Effect of brushing with conventional versus whitening dentifrices on surface roughness and biofilm formation of dental ceramics

The aim of this study was to evaluate the effect of conventional and whitening dentifrices on the weight loss, surface roughness, and early in situ biofilm formation on the surface of dental ceramics. Standardized feldspar ceramic specimens (Vita VM7 and Vita VM13) were submitted to the following experimental conditions: no brushing; brushing without a dentifrice; brushing with a conventional dentifrice; and brushing with a whitening dentifrice. A brushing machine was used to simulate brushing. The mass and surface roughness of all specimens from the test groups were evaluated prior to and after brushing. Ten participants used an oral device for eight hours to evaluate the biofilm formed in situ on the specimens. Scanning electron microscopy was used for qualitative and quantitative analysis of the biofilm. ANOVA and Tukey tests were used to analyze the results of weight loss, surface roughness, and presence of bacteria. A one-way Kruskal-Wallis test was used for bacterial colonization results. For both ceramics, brushing with a whitening dentifrice resulted in weight loss that was significantly greater when compared to brushing without a dentifrice or with a conventional dentifrice. Increased surface roughness was noticed on VM13 ceramic samples with both dentifrices, whereas only conventional dentifrice had a significant effect on the surface roughness of VM7 samples. For both VM7 and VM13, no difference was found between the experimental conditions with regard to the presence or number of bacteria. Cocci and short rods were the predominant microbial morphotypes. Granular or fibrillar acellular material partially covered the specimens. Brushing with a whitening dentifrice resulted in significant weight loss of ceramic restorations, while brushing with both conventional and whitening dentifrices can roughen ceramic surfaces. The increase in roughness was not clinically significant to contribute to increased biofilm formation.

Influence of convergence angle of tooth preparation on the fracture resistance of Y-TZP-based all-ceramic restorations

Objective: To investigate the influence of the convergence angle of tooth preparation on the fracture load of Y-TZP-based ceramic (YZ-Vita YZ) substructure (SB) veneered with a feldspathic porcelain (VM9-Vita VM9). Methods: Finite element stress analysis (FEA) was performed to examine the stress distribution of the system. Eighty YZ SB were fabricated using a CAD-CAM system and divided into four groups (n = 20), according to the total occlusal convergence (TOC) angle: G6-6° TOC; G12-12° TOC; G20-20° TOC; and G20MOD-20° TOC with modified SB. All SB were veneered with VM9, cemented in a fiber reinforced epoxy resin die, and loaded to failure. Half of the specimens from each group (n = 10) were cyclic fatigued (106 cycles) before testing. Failure analysis was performed to determine the fracture origin. Data were statistically analyzed using Anova and Tukey's tests (α = 0.05). Results: The greatest mean load to fracture value was found for the G20MOD, which was predicted by the FEA. Cyclic fatigue did not significantly affect the load of fracture. Catastrophic failure originating from the internal occlusal surface of the SB was the predominant failure mode, except for G20MOD. Significance: The YZ-VM9 restorations resisted greater compression load than the usual physiological occlusal load, regardless of the TOC angle of preparations. Yet, the G20MOD design produced the best performance among the experimental conditions evaluated. © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Morphological diversity of setae on the second maxilliped of fiddler crabs (Decapoda: Ocypodidae) from the southwestern Atlantic coast

Fiddler crabs are deposit feeders, and use the setae on their mouth appendages to manipulate sediment particles to extract food. The number of spoon-tipped setae on the second maxilliped is frequently related to the distribution of fiddler crabs on estuarine sediments, but no study has compared the morphological diversity of these setae among multiple fiddler crab species. Here, we describe and classify the setae of the second maxillipeds of the nine Uca spp. known from the Brazilian coast. The second maxilliped of each species was examined by scanning electron microscopy. Six types of setae (five papposerrate, and one pappose) were described on the meropodite of the second maxilliped. Among the papposerrate setae, one type had a spoon-like tip, and the morphology of this type, especially the degree of curvature, differed between species. Members of Uca leptodactylus, U. uruguayensis, and U. maracoani had highly concave spoon-tipped setae. In U. rapax and U. cumulanta, the setal tip was moderately curved, while in U. thayeri, U. burgersi, and U. mordax, this curvature was slight. At the other extreme, the meropodite of the second maxilliped of U. vocator lacked setae altogether. This is the first study that describes differences in the degree of curvature of spoon-tipped setae in fiddler crabs. This trait may be strongly related to the distribution of these fiddler crabs on different estuarine substrates. © 2012, The American Microscopical Society, Inc.

Brachyuran and anomuran crabs associated with Schizoporella unicornis (Ectoprocta, Cheilostomata) from southeastern Brazil

The main goals of this investigation were to describe the community structure of anomuran and brachyuran crabs inhabiting reefs constituted by colonies of Schizoporella unicornis, and to provide a species importance ranking for this community. Collections were carried out on S. unicornis reefs at two-month intervals from May 2003 to May 2004, in the rocky sublittoral of the southeastern Brazilian coast. Relative abundance and occurrence were used to rank these species in the hierarchy importance. A total of 2,018 individuals were obtained, in 11 families, 22 genera and 31 species. Porcellanidae and Pilumnidae were the most abundant families, comprising respectively almost 60% and 15% of individuals sampled. The species ranking indicated four main groups A, B, C and D, with group A subdivided. Subgroup A1 contained 9 species, including the species of greatest ecological importance for community regarding abundance and occurrence. The great abundance of crabs associated with S. unicornis seems to be the result of its recognized importance during the crab developmental cycle, and as shelter and food for some Decapod species. These observations reveal the importance of conserving the areas occupied by these reef colonies, which appear to be an important environment for maintaining local biodiversity.

Relative growth and reproduction in Achelous spinicarpus (Crustacea: Portunidae) on the south-eastern continental shelf of Brazil

This investigation aimed to study the relative growth, morphological sexual maturity and fecundity of the swimming crab Achelous spinicarpus in a tropical region, on the south-eastern continental shelf of Brazil (25°S). Biometry of all specimens was conducted, including measurements of the cephalothorax, cheliped, abdomen and gonopods. Relative growth was described based on the equation for allometry (y = axb), and size at sexual maturity was determined from inflections in relations involving the cheliped, gonopods (males), and abdomen (females), as dependent variables, related to the cephalothorax width (independent variable). Fecundity was estimated by the gravimetric method. The relations of the length of the chelar propodus and carpal spine to the carapace width without the lateral spines (CW) showed positive allometry in both sexes, with a significant variation in the constant 'b' for males between the developmental stages (juvenile and adult) and the size at maturity estimated at 37 mm CW. In females, the abdomen was most appropriate for the estimate of morphological maturity, which occurred at a smaller size (32 mm CW), with a change in the growth pattern between the stages, passing from isometric (juveniles) to positive allometric (adults). The gonopods also showed different growth rates between developmental stages, in synchrony with the variables of the cheliped. Mean fecundity for the species was 53,984 eggs, with a positive correlation between the number of eggs exteriorized and the size of the female; the equations allowed interconversion between these variables, due to the adjustment of the power function (r2 ≥ 86%). © 2012 Marine Biological Association of the United Kingdom.

Comparison of the population biology of Epialtus bituberculatus from two rocky shores with distinct hydrodynamic patterns

The population biology of Epialtus bituberculatus was compared between two different intertidal localities with differing levels of wave exposure. Sampling was conducted monthly between January and December, 2001 on seaweed banks of Sargassum cymosum in the intertidal zone of the rocky shores Grande (GR) (23°23′S-45°03′W) and Domingas Dias (DD) (23°29′S-45°08′W). Four hundred and twenty-eight crabs were captured at the GR site: 111 juvenile males, 106 adult males, 57 juvenile females, 17 adult females and 137 ovigerous females; while 455 specimens were obtained at the DD site: 76 juvenile males, 113 adult males, 37 juvenile females, 40 adult females and 189 ovigerous females. The population from GR showed a non-normal distribution and from DD a normal distribution. The sex-ratio (female/male) was 1:0.97 at GR (χ2 = 0.77, P = 0.084), whereas it was 1:1.41 at DD (χ2 = 13.03, P < 0.001). The largest individuals occurred at DD (U = 78249.0, P < 0.001). The estimated size at sexual maturity was 6.3 and 5.0 mm carapace width (CW) for males, and 5.4 and 5.2 mm CW for females, from GR and DD, respectively. The observed differences in E. bituberculatus between the studied localities might be explained by the different degrees of wave exposure between sites. However, other factors that might also explain the observed differences (e.g. temperature, salinity and food availability) cannot be discarded as relevant in influencing the population structure between sites herein studied. © 2012 Marine Biological Association of the United Kingdom.

Comparison of body size, relative growth and size at onset sexual maturity of Uca uruguayensis (Crustacea: Decapoda: Ocypodidae) from different latitudes in the south-western Atlantic

Some crustaceans show variations of their reproductive biology within their geographical distribution, and knowledge about such variations is important for the comprehension of their reproductive adaptations. This study compared two populations of the fiddler crab Uca uruguayensis from two locations on the south-western Atlantic coast: Ubatuba Bay, São Paulo, Brazil and Samborombón Bay, Buenos Aires, Argentina. The population features analysed were the body size variation (carapace width = CW) and the size at the onset of sexual maturity (SOM) in order to test the hypothesis that the size at SOM, should be the same in relative terms (RSOM), independently of the latitudinal position. In the Brazilian population the CW ranged from 4.18 to 11.60 mm for males and 3.90 to 9.80 mm for females, and in the Argentinean population from 3.60 to 14.10 mm for males and 2.85 to 12.00 mm for females. In the Brazilian population the SOM was 7.1 (RSOM = 0.58) and 5.9 mm CW (RSOM = 0.57) for males and females, respectively, and in the Argentinean population it was 7.0 (RSOM = 0.42) and 6.75 mm CW (RSOM = 0.53) for males and females, respectively. This fact is probably related to a great plasticity in the life history features of Uca uruguayensis under different environmental conditions. © 2012 Marine Biological Association of the United Kingdom.

Mangrove habitat partitioning by Ucides cordatus (Ucididae): Effects of the degree of tidal flooding and tree-species composition during its life cycle

Environmental factors strongly affect mangrove crabs, and some factors modulate population structure and habitat partitioning during the crabs' life cycle. However, the effect of these environmental factors on habitat selection by mangrove crabs is still unknown. We evaluated habitat selection by the mangrove crab Ucides cordatus in mangrove forests with different degrees of predominance of Rhizophora mangle, Laguncularia racemosa or Avicennia schaueriana, two tidal flooding levels (less- and more-flooded), and two biological periods (breeding and non-breeding seasons). Sampling was conducted in four mangrove forests with different influences of these biotic and abiotic parameters. We used the data for sex ratio to explain environmental partitioning by this species. Females predominated in R. mangle mangroves, independently of the biological period (breeding or non-breeding seasons), and males predominated only in the less-flooded L. racemosa mangroves. The flooding level affected the sex ratio of U. cordatus, with a predominance of males in less-flooded mangroves, independently of the biological period; and a gender balance in the more-flooded mangroves only during the breeding season. Outside the breeding season, the largest specimens were recorded in the R. mangle mangroves, but in the breeding season, the largest crabs were recorded in the L. racemosa mangroves with a higher level of flooding. These results suggest that tree-species composition and tidal flooding level can have a significant effect on the habitat partitioning of sexes and sizes of the mangrove crab U. cordatus both during and outside the breeding season. © 2012 Springer-Verlag and AWI.

Regular and switching platform: Bone stress analysis with varying implant diameter

The aim of this study was to evaluate stress distribution of the peri-implant bone by simulating the biomechanical influence of implants with different diameters of regular or platform switched connections by means of 3-dimensional finite element analysis. Five mathematical models of an implant-supported central incisor were created by varying the diameter (5.5 and 4.5 mm, internal hexagon) and abutment platform (regular and platform switched). For the cortical bone, the highest stress values (rmax and rvm) were observed in situation R1, followed by situations S1, R2, S3, and S2. For the trabecular bone, the highest stress values (rmax) were observed in situation S3, followed by situations R1, S1, R2, and S2. The influence of platform switching was more evident for cortical bone than for trabecular bone and was mainly seen in large platform diameter reduction.

Importancia de los sustratos biogénicos para el cangrejo de piedra Menippe nodifrons Stimpson, 1859 (Brachyura: Eriphioidea)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Epibiosis in decapod crustaceans by stalked barnacle Octolasmis lowei (Cirripedia: Poecilasmatidae)

Stalked barnacles Octolasmis lowei Darwin, 1851 are frequently found attached to decapod crustaceans. Their epibiotic association depends on many factors, which are mainly related to characteristics of the host's biology. This study evaluated the infestation and distribution of stalked barnacles in the branchial chambers of crabs, and analyzed the data with respect to the host's sex, maturity stage, molt cycle and size. The crab species Arenaeus cribrarius Lamarck, 1818, Callinectes danae Smith, 1869, Callinectes ornatus Ordway, 1863, Hepatus pudibundus Herbst, 1785, Libinia ferreirae Brito Capello, 1871, and Persephona punctata Linnaeus, 1758 were sampled and found to be infested by O. lowei. No juvenile crabs were infested. The prevalence of infestation by O. lowei was significantly different among C. danae, C. ornatus, and H. pudibundus males and females. All infested hosts were in the intermolt period. The mean size of infested crabs was larger than that observed for non-infested individuals. Internally, stalked barnacles were concentrated on the central gills or walls and floor of branchial chambers, suggesting that these gills provide more favorable conditions for the settlement and development of these epibionts. These results highlight the relationship between epibiont infestation and host biology, as well as the role of decapod crustaceans as a suitable substrate for the development of stalked barnacle O. lowei. © 2013 Sociedade Brasileira de Zoologia All rights reserved.

Surface agents' influence on the flexural strength of bilaminated ceramics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relative growth, sexual maturity, and breeding season of three species of the genus Persephona (Decapoda: Brachyura: Leucosiidae): A comparative study

The relative growths of Persephona lichtensteinii, P. mediterranea, and P. punctata were investigated on the south-eastern Brazilian coast, focusing on differences in the growth rates between immature and mature phases, the onset of morphological sexual maturity, and the breeding seasons of these species. Crabs were collected every two months from January 1991 through to November 1992, from a shrimp fishing boat equipped with two otter-trawl nets. Significant differences in the patterns of body growth were observed between immature and mature phases of all three species. Changes in the growth rates of the chelipeds (males) and abdomen (females) observed for P. lichtensteinii, P. mediterranea, and P. punctata, seem to be related to the puberty moult for both sexes. Males of P. mediterranea and P. punctata reached larger mean sizes of carapace width than females, whereas no difference was recorded for P. lichtensteinii. The body size at which 50% of males attained sexual maturity was also larger in P. mediterranea and P. punctata, and smaller in P. lichtensteinii. The absence of a pronounced sexual dimorphism and the size at the onset of sexual maturity observed only for P. lichtensteinii might be explained by distinct reproductive strategies of males. The presence of ovigerous females during the entire sampling period suggests that all three species have a continuous reproduction pattern at the Ubatuba region. Future studies on the population structure, functional maturity, and mating system should improve the understanding of factors driving the biology and ecology of these species at a subtropical region. © Marine Biological Association of the United Kingdom 2013.

Stress analysis in bone tissue around single implants with different diameters and veneering materials: A 3-D finite element study

The aimof this study was to evaluate the stress distribution on bone tissue with a single prosthesis supported by implants of large and conventional diameter and presenting different veneering materials using the 3-D finite elementmethod. Sixteenmodels were fabricated to reproduce a bone block with implants, using two diameters (3.75 × 10 mmand 5.00 × 10 mm), four different veneering materials (composite resin, acrylic resin, porcelain, and NiCr crown), and two loads (axial (200 N) and oblique (100 N)). For data analysis, the maximum principal stress and vonMises criterion were used. For the axial load, the cortical bone in allmodels did not exhibit significant differences, and the trabecular bone presented higher tensile stresswith reduced implant diameter. For the oblique load, the cortical bone presented a significant increase in tensile stress on the same side as the loading for smaller implant diameters. The trabecular bone showed a similar but more discreet trend. There was no difference in bone tissue with different veneering materials. The veneering material did not influence the stress distribution in the supporting tissues of single implant-supported prostheses. The large-diameter implants improved the transference of occlusal loads to bone tissue and decreased stress mainly under oblique loads.Oblique loading was more detrimental to distribution stresses than axial loading. © 2013 Elsevier B.V. All rights reserved.

Efeitos indiretos de predadores e de herbívoros florais e foliares no comportamento de visitantes florais e sucesso reprodutivo de Rubus rosifolius

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)