The Impact of Supervisory Monitoring On High-End Retail Sales Productivity

Based on a two-stage analysis of a panel of data on 12 outlets of a high-end retailer for 24 months, we investigate how the level of supervisory monitoring affects retail sales productivity. In the first stage, we use Data Envelopment Analysis (DEA) to compute the relative productivity of retail outlets in using their labor and capital resources to generate store sales. In the second stage, we regress the logarithm of DEA scores on contextual variables to obtain consistent estimators of the impact of contextual variables on productivity (Banker and Natarajan in Operation Research 56:48-58, 2008). Contrary to agency theoretic prediction that supervisory monitoring leads to an increase in retail sales productivity, our empirical results indicate that the higher the level of supervisory monitoring, the lower is the retail sales productivity for high-end retail outlets.

Economic Evaluations of State Policies

Thesis (Ph.D.)--University of Washington, 2016-08

Efeito da disponibilidade de oxigénio na produção de bioetanol por Scheffersomyces stipitis

O bioetanol constitui uma alternativa renovável aos combustíveis fósseis. Contudo, o bioetanol de primeira geração, produzido a partir de matérias-primas alimentares, desencadeou sérios problemas económicos e sociais, pelo que é fundamental encontrar estratégias que permitam a viabilidade comercial do bioetanol de segunda geração, produzido a partir de matérias-primas lenho-celulósicas. O licor de cozimento ao sulfito ácido de árvores folhosas (HSSL) é um subproduto da indústria papeleira que, devido ao seu elevado conteúdo em açúcares, pode ser utilizado como substrato para a produção de bioetanol de segunda geração. No entanto, a maior fração dos açúcares do HSSL é composta por pentoses. Por isso, a fermentação do HSSL é realizada pela levedura Scheffersomyces stipitis, pois esta é capaz de fermentar tanto as hexoses como as pentoses. Todavia, a S. stipitis só produz etanol sob condições microaerófilas, pelo que o maior desafio da produção de bioetanol por S. stipitis reside no estabelecimento das condições ótimas de arejamento. Este trabalho teve assim por objetivo estabelecer uma estratégia de arejamento que permita a eficiente produção de bioetanol a partir de HSSL por S. stipitis C4, a qual é uma estirpe adaptada a este substrato. Deste modo, foram realizados ensaios em Erlenmeyer, de modo a caracterizar o crescimento da S. stipitis C4, e ensaios em biorreator, com vista a estudar a produção de etanol por S. stipitis C4 em duas estratégias de arejamento diferentes. Na primeira estratégia foi usado apenas um único estágio de arejamento, com controlo da tensão de oxigénio dissolvido, DOT (%), e na segunda estratégia foram usados dois estágios de arejamento, com controlo da DOT no primeiro estágio e com restrição de oxigénio no segundo estágio. Nos ensaios em Erlenmeyer com HSSL o crescimento da S. stipitis C4 foi completamente inibido. Por sua vez, nos ensaios em biorreator com um único estágio de arejamento o controlo da DOT não permitiu a produção de etanol. No entanto, nos ensaios com dois estágios de arejamento em meio sintético foi possível produzir etanol de forma eficiente. Nesta estratégia, a utilização de um maior valor de DOT no primeiro estágio de arejamento permitiu aumentar a taxa específica de crescimento máxima e o rendimento em biomassa do primeiro estágio. Para além disso, a utilização de um maior valor de DOT no primeiro estágio também permitiu aumentar a produtividade em etanol durante o segundo estágio de arejamento. Por sua vez, no segundo estágio de arejamento verificou-se que a restrição de oxigénio evitou a reassimilação de etanol pela S. stipitis C4. Deste modo, os melhores resultados para a produção de etanol foram obtidos com controlo da DOT a 50% durante o primeiro estágio e com 0 mLAr.min-1 e 250 rpm durante o segundo estágio de arejamento. A aplicação desta estratégia de arejamento a 60% HSSL/40% meio sintético permitiu obter, no primeiro estágio de arejamento, uma taxa específica de crescimento máxima de 0,17 h-1, o que demonstra que a elevada disponibilidade de oxigénio durante o primeiro estágio aumenta a tolerância da S. stipitis C4 aos inibidores. Para além disso, a taxa volumétrica de produção de etanol e o rendimento em etanol de toda a fermentação foi de respetivamente de 0,03 g.L-1.h-1 e 0,38 g.g-1. Assim, a elevada eficiência de conversão dos açúcares em etanol (74,4%) demostra que a fermentação com dois estágios de arejamento constitui uma estratégia promissora para a produção de bioetanol de segunda geração a partir de HSSL.

O argumento de inclusão enquanto política de acesso à universidade pública

There are a great number of evidences showing that education is extremely important in many economic and social dimensions. In Brazil, education is a right guaranteed by the Federal Constitution; however, in the Brazilian legislation the right to the three stages of basic education: Kindergarten, Elementary and High School is better promoted and supported than the right to education at College level. According to educational census data (INEP, 2009), 78% of all enrolments in College education are in private schools, while the reverse is found in High School: 84% of all matriculations are in public schools, which shows a contradiction in the admission into the universities. The Brazilian scenario presents that public universities receive mostly students who performed better and were prepared in elementary and high school education in private schools, while private universities attend students who received their basic education in public schools, which are characterized as low quality. These facts have led researchers to raise the possible determinants of student performance on standardized tests, such as the Brazilian Vestibular exam, to guide the development of policies aimed at equal access to College education. Seeking inspiration in North American models of affirmative action policies, some Brazilian public universities have suggested rate policies to enable and facilitate the entry of "minorities" (blacks, pardos1, natives, people of low income and public school students) to free College education. At the Federal University of the state Rio Grande do Norte (UFRN), the first incentives for candidates from public schools emerged in 2006, being improved and widespread during the last 7 years. This study aimed to analyse and discuss the Argument of Inclution (AI) - the affirmative action policy that provides additional scoring for students from public schools. From an extensive database, the Ordinary Least Squares (OLS) technique was used as well as a Quantile Regression considering as control the variables of personal, socioeconomic and educational characteristics of the candidates from the Brazilian Vestibular exam 2010 of the Federal University of the state Rio Grande do Norte (UFRN). The results demonstrate the importance of this incentive system, besides the magnitude of other variables

Parallel partitioning of unstructured meshes

A method is outlined for optimising graph partitions which arise in mapping un- structured mesh calculations to parallel computers. The method employs a combination of iterative techniques to both evenly balance the workload and minimise the number and volume of interprocessor communications. They are designed to work efficiently in parallel as well as sequentially and when combined with a fast direct partitioning technique (such as the Greedy algorithm) to give an initial partition, the resulting two-stage process proves itself to be both a powerful and flexible solution to the static graph-partitioning problem. The algorithms can also be used for dynamic load-balancing and a clustering technique can additionally be employed to speed up the whole process. Experiments indicate that the resulting parallel code can provide high quality partitions, independent of the initial partition, within a few seconds.

Mesh partitioning and load balancing for distributed memory parallel systems

A method is outlined for optimising graph partitions which arise in mapping unstructured mesh calculations to parallel computers. The method employs a relative gain iterative technique to both evenly balance the workload and minimise the number and volume of interprocessor communications. A parallel graph reduction technique is also briefly described and can be used to give a global perspective to the optimisation. The algorithms work efficiently in parallel as well as sequentially and when combined with a fast direct partitioning technique (such as the Greedy algorithm) to give an initial partition, the resulting two-stage process proves itself to be both a powerful and flexible solution to the static graph-partitioning problem. Experiments indicate that the resulting parallel code can provide high quality partitions, independent of the initial partition, within a few seconds. The algorithms can also be used for dynamic load-balancing, reusing existing partitions and in this case the procedures are much faster than static techniques, provide partitions of similar or higher quality and, in comparison, involve the migration of a fraction of the data.

Recurrent gallstone ileus: case report and literature review

The gallstone ileus is a rare complication of cholelithiasis and it represents the 1-4% of small intestinal mechanical obstruction. Gallstone is generally wedged in the terminal ileum, even if unusual locations have been described. The literature reports a very high morbidity and mortality, often because misdiagnosis or delayed diagnosis. There is no unique opinion in literature about the choice between one-stage and two-stage surgery. We report a clinical case that summarizes the diagnostic and therapeutic difficulties of gallstone ileus.

Approximate ab initio calculations and the method of molecular fragments

A two stage approach to performing ab initio calculations on medium and large sized molecules is described. The first step is to perform SCF calculations on small molecules or molecular fragments using the OPIT Program. This employs a small basis set of spherical and p-type Gaussian functions. The Gaussian functions can be identified very closely with atomic cores, bond pairs, lone pairs, etc. The position and exponent of any of the Gaussian functions can be varied by OPIT to produce a small but fully optimised basis set. The second stage is the molecular fragments method. As an example of this, Gaussian exponents and distances are taken from an OPIT calculation on ethylene and used unchanged in a single SCF calculation on benzene. Approximate ab initio calculations of this type give much useful information and are often preferable to semi-empirical approaches, since the nature of the approximations involved is much better defined.

Characterization of Non-linear Polymer Properties to Predict Process Induced Warpage and Residual Stress of Electronic Packages

Nonlinear thermo-mechanical properties of advanced polymers are crucial to accurate prediction of the process induced warpage and residual stress of electronics packages. The Fiber Bragg grating (FBG) sensor based method is advanced and implemented to determine temperature and time dependent nonlinear properties. The FBG sensor is embedded in the center of the cylindrical specimen, which deforms together with the specimen. The strains of the specimen at different loading conditions are monitored by the FBG sensor. Two main sources of the warpage are considered: curing induced warpage and coefficient of thermal expansion (CTE) mismatch induced warpage. The effective chemical shrinkage and the equilibrium modulus are needed for the curing induced warpage prediction. Considering various polymeric materials used in microelectronic packages, unique curing setups and procedures are developed for elastomers (extremely low modulus, medium viscosity, room temperature curing), underfill materials (medium modulus, low viscosity, high temperature curing), and epoxy molding compound (EMC: high modulus, high viscosity, high temperature pressure curing), most notably, (1) zero-constraint mold for elastomers; (2) a two-stage curing procedure for underfill materials and (3) an air-cylinder based novel setup for EMC. For the CTE mismatch induced warpage, the temperature dependent CTE and the comprehensive viscoelastic properties are measured. The cured cylindrical specimen with a FBG sensor embedded in the center is further used for viscoelastic property measurements. A uni-axial compressive loading is applied to the specimen to measure the time dependent Young’s modulus. The test is repeated from room temperature to the reflow temperature to capture the time-temperature dependent Young’s modulus. A separate high pressure system is developed for the bulk modulus measurement. The time temperature dependent bulk modulus is measured at the same temperatures as the Young’s modulus. The master curve of the Young’s modulus and bulk modulus of the EMC is created and a single set of the shift factors is determined from the time temperature superposition. The supplementary experiments are conducted to verify the validity of the assumptions associated with the linear viscoelasticity. The measured time-temperature dependent properties are further verified by a shadow moiré and Twyman/Green test.

L'orientation et la propriété de mémoire de forme des polymères cristallins liquides à chaînes latérales covalents et supramoléculaires

In many studies of the side-chain liquid crystalline polymers (SCLCPs) bearing azobenzene mesogens as pendant groups, obtaining the orientation of azobenzene mesogens at a macroscopic scale as well as its control is important, because it impacts many properties related to the cooperative motion characteristic of liquid crystals and the trans-cis photoisomerization of the azobenzene molecules. Various means can be used to align the mesogens in the polymers, including rubbed surface, mechanical stretching or shearing, and electric or magnetic field. In the case of azobenzene-containing SCLCPs, another method consists in using linearly polarized light (LPL) to induce orientation of azobenzene mesogens perpendicular to the polarization direction of the excitation light, and such photoinduced orientation has been the subject of numerous studies. In the first study realized in this thesis (Chapter 1), we carried out the first systematic investigation on the interplay of the mechanically and optically induced orientation of azobenzene mesogens as well as the effect of thermal annealing in a SCLCP and a diblock copolymer comprising two SCLCPs bearing azobenzene and biphenyl mesogens, respectively. Using a supporting-film approach previously developed by our group, a given polymer film can be first stretched in either the nematic or smectic phase to yield orientation of azobenzene mesogens either parallel or perpendicular to the strain direction, then exposed to unpolarized UV light to erase the mechanically induced orientation upon the trans–cis isomerization, followed by linearly polarized visible light for photoinduced reorientation as a result of the cis–trans backisomerization, and finally heated to different LC phases for thermal annealing. Using infrared dichroism to monitor the change in orientation degree, the results of this study have unveiled complex and different orientational behavior and coupling effects for the homopolymer of poly{6-[4-(4-methoxyphenylazo)phenoxy]hexyl methacrylate} (PAzMA) and the diblock copolymer of PAzMA-block- poly{6-[4-(4-cyanophenyl) phenoxy]hexyl methacrylate} (PAzMA-PBiPh). Most notably for the homopolymer, the stretching-induced orientation exerts no memory effect on the photoinduced reorientation, the direction of which is determined by the polarization of the visible light regardless of the mechanically induced orientation direction in the stretched film. Moreover, subsequent thermal annealing in the nematic phase leads to parallel orientation independently of the initial mechanically or photoinduced orientation direction. By contrast, the diblock copolymer displays a strong orientation memory effect. Regardless of the condition used, either for photoinduced reorientation or thermal annealing in the liquid crystalline phase, only the initial stretching-induced perpendicular orientation of azobenzene mesogens can be recovered. The reported findings provide new insight into the different orientation mechanisms, and help understand the important issue of orientation induction and control in azobenzene-containing SCLCPs. The second study presented in this thesis (Chapter 2) deals with supramolecular side-chain liquid crystalline polymers (S-SCLCPs), in which side-group mesogens are linked to the chain backbone through non-covalent interactions such as hydrogen bonding. Little is known about the mechanically induced orientation of mesogens in S-SCLCPs. In contrast to covalent SCLCPs, free-standing, solution-cast thin films of a S-SCLCP, built up with 4-(4’-heptylphenyl) azophenol (7PAP) H-bonded to poly(4-vinyl pyridine) (P4VP), display excellent stretchability. Taking advantage of this finding, we investigated the stretching-induced orientation and the viscoelastic behavior of this S-SCLCP, and the results revealed major differences between supramolecular and covalent SCLCPs. For covalent SCLCPs, the strong coupling between chain backbone and side-group mesogens means that the two constituents can mutually influence each other; the lack of chain entanglements is a manifestation of this coupling effect, which accounts for the difficulty in obtaining freestanding and mechanically stretchable films. Upon elongation of a covalent SCLCP film cast on a supporting film, the mechanical force acts on the coupled polymer backbone and mesogenic side groups, and the latter orients cooperatively and efficiently (high orientation degree), which, in turn, imposes an anisotropic conformation of the chain backbone (low orientation degree). In the case of the S-SCLCP of P4VP-7PAP, the coupling between the side-group mesogens and the chain backbone is much weakened owing to the dynamic dissociation/association of the H-bonds linking the two constituents. The consequence of this decoupling is readily observable from the viscoelastic behavior. The average molecular weight between entanglements is basically unchanged in both the smectic and isotropic phase, and is similar to non-liquid crystalline samples. As a result, the S-SCLCP can easily form freestanding and stretchable films. Furthermore, the stretching induced orientation behavior of P4VP-7PAP is totally different. Stretching in the smectic phase results in a very low degree of orientation of the side-group mesogens even at a large strain (500%), while the orientation of the main chain backbone develops steadily with increasing the strain, much the same way as amorphous polymers. The results imply that upon stretching, the mechanical force is mostly coupled to the polymer backbone and leads to its orientation, while the main chain orientation exerts little effect on orienting the H-bonded mesogenic side groups. This surprising finding is explained by the likelihood that during stretching in the smectic phase (at relatively higher temperatures) the dynamic dissociation of the H-bonds allow the side-group mesogens to be decoupled from the chain backbone and relax quickly. In the third project (Chapter 3), we investigated the shape memory properties of a S-SCLCP prepared by tethering two azobenzene mesogens, namely, 7PAP and 4-(4'-ethoxyphenyl) azophenol (2OPAP), to P4VP through H-bonding. The results revealed that, despite the dynamic nature of the linking H-bonds, the supramolecular SCLCP behaves similarly to covalent SCLCP by exhibiting a two-stage thermally triggered shape recovery process governed by both the glass transition and the LC-isotropic phase transition. The ability for the supramolecular SCLCP to store part of the strain energy above T[subscript g] in the LC phase enables the triple-shape memory property. Moreover, thanks to the azobenzene mesogens used, which can undergo trans-cis photoisomerization, exposure the supramolecular SCLCP to UV light can also trigger the shape recovery process, thus enabling the remote activation and the spatiotemporal control of the shape memory. By measuring the generated contractile force and its removal upon turning on and off the UV light, respectively, on an elongated film under constant strain, it seems that the optically triggered shape recovery stems from a combination of a photothermal effect and an effect of photoplasticization or of an order-disorder phase transition resulting from the trans-cis photoisomerization of azobenzene mesogens.

Numerical encoding to tame SQL injection attacks.

Recent years have seen an astronomical rise in SQL Injection Attacks (SQLIAs) used to compromise the confidentiality, authentication and integrity of organisations’ databases. Intruders becoming smarter in obfuscating web requests to evade detection combined with increasing volumes of web traffic from the Internet of Things (IoT), cloud-hosted and on-premise business applications have made it evident that the existing approaches of mostly static signature lack the ability to cope with novel signatures. A SQLIA detection and prevention solution can be achieved through exploring an alternative bio-inspired supervised learning approach that uses input of labelled dataset of numerical attributes in classifying true positives and negatives. We present in this paper a Numerical Encoding to Tame SQLIA (NETSQLIA) that implements a proof of concept for scalable numerical encoding of features to a dataset attributes with labelled class obtained from deep web traffic analysis. In the numerical attributes encoding: the model leverages proxy in the interception and decryption of web traffic. The intercepted web requests are then assembled for front-end SQL parsing and pattern matching by applying traditional Non-Deterministic Finite Automaton (NFA). This paper is intended for a technique of numerical attributes extraction of any size primed as an input dataset to an Artificial Neural Network (ANN) and statistical Machine Learning (ML) algorithms implemented using Two-Class Averaged Perceptron (TCAP) and Two-Class Logistic Regression (TCLR) respectively. This methodology then forms the subject of the empirical evaluation of the suitability of this model in the accurate classification of both legitimate web requests and SQLIA payloads.

Simulação numérica do escoamento monofásico em uma bomba centrífuga radial

Centrifugal pumps are vastly used in many industrial applications. Knowledge of how these components behave in several circumstances is crucial for the development of more efficient and, therefore, less expensive pumping installations. The combination of multiple impellers, vaned diffusers and a volute might introduce several complex flow characteristics that largely deviate from regular inviscid pump flow theory. Computational Fluid Dynamics can be very helpful to extract information about which physical phenomena are involved in such flows. In this sense, this work performs a numerical study of the flow in a two-stage centrifugal pump (Imbil ITAP 65-330/2) with a vaned diffuser and a volute. The flow in the pump is modeled using the software Ansys CFX, by means of a multi-block, transient rotor-stator technique, with structured grids for all pump parts. The simulations were performed using water and a mixture of water and glycerin as work fluids. Several viscosities were considered, in a range between 87 and 720 cP. Comparisons between experimental data obtained by Amaral (2007) and numerical head curves showed a good agreement, with an average deviation of 6.8% for water. The behavior of velocity, pressure and turbulence kinetic energy fields was evaluated for several operational conditions. In general, the results obtained by this work achieved the proposed goals and are a significant contribution to the understanding of the flow studied.

A New Genetic Algorithm for Set Covering Problems

An indirect genetic algorithm for the non-unicost set covering problem is presented. The algorithm is a two-stage meta-heuristic, which in the past was successfully applied to similar multiple-choice optimisation problems. The two stages of the algorithm are an ‘indirect’ genetic algorithm and a decoder routine. First, the solutions to the problem are encoded as permutations of the rows to be covered, which are subsequently ordered by the genetic algorithm. Fitness assignment is handled by the decoder, which transforms the permutations into actual solutions to the set covering problem. This is done by exploiting both problem structure and problem specific information. However, flexibility is retained by a self-adjusting element within the decoder, which allows adjustments to both the data and to stages within the search process. Computational results are presented.

Do Pré-escolar ao 1.º Ciclo: O percurso da escrita

Relatório de Estágio apresentado à Escola Superior de Educação de Paula Frassinetti para obtenção de grau de Mestre em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico

Coordinated pricing and inventory management

This dissertation mainly focuses on coordinated pricing and inventory management problems, where the related background is provided in Chapter 1. Several periodic-review models are then discussed in Chapters 2,3,4 and 5, respectively. Chapter 2 analyzes a deterministic single-product model, where a price adjustment cost incurs if the current selling price is changed from the previous period. We develop exact algorithms for the problem under different conditions and find out that computation complexity varies significantly associated with the cost structure. %Moreover, our numerical study indicates that dynamic pricing strategies may outperform static pricing strategies even when price adjustment cost accounts for a significant portion of the total profit. Chapter 3 develops a single-product model in which demand of a period depends not only on the current selling price but also on past prices through the so-called reference price. Strongly polynomial time algorithms are designed for the case without no fixed ordering cost, and a heuristic is proposed for the general case together with an error bound estimation. Moreover, our illustrates through numerical studies that incorporating reference price effect into coordinated pricing and inventory models can have a significant impact on firms' profits. Chapter 4 discusses the stochastic version of the model in Chapter 3 when customers are loss averse. It extends the associated results developed in literature and proves that the reference price dependent base-stock policy is proved to be optimal under a certain conditions. Instead of dealing with specific problems, Chapter 5 establishes the preservation of supermodularity in a class of optimization problems. This property and its extensions include several existing results in the literature as special cases, and provide powerful tools as we illustrate their applications to several operations problems: the stochastic two-product model with cross-price effects, the two-stage inventory control model, and the self-financing model.