Modelagem da área foliar de duas cultivares de amendoim em função das dimensões lineares dos folíolos

The purpose of this study was to determine a shape factor to estimate area of leaflets of two peanut cultivars (IAC TATU ST, IAC RUNNER 886). Correlation studies were conducted involving real leaf area (Sf) and leaf length (C), maximum leaf width (L) and the product between C and L. For each cultivar was determined a form factor (f) by means of regression analysis between the product of the length by the width and the actual area of leaves and the correlation between leaf area estimated by the correction factor and direct measurement. All evaluated models (linear, exponential or geometric) provided good estimates of leaf area (above 87%). Linear models had the best fit, passing or not through the origin. From a practical viewpoint, it is suggested to use the linear model involving the C and L product, using a linear coefficient equal to zero, with values of factor f equal to 0.7111 and 0.7266 for IAC RUNNER 886 and IAC TATU ST, respectively. The method of dimensions is feasible for the estimation of leaf area for both peanut cultivars, for showing good r(2) values (0.97), with errors below 3%, even when used with independent data.

Studies of Author Cocitation Analysis: A Bibliometric Approach for Domain Analysis

Author Cocitation Analysis (ACA) can be defined as the analysis of a group of actors, writers or researchers structurally organized in a (social and cognitive) network of a particular scientific community. The greater the number of researchers selected, the greater the amplitude and the domain boundary under consideration; the more restricted the number of researchers chosen as representative and appropriate, the less extensive the domain. From the perspective of the first axis of Tennis (2003), the selection of authors involves setting parameters on the extent of the domain, i.e., its total scope and amplitude. Thus, from the point of view of Tennis’s (2003) approach to Domain Analysis, the selection of authors for Author Cocitation Analysis is associated with the designations and boundaries of the domain, as well as to their goals (Tennis, 2003). Still, the selection of authors through the most cited authors in the literature, reflects the core elements of a domain and constitute the most specific foundation of a domain, aligning to the Degrees of Specialization characterized by Tennis (2003). It is concluded that the Author Cocitation Analysis (ACA) is a relevant procedure to the analysis of the underlying structure of a scientific knowledge domain, which meets the theories and concepts of Domain Analysis researchers, in that it allows characterizing the science, identifying, analyzing and assessing the conditions under which scientific knowledge is constructed and socialized.

Associação genética entre o perfil de ácidos graxos e outras características da carcaça e carne de bovinos da raça Nelore

Pós-graduação em Genética e Melhoramento Animal - FCAV

Histometric analysis and topographic characterization of cp Ti implants with surfaces modified by laser with and without silica deposition

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nonlinear formulation based on FEM, Mazars damage criterion and Fick's law applied to failure assessment of reinforced concrete structures subjected to chloride ingress and reinforcements corrosion

Structural durability is an important design criterion, which must be assessed for every type of structure. In this regard, especial attention must be addressed to the durability of reinforced concrete (RC) structures. When RC structures are located in aggressive environments, its durability is strongly reduced by physical/chemical/mechanical processes that trigger the corrosion of reinforcements. Among these processes, the diffusion of chlorides is recognized as one of major responsible of corrosion phenomenon start. To accurate modelling the corrosion of reinforcements and to assess the durability of RC structures, a mechanical model that accounts realistically for both concrete and steel mechanical behaviour must be considered. In this context, this study presents a numerical nonlinear formulation based on the finite element method applied to structural analysis of RC structures subjected to chloride penetration and reinforcements corrosion. The physical nonlinearity of concrete is described by Mazars damage model whereas for reinforcements elastoplastic criteria are adopted. The steel loss along time due to corrosion is modelled using an empirical approach presented in literature and the chloride concentration growth along structural cover is represented by Fick's law. The proposed model is applied to analysis of bended structures. The results obtained by the proposed numerical approach are compared to responses available in literature in order to illustrate the evolution of structural resistant load after corrosion start. (C) 2014 Elsevier Ltd. All rights reserved.

Implementation of an F-statistic all-sky search for continuous gravitational waves in Virgo VSR1 data

We present an implementation of the F-statistic to carry out the first search in data from the Virgo laser interferometric gravitational wave detector for periodic gravitational waves from a priori unknown, isolated rotating neutron stars. We searched a frequency f(0) range from 100 Hz to 1 kHz and the frequency dependent spindown f(1) range from -1.6(f(0)/100 Hz) x 10(-9) Hz s(-1) to zero. A large part of this frequency-spindown space was unexplored by any of the all-sky searches published so far. Our method consisted of a coherent search over two-day periods using the F-statistic, followed by a search for coincidences among the candidates from the two-day segments. We have introduced a number of novel techniques and algorithms that allow the use of the fast Fourier transform (FFT) algorithm in the coherent part of the search resulting in a fifty-fold speed-up in computation of the F-statistic with respect to the algorithm used in the other pipelines. No significant gravitational wave signal was found. The sensitivity of the search was estimated by injecting signals into the data. In the most sensitive parts of the detector band more than 90% of signals would have been detected with dimensionless gravitational-wave amplitude greater than 5 x 10(-24).

Efeito da quantidade do recurso na determinação do tamanho corporal, da biomassa, da abundância e da diversidade de bruquídeos e seus parasitóides

In the present study it was investigated, in plant and population scale, the relationship between the amount of resource and body size, species diversity and abundance and biomass of bruchids and their parasitoids. Possible effects of resource quality (soil quality and concentration of tannins in seeds) in response to the variables mentioned above were also analyzed. Mimosa bimucronata fruits were collected in two areas during the occurrence of bruchids during the years 2009 and 2010. Only the species of bruchid Acanthoscelides schrankiae was found infesting the fruits of M. bimucronata. The parasitoids belong to families Braconidae, Encyrtidae, Eulophidae, Eupelmidae, Eurytomidae and Pteromalidae. Most local-level analysis showed no significant results for both years of collection and study areas. There was only significant result for the relationship between the biomass of parasitoids and the concentration of tannins considering the year 2009 (negative trend). The soil from Lageado showed higher percentages of silt and clay. With respect to chemical analysis, pH, cation exchange capacity, and concentrations of organic matter, potassium, calcium and magnesium were all significantly higher in soil from Lageado. Therefore, it was found that the plants from Lageado are growing in more fertile soils. However, it was found that the amount of fruits and seeds was significantly higher in Rubião. Comparisons of the abundance of bruchids and parasitoids diversity among the areas that showed the highest values were observed in Rubião. In this study it was found that the abundance of bruchids and parasitoids, as well as the diversity of parasitoids was greatest in the area that had higher amounts of fruits and seeds, suggesting a significant relationship between the amount of resources and the abundance and diversity. However, it is possible that ...(Complete abstract click electronic access below)

Close Enough to One Another and Far Apart as Well´: The Intersection of Literature and History in Seamus Deane´s Reading in the Dark

This article analyses the intersection of narrative and history in Seamus Deane’s Reading in the Dark (1996). It uses the Benjaminian notions of memory, narration and experience to investigate how this novel creates a self through a language characterized by the absence of what it refers to. The analysis will eventually demonstrate that the tension between recollection and obliteration makes Literature and History converge as products of a narrative act.

Perfil do gestor municipal da saúde e a percepção da Estratégia Saúde da Família-DRS IX-Marília-SP

Pós-graduação em Saúde Coletiva - FMB

Envelhecimento ativo: um desafio para a equipe multidisciplinar e para as pessoas idosas frequentadoras da Unidade de Atenção ao Idoso (UAI), no município de Uberaba - MG

Pós-graduação em Serviço Social - FCHS

Viabilidade do Código MCNPX para o Estudo da Técnica de Fluorescência de Raios-X por Reflexão Total

The X-ray fluorescence analysis (XRF) is an important technique for the qualitative and quantitative determination of chemical components in a sample. It is based on measurement of the intensity of the emitted characteristic radiation by the elements of the sample, after being properly excited. One of the modalities of this technique is the total reflection x-ray fluorescence (TXRF). In TXRF, the angle of refraction of the incident beam tends to zero and the refracted beam is tangent to the sample-support interface. Thus, there is a minimum angle of incidence that there is no refracted beam and all the incident radiation undergoes total reflection. As it is implemented in very small samples, in a film format, self-absorption effects should not very relevant. In this study, we evaluated the feasibility of using code MCNPX (Monte Carlo N - Particle eXtended), to simulate a measure implemented by the TXRF technique. In this way, it was verified the quality of response of a system by TXRF spectroscopy using synchrotron radiation as excitation beam for a simple setup, by retrieving the characteristic energies and the concentrations of the elements in the sample. The steps of data processing, after obtaining the excitation spectra, were the same as in a real experiment and included the obtaining of the sensitivity curve for the simulated system. The agreement between the theoretical and simulated values of Ka characteristic energies for different elements was lower than 1 % .The obtained concentration of the elements of the sample had high relatively errors ( between 6 and 60 % ) due mainly to lack of knowing about some realistic physical parameters of the sample , such as density . In this way, this result does not preclude the use of MCNPX code for this type of application

A construção do projeto político-pedagógico das escolas do campo do município de Araraquara

This study aimed to analyze the process of developing and implementing a politicalpedagogical project for rural schools in the city of Araraquara, focusing on one of the schools served. This is an ethnographic qualitative study. The instruments of data collection were participant observation, semi-structured interviews and documentary analysis. It was observed are a change in the community organization throughout the process, with regard to a more active attitude on the part of its members, who have pursued other means to claim the fulfillment of their demands by the Government and relevant institutions, which points to the pedagogical character of participation in the movement to fight for the education they desire. It was also noticed a process of re-signification by the subjects, of their own community identity while seated in an agrarian reform project, as well as a more effective participation of those in everyday life and school organization. It was also observed changes in indicators of school, with an increase in the achievement of students as well as reducing the dropout rate to zero, and the reduction of absenteeism of teachers.

Air abrasion before and/or after zirconia sintering: surface characterization, flexural strength, and resin cement bond strength

The purpose of this in vitro study was to evaluate the effect of air-abrasion/zirconia sintering order on the yttria partially stabilized tetragonal zirconia polycrystal (Y-TZP) surface characterization (roughness, morphology, and phase transformation), flexural strength (FS), and shear bond strength (SBS) to a resin cement. Y-TZP specimens were air abraded with 50-μm Al2O3 particles after (AS), before (BS), or before and after zirconia sintering (BAS). For roughness (Ra), 30 block specimens (12×12×3.0 mm; n=10) had their surfaces analyzed by a profilometer. Next, on the air-abraded surfaces of these specimens, composite resin discs (n=30) were bonded with RelyX ARC. The bonded specimens were stored for 24 hours in distilled water at 37°C before shear testing. Failure mode was determined with a stereomicroscope (20×). The surface morphology (n=2) was evaluated by SEM (500×). For the four-point flexural strength test (EMIC DL2000), 39 bar-shaped specimens (20×4.0×1.2 mm; n=13) were air abraded according to the three conditions proposed, and an additional group (nonabraded) was evaluated (n=13). The quantitative analysis of phase transformation (n=1) was completed with Rietveld refinement with X-ray diffraction data. Ra (μm) and SBS (MPa) data were analyzed by one-way analysis of variance (ANOVA) and the Tukey test (α=0.05). Pearson correlation analysis was used to determine if there was a correlation between roughness and SBS. For FS (MPa) data, one-way ANOVA and the Dunnett C-test (α=0.05) were used. The air-abrasion/zirconia sintering order influenced significantly (p<0.001) Ra, SBS, and FS. The BS and AS groups presented the highest (1.3 μm) and the lowest (0.7 μm) Ra. The highest SBS (7.0 MPa) was exhibited by the BAS group, followed by the AS group (5.4 MPa) and finally by the BS group (2.6 MPa). All groups presented 100% adhesive failure. A weak correlation (r=−0.45, p<0.05) was found between roughness and SBS. The air-abrasion/zirconia sintering order provided differences in the surface morphology. The nonabraded (926.8 MPa) and BS (816.3 MPa) groups exhibited statistically similar FS values but lower values than the AS (1249.1 MPa) and BAS (1181.4 MPa) groups, with no significant difference between them. The nonabraded, AS, BS, and BAS groups exhibited, respectively, percentages of monoclinic phase of 0.0 wt%, 12.2 wt%, 0.0 wt%, and 8.6 wt%. The rougher surface provided by the air-abrasion before zirconia sintering may have impaired the bonding with the resin cement. The morphological patterns were consistent with the surface roughness. Considering the short-term SBS and FS, the BAS group exhibited the best performance. Air abrasion, regardless of its performance order, provides tetragonal to monoclinic transformation, while sintering tends to zero the monoclinic phase content.

Effectiveness of several solutions to prevent the formation of precipitate due to the interaction between sodium hypochlorite and chlorhexidine and its effect on bond strength of an epoxy-based sealer

To evaluate the effectiveness of isopropyl alcohol, saline or distilled water to prevent the precipitate formed between sodium hypochlorite (NaOCl) and chlorhexidine (CHX) and its effect on the bond strength of an epoxy-based sealer in radicular dentine. Methodology The root canals of 50 extracted human canines (n = 10) were instrumented. In G1, root canals were irrigated with 17% EDTA and 2.5% NaOCl; G2, as G1, except that 2% CHX was used as the final irrigant. In the other groups, intermediate flushes with isopropyl alcohol (G3), saline (G4) or distilled water (G5) were used between NaOCl and CHX. The specimens were submitted to SEM analysis to evaluate the presence of debris and smear layer, in the apical and cervical segments. In sequence, fifty extracted human canines were distributed into five groups (n = 10), similar to the SEM study. After root filling, the roots were sectioned transversally to obtain dentine slices, in the cervical, middle and apical thirds. The root filling was submitted to a push-out bond strength test using an electromechanical testing machine. Statistical analysis was performed using Kruskal–Wallis and Dunn's tests (α = 5%). Results All groups had similar amounts of residue precipitated on the canal walls (P > 0.05). The push-out bond strength values were similar for all groups, independently of the root third evaluated (P > 0.05). Conclusions Isopropyl alcohol, saline and distilled water failed to prevent the precipitation of residues on canal walls following the use of NaOCl and CHX. The residues did not interfere with the push-out bond strength of the root filling.

Response of human pulps to different in-office bleaching techniques: preliminary findings

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)