Effect of N and K doses in nutritive solution on growth, production and coffee bean size

An adequate supply of nutrients is essential for obtaining high yields of coffee. The objective of this study was to evaluate the effect of N, K and the N:K ratio on vegetative and reproductive growth of coffee. For this purpose, coffee plants were grown in nutrient solution containing K in the concentrations of 1.08; 2.15; 3.23 and 5.38 mmol L-1 combined with a dose of 6 mmol L-1 N, resulting in the N:K ratios (w/w): 1:0.5; 1:1; 1:1.5 and 1:2.5. The control treatment consisted of the doses 3 and 1.61 mmol L-1 of N and K respectively, resulting in the N:K ratio (w/w) 1.0:1.5. The following variables were evaluated: height, stem diameter, number of nodes of the eighth plagiotrofic branch (index branch), pairs of plagiotrofic branches and number of nodes in the orthotropic branch every three weeks from the beginning of the experiment. Additionally, it was evaluated the chemical composition of processed beans and leaves between the flowering and the rapid expansion stage of the cherry beans, production of cherry beans per plant and classification of beans according to the size. N influenced mainly the characteristics of vegetative growth and K influenced mainly the reproductive growth evaluated by the production. The lowest production resulted in the highest percentages of beans retained on sieves with holes larger than 16/64", while the highest production promoted an increase in the percentage of beans retained on sieves with holes smaller than 16/64".

Shape and size of jatropha beans (Jatropha curcas L.) during drying at different temperatures

This study was carried out to study the physical properties of the jatropha beans over the drying under six air conditions, based on measurements of roundness, sphericity, volume, superficial area, projected area and surface/volume ratio. Jatropha beans with moisture content around 0.61 (decimal d.b.) were subjected to thin-layer drying in oven with forced-air circulation under six temperature conditions (36, 45, 60, 75, 90 and 105 °C) and relative humidity of 31.7; 19.6; 9.4; 4.8; 2.6 and 1.5% respectively, until reaching the moisture content of 0.11 ± 0.006 (decimal d. b.). The results showed that the necessary time for jatropha beans to reach the moisture content of 0.11 ± 0.006 (decimal d.b.) were 1.5; 2.25; 3.0; 4.75; 6.75 and 12.0 h for the drying temperatures of 105, 90, 75, 60, 45 and 36 °C, respectively; and the reduction in the moisture content as well as the drying conditions promoted changes in the shape and reduced the size of the jatropha beans.

Determination of reactivity rates of silicate particle-size fractions

The efficiency of sources used for soil acidity correction depends on reactivity rate (RR) and neutralization power (NP), indicated by effective calcium carbonate (ECC). Few studies establish relative efficiency of reactivity (RER) for silicate particle-size fractions, therefore, the RER applied for lime are used. This study aimed to evaluate the reactivity of silicate materials affected by particle size throughout incubation periods in comparison to lime, and to calculate the RER for silicate particle-size fractions. Six correction sources were evaluated: three slags from distinct origins, dolomitic and calcitic lime separated into four particle-size fractions (2, 0.84, 0.30 and <0.30-mm sieves), and wollastonite, as an additional treatment. The treatments were applied to three soils with different texture classes. The dose of neutralizing material (calcium and magnesium oxides) was applied at equal quantities, and the only variation was the particle-size material. After a 90-day incubation period, the RER was calculated for each particle-size fraction, as well as the RR and ECC of each source. The neutralization of soil acidity of the same particle-size fraction for different sources showed distinct solubility and a distinct reaction between silicates and lime. The RER for slag were higher than the limits established by Brazilian legislation, indicating that the method used for limes should not be used for the slags studied here.

The impact of size and age of the company on assessing financial risk

Textiles and tourism sectors are two important sectors in Portuguese economy. Its high exposure to both internal and international economy volatility transform the companies operating in these economic sectors especially vulnerable to recent economic crises in Portugal and European Union. The objective of this paper is to evaluate and understand the impact of size and age on the financial health of textile and tourism companies, measured by economic indices. An empirical based model is proposed. Its implications are derived and tested on a sample of 4061 Portuguese companies from textile and tourism sector, during the period 2005-2009. The results conclude that age has a stronger impact on the risk of failure than size. Whereas the effect of age is generally positive regarding the financial health of the company, the effect of size is less clear and depends on the age of the company.

The impact of size and age of the company on assessing financial risk.

Textiles and tourism sectors are two important sectors in Portuguese economy. Its high exposure to both internal and international economy volatility transform the companies operating in these economic sectors especially vulnerable to recent economic crises in Portugal and European Union. The objective of this paper is to evaluate and understand the impact of size and age on the financial health of textile and tourism companies, measured by economic indices. An empirical based model is proposed. Its implications are derived and tested on a sample of 4061 Portuguese companies from textile and tourism sector, during the period 2005-2009. The results conclude that age has a stronger impact on the risk of failure than size. Whereas the effect of age is generally positive regarding the financial health of the company, the effect of size is less clear and depends on the age of the company.

O peso do varejo, o peso no varejo e a identidade: uma análise de consumidoras plus size

Este trabalho estuda o conceito de identidade sob a ótica do consumo feminino de moda plus size. Foram realizadas 14 entrevistas fenomenológicas, observadas por uma perspectiva hermenêutica. Três categorias temáticas emergiram dos dados: a construção da identidade pela moda, o que envolve ser plus size e estratégias criativas para lidar com a configuração do portfólio de produtos no varejo, que não favorece mulheres plus size. Entre os principais resultados, destacam-se a forma pela qual o termo plus size age como estigma, influenciando os projetos identitários das consumidoras, o papel do varejo na estigmatização e a saga quase epopeica das compras, que envolve até um "mercado negro" com as vendedoras.

The population of Brazil

In 1970 the population of Brazil with 94,508,554 inhabitants was extreme youth, since 42.67% was composed of children under 14 years old. In that year the proportion of female was 50.2%. The population density increased from 1.17 inhabitants /km² in 1872 to 11.18 in 1970, and in this last year the range was 1.03 in the North region and 43.90 in the South-East region. The urban population increased from 31.24% in 1940 to 55.98% in 1970 and for the first time the rural population was smaller than the urban population. In 1950 concerning with marital status 39% of the population 15 years old and over was single and 54% married. In 1970 this rate was respectively 35.4% and 56.6%. The population economically inactive increased from 49.17% in 1940 to 52.24% in 1970. The literacy ratio increased from 43% in 1940, to 48% in 1950 and 68.04% in 1970. The crude birth rate was 43/1000 live births in 1950 and fell to 37.7/1000 in 1970. The fertility rate decreased from 179.3/1000 women (15-49 years old} to 156.7/1000 in 1960/70. The crude death rate decreased from 20.60/1000 inhabitants in 1940/50 to 9.4/1000 in 1960/70. The infant mortality rate still remains high: 171/1000 live births in 1940/50 and 170/1000 in 1971. Concerning with the size of the cities, 8 in 1940 had 100,000 or more inhabitants and in 1970 this number increased to 94 cities. The population growth increased from 2.38% in 1940/50, to 2.99% in 1950/60 and 2.83% in 1960./70. Brazil is the first country in population size in Latin America and the eighth in the world. Concerning his area, Brazil is the fifth country in size.

A new sedimentary benchmark for the Deccan Traps volcanism?

The origin of the Cretaceous-Paleogene boundary (KPB) mass extinction is still the center of acrimonious debates by opposing partisans of the bolide impact theory to those who favored a terrestrial origin linked to the Deccan Traps volcanism. Here we apply an original and high-resolution environmental magnetic study of the reference Bidart section, France. Our results show that the KPB is identified by an abrupt positive shift of the magnetic susceptibility (MS), also observed by others at the KPB elsewhere. In addition, an anomalous interval of very low MS, carried by an unknown Cl-bearing iron oxide similar to specular hematite, is depicted just below the KPB. Grain-size and morphology of the Cl-iron oxide are typically in the range of hematitic dust currently transported by winds from Sahara to Europe. This discovery is confirmed in the referenced Gubbio section (Italy) suggesting a global scale phenomenon. As a conjecture we suggest an origin by heterogeneous reaction between HCl-rich volcanic gas and liquid-solid aerosols within buoyant atmospheric plumes formed above the newly emitted Deccan flood basalts. Based on this hypothesis, our discovery provides a new benchmark for the Deccan volcanism and witnesses the nature and importance of the related atmospheric change.

Laser scanned photodiodes (LSPs) for image sensing

An optimized ZnO:Al/a-pin SixC1-x:H/Al configuration for the laser scanned photodiode (LSP) imaging detector is proposed and the read-out parameters improved. The effect of the sensing element structure, cell configuration and light source flux are investigated and correlated with the sensor output characteristics. Data reveals that for sensors with wide band gap doped layers an increase on the image signal optimized to the blue is achieved with a dynamic range of two orders of magnitude, a responsivity of 6 mA W-1 and a sensitivity of 17 muW cm(-2) at 530 nm. The main output characteristics such as image responsivity, resolution, linearity and dynamic range were analyzed under reverse, forward and short circuit modes. The results show that the sensor performance can be optimized in short circuit mode. A trade-off between the scan time and the required resolution is needed since the spot size limits the resolution due to the cross-talk between dark and illuminated regions leading to blurring effects.

Volatility forecasting with range models: An evaluation of new alternatives to the CARR model

The aim of this paper is to analyze the forecasting ability of the CARR model proposed by Chou (2005) using the S&P 500. We extend the data sample, allowing for the analysis of different stock market circumstances and propose the use of various range estimators in order to analyze their forecasting performance. Our results show that there are two range-based models that outperform the forecasting ability of the GARCH model. The Parkinson model is better for upward trends and volatilities which are higher and lower than the mean while the CARR model is better for downward trends and mean volatilities.

Monetary and fiscal policies interactions in a monetary union with country-size asymmetry

Within a country-size asymmetric monetary union, idiosyncratic shocks and national fiscal stabilization policies cause asymmetric cross-border effects. These effects are a source of strategic interactions between noncoordinated fiscal and monetary policies: on the one hand, due to larger externalities imposed on the union, large countries face less incentives to develop free-riding fiscal policies; on the other hand, a larger strategic position vis-à-vis the central bank incentives the use of fiscal policy to, deliberately, influence monetary policy. Additionally, the existence of non-distortionary government financing may also shape policy interactions. As a result, optimal policy regimes may diverge not only across the union members, but also between the latter and the monetary union. In a two-country micro-founded New-Keynesian model for a monetary union, we consider two fiscal policy scenarios: (i) lump-sum taxes are raised to fully finance the government budget and (ii) lump-sum taxes do not ensure balanced budgets in each period; therefore, fiscal and monetary policies are expected to impinge on debt sustainability. For several degrees of country-size asymmetry, we compute optimal discretionary and dynamic non-cooperative policy games and compare their stabilization performance using a union-wide welfare measure. We also assess whether these outcomes could be improved, for the monetary union, through institutional policy arrangements. We find that, in the presence of government indebtedness, monetary policy optimally deviates from macroeconomic to debt stabilization. We also find that policy cooperation is always welfare increasing for the monetary union as a whole; however, indebted large countries may strongly oppose to this arrangement in favour of fiscal leadership. In this case, delegation of monetary policy to a conservative central bank proves to be fruitful to improve the union’s welfare.

The spin polarization of CrO2 revisited

Here, we use Andreev reflection spectroscopy to study the spin polarization of high quality CrO2 films. We study the spin polarization as a function of growth temperature, resulting in grain size and electrical resistivity. In these films low temperature growth appears to be a necessary but not sufficient condition to guarantee the observation of high spin polarization, and this is only observed in conjunction with suppressed superconducting gap values and anomalously low interface properties. We suggest that this combination of observations is a manifestation of the long range spin triplet proximity effect. (C) 2007 American Institute of Physics.

Stabilization constraints from different-average public debt levels in a Monetary Union with country-size asymmetry

In the sequence of the recent financial and economic crisis, the recent public debt accumulation is expected to hamper considerably business cycle stabilization, by enlarging the budgetary consequences of the shocks. This paper analyses how the average level of public debt in a monetary union shapes optimal discretionary fiscal and monetary stabilization policies and affects stabilization welfare. We use a two-country micro-founded New-Keynesian model, where a benevolent central bank and the fiscal authorities play discretionary policy games under different union-average debt-constrained scenarios. We find that high debt levels shift monetary policy assignment from inflation to debt stabilization, making cooperation welfare superior to noncooperation. Moreover, when average debt is too high, welfare moves directly (inversely) with debt-to-output ratios for the union and the large country (small country) under cooperation. However, under non-cooperation, higher average debt levels benefit only the large country.

The condensation and ordering of models of empty liquids

We consider a simple model consisting of particles with four bonding sites ("patches"), two of type A and two of type B, on the square lattice, and investigate its global phase behavior by simulations and theory. We set the interaction between B patches to zero and calculate the phase diagram as the ratio between the AB and the AA interactions, epsilon(AB)*, varies. In line with previous work, on three-dimensional off-lattice models, we show that the liquid-vapor phase diagram exhibits a re-entrant or "pinched" shape for the same range of epsilon(AB)*, suggesting that the ratio of the energy scales - and the corresponding empty fluid regime - is independent of the dimensionality of the system and of the lattice structure. In addition, the model exhibits an order-disorder transition that is ferromagnetic in the re-entrant regime. The use of low-dimensional lattice models allows the simulation of sufficiently large systems to establish the nature of the liquid-vapor critical points and to describe the structure of the liquid phase in the empty fluid regime, where the size of the "voids" increases as the temperature decreases. We have found that the liquid-vapor critical point is in the 2D Ising universality class, with a scaling region that decreases rapidly as the temperature decreases. The results of simulations and theoretical analysis suggest that the line of order-disorder transitions intersects the condensation line at a multi-critical point at zero temperature and density, for patchy particle models with a re-entrant, empty fluid, regime. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3657406]

A new control strategy with saturation effect compensation for an autonomous induction generator drivenby wide speed range turbines

This paper presents a variable speed autonomous squirrel cage generator excited by a current-controlled voltage source inverter to be used in stand-alone micro-hydro power plants. The paper proposes a system control strategy aiming to properly excite the machine as well as to achieve the load voltage control. A feed-forward control sets the appropriate generator flux by taking into account the actual speed and the desired load voltage. A load voltage control loop is used to adjust the generated active power in order to sustain the load voltage at a reference value. The control system is based on a rotor flux oriented vector control technique which takes into account the machine saturation effect. The proposed control strategy and the adopted system models were validated both by numerical simulation and by experimental results obtained from a laboratory prototype. Results covering the prototype start-up, as well as its steady-state and dynamical behavior are presented. (C) 2011 Elsevier Ltd. All rights reserved.