon projet de recherche aura été d'approfondir l'exploration du rôle de PPARß/5 dans la réponse de la peau aux UVs et dans le développement du cancer. Cette dissertation de thèse est divisée en quatre parties. Une première partie, représentant le coeur de mon travail de recherche, décrit la découverte de l'implication des microRNAs (rniRNAs) dans la réponse aux UVs de PPARß/ö et plus spécifiquement l'implication du miRNA miR- 21 -3p (précédemment nommé miR-21*). En étudiant un modèle de souris irradiées de manière aigüe aux UVs, nous montrons que ia régulation de miR-21-3p est PPARß/ö-däpenaante et que cette régulation à lieu par l'intermédiaire du facteur de transcription TGFß-1. Dans des cultures de keratinocytes Humains, la transfecticn d'une séquence oligonucléotidique similaire à celle de miR-21-3p (mimic), montre l'implication de rniR-21-3p dans des fonctions importantes pour le développement des cancers telles que le métabolisme des lipides. Dans un second chapitre, nous montrons que l'usage d'une méthode bioinformatique combinant l'expression des ARN messagers et des miRNAs permet de mettre en évidence des fonctions biologiques importantes lors de ia réponse de PPARß/ö à l'irradiation chronique. L'angiogenèse, le stress oxydatif et le métabolisme des lipides font partie de ces fonctions régulées par PPARß/5 dans la peau irradiée aux UVs. Nous mettons également en évidence la régulation du gène LpcatS par PPARß/5 dans la peau irradiée aux UV ainsi que dans des keratinocytes humains suggérant un rôle pour PPARß/5 dans le remodelage des lipides membranaires. Dans une troisième partie, nous établissons un lien entre la régulation de l'oncogène Src et l'activation de PPARß/5 dans les carcinomes spinocellulaires de la peau. Finalement dans un quatrième chapitre, nous faisons une revue des dernières recherches portées sur le rôle de PPARß/5 et de PPARa dans le foie et ia peau. En résumé ce projet de thèse représente un avancement pour la recherche sur rimplication de PPARß/5 dans la réponse aux UVs de la peau. Pour la première fois, un lien est établi entre ce facteur de transcription et la régulation de microRNAs dans le cadre du carcinome spinocellulare. Jusqu'alors resté dans l'ombre de rniR-21-5p, miR-21-3p est en fait fortement augmenté à la fois dans un modèle de souris d'irradiation aux UVs ainsi que dans ie carcinome spinocellulare chez i'humain. De nouvelles fonctions biologiques pour PPARß/5 ont été également mises en évidence dans ce travail, comme la régulation de l'angiogenèse ou du métabolisme des lipides dans Sa peau. De plus cette dissertation valorise l'intérêt d'une association entre le travail de laboratoire et celui de la bioinformatique.

The Effects of Crushed Particles in Asphalt Mixtures, HR-311 and MLR-88-16, 1990

One of the most serious impediments to the continued successful use of hot-mix asphalt (HMA) pavements is rutting. The Iowa Department of Transportation has required 85% crushed particles and 75-blow Marshall mix design in an effort to prevent rutting on Interstate roadways. Relationships between the percent of crushed particles and resistance to rutting in pavement through the use of various laboratory test procedures must be developed. HMA mixtures were made with 0, 30, 60, 85, and 100% crushed gravel, crushed limestone, and crushed quartzite combined with uncrushed sand and gravel. These aggregate combinations were used with 4, 5, and 6% asphalt cement (ac). Laboratory tests included Marshall stability, resilient modulus, indirect tensile, and creep. A creep resistance factor (CRF) was developed to provide a single numeric value for creep test results. The CRF values relate well to the amount of crushed particles and the perceived resistance to rutting. The indirect tensile test is highly dependent on the ac with a small effect from the percent of crushed particles. The Marshall stability from 75-blow compaction relates well to the percent of crushed particles. The resilient modulus in some cases is highly affected by grade of ac.

Bentonite Treatment for Economical Dust Reduction on Limestone Surfaced Secondary Roads, HR-351, 1995

This research project was directed at laboratory and field evaluation of sodium montmorillonite clay (Bentonite) as a dust palliative for limestone surfaced secondary roads. It was postulated that the electrically charged surfaces (negative) of the clay particles could interact with the charged surfaces (positive) of the limestone and act as a bonding agent to agglomerate fine (-#200) particulates, and also to bond the fine particulates to larger (+#200) limestone particles. One mile test roads were constructed in Tama, Appanoose, and Hancock counties in Iowa using Bentonite treatment levels (by weight of aggregate) ranging from 3.0 to 12.0%. Construction was accomplished by adding dry Bentonite to the surfacing material and then dry road mixing. The soda ash/water solution (dispersing agent) was spray applied and the treated surfacing material wet mixed by motor graders to a consistency of 2 to 3 inch slump concrete. Two motor graders working in tandem provided rapid mixing. Following wet mixing the material was surface spread and compacted by local traffic. Quantitative and qualitative periodic evaluations and testing of the test roads was conducted with respect to dust generation, crust development, roughness, and braking characteristics. As the Bentonite treatment level increased dust generation decreased. From a cost/benefit standpoint, an optimum level of treatment is about 8% (by weight of aggregate). For roads with light traffic, one application at this treatment level resulted in a 60-70% average dust reduction in the first season, 40-50% in the second season, and 20-30% in the third season. Crust development was rated at two times better than untreated control sections. No discernible trend was evident with respect to roughness. There was no evident difference in any of the test sections with respect to braking distance and braking handling characteristics, under wet surface conditions compared to the control sections. Chloride treatments are more effective in dust reduction in the short term (3-4 months). Bentonite treatment is capable of dust reduction over the long term (2-3 seasons). Normal maintenance blading operations can be used on Bentonite treated areas. Soda ash dispersed Bentonite treatment is estimated to be more than twice as cost effective per percent dust reduction than conventional chloride treatments, with respect to time. However, the disadvantage is that there is not the initial dramatic reduction in dust generation as with the chloride treatment. Although dust is reduced significantly after treatment there is still dust being generated. Video evidence indicates that the dust cloud in the Bentonite treated sections does not rise as high, or spread as wide as the cloud in the untreated section. It also settles faster than the cloud in the untreated section. This is considered important for driving safety of following traffic, and for nuisance dust invasion of residences and residential areas. The Bentonite appears to be functioning as a bonding agent.

Iowa Ultra Thin Whitetopping at Two Years of Age, HR-559, 1996

An 11.6 km research project was constructed in 1994 on a portion of Iowa Highway 21 in Iowa County, from U.S. 6 to Iowa Highway 212. This research is intended to evaluate the effect of four primary variables on long term performances of the PCC concrete overlay, commonly called whitetopping. The variables are thickness (50 mm, 100 mm, 150 mm, and 200 mm), joint spacing (0.6 m squares, 1.2 m squares, 1.8 m squares, and 4.6 m spacing), fiber use (concrete with and without polypropolene fibers) and surface preparation (patch only, scarifying the surface, and cold-in-place recycling). After two years, only two sections exhibit a small amount of debonding and distress cracking. Both sections are 50 mm thick. Within each of these two sections, only 2% of the area is affected. Two other 50 mm thick sections have a small number of cracks but no debonding has been found. No adverse effects of these cracks are evident. Three asphalt overlay sections were also constructed. In each asphalt section, transverse cracks have recently been found. At two years of age, the research sections are performing very well. An insignificant number of cracks and no distressed areas have been found in any research sections thicker than 50 mm.

Fine Sand for Use in PC Concrete, MLR-88-6, 1989

In several locations of Iowa, it is becoming more difficult to produce concrete sand consistently at a reasonable cost. Both ASTM and AASHTO have specifications for concrete sands that allow a finer, poorer graded sand than Iowa specifications. The objective of the study was to develop standard mix designs to permit the use of finer graded sand for PC concrete. Three hundred cylinders were made from five sands available in the state. Based on the results of the study, the following are recommended: (1) Create another class of concrete sand by: (a) lowering the current mortar strength ratio from 1.5 to 1.3, (b) raising the allowance for the percent passing one sieve and retained on the next from 40 to 45, and (c) including a provision that 25 to 60 percent passing the number 30 sieve is required for the sand; and (2) Modify the standard paving mixes with and without fly ash for use with the finer sand as follows: (a) 8% more cement and fly ash for B-2 to B-5 mixes, (b) 7% more cement and fly ash for A-2 to A-5 mixes, and (c) 5% more cement and fly ash for C-2 to C-5 mixes and water reduced mixes.

Current directions in DNA gel particles

A general understanding of interactions between DNA andoppositely charged compounds forms the basis for developing novelDNA-based materials, including gel particles. The association strength,which is altered by varying the chemical structure of the cationiccosolute, determines the spatial homogeneity of the gelation process,creating DNA reservoir devices and DNA matrix devices that can bedesigned to release either single- (ssDNA) or double-stranded(dsDNA) DNA. This paper reviews the preparation of DNA gelparticles using surfactants, proteins and polysaccharides. Particlemorphology, swelling/dissolution behaviour, degree of DNAentrapment and DNA release responses as a function of the nature ofthe cationic agent used are discussed. Current directions in thehaemocompatible and cytotoxic characterization of these DNA gelparticles have been also included.

Quantification of fine root responses to selenium toxicity

Selostus: Seleenin myrkytysoireet juurissa

Contribution of fine particulate matter sources to indoor exposure in bars, restaurants, and cafes

This study investigated the contribution of sources and establishment characteristics, on the exposure to fine particulate matter (PM(2.5)) in the non-smoking sections of bars, cafes, and restaurants in central Zurich. PM(2.5)-exposure was determined with a nephelometer. A random sample of hospitality establishments was investigated on all weekdays, from morning until midnight. Each visit lasted 30 min. Numbers of smokers and other sources, such as candles and cooking processes, were recorded, as were seats, open windows, and open doors. Ambient air pollution data were obtained from public authorities. Data were analysed using robust MM regression. Over 14 warm, sunny days, 102 establishments were measured. Average establishment PM(2.5) concentrations were 64.7 microg/m(3) (s.d. = 73.2 microg/m(3), 30-min maximum 452.2 microg/m(3)). PM(2.5) was significantly associated with the number of smokers, percentage of seats occupied by smokers, and outdoor PM. Each smoker increased PM(2.5) on average by 15 microg/m(3). No associations were found with other sources, open doors or open windows. Bars had more smoking guests and showed significantly higher concentrations than restaurants and cafes. Smokers were the most important PM(2.5)-source in hospitality establishments, while outdoor PM defined the baseline. Concentrations are expected to be even higher during colder, unpleasant times of the year. PRACTICAL IMPLICATIONS: Smokers and ambient air pollution are the most important sources of fine airborne particulate matter (PM(2.5)) in the non-smoking sections of bars, restaurants, and cafes. Other sources do not significantly contribute to PM(2.5)-levels, while opening doors and windows is not an efficient means of removing pollutants. First, this demonstrates the impact that even a few smokers can have in affecting particle levels. Second, it implies that creating non-smoking sections, and using natural ventilation, is not sufficient to bring PM(2.5) to levels that imply no harm for employees and non-smoking clients. [Authors]

Fast analysis of doping agents in urine by ultra-high-pressure liquid chromatography-quadrupole time-of-flight mass spectrometry I. Screening analysis.

The general strategy to perform anti-doping analyses of urine samples starts with the screening for a wide range of compounds. This step should be fast, generic and able to detect any sample that may contain a prohibited substance while avoiding false negatives and reducing false positive results. The experiments presented in this work were based on ultra-high-pressure liquid chromatography coupled to hybrid quadrupole time-of-flight mass spectrometry. Thanks to the high sensitivity of the method, urine samples could be diluted 2-fold prior to injection. One hundred and three forbidden substances from various classes (such as stimulants, diuretics, narcotics, anti-estrogens) were analysed on a C(18) reversed-phase column in two gradients of 9min (including two 3min equilibration periods) for positive and negative electrospray ionisation and detected in the MS full scan mode. The automatic identification of analytes was based on retention time and mass accuracy, with an automated tool for peak picking. The method was validated according to the International Standard for Laboratories described in the World Anti-Doping Code and was selective enough to comply with the World Anti-Doping Agency recommendations. In addition, the matrix effect on MS response was measured on all investigated analytes spiked in urine samples. The limits of detection ranged from 1 to 500ng/mL, allowing the identification of all tested compounds in urine. When a sample was reported positive during the screening, a fast additional pre-confirmatory step was performed to reduce the number of confirmatory analyses.

Nível de energia ultra-sônica para estudo da estabilidade de agregados de um Latossolo sob diferentes usos

O objetivo deste trabalho foi identificar o nível de energia ultra-sônica mais adequado para se detectar diferenças na estabilidade de agregados influenciada pelo uso do solo. Coletaram-se três repetições de amostras de agregados <2 mm de um Latossolo Vermelho acriférrico, típico (Latossolo Roxo), do Município de Lavras, MG, sob diferentes usos: cafezal (dois e 13 anos), culturas anuais (30 anos), pastagem (26 anos), Pinus sp. e Eucaliptus sp. (ambos com 27 anos) e mata nativa. Foram aplicados 0,0, 3,0, 9,1, 18,1, 36,3, 72,5, 108,8, 145,1 e 181,4 J mL-1 de energia ultra-sônica. Maior sensibilidade combinada a menores coeficientes de variação foram observados na faixa de 30 a 90 J mL-1, destacando-se o nível de energia de 36,3 J mL-1. Com este nível a estabilidade de agregados decresce na ordem: mata, Eucaliptus sp. e Pinus sp., pastagem e cafezal com 13 anos, culturas anuais, cafezal com dois anos. Índices de dispersão aumentam com a diminuição do carbono orgânico (r entre -0,60** e -0,83**), confirmando a importância do tipo de uso do solo na estabilidade de agregados.