Um modelo de unit commitment hidrotérmico para o ambiente de mercados de energia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho de sistema composto por reatores anaeróbios em série seguido de filtro biológico percolador no tratamento de águas residuárias de suinocultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicación de un tratamiento biológico a las aguas residuales provenientes de una destilería de alcohol de caña, utilizando un reactor UASB

En este trabajo se llevó a cabo el tratamiento de vinazas mediante dos tecnologías anaerobias. Se dividió en cuatro estudios técnicos. El primero fue el arranque y estabilización del reactor UASB (Upflow Anaerobic Sludge Blanket), en dónde se evaluó la estabilización mediante la eficiencia de remoción de DQO y la granulación del lodo. El segundo estudio evaluó el rendimiento del reactor UASB frente a diferentes Cva. El tercer estudio evaluó el efecto del TRH sobre la eficiencia del reactor UASB, y el cuarto de ellos fue evaluar el rendimiento del RABF (Reactor Anaerobio de Biomasa Fija). El reactor UASB de 2,6 L de capacidad, fue arrancado por lotes, con seis ensayos utilizando vinaza como sustrato. Se obtuvieron eficiencias de remoción en DQO en un rango de 79-91%, en los seis lotes. Se obtuvo formación de gránulos con diámetro (Ø) de 0,85-1,15 mm y un coeficiente de esfericidad (Є) de 0,7-0,77. Se logró la granulación de lodos tras 2 meses de operación. Alcanzada la estabilización del reactor UASB, se siguió una operación en flujo continuo. Las Cva probadas de 1, 2, 4 y 6 gDQO/L.d para el reactor UASB dan una respuesta bastante favorable con respecto al rendimiento del reactor, ya que presento eficiencias de remoción de DQOs del 51 hasta el 76%, eficiencias similares a los reportados por la literatura. En el estudio de TRH se operó con Cva de 6 gDQO/L.d y los TRH fueron de 24, 12 ,5 ,3 y 1 día. El % de eliminación de DQO fue de 51, 60, 57, 60 y 63 % remoción en DQOsoluble, respectivamente. Se alcanzó una producción de biogás máximo de 5.283 ml/d, pero al reducir el TRH se observó una reducción proporcional del volumen total de biogás. El %CH4 contenido en el biogás aumento al disminuir el TRH, reflejando valores de 80 al 92 % de CH4. El RABF con un volumen de 8,2 L, utilizo tubos de plástico corrugado como medio de soporte para las bacterias. Se aplicaron las siguientes Cva; 0,5, 1, 3 y 6 gDQO/L.d. El reactor RABF presento una excelente remoción de la materia orgánica (80% DQOs), una producción de biogás estable, y un contenido en CH4 del biogás muy interesante. Sin embargo, para una Cva superior a 3 gDQO/L.d empezó un comportamiento inesperado de reducción de capacidad. Las condiciones hidrodinámicas del reactor UASB son decisivas para la formación de los gránulos, condición previa para iniciar el flujo continuo. Al operar el reactor UASB en modo continuo, se pudo evaluar las mejores condiciones de operación para este tipo de residuo (vinaza). La Cva de 6 gDQO/L.d para el reactor UASB alimentado con vinaza bruta representa el límite de su capacidad. Sin embargo, al aumentar la Cva se genera una mayor producción de biogás y metano. La eficiencia de remoción de la DQO soluble es independiente del TRH, para una Cva de 6 g DQO/L•d y las condiciones de TRH probadas (24, 12, 5, 3 y 1 días). Los valores de remoción de DQO alcanzados son un poco superior a los valores de biodegradabilidad anaerobia de la vinaza observados de 50 %. De manera general, la reducción del TRH o bien la dilución de la vinaza no presenta un efecto significativo sobre la remoción de la materia orgánica soluble, pero si lo presenta en la remoción de sulfatos reduciendo indirectamente su toxicidad. El soporte termoplástico inoculado en el RABF y alimentado con vinaza bruta, actuó como un filtro, además de obtener buenos resultados en eliminación de DQO, pero dada las dimensiones y la altura del relleno se frena la evacuación del metano. This work was carried out by treatment vinasses with two anaerobic technologies. It was divided into four technical studies. The first was the start up and stabilization Upflow Anaerobic Sludge Blanket (UASB) reactor, where the stability was evaluated by the removal efficiency of COD and sludge granulation. The second study evaluated the performance of the UASB reactor against different OLR. The third study evaluated the effect of HRT on the efficiency of the UASB reactor, and the fourth of which was evaluate the performance Fixed Biomass Anaerobic (FBA) reactor. The UASB reactor of 2,6 L capacity, was started in batch, with six assays using vinasse as substrate. Were obtained removal efficiencies of COD in the range of 79- 91% in the six batches. Forming granules were obtained with a diameter (Ø) of 0,85- 1,15 mm and sphericity coefficient (Є) of 0,7 to 0,77. Sludge granulation was achieved after 2 months of operation. Once stabilization is achieved of the UASB reactor, it was followed by a continuous flow operation. The OLR tested 1, 2, 4 and 6 gCOD/L.d for UASB reactor gives a very favorable response regarding the performance of the reactor, as presented COD5 removal efficiencies of 51 to 76%, similar efficiencies those reported in the literature The HRT study was operated with an OLR of 6 gCOD/L.d and HRT were 24, 12, 5, 3 and 1 day. The removal efficiency was 51, 60, 57, 60 and 63% in soluble COD, respectively. It reached a maximum biogas production of 5.283 ml / d, but by reducing the HRT showed a proportional reduction in the total volume of biogas. The %CH4 content in the biogas increased with decreasing TRH, reflecting values of 80 to 92% of CH4. The FBA reactor with a volume of 8,2 L, used corrugated plastic tubes as carrier for bacteria transportation. The following OLR was applied, 0,5, 1, 3 and 6 gCOD/L.d. The FBA reactor showed an excellent removal of organic matter (80% CODS), a stable biogas production, and CH4 content very interesting. However, for more than 3 gCOD/L.d OLR began with unexpected behavior of capacity reduction. The UASB reactor hydrodynamic conditions are decisive for the formation of the granules, precondition to start the continuous flow. By operating the UASB reactor in continuous mode, it was possible to evaluate the best operating conditions for this type of waste (vinasse). The OLR of 6 gCOD/L.d for the UASB reactor fed with raw vinasse represents the limit of its capacity. However, with increasing OLR creates increased biogas production and methane. The removal efficiency of soluble COD is independent of HRT for OLR of 6 gCOD/L.d and HRT conditions tested (24, 12, 5, 3 and 1 day). COD Removal values achieved are slightly higher than the values of the vinasse anaerobic biodegradability of observed at 50%. Generally, reduction of HRT or vinasse dilution does not present a significant effect on the removal of the soluble organic matter; however if it occurs in the removal of sulfate reducing indirectly its toxicity. The thermoplastic support inoculated in FBA reactor and fed with raw vinasse, acted as a filter, in addition to obtaining good results in COD removal, but given the size and height of the filling slows evacuation of methane.

Hydrodynamic phenomena in the downcomer during flow rate transients in the primary circuit of a PWR

Mixing phenomena observed when the flow rate in a single loop of the primary circuit is changed can influence the operation of pressurized water reactor (PWR) by inducing local gradients of boron concentration or coolant temperature. Analysis of one-dimensional Laser Doppler Anemometry (LDA) measurements during the start-up and shutdown of pump on a single loop of the ROCOM test facility has been performed. The effect of a step change and a ramped change in the flow rate on the axial and azimuthal velocities was examined. Numerical simulations were also performed for the step change in the flow rate that gave quantitative agreement with the axial velocities. Phenomenological agreement was made on the turbulent kinetic energy; however, observed values were a factor of 2.5 less than the turbulent kinetic energy derived from the measurements. © 2007.

Dynamic model development of adiabatic compressed air energy storage

The share of variable renewable energy in electricity generation has seen exponential growth during the recent decades, and due to the heightened pursuit of environmental targets, the trend is to continue with increased pace. The two most important resources, wind and insolation both bear the burden of intermittency, creating a need for regulation and posing a threat to grid stability. One possibility to deal with the imbalance between demand and generation is to store electricity temporarily, which was addressed in this thesis by implementing a dynamic model of adiabatic compressed air energy storage (CAES) with Apros dynamic simulation software. Based on literature review, the existing models due to their simplifications were found insufficient for studying transient situations, and despite of its importance, the investigation of part load operation has not yet been possible with satisfactory precision. As a key result of the thesis, the cycle efficiency at design point was simulated to be 58.7%, which correlated well with literature information, and was validated through analytical calculations. The performance at part load was validated against models shown in literature, showing good correlation. By introducing wind resource and electricity demand data to the model, grid operation of CAES was studied. In order to enable the dynamic operation, start-up and shutdown sequences were approximated in dynamic environment, as far as is known, the first time, and a user component for compressor variable guide vanes (VGV) was implemented. Even in the current state, the modularly designed model offers a framework for numerous studies. The validity of the model is limited by the accuracy of VGV correlations at part load, and in addition the implementation of heat losses to the thermal energy storage is necessary to enable longer simulations. More extended use of forecasts is one of the important targets of development, if the system operation is to be optimised in future.

Estudio del tratado de libre comercio Colombia – Estados Unidos: Iowa, Kansas, Kentucky, Luisiana y Maine

Con el proceso de globalización que se evidencia actualmente, el comercio entre países ha sido uno de los factores más relevantes a través del tiempo y Colombia no ha sido excluyente a esta situación. Es por la importancia del asunto, que la Escuela de Administración dentro de sus múltiples proyectos de investigación busca la identificación de oportunidades para PYMES colombianas en mercados extranjeros, específicamente en Estados Unidos, asumiendo los retos que trae consigo un Tratado de Libre Comercio, las implicaciones en cuanto a los procesos de intercambio (importaciones y exportaciones) en sus diversos ámbitos y el impacto que genera dicho proceso en la balanza comercial colombiana. Debido a esto, se ha propuesto el desarrollo de un trabajo de grado que analice el Tratado de Libre Comercio (TLC) entre Colombia y Estados Unidos, enfocándose en los perfiles de cada mercado y las necesidades de los mismos, con el fin de identificar oportunidades generadas desde su puesta en marcha. En busca de un análisis detallado, el trabajo en mención hace énfasis en cinco estados de Estados Unidos (Iowa, Kansas, Kentucky, Luisiana y Maine) y los 32 departamentos de Colombia. Con el objetivo de realizar un análisis más efectivo se tomaron en cuenta las características de cada mercado y su relación comercial. A partir del previo proceso de investigación, se pretende identificar y definir oportunidades comerciales que evidencian una evolución comercial (mayor número de importaciones y exportaciones). Dichas oportunidades identificadas son el resultado de un análisis cualitativo tras desarrollar matrices de los principales diez productos más demandados por los Estados mencionados y los principales productos ofertados por los departamentos colombianos. Gracias a lo que enmarca un TLC dentro de un proceso de negociación, se proyecta identificar según las necesidades de las partes, es decir, oferta y demanda de bienes y/o 9 servicios, cada una de las oportunidades claves para los comerciantes nacionales que se involucran dentro del acuerdo aprobado.

Bidding Decision of Wind-Thermal GenCo in Day-Ahead Market

This paper deals with the self-scheduling problem of a price-taker having wind and thermal power production and assisted by a cyber-physical system for supporting management decisions in a day-ahead electric energy market. The self-scheduling is regarded as a stochastic mixed-integer linear programming problem. Uncertainties on electricity price and wind power are considered through a set of scenarios. Thermal units are modelled by start-up and variable costs, furthermore constraints are considered, such as: ramp up/down and minimum up/down time limits. The stochastic mixed-integer linear programming problem allows a decision support for strategies advantaging from an effective wind and thermal mixed bidding. A case study is presented using data from the Iberian electricity market.

A technology diffusion perspective of Enterprise Resource Planning across European Small and Medium Enterprises: from determinants to Use to Value

Tese apresentada como requisito parcial para obtenção do grau de Doutor em Gestão de Informação

Small firms, growth and financial constraints

This paper analyses the impact of different sources of finance on the growth of firms. Using panel data from Spanish manufacturing firms for the period 2000-2006, we investigate the effects of internal and external finances on firm growth. In particular, we examine three dimensions of these financial sources: a) the performance of the firms’ capital structure in accordance with firm size; b) the effects of internal and external financial sources on growth performance; c) the combined effect of equity, external debt and cash flow on firm growth. We find that low-growth firms are sensitive to cash flow and short-term bank debt, while high-growth firms are more sensitive to long-term debt. Furthermore, equity capital seems to reduce barriers to external finance. Our main conclusion is that during the start-up phase, firms are unable to increase their financial leverage and so their capital structure fails to promote correct investment strategies. However, as their equity capital increases, alternative financial mechanisms, in particular long-term debt, become available, which have a positive impact on firm growth.

A Web-Based Environmental Toolkit to Support Small and Medium-Sized Enterprises in the Implementation of Their Own Environmental Management System

With small and medium sized-enterprises (SMEs) taking up the majority of the global businesses, it is important they act in an environmentally responsible manner. Environmental management systems (EMS) help companies evaluate and improve their environmental impact but they often require human, financial, and temporary resources that not all SMEs can provide. This research encompasses interviews with representatives of two small enterprises in Germany to provide insights into their understanding, and knowledge of an EMS and how they perceive their responsibility towards the environment. Furthermore, it presents a toolkit created especially for small and medium-sized enterprises that serves as a simplified version of an EMS based on the ISO 14001 standard and is evaluated by the representatives of the SMEs. Some of the findings are: while being open to the idea of improving their environmental impact, SMEs do not always feel it is their responsibility to do so; they seem to lack the means to fully implement an EMS. The developed toolkit is considered useful and usable and recommendations are drawn for its future enhancement.

Financing Small and Medium Enterprises in Myanmar

Small and medium enterprises (SMEs) share the biggest part in Myanmar economy in terms of number, contribution to employment, output, and investment. Myanmar economic growth is thus totally dependent on the development of SMEs in the private sector. Today, the role of SMEs has become more vital in strengthening national competitive advantage and the speedy economic integration into the ASEAN region. However, studies show that SMEs have to deal with a number of constraints that hinder their development potential, such as the shortage in power supply, unavailability of long-term credit from external sources and many others. Among them, the financing problem of SMEs is one of the biggest constraints. Such is deeply rooted in demand and supply issues, macroeconomic fundamentals, and lending infrastructure of the country. The government’s policy towards SMEs could also lead to insufficient support for the SMEs. Thus, focusing on SMEs and private sector development as a viable strategy for industrialization and economic development of the country is a fundamental requirement for SME development. This paper recommends policies for stabilizing macro economic fundamentals, improving lending infrastructures of the country and improving demand- and supply-side conditions from the SMEs financing perspective in order to provide a more accessible financing for SMEs and to contribute in the overall development of SMEs in Myanmar thereby to sharpen national competitive advantage in the age of speedy economic integration.

Paving the Way for Micro-, Small- and Medium-Sized Enterprises in the Southern Mediterranean. CEPS Policy Brief No. 314, 14 January 2014

The upheavals of the Arab Spring in the southern Mediterranean led to domestic and international demands on the governments in the region to implement reforms aimed at enhancing business and investment conditions especially for micro, small- and medium-sized enterprises (MSMEs), which carry out an overwhelming majority of the region’s economic activity. A comprehensive survey among some 600 high-growth potential MSMEs in Algeria, Egypt, Morocco and Tunisia identified and ranked the key obstacles impeding their high-growth potential. This Policy Brief summarises the main results and policy recommendations that can be drawn from this survey, which has been analysed in depth by Ayadi & De Groen (2014).

Micro-, Small- and Medium-Sized Enterprises with High-Growth Potential in the Southern Mediterranean: Identifying Obstacles and Policy Responses. CEPS Paperbacks. January 2014

The Arab Spring, which took root in Tunisia and Egypt in the beginning of 2011 and gradually spread to other countries in the southern Mediterranean, highlighted the importance of private-sector development, job creation, improved governance and a fairer distribution of economic opportunities. The developments led to domestic and international calls for the region’s governments to implement the needed reforms to enhance business and investment conditions, modernise their economies and support the development of enterprises. Central to these demands are calls to enhance the growth prospects of micro-, small- and medium-sized enterprises (MSMEs), which represent an overwhelming majority of the region’s economic activity.

Marketing in indigenous and Asian small firms in the West Midlands.

This study is concerned with examining the application of marketing during the start-up, development and growth of small firms in the West Midlands. As an exploratory study, it provides evidence to support the central hypothesis of the thesis that whilst many small firms have the potential to progress through to the successful growth stage of development, they fail to do so because of their owner-managers' orientation towards production and selling and because they do not apply formal marketing during the initial stages of business development. A comparative approach to studying marketing in indigenous and Asian firms is adopted in an attempt to fill a gap in the literature on the characteristics and differences in the formation and development processes of these two groups of enterprises. The study has three main objectives and is based on qualitative research techniques of in-depth interviews, case studies and longitudinal studies among sixty-six firms representing the key activities of the small firms sector of the local economy. Firstly, it investigates owner-managers' orientation in developing and managing new and established businesses and explores the sources of, and changes in their orientation during the various stages of development. Secondly, it assesses the owner-manager's awareness and understanding of what constitutes the marketing function and investigates what aspects of marketing are applied during the different stages of business development. Finally, the study monitors and evaluates the outcomes and implications of applying formal marketing techniques in a small sample of firms over a period of two years. The thesis concludes by using the findings of the study to contribute additions to existing models of growth and by proposing new models of evolution and application of marketing in small firms.

Knowledge transfer in product development processes: A case study in small and medium enterprises (SMEs) of the metal-mechanic sector from Sao Paulo, Brazil

This paper reports a research that evaluated the product development methodologies used in Brazilian small and medium-sized metal-mechanic enterprises (SMEs), in a specific region of Sao Paulo. The tool used for collecting the data was a questionnaire, which was developed and applied through interviews conducted by the researchers in 32 companies. The main focus of this paper can be condensed in the synthesis-question ""Is only the company responsible for the development?"" which was analyzed thoroughly. The results obtained from this analysis were evaluated directly (through the respective percentages of answers) and statistically (through the search of an index which demonstrates if two questions are related). The results point to a degree of maturity in SMEs, which allows product development to be conducted in cooperation networks. (C) 2007 Elsevier Ltd. All rights reserved.