933 resultados para self-determined motivation
Resumo:
Resumo: Cement, as well as the remaining constituents of self-compacting mortars, must be carefully selected, in order to obtain an adequate composition with a granular mix as compact as possible and a good performance in the fresh state (self-compacting effect) and the hardened state (mechanical and durability-related behavior). Therefore in this work the possibility of incorporating nano particles in self-compacting mortars was studied. Nano materials are very reactive due mostly to their high specific surface and show a great potential to improve the properties of these mortars, both in mechanical and durability terms. In this work two nano materials were used, nano silica (nano SiO2) in colloidal state and nano titanium (nano TiO2) in amorphous state, in two types of self-compacting mortars (ratio binder:sand of 1:1 and 1:2). The self-compacting mortar mixes have the same water/cement ratio and 30% of replacement of cement with fly ashes. The influence of nano materials nano-SiO2 and nano-TiO2 on the fresh and hardened state properties of these self-compacting mortars was studied. The results show that the use of nano materials in repair and rehabilitation mortars has significant potential but still needs to be optimized. (C) 2015 Elsevier Ltd. All rights reserved.
Resumo:
Abstract Self-compacting concrete (SCC) can soon be expected to replace conventional concrete due to its many advantages. Its main characteristics in the fresh state are achieved essentially by a higher volume of mortar (more ultrafine material) and a decrease of the coarse-aggregates. The use of over-large volumes of additions such as fly ash (FA) and/or limestone filler (LF) can substantially affect the concrete's pore structure and consequently its durability. In this context, an experimental programme was conducted to evaluate the effect on the concrete's porosity and microstructure of incorporating FA and LF in binary and ternary mixes of SCC. For this, a total of 11 SCC mixes were produced: 1 with cement only (C); 3 with C + FA in 30%, 60% and 70% substitution (fad); 3 with C + LF in 30%, 60% and 70% fad; 4 with C + FA + LF in combinations of 10-20%, 20-10%, 20-40% and 40-20% fad, respectively. The results enabled conclusions to be established regarding the SCC's durability, based on its permeability and the microstructure of its pore structure. The properties studied are strongly affected by the type and quantity of additions. The use of ternary mixes also proves to be extremely favourable, confirming the beneficial effect of the synergy between these additions. © 2015 Elsevier Ltd. All rights reserved.
Resumo:
This paper presents the results of a study on the behaviour of self-compacting concrete (SCC) in the fresh and hardened states, produced with binary and ternary mixes of fly ash (FA) and limestone filler (LF), using the method proposed by Nepomuceno. His method determines the SCC composition parameters in the mortar phase (self-compacting mortar - SCM) easily and efficiently, whilst guaranteeing the SCC properties in both the fresh and hardened states. For this, 11 SCMs were studied: one with cement (C) only; three with FA at 30%, 60% and 70% C substitution; three with LF at 30%, 60% and 70% C substitution; four with FA + LF in combinations of 10-20%, 20-10%, 20-40% and 40-20% C substitution. Once the composition of these mortars was defined, 18 SCC mixes were produced: 14 binary SCC mixes were produced with the seven binary mortar mixes, and four ternary SCC mixes were produced with the four ternary mortar mixes. In addition to the methodology proposed by Nepomuceno, the combined use of FA and LF in ternary mixtures was tested. The results confirmed that the method could yield SCC with adequate properties in both the fresh and hardened states. It was also possible to determine the SCC composition parameters in the mortar phase (self-compacting mortar - SCM) that will guarantee the SCC properties in both the fresh and hardened states, as confirmed through the optimized behaviour of the SCC in the fresh state and the promising results in the hardened state (compressive strength). The potential demonstrated by the joint use of LF and FA through the synergetic interaction of both additions is emphasized.
Resumo:
This work studies the effect of incorporating fine recycled aggregates on the rheology of self-compacting concrete over time (at 15,45 and 90 min). The fine fraction of the natural aggregates was replaced at 0%, 20%, 50% and 100% with recycled sand. The fresh-state properties were studied by empirical tests (slump-flow, J-Ring, L-Box) and fundamental ones in an ICAR rheometer. The mixes with 50% and 100% recycled sand lost their SCC characteristics at 90 min. Contrarily the mix with 20% replacement maintained suitable passing and filling ability. The causes of this trend were an initial increase of plastic viscosity and afterwards an increase of yield stress. The compressive strength of the 50% and 100% replacement mixes decreased significantly and that of the 20% replacement mix less than 10%. (C) 2015 Elsevier Ltd. All rights reserved.
Resumo:
This paper is about a design of an urban area Darrieus VAWT, having self-start ability due to an innovative profile design named EN0005, avoiding the need of extra components or external electricity feed-in. An approach is presented to study the ability of a blade profile to offer self-start ability. Methodologies applied for the blade body and for profile development are reported. Field tests and main conclusions are presented to persuade for the arrangement of this design. (C) 2015 Elsevier Ltd. All rights reserved.
Resumo:
This paper is on the self-scheduling problem for a thermal power producer taking part in a pool-based electricity market as a price-taker, having bilateral contracts and emission-constrained. An approach based on stochastic mixed-integer linear programming approach is proposed for solving the self-scheduling problem. Uncertainty regarding electricity price is considered through a set of scenarios computed by simulation and scenario-reduction. Thermal units are modelled by variable costs, start-up costs and technical operating constraints, such as: forbidden operating zones, ramp up/down limits and minimum up/down time limits. A requirement on emission allowances to mitigate carbon footprint is modelled by a stochastic constraint. Supply functions for different emission allowance levels are accessed in order to establish the optimal bidding strategy. A case study is presented to illustrate the usefulness and the proficiency of the proposed approach in supporting biding strategies. (C) 2014 Elsevier Ltd. All rights reserved.
Resumo:
RESUMO - Introdução: As Reacções Adversas Medicamentosas (RAMs) constituem um grave problema de Saúde Pública em termos da mortalidade e morbilidade provocadas, tendo também um impacto económico considerável nos Sistemas de Saúde. Os Sistemas de Notificacão Espontânea de RAMs são considerados como o método de vigilância de medicamentos mais eficaz, sendo a sub-notificação de RAMs uma das suas maiores limitações. Em termos globais, foi estimado que apenas 6% de todas as reacções adversas são notificadas. Portugal apresenta uma taxa de notificação de RAMs relativamente baixa quando comparada com os países mais notificadores da Europa. São objectivos deste estudo: 1) caracterizar as atitudes e os comportamentos dos médicos, dos farmacêuticos e dos enfermeiros em Portugal Continental relativamente à notificação de RAMs; e 2) caracterizar a efectividade de intervenções educacionais destinadas a reduzir a sub-notificação de RAMs. Métodos: Numa primeira fase será efectuado um estudo de caso-controlo em médicos, farmacêuticos e enfermeiros de Portugal Continental, a exercer actividade no Servico Nacional de Saúde (SNS), de modo a caracterizar as suas atitudes e comportamentos relativamente à notificação de RAMs. Como casos serão considerados os Profissionais de Saúde que notificaram pelo menos uma RAM num determinado período e os controlos os Profissionais de Saúde que não notificaram qualquer RAM nesse mesmo período, sendo estes útimos seleccionados aleatoriamente. O estudo será conduzido através de um questionário de auto-resposta, em que as questões relativas às atitudes e comportamentos são baseadas nos “sete pecados mortais” de Inman. Será utilizada uma Escala Visual Analógica para registar as respostas, podendo estas ir de zero (totalmente em desacordo) até 10 (totalmente de acordo). Será utilizada uma análise de regressão logística para determinar o odds ratio ajustado (ORadj) da notificação de RAMs para uma mudança de exposição correspondente ao range interquartil para cada atitude. Numa segunda fase, será efectuado ensaio aleatorizado controlado de cluster, para caracterizar a efectividade das intervenções educacionais realizadas sobre as causas identificadas na primeira parte do trabalho, com o intuito de reduzir a sub-notificação de RAMs. Com base em informacão de 2007 foram identificados 43 clusters dispersos pelas várias Regiões de Saúde. As intervenções educacionais são compostas por uma apresentação com uma hora de duração complementada por um folheto recordatório. Serão ainda realizados dois sub-estudos, em que o V1.0, Final 28Set09 viii Sub-notificação de RAMs em Portugal – Um problema com solução ? primeiro tentará caracterizar o efeito de contaminação entre Profissionais de Saúde e o segundo pretende caracterizar a duração do efeito das intervenções educacionais. Resultados a atingir: Pretende-se, com a implementação deste projecto, aumentar o número de notificações de RAMs pelos médicos, farmacêuticos e enfermeiros em cerca de 110%, de modo a atingir-se uma taxa de notificação de aproximadamente 300 notificações por milhão de habitantes por ano (i.e., multiplicar por 2,1 o número notificações existentes). -------------------ABSTRACT - Introduction: The Adverse Drug Reactions (ADRs) are a serious Public Health problem in terms of mortality and morbidity caused, being also an economic burden for the health systems. The Spontaneous Adverse Event Reporting Systems are considered as the most effective drug surveillance methods, in which the ADR under-reporting represents one of its biggest limitations. It was estimated that only 6% of all adverse reactions are notified globally. When comparing with high ADR reporting rate countries Portugal shows a low ADR reporting rate. This study aims to: 1) characterize the physicians, pharmacists and nurses attitudes and behaviours related to ADR under-reporting; 2) characterize the educational interventions effectiveness to decrease the ADRs under-reporting. Methods: During a first phase a case-control study will be conducted in physicians, pharmacists and nurses in Continental Portugal working in the National Health System (NHS) in order to characterize their attitudes and behaviours related to ADR reporting. The Healthcare Professionals that have reported at least one ADR during a determined period will be considered as the cases and those that have not reported any ADR during the same period will be considered as the controls. The controls will be randomly selected. The study will be conducted through a self-administered questionnaire in which the questions related to the attitudes and behaviours are based in the Inmans’s “seven mortal sins”. A Visual Analogue Scale will be used to record the responses. The responses can range from 0 (totally disagree) to 10 (totally agree). Logistic regression will be used to determine the ADR reporting adjusted odds ratio (ORadj) for a change in the exposure corresponding to the interquartile range for each attitude. In the second phase of the study a cluster-randomized controlled trial will be conducted to characterize the educational interventions effectiveness focused on the first phase identified causes with the aim to decrease the ADRs under-reporting. Based in 2007’s information 43 clusters have been identified throughout the several Health Regions. The educational interventions are composed of one hour presentation complemented by an informational leaflet. Two sub-studies will be also conducted in which the first one will try to characterize the contamination effect between the Healthcare Professionals and the second to characterize the educational interventions effect duration. V1.0, Final 28Set09 x Sub-notificação de RAMs em Portugal – Um problema com solução ? Outcome: With the project implementation an increase of the ADR notifications performed by the physicians, pharmacists and nurses by 110% is aimed in order to obtain approximately 300 notifications per million habitants per year (i.e., multiply by 2,1 the existent notifications).
Resumo:
Volunteers working in different areas or different NPO (Non-profit Organisations) are significantly different according to several variables, namely in terms of motivation, satisfaction and permanence. Thus, the main goal of this research is to understand volunteers’ motivations and the influence of the context on it. Additionally, demographic variables might have an important impact on volunteers’ activities, be an important predictor of volunteering and, at the same time, influence their time commitment. In this paper we present data from twelve different NPO - 10 hospitals and 2 food banks. The model of data collection was a survey conducted by self-administered questionnaire. The results showed significant differences between the volunteers’ belonging to the two organisations and their motivations, confirming that volunteer’ motivations differ according the type/nature of organisation; this is particularly important because the field in which one works is influenced by a self-evident affinity with shared ideologies, religious convictions, and collective identities. These results present important outcomes that should be reflected in the way organisations act. Keywords: Volunteering; Occasional and permanent volunteers; Motivations; Non-profit organisations.
Resumo:
Current Manufacturing Systems challenges due to international economic crisis, market globalization and e-business trends, incites the development of intelligent systems to support decision making, which allows managers to concentrate on high-level tasks management while improving decision response and effectiveness towards manufacturing agility. This paper presents a novel negotiation mechanism for dynamic scheduling based on social and collective intelligence. Under the proposed negotiation mechanism, agents must interact and collaborate in order to improve the global schedule. Swarm Intelligence (SI) is considered a general aggregation term for several computational techniques, which use ideas and inspiration from the social behaviors of insects and other biological systems. This work is primarily concerned with negotiation, where multiple self-interested agents can reach agreement over the exchange of operations on competitive resources. Experimental analysis was performed in order to validate the influence of negotiation mechanism in the system performance and the SI technique. Empirical results and statistical evidence illustrate that the negotiation mechanism influence significantly the overall system performance and the effectiveness of Artificial Bee Colony for makespan minimization and on the machine occupation maximization.
Resumo:
New homoditopic bis-calix[4]arene-carbazole conjugates, armed with hydrophilic carboxylic acid functions at their lower rims, are disclosed. Evidence for their self-association in solution was gathered from solvatochromic and thermochromic studies, as well as from gel-permeation chromatography analysis. Their ability to function as highly sensitive sensors toward polar electron-deficient aromatic compounds is demonstrated.
Resumo:
Cellulose and its derivatives, such as hydroxypropylcellulose (HPC) have been studied for a long time but they are still not well understood particularly in liquid crystalline solutions. These systems can be at the origin of networks with properties similar to liquid crystalline (LC) elastomers. The films produced from LC solutions can be manipulated by the action of moisture allowing for instance the development of a soft motor (Geng et al., 2013) driven by humidity. Cellulose nanocrystals (CNC), which combine cellulose properties with the specific characteristics of nanoscale materials, have been mainly studied for their potential as a reinforcing agent. Suspensions of CNC can also self-order originating a liquid-crystalline chiral nematic phases. Considering the liquid crystalline features that both LC-HPC and CNC can acquire, we prepared LC-HPC/CNC solutions with different CNC contents (1,2 and 5 wt.%). The effect of the CNC into the LC-HPC matrix was determined by coupling rheology and NMR spectroscopy - Rheo-NMR a technique tailored to analyse orientational order in sheared systems. (C) 2015 Elsevier Ltd. All rights reserved.
Resumo:
Power law (PL) distributions have been largely reported in the modeling of distinct real phenomena and have been associated with fractal structures and self-similar systems. In this paper, we analyze real data that follows a PL and a double PL behavior and verify the relation between the PL coefficient and the capacity dimension of known fractals. It is to be proved a method that translates PLs coefficients into capacity dimension of fractals of any real data.
Resumo:
With the help of a unique combination of density functional theory and computer simulations, we discover two possible scenarios, depending on concentration, for the hierarchical self-assembly of magnetic nanoparticles on cooling. We show that typically considered low temperature clusters, i.e. defect-free chains and rings, merge into more complex branched structures through only three types of defects: four-way X junctions, three-way Y junctions and two-way Z junctions. Our accurate calculations reveal the predominance of weakly magnetically responsive rings cross-linked by X defects at the lowest temperatures. We thus provide a strategy to fine-tune magnetic and thermodynamic responses of magnetic nanocolloids to be used in medical and microfluidics applications.
Resumo:
The basic objective of this work is to evaluate the durability of self-compacting concrete (SCC) produced in binary and ternary mixes using fly ash (FA) and limestone filler (LF) as partial replacement of cement. The main characteristics that set SCC apart from conventional concrete (fundamentally its fresh state behaviour) essentially depend on the greater or lesser content of various constituents, namely: greater mortar volume (more ultrafine material in the form of cement and mineral additions); proper control of the maximum size of the coarse aggregate; use of admixtures such as superplasticizers. Significant amounts of mineral additions are thus incorporated to partially replace cement, in order to improve the workability of the concrete. These mineral additions necessarily affect the concrete’s microstructure and its durability. Therefore, notwithstanding the many well-documented and acknowledged advantages of SCC, a better understanding its behaviour is still required, in particular when its composition includes significant amounts of mineral additions. An ambitious working plan was devised: first, the SCC’s microstructure was studied and characterized and afterwards the main transport and degradation mechanisms of the SCC produced were studied and characterized by means of SEM image analysis, chloride migration, electrical resistivity, and carbonation tests. It was then possible to draw conclusions about the SCC’s durability. The properties studied are strongly affected by the type and content of the additions. Also, the use of ternary mixes proved to be extremely favourable, confirming the expected beneficial effect of the synergy between LF and FA. © 2015 RILEM.
Resumo:
Trabalho de Projecto apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Auditoria, sob a orientação da Doutora Alcina Augusta de Sena Portugal Dias. “Esta versão contém as críticas e sugestões dos elementos do júri”