Bottom-up risk regulation? How nanotechnology risk knowledge gaps challenge federal and state environmental agencies

Nanotechnologies have been called the "Next Industrial Revolution." At the same time, scientists are raising concerns about the potential health and environmental risks related to the nano-sized materials used in nanotechnologies. Analyses suggest that current U.S. federal regulatory structures are not likely to adequately address these risks in a proactive manner. Given these trends, the premise of this paper is that state and local-level agencies will likely deal with many "end-of-pipe" issues as nanomaterials enter environmental media without prior toxicity testing, federal standards, or emissions controls. In this paper we (1) briefly describe potential environmental risks and benefits related to emerging nanotechnologies; (2) outline the capacities of the Toxic Substances Control Act, the Clean Air Act, the Clean Water Act, and the Resources Conservation and Recovery Act to address potential nanotechnology risks, and how risk data gaps challenge these regulations; (3) outline some of the key data gaps that challenge state-level regulatory capacities to address nanotechnologies' potential risks, using Wisconsin as a case study; and (4) discuss advantages and disadvantages of state versus federal approaches to nanotechnology risk regulation. In summary, we suggest some ways government agencies can be better prepared to address nanotechnology risk knowledge gaps and risk management.

The evolving role of information specialists:change agents in process redesign

The research investigates the past, present and potential future role of Information Specialists (ISps) in process oriented companies. It tests the proposition that ISps in companies that have undertaken formal process reengineering exercises are likely to become more proactive and more business oriented (as opposed to technically oriented) than they had previously been when their organisations were organised along traditional, functional lines. A review of existing literature in the area of Business Process Reengineering and Information Management reveals a lack of consensus amongst researchers concerning the appropriate role for ISps during and after BPR. Opinion is divided as to whether IS professionals should reactively support BPR or whether IT/IS developments should be driving these initiatives. A questionnaire based ‘Descriptive Survey’ with 60 respondents is used as a first stage of primary data gathering. This is followed by follow-up interviews with 20 of the participating organisations to gather further information on their experiences. The final stage of data collection consists of further in-depth interview with four case study companies to provide an even richer picture of their experiences. The results of the questionnaire are analysed and displayed in the form of simple means, frequencies and bar graphs. The ‘NU-DIST’ computer based discourse analysis package was tried in relation to summarising the interview findings, but this proved cumbersome and a visual collation method is preferred. Overall, the researcher contends that the supposition outlined above is proven, and she concludes the research by suggesting the implications of these findings. In particular she offers a ‘Framework for Understanding and Action’ which is deemed to be relevant to both practitioners and future researchers.

Enhancing creativity in a general work environment : the role of problem-solving demand

Prior research suggests management can employ cognitively demanding job attributes to promote employee creativity. However, it is not clear what specific type of cognitive demand is particularly important for creativity, what processes underpin the relationship between demanding job conditions and creativity and what factors lead to employee perceptions of demanding job attributes. This research sets out to address the aforementioned issues by examining: (i) problem-solving demand (PDS), a specific type of cognitive demand, and the processes that link PSD to creativity, and (ii) antecedents to PSD. Based on social cognitive theory, PSD was hypothesized to be positively related to creativity through the motivational mechanism of creative self-efficacy. However, the relationship between PSD and creative self-efficacy was hypothesized to be contingent on levels of intrinsic motivation. Social information processing perspective and the job crafting model were used to identify antecedents of PSD. Consequently, two social-contextual factors (supervisor developmental feedback and job autonomy) and one individual factor (proactive personality) were hypothesized to be precursors to PSD perceptions. The theorized model was tested with data obtained from a sample of 270 employees and their supervisors from 3 organisations in the People’s Republic of China. Regression results revealed that PSD was positively related to creativity but this relationship was partially mediated by creative self-efficacy. Additionally, intrinsic motivation moderated the relationship between PSD and creative self-efficacy such that the relationship was stronger for individuals high rather than low in intrinsic motivation. The findings represent a productive first step in identifying a specific cognitive demand that is conducive to employee creativity. In addition, the findings contribute to the literature by identifying a psychological mechanism that may link cognitively demanding job attributes and creativity.

Employability management needs analysis and the ICT sector in Europe:the case of small and medium-sized enterprises

The purpose of this paper is to deal with the outcomes of a so-called “employability management needs analysis” that is meant to provide more insight into current employability management activities and its possible benefits for Information and Communication Technology (ICT) professionals working in Small- and Medium-sized enterprises (SMEs) throughout Europe. A considerable series of interviews (N=107) were conducted with managers in SMEs in seven European countries, including Germany, Greece, Italy, the Netherlands, Norway, Poland, and the UK. A semi-structured interview protocol was used during the interviews to cover three issues: employability (13 items), ageing (8 items), and future developments and requirements (13 items). Analysis of all final interview transcriptions was at a national level using an elaborate common coding scheme. Although an interest in employability emerged, actual policy and action lagged behind. The recession in the ICT sector at the time of the investigation and the developmental stage of the sector in each participating country appeared connected. Ageing was not seen as a major issue in the ICT sector because managers considered ICT to be a relatively young sector. There appeared to be a serious lack of investment in the development of expertise of ICT professionals. Generalization of the results to large organizations in the ICT sector should be made with caution. The interview protocol developed is of value for further research and complements survey research undertaken within the employability field of study. It can be concluded that proactive HRM (Human Resource Management) policies and strategies are essential, even in times of economic downturn. Employability management activities are especially important in the light of current career issues. The study advances knowledge regarding HRM practices adopted by SMEs in the ICT sector, especially as there is a gap in knowledge about career development issues in that particular sector.

The interaction between the implementation of an occupational health and safety management system and safety culture:a case study in the rubber industry

A prominent theme emerging in Occupational Health and Safety (OSH) is the development of management systems. A range of interventions, according to a prescribed route detailed by one of the management systems, can be introduced into an organisation with some expectation of improved OSH performance. This thesis attempts to identify the key influencing factors that may impact upon the process of introducing interventions, (according to B88800: 1996, Guide to Implementing Occupational Health and Safety Management Systems) into an organisation. To help identify these influencing factors a review of possible models from the sphere of Total Quality Management (TQM) was undertaken and the most suitable TQM model selected for development and use in aSH. By anchoring the aSH model's development in the reviewed literature a range ofeare, medium and low level influencing factors were identified. This model was developed in conjunction with the research data generated within the case study organisation (rubber manufacturer) and applied to the organisation. The key finding was that the implementation of an OSH intervention was dependant upon three broad vectors of influence. These are the Incentive to introduce change within an organisation which refers to the drivers or motivators for OSH. Secondly the Ability within the management team to actually implement the changes refers to aspects, amongst others, such as leadership, commitment and perceptions of OSH. Ability is in turn itself influenced by the environment within which change is being introduced. TItis aspect of Receptivity refers to the history of the plant and characteristics of the workforce. Aspects within Receptivity include workforce profile and organisational policies amongst others. It was found that the TQM model selected and developed for an OSH management system intervention did explain the core influencing factors and their impact upon OSH performance. It was found that within the organisation the results that may have been expected from implementation of BS8800:1996 were not realised. The OSH model highlighted that given the organisation's starting point, a poor appreciation of the human factors of OSH, gave little reward for implementation of an OSH management system. In addition it was found that general organisational culture can effectively suffocate any attempts to generate a proactive safety culture.

The pro-reform movement led by Avenir de la Francaise:a point of leverage in the French political process?

The study examines factors influencing language planning decisions in contemporary France. It focuses upon the period 1992-1994, which witnessed the introduction of two major language policy measures, the first an amendment to the French Constitution, in 1992, proclaiming the language of the Republic as French, the second, in 1994, legislation to extend the ambit of the loi Bas-Lauriol, governing the use of the French language in France. The thesis posits a significant role for the pro-reform movement led by the French language association Avenir de la Langue Francaise (ALF) in the introduction and formulation of the policy measures concerned. The movement is depicted as continuing the traditional pattern of intellectual involvement in language planning, whilst also marking the beginning of a highly proactive, and increasingly political approach. Detailed examination of the movement's activities reveals that contextual factors and strategic strength combined to facilitate access to the levers of power, and enabled those involved to exert an impact on policy initiation, formulation, and ultimately implementation. However, ALF's decision to pursue the legislative route led to the expansion of the network of actors involved in language policymaking, and the development of counter-pressure from sectoral groups. It is suggested that this more interventionist approach destabilised the traditionally consensual language policy community, and called into question the quasi-monopoly of the intelligentsia in respect of language policymaking. It raised broader questions relating to freedom of expression and the permissible limits of language regulation in a democracy such as France. It also exposed ongoing ambiguities and inconsistencies in the interpretation of the tenets of language planning.

Marketing resources of actively involved exporters

The purpose of this dissertation is to examine the impact of the market orientation and market based resources of actively involved exporters and their distributors on export venture performance. Previous literature in marketing channels has examined the effect of the market orientation of suppliers and their distributors on supplier-distributor relationships, mainly in a domestic context, as well as the impact of the quality of their relationship on business performance in domestic and international contexts. Little or no research focuses on the interplay between the relevant marketing resources, such as market orientation, proactive market orientation, selling, pricing reputation, and market innovation, of an export venture and their distributor, and consequently on export venture performance. This dissertation is mainly a quantitative study using a mail survey among Greek exporting firms in various industries. The final sample comprised 190 exporting ventures. The survey was enhanced through open interviews with export venture managers and their respective distributors and was pre-tested with a small-scale dyadic survey. Survey data were analysed using structural equation modelling. The main research objective was to assess the impact of marketing support resources, namely market orientation and proactive market orientation, and market-based resources of an export venture and its distributor on export performance. In addition, the relationship of marketing support resources of the export venture and those of the distributor was examined. Some of the relationships examined are a migration of traditional domestic theory (Hooley et al. 2005), to an exporting context, testing whether there are differences in the relationships in a different context. This study contributes to the resource-based view, marketing, and export business literature, as findings indicate that high levels of export venture proactive market orientation lead to distributors with high levels of market orientation. In line with findings of domestic context research, the proactive market orientation of the venture renders its market orientation statistically not significant.

Representing religion in the European Union:a typology of actors

For the first time in the history of the acquis communautaire, the Lisbon Treaty institutionalises an ‘open, transparent and regular dialogue’ between European institutions and ‘churches, religions and communities of conviction’. Drawing on a comparative analysis of 120 religious and convictional actors which have been in contact with European institutions from 1957 until today, this article proposes four types of relations between religious/convictional representations and European institutions, namely, private–public, experimental, proactive and institutionalised. It argues that the Lisbon institutionalisation of religious dialogue enhances the public visibility of the European Commission and, most significantly, of the construction of the European political system.

Shaken not stirred:mixing semantics into XPDL

Ubiquitous computing requires lightweight approaches to coordinating tasks distributed across smart devices. We are currently developing a semantic workflow modelling approach that blends the proven robustness of XPDL with semantics to support proactive behaviour. We illustrate the potential of the model through an example based on mixing a dry martini.

Novel sol–gel preparation of (P2O5)0.4–(CaO)0.25–(Na2O)X–(TiO2)(0.35−X) bioresorbable glasses (X = 0.05, 0.1, and 0.15)

Quaternary phosphate-based glasses in the P2O5–CaO–Na2O–TiO2 system with a fixed P2O5 and CaO content of 40 and 25 mol% respectively have been successfully synthesised via sol–gel method and bulk, transparent samples were obtained. The structure, elemental proportion, and thermal properties of stabilised sol–gel glasses have been characterised using X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), 31P nuclear magnetic resonance (31P NMR), titanium K-edge X-ray absorption near-edge structure (XANES), fourier transform infrared (FTIR) spectroscopy, and differential thermal analysis (DTA). The XRD results confirmed the amorphous nature for all stabilized sol–gel derived glasses. The EDX result shows the relatively low loss of phosphorus during the sol–gel process and Ti K-edge XANES confirmed titanium in the glass structure is in mainly six-fold coordination environment. The 31P NMR and FTIR results revealed that the glass structure consist of mainly Q1 and Q2 phosphate units and the Ti4+ cation was acting as a cross-linking between phosphate units. In addition DTA results confirmed a decrease in the glass transition and crystallisation temperature with increasing Na2O content. Ion release studies also demonstrated a decrease in degradation rates with increasing TiO2 content therefore supporting the use of these glasses for biomedical applications that require a degree of control over glass degradation. These sol–gel glasses also offer the potential to incorporate proactive molecules for drug delivery application due to the low synthesis temperature employed.

What can higher education contribute to improving social mobility in the UK?

At a time when the UK may slowly be emerging out of what, for many in higher education, has been a period of ‘unprecedented change’ (Universities UK, 2012) in which institutions have found themselves having to balance increases in student expectations and demands against decreases in funding and resources, this special edition focuses on an issue that is becoming ever-more important – that of the relationship between social mobility and higher education. Drawing upon the findings of the Higher Education Academy’s March 2013 Conference: What can higher education contribute to improving social mobility in the UK?, the six papers gathered here give between them a clear indication of the proactive and synergetic manner in which the sector is responding to the resource and funding challenges which it currently faces.

Telehealth Approach for Glaucoma Progression Monitoring

This paper presents a Web-Centric [3] extension to a previously developed glaucoma expert system that will provide access for doctors and patients from any part of the world. Once implemented, this telehealth solution will publish the services of the Glaucoma Expert System on the World Wide Web, allowing patients and doctors to interact with it from their own homes. This web-extension will also allow the expert system itself to be proactive and to send diagnosis alerts to the registered user or doctor and the patient, informing each one of any emergencies, therefore allowing them to take immediate actions. The existing Glaucoma Expert System uses fuzzy logic learning algorithms applied on historical patient data to update and improve its diagnosis rules set. This process, collectively called the learning process, would benefit greatly from a web-based framework that could provide services like patient data transfer and web- based distribution of updated rules [1].

Financial Education Through Mathematics and IT Curricula: Pocket Money Management

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013

The devil is in the detail:tobacco industry political influence in the Dutch implementation of the 2001 EU Tobacco Products Directive

Introduction - The Dutch implementation of the black border provision in the 2001 European Union Tobacco Products Directive (TPD) is studied to examine the implications of tobacco industry involvement in the implementation phase of the policy process. Methods - A qualitative analysis was conducted of Dutch government documents obtained through Freedom of Information Act requests, triangulated with in-depth interviews with key informants and secondary data sources (publicly available government documents, scientific literature, and news articles). Results - Tobacco manufacturers’ associations were given the opportunity to set implementation specifications via a fast-track deal with the government. The offer of early implementation of the labelling section of the TPD was used as political leverage by the industry, and underpinned by threats of litigation and arguments highlighting the risks of additional public costs and the benefits to the government of expediency and speed. Ultimately, the government agreed to the industry's interpretation, against the advice of the European Commission. Conclusions - The findings highlight the policy risks associated with corporate actors’ ability to use interactions over technical product specifications to influence the implementation of health policy and illustrate the difficulties in limiting industry interference in accordance with Article 5.3 of the Framework Convention on Tobacco Control (FCTC). The implementation phase is particularly vulnerable to industry influence, where negotiation with industry actors may be unavoidable and the practical implications of relatively technical considerations are not always apparent to policymakers. During the implementation of the new TPD 2014/40/EU, government officials are advised to take a proactive role in stipulating technical specifications.

Cyber Threats Identification in the Evolving Digital Reality

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2016