Diagnosis and management of enophthalmos

Enophthalmos is a relatively frequent and misdiagnosed clinical sign in orbital diseases. The knowledge of the different etiologies of enophthalmos and its adequate management are important, because in some cases, it could be the first sign revealing a life-threatening disease. This article provides a comprehensive review of the pathophysiology, evaluation, and management of enophthalmos. The main etiologies, such as trauma, chronic maxillary atelectasis (silent sinus syndrome), breast cancer metastasis, and orbital varix, will be discussed. Its objective is to enable the reader to recognize, assess, and treat the spectrum of disorders causing enophthalmos.

[Childhood Henoch-Schönlein syndrome--common and uncommon features, complications, Finkelstein-Seidlmayer variant and management]

Although Henoch-Schönlein syndrome can occur at any age, it is overwhelmingly a disease of childhood. Indeed, Henoch-Schönlein syndrome is the most common vasculitis that affects children. The clinical features of this vasculitis are well documented, and the diagnosis is generally not difficult. This article briefly reviews both common and uncommon clinical aspects of the condition and information concerning therapy. A further focus of this review is recent information concerning abnormalities of immunoglobulin IgA1 glycosylation and the role of aberrantly glycosylated immunoglobulins in the development of Henoch-Schönlein syndrome. The final focus of the article is acute hemorrhagic edema, a benign vasculitis limited to the skin, which is characterized by circinate, medallion-like purpura, and ecchymoses and occurs in children younger than 4 years of age. The nosologic position of acute hemorrhagic edema, which has also been called Finkelstein-Seidlmayer syndrome, as a variant of Henoch-Schönlein syndrome is the subject of considerable debate, but most authors agree that there are sufficient clinical and prognostic differences to consider it a separate entity.

Performance evaluation and characterization of symmetric capacitors with carbon black, and asymmetric capacitors using a carbon foam supported nickel electrode

This thesis evaluates a novel asymmetric capacitor incorporating a carbon foam supported nickel hydroxide positive electrode and a carbon black negative electrode. A series of symmetric capacitors were prepared to characterize the carbon black (CB) negative electrode. The influence of the binder, PTFE, content on the cell properties was evaluated. X-ray diffraction characterization of the nickel electrode during cycling is also presented. The 3 wt% and 5 wt% PTFE/CB symmetric cells were examined using cyclic voltammetry (CV) and constant current charge/discharge measurements. As compared with symmetric cells containing more PTFE, the 3 wt% cell has the highest average specific capacitance, energy density and power density over 300 cycles, 121.8 F/g, 6.44 Wh/kg, and 604.1 W/kg, respectively. Over the 3 to 10 wt% PTFE/CB range, the 3 wt% sample exhibited the lowest effective resistance and the highest BET surface area. Three asymmetric cells (3 wt% PTFE/CB negative electrode and a nickel positive) were fabricated; cycle life was examined at 3 current densities. The highest average energy and power densities over 1000 cycles were 20 Wh/kg (21 mA/cm2) and 715 W/kg (31 mA/cm2), respectively. The longest cycle life was 11,505 cycles (at 8 mA/cm2), with an average efficiency of 79% and an average energy density of 14 Wh/kg. The XRD results demonstrate that the cathodically deposited nickel electrode is a typical α-Ni(OH)2 with the R3m structure (ABBCCA stacking); the charged electrodes are 3γ-NiOOH with the same stacking as the α-type; the discharged electrodes (including as-formed electrode) are aged to β’-Ni(OH)2 (a disordered β) with the P3m structure (ABAB stacking). A 3γ remnant was observed.

Performance characteristics and design recommendations for biomass-burning stoves using earthen construction materials

This report provides an analysis of the thermal performance and emissions characteristics of improved biomass stoves constructed using earthen materials. Commonly referred to as mud stoves, this type of improved stove incorporates high clay content soil with an organic binder in the construction of its combustion chamber and body. When large quantities of the mud material are used to construct the stove body, the stove does not offer significant improvements in fuel economy or air quality relative to traditional open fire cooking. This is partly because a significant amount of heat is absorbed by the mass of the stove reducing combustion efficiency and heat transfer to the cook pot. An analysis of the thermal and mechanical properties of stove materials was also performed. A material mixture containing a one‐to‐one ratio by volume of high content clay soil and straw was found to have thermal properties comparable to fired ceramics used in more advanced improved stove designs. Feedback from mud stove users in Mauritania and Mali, West Africa was also collected during implementation. Suggestions for stove design improvements were developed based on this information and the data collected in the performance, emissions, and material properties analysis. Design suggestions include reducing stove height to accommodate user cooking preferences and limiting overall stove mass to reduce heat loss to the stove body.

Information integration and management through the design and construction phases of a project life cycle

Information management is a key aspect of successful construction projects. Having inaccurate measurements and conflicting data can lead to costly mistakes, and vague quantities can ruin estimates and schedules. Building information modeling (BIM) augments a 3D model with a wide variety of information, which reduces many sources of error and can detect conflicts before they occur. Because new technology is often more complex, it can be difficult to effectively integrate it with existing business practices. In this paper, we will answer two questions: How can BIM add value to construction projects? and What lessons can be learned from other companies that use BIM or other similar technology? Previous research focused on the technology as if it were simply a tool, observing problems that occurred while integrating new technology into existing practices. Our research instead looks at the flow of information through a company and its network, seeing all the actors as part of an ecosystem. Building upon this idea, we proposed the metaphor of an information supply chain to illustrate how BIM can add value to a construction project. This paper then concludes with two case studies. The first case study illustrates a failure in the flow of information that could have prevented by using BIM. The second case study profiles a leading design firm that has used BIM products for many years and shows the real benefits of using this program.

Perceptions of water conditions and management in the Sonora River Basin, Sonora, Mexico

The effects of climate change are expected to be very severe in arid regions. The Sonora River Basin, in the northwestern state of Sonora, Mexico, is likely to be severely affected. Some of the anticipated effects include precipitation variability, intense storm events, higher overall temperatures, and less available water. In addition, population in Sonora, specifically the capital city of Hermosillo, is increasing at a 1.5% rate and current populations are near 700,000. With the reduction in water availability and an increase in population, Sonora, Mexico is expected to experience severe water resource issues in the near future. In anticipation of these changes, research is being conducted in an attempt to improve water management in the Sonora River Basin, located in the northwestern part of Sonora. This research involves participatory modeling techniques designed to increase water manager awareness of hydrological models and their use as integrative tools for water resource management. This study was conducted as preliminary research for the participatory modeling grant in order to gather useful information on the population being studied. This thesis presents research from thirty-four in-depth interviews with water managers, citizens, and agricultural producers in Sonora, Mexico. Data was collected on perceptions of water quantity and quality in the basin, thoughts on current water management practices, perceptions of climate change and its management, experience with, knowledge of, and trust in hydrological models as water management tools. Results showed that the majority of interviewees thought there was not enough water to satisfy their daily needs. Most respondents also agreed that the water available was of good quality, but that current management of water resources was ineffective. Nearly all interviewees were aware of climate change and thought it to be anthropogenic. May reported experiencing higher temperatures, precipitation changes, and higher water scarcity and attributed those fluctuations to climate change. 65% of interviewees were at least somewhat familiar with hydrological models, though only 28% had ever used them or their output. Even with model usage results being low, 100% of respondents believed hydrological models to be very useful water management tools. Understanding how water, climate change, and hydrological models are perceived by this population of people is essential to improving their water management practices in the face of climate change.

In-situ measurement and characterization of cloud particles using digital in-line holography

Satellite measurement validations, climate models, atmospheric radiative transfer models and cloud models, all depend on accurate measurements of cloud particle size distributions, number densities, spatial distributions, and other parameters relevant to cloud microphysical processes. And many airborne instruments designed to measure size distributions and concentrations of cloud particles have large uncertainties in measuring number densities and size distributions of small ice crystals. HOLODEC (Holographic Detector for Clouds) is a new instrument that does not have many of these uncertainties and makes possible measurements that other probes have never made. The advantages of HOLODEC are inherent to the holographic method. In this dissertation, I describe HOLODEC, its in-situ measurements of cloud particles, and the results of its test flights. I present a hologram reconstruction algorithm that has a sample spacing that does not vary with reconstruction distance. This reconstruction algorithm accurately reconstructs the field to all distances inside a typical holographic measurement volume as proven by comparison with analytical solutions to the Huygens-Fresnel diffraction integral. It is fast to compute, and has diffraction limited resolution. Further, described herein is an algorithm that can find the position along the optical axis of small particles as well as large complex-shaped particles. I explain an implementation of these algorithms that is an efficient, robust, automated program that allows us to process holograms on a computer cluster in a reasonable time. I show size distributions and number densities of cloud particles, and show that they are within the uncertainty of independent measurements made with another measurement method. The feasibility of another cloud particle instrument that has advantages over new standard instruments is proven. These advantages include a unique ability to detect shattered particles using three-dimensional positions, and a sample volume size that does not vary with particle size or airspeed. It also is able to yield two-dimensional particle profiles using the same measurements.

[Cross-talk between heart and kidney--mechanisms and management of the cardiorenal syndrome from a nephrologists view]

Renal dysfunction represents a frequent comorbidity in patients with in chronic heart failure and is not only a strong predictor of mortality, but also causally linked to the development and progression of CHF. Mechanisms involved in the cross-talk between the kidney and the heart include the up-regulated sympathetic nerve system, activation of the renin-angiotensin-aldosterone system, vasopressin release and decreased activity of arterial baroreceptors and natriuretic peptides resulting in abnormal salt and water retention. The main therapeutic goals for patients with the so-called cardiorenal syndrome is the normalization of volume status while avoiding overdiuresis and renal dysfunction as well as the implementation of an evidence-based pharmacologic treatment to improve patient outcome. If these two goals are not achieved with conventional therapy, renal replacement therapy should be discussed in an interdisciplinary approach. All current renal replacement techniques have proved to be useful in controlling hypervolemia and ameliorating functional cardiac parameters and quality of life in patients with heart failure. Nevertheless, the influence of renal replacement therapy on long-term survival of affected patients has not been addressed in large controlled studies.

[New insights into diagnosis and management of gestational diabetes mellitus: recommendations of the Swiss Society for Endocrinology and Diabetes]

Physiology and current knowledge about gestational diabetes which led to the adoption of new diagnostic criterias and blood glucose target levels during pregnancy by the Swiss Society for Endocrinology and Diabetes are reviewed. The 6th International Workshop Conference on Gestational Diabetes mellitus in Pasedena (2008) defined new diagnostic criteria based on the results of the HAPO-Trial. These criteria were during the ADA congress in New Orleans in 2009 presented. According to the new criteria there is no need for screening, but all pregnant women have to be tested with a 75 g oral glucose tolerance test between the 24th and 28th week of pregnancy. The new diagnostic values are very similar to the ones previously adopted by the ADA with the exception that only one out of three values has to be elevated in order to make the diagnosis of gestational diabetes. Due to this important difference it is very likely that gestational diabetes will be diagnosed more frequently in the future. The diagnostic criteria are: Fasting plasma glucose > or = 5.1 mmol/l, 1-hour value > or = 10.0 mmol/l or 2-hour value > or = 8.5 mmol/l. Based on current knowledge and randomized trials it is much more difficult to define glucose target levels during pregnancy. This difficulty has led to many different recommendations issued by diabetes societies. The Swiss Society of Endocrinology and Diabetes follows the arguments of the International Diabetes Federation (IDF) that self-blood glucose monitoring itself lacks precision and that there are very few randomized trials. Therefore, the target levels have to be easy to remember and might be slightly different in mmol/l or mg/dl. The Swiss Society for Endocrinology and Diabetes adopts the tentative target values of the IDF with fasting plasma glucose values < 5.3 mM and 1- and 2-hour postprandial (after the end of the meal) values of < 8.0 and 7.0 mmol/l, respectively. The last part of these recommendations deals with the therapeutic options during pregnancy (nutrition, physical exercise and pharmaceutical treatment). If despite lifestyle changes the target values are not met, approximately 25 % of patients have to be treated pharmaceutically. Insulin therapy is still the preferred treatment option, but metformin (and as an exception glibenclamide) can be used, if there are major hurdles for the initiation of insulin therapy.