Antioxidant and cytoprotective activity of leaves of Peltiphyllum peltatum (Torr.) Engl.

The antioxidant potential of fresh leaves of Peltiphyllum peltatum (Torr.) Engl. (Saxfragaceae) was analysed by measuring scavenging potential against l,l'-diphenyl-2-picrylhydrazyl (DPPH center dot) and hydroxyl radicals (W), reducing power, inhibition of lipid peroxidation and protection of cultured cells from a lethal dose of hydrogen peroxide (H2O2). In all chemical assays used, the crude ethanolic extract of leaves of P. peltatum, which contained 21.8 +/- 1.7% (w/w, n = 3) of total phenols, was as effective as the standard antioxidant compound, rutin. Fractionation of the crude extract with solvent of increasing polarity (namely, petroleum ether, chloroform, ethyl acetate, butanol and water) led to identification of the active fractions (ethyl acetate and butanol fractions). The crude extract and its active fractions, but not rutin, protected cultured RAW 264.7 macrophages from a lethal dose Of H2O2.

A regional chemostratigraphically-defined correlation framework for the late Triassic TAG-I Formation in Blocks 402 and 405a, Algeria

The Triassic Argilo-Gréseux Inférieur Formation (TAG-I) is one of the principal hydrocarbon reservoirs in the Berkine Basin of Algeria. Sedimentological studies have shown that it exhibits marked spatial and temporal facies variations on both a local field scale and a regional basinal scale. This variability, combined with a lack of diagnostic flora and fauna, makes regional correlation within the unit difficult. In turn, the lack of a consistent regional stratigraphic framework hampers the comparison of the various correlation schemes devised by operators in the basin. Contrasting the TAG-I in Blocks 402 and 405a exemplifies the problems encountered when attempting regionally to define a correlation framework for the interval. Between these two blocks, a distance of approximately 200 km, there are marked changes in the style of deposition from sand-dominated, proximal fluvial systems in the SW (Block 405a, MLN, MLC, KMD and MLNW fields) to a more distal, more clay-prone system in the NE (Block 402, ROD/BRSE/BSFN, SFNE and BSF fields). A chemostratigraphic study of the TAG-I in these two blocks has allowed a four-fold correlation framework to be defined, where each chemostratigraphic package has distinctive geochemical features. Chemostratigraphic Package 10, the oldest unit, lies above the Hercynian Unconformity, but beneath a geochemically identifiable hiatal surface. Chemostratigraphic Package 20 lies above the hiatal surface but is separated from the overlying packages by a mineralogical change identifiable in both claystone and sandstone geochemistry. Chemostratigraphic Packages 30 and 40 are chemically somewhat similar, but are separated by a regional event interpreted as a period of dolocrete and lacustrine development. By combining the geochemical differentiation of the units and recognition of their stratal boundaries, it is possible to define a correlation for the TAG-I between Blocks 402 and 405a. The proposed correlation between the two blocks suggests that the northern parts of Block 405a may have been occupied by a spur or subsidiary channel from the main SW–NE-trending fluvial system, resulting in one of the chemically defined packages being demonstrably absent in the MLNW, MLN, KMD and MLC fields when compared with the other areas of the study.

Responses Of Mytilus-Edulis On Exposure To The Water-Accommodated Fraction Of North-Sea-Oil

Individuals of Mytilus edulis L., collected from the Erme estuary (S.W. England) in 1978, were exposed to low concentrations (7 to 68 μg l-1) of the water-accommodated fraction (WAF) of North Sea crude oil. The pattern of accumulation of petroleum hydrocarbons in the body tissues was affected by the presence of algal food cells, the period of exposure, the hydrocarbon concentration in seawater, the type of body tissue and the nature of the hydrocarbon. Many physiological responses (e.g. rates of oxygen consumption, feeding, excretion, and scope for growth), cellular responses (e.g. lysosomal latency and digestive cell size) and biochemical responses (e.g. specific activities of several enzymes) were significantly altered by short-term (4 wk) and/or long-term (5 mo) exposure to WAF. Stress indices such as scope for growth and lysosomal latency were negatively correlated with tissue aromatic hydrocarbons.

Measurement Of The Responses Of Individuals To Environmental-Stress And Pollution - Studies With Bivalve Mollusks

Certain physiological differences between individuals in different populations of the mussel, Mytilus edulis, are described. In particular, the scope for growth differs in space and time and may be used to assess the animals' physiological condition. When the required measurements are made in the field, the rates of growth predicted from the physiological data agree well with observed rates of growth. An alternative approach utilizes mussels transplanted to various waters, with indices of condition then measured in the laboratory under standard conditions; an example of this approach is illustrated. Laboratory experiments are used to equate various levels of physiological condition with fecundity, in an attempt to equate physiological effects on the individual with likely population damage. A cytochemical index of stress is described, based on the latency of lysosomal enzymes; spatial variability in this index, and its relation with the scope for growth, are discussed. Finally, the results of some experiments on the effects of petroleum hydrocarbons on mussels are described and the presence of inducible activity of NADPH-dependent tetrazolium reductase in the blood cells is demonstrated. Certain considerations that apply in adopting similar measurements of biological effects of pollution in environmental monitoring programmes are discussed.

Biomonitoring of air pollutants by using lichens (Evernia prunastri) in areas between Kenitra and Mohammedia cities in Morocco.

In this study, Evernia prunastri, a lichen growing in its natural habitat in Morocco was analysed for the concentration of five heavy metals (Fe, Pb, Zn, Cu and Cr) from eleven sites between Kenitra and Mohammedia cities. The control site was Dar Essalam, an isolated area with low traffic density and dense vegetation. In the investigated areas, the concentration of heavy metals was correlated with vehicular traffic, industrial activity and urbanization. The total metal concentration was highest in Sidi Yahya, followed by Mohammedia and Bouznika. The coefficient of variation was higher for Pb and lower for Cu, Zn and Fe. The concentrations of most heavy metals in the thalli differed significantly between sites (p<0.01). Principal component analysis (PCA) revealed a significant correlation between heavy metal accumulation and atmospheric purity index. This study demonstrated also that the factors most strongly affecting the lichen flora were traffic density, the petroleum industry and paper factories in these areas. Overall, these results suggest that the index of atmospheric purity and assessment of heavy metals in lichen thalli are good indicators of the air quality at the studied sites.

Polycyclic aromatic hydrocarbons (PAHS) (I): Toxicity, population exposure and involved foods

Food is one of the main exogenous sources of genotoxic compounds. In heated food products, polycyclic aromatic hydrocarbons (PAHs) represent a priority group of genotoxic, mutagenic and/or carcinogenic chemical pollutants with adverse long-term health effects. People can be exposed to these compounds through different environments and via various routes: inhalation, ingestion of foods and water and even percutaneously. The presence of these compounds in food may be due to environmental contamination, to industrial handling and processing of foods and to oil processing and refining. The highest levels of these compounds are found in smoked foods, in seafood which is found in polluted waters, in grilled meats and, to a lesser extent, in vegetable fats and oils. Lower levels of PAHs are found in vegetables and in cereals and its products.

The Effects of Several Paper Characteristics and Application Methods on the Sublimation Rate of Cyclododecane

Cyclododecane (CDD) is a waxy, solid cyclic hydrocarbon (C12H24) that sublimes at room temperature and possesses strong hydrophobicity. In paper conservation CDD is used principally as a temporary fixative of water-soluble media during aqueous treatments. Hydrophobicity, ease of reversibility, low toxicity, and absence of residues are reasons often cited for its use over alternative materials although the latter two claims continue to be debated in the literature. The sublimation rate has important implications for treatment planning as well as health and safety considerations given the dearth of reliable information on its toxicity and exposure limits. This study examined how the rate of sublimation is affected by fiber type, sizing, and surface finish as well as delivery in the molten phase and as a saturated solution in low boiling petroleum ether. The effect of warming the paper prior to application was also evaluated. Sublimation was monitored using gravimetric analysis after which samples were tested for residues with gas chromatography-flame ionization detection (GC-FID) to confirm complete sublimation. Water absorbency tests were conducted to determine whether this property is fully reestablished. Results suggested that the sublimation rate of CDD is affected minimally by all of the paper characteristics and application methods examined in this study. The main factors influencing the rate appear to be the thickness and mass of the CDD over a given surface area as well as temperature and ventilation. The GC-FID results showed that most of the CDD sublimed within several days of its disappearance from the paper surface regardless of the application method. Minimal changes occurred in the water absorbency of the samples following complete sublimation.

The Cost of Sustainability Capital and the Creation of Sustainable Value by Companies

We develop and apply a valuation methodology to calculate the cost of sustainability capital, and, eventually, sustainable value creation of companies. Sustainable development posits that decisions must take into account all forms of capital rather than just economic capital. We develop a methodology that allows calculation of the costs that are associated with the use of different forms of capital. Our methodology borrows the idea from financial economics that the return on capital has to cover the cost of capital. Capital costs are determined as opportunity costs, that is, the forgone returns that would have been created by alternative investments. We apply and extend the logic of opportunity costs to the valuation not only of economic capital but also of other forms of capital. This allows (a) integrated analysis of use of different forms of capital based on a value-based aggregation of different forms of capital, (b) determination of the opportunity cost of a bundle of different forms of capital used in a company, called cost of sustainability capital, (c) calculation of sustainability efficiency of companies, and (d) calculation of sustainable value creation, that is, the value above the cost of sustainability capital. By expanding the well-established logic of the valuation of economic capital in financial markets to cover other forms of capital, we provide a methodology that allows determination of the most efficient allocation of sustainability capital for sustainable value creation in companies. We demonstrate the practicability of the methodology by the valuation of the sustainability performance of British Petroleum (BP).

Environmental, lifestyle, and familial/ethnic factors associated with myeloproliferative neoplasms

Myeloproliferative neoplasms (MPNs) are characterized by overproduction of mature functional blood cells and are often associated with an acquired genetic mutation of Janus Kinase 2V617F. The etiology of MPNs remains unknown. The aim of this article was to review and collate all known published data investigating environmental and lifestyle factors associated with MPNs. Medline, Embase, PubMed, Cochrane, and Web of Science were systematically searched using terms for MPNs and observational study designs to identify studies investigating the risk factors for MPNs published before March 2010. Of 9,156 articles identified, 19 met the selection criteria. Although the studies exhibited heterogeneity, in case definitions, study design, and risk factors investigated, several themes emerged. A strong association was found with Jewish descent, and with a family history of MPNs. Autoimmune conditions, specifically Crohn's disease, were more common in patients with MPNs. Certain occupational groups were significantly associated with MPNs including occupations with potential exposure to benzene and/or petroleum. Blood donation was associated with an increased risk of polycythemia vera specifically. The vast heterogeneity in studies identified as part of this review suggests that large scale systematic assessment of etiological factors associated with MPNs is warranted. (C) 2011 Wiley-Liss, Inc.

Numerical simulation of a patent technology for sealing of deep-sea oil wells using nonlinear finite element method

For over 50 years bridge plugs and cement have been used for well abandonment and work over and are still the material of choice. However the failures of cement abandonments using bridge plugs has been reported on many occasions, some of which have resulted in fatal consequences. A new patented product is designed to address the shortcomings associated with using bridge plugs and cement. The new developed tools use an alloy based on bismuth that is melted in situ using Thermite reaction. The tool uses the expansion properties of bismuth to seal the well. Testing the new technology in real field under more than 2 km deep sea water can be expensive. Virtual simulation of the new device under simulated thermal and mechanical environment can be achieved using nonlinear finite element method to validate the product and reduce cost. Experimental testing in the lab is performed to measure heat generated due to thermite reaction. Then, a sequential thermal mechanical explicit/implicit finite element solver is used to simulate the device under both testing lab and deep water conditions.