Robust fault-tolerant leader-follower control of four-wheel-steering mobile robots using terminal sliding mode

This paper addresses the actuator failure compensation problem of non-linear fourwheel-steering mobile robots based on vehicle kinematics, undergoing both known and unknown failures causing degenerated steering performance or wheels stuck at some observable angles. Terminal sliding mode control technique is used to guarantee the tracking stability infinite time with the presence of actuator fault. Simulation results are given to illustrate the effectiveness of the proposed control scheme. © Institution of Engineers Australia 2012.

Rapid multi sample DNA amplification using rotary-linear polymerase chain reaction device (PCRDisc)

Multiple sample DNA amplification was done by using a novel rotary-linear motion polymerase chain reaction (PCR) device. A simple compact disc was used to create the stationary sample chambers which are individually temperature controlled. The PCR was performed by shuttling the samples to different temperature zones by using a combined rotary-linear movement of the disc. The device was successfully used to amplify up to 12 samples in less than 30 min with a sample volume of 5 μl. A simple spring loaded heater mechanism was introduced to enable good thermal contact between the samples and the heaters. Each of the heater temperatures are controlled by using a simple proportional–integral–derivative pulse width modulation control system. The results show a good improvement in the amplification rate and duration of the samples. The reagent volume used was reduced to nearly 25% of that used in conventional method.

Design of H∞ control of neural networks with time-varying delays

This paper deals with the H∞ control problem of neural networks with time-varying delays. The system under consideration is subject to time-varying delays and various activation functions. Based on constructing some suitable Lyapunov-Krasovskii functionals, we establish new sufficient conditions for H∞ control for two cases of time-varying delays: (1) the delays are differentiable and have an upper bound of the delay-derivatives and (2) the delays are bounded but not necessary to be differentiable. The derived conditions are formulated in terms of linear matrix inequalities, which allow simultaneous computation of two bounds that characterize the exponential stability rate of the solution. Numerical examples are given to illustrate the effectiveness of our results.

Observer-based control for time-varying delay neural networks with nonlinear observation

This paper studies the problem of designing observer-based controllers for a class of delayed neural networks with nonlinear observation. The system under consideration is subject to nonlinear observation and an interval time-varying delay. The nonlinear observation output is any nonlinear Lipschitzian function and the time-varying delay is not required to be differentiable nor its lower bound be zero. By constructing a set of appropriate Lyapunov-Krasovskii functionals and utilizing the Newton-Leibniz formula, some delay-dependent stabilizability conditions which are expressed in terms of Linear Matrix Inequalities (LMIs) are derived. The derived conditions allow simultaneous computation of two bounds that characterize the exponential stability rate of the closed-loop system. The unknown observer gain and the state feedback observer-based controller are directly obtained upon the feasibility of the derived LMIs stabilizability conditions. A simulation example is presented to verify the effectiveness of the proposed result.

An illumination invariant face recognition system for access control using video

Illumination and pose invariance are the most challenging aspects of face recognition. In this paper we describe a fully automatic face recognition system that uses video information to achieve illumination and pose robustness. In the proposed method, highly nonlinear manifolds of face motion are approximated using three Gaussian pose clusters. Pose robustness is achieved by comparing the corresponding pose clusters and probabilistically combining the results to derive a measure of similarity between two manifolds. Illumination is normalized on a per-pose basis. Region-based gamma intensity correction is used to correct for coarse illumination changes, while further refinement is achieved by combining a learnt linear manifold of illumination variation with constraints on face pattern distribution, derived from video. Comparative experimental evaluation is presented and the proposed method is shown to greatly outperform state-of-the-art algorithms. Consistent recognition rates of 94-100% are achieved across dramatic changes in illumination.

Predicting avian distributions to evaluate spatiotemporal overlap with locust control operations in eastern Australia.

Locusts and grasshoppers cause considerable economic damage to agriculture worldwide. The Australian Plague Locust Commission uses multiple pesticides to control locusts in eastern Australia. Avian exposure to agricultural pesticides is of conservation concern, especially in the case of rare and threatened species. The aim of this study was to evaluate the probability of pesticide exposure of native avian species during operational locust control based on knowledge of species occurrence in areas and times of application. Using presence-absence data provided by the Birds Australia Atlas for 1998 to 2002, we developed a series of generalized linear models to predict avian occurrences on a monthly basis in 0.5 degrees grid cells for 280 species over 2 million km2 in eastern Australia. We constructed species-specific models relating occupancy patterns to survey date and location, rainfall, and derived habitat preference. Model complexity depended on the number of observations available. Model output was the probability of occurrence for each species at times and locations of past locust control operations within the 5-year study period. Given the high spatiotemporal variability of locust control events, the variability in predicted bird species presence was high, with 108 of the total 280 species being included at least once in the top 20 predicted species for individual space-time events. The models were evaluated using field surveys collected between 2000 and 2005, at sites with and without locust outbreaks. Model strength varied among species. Some species were under- or over-predicted as times and locations of interest typically did not correspond to those in the prediction data set and certain species were likely attracted to locusts as a food source. Field surveys demonstrated the utility of the spatially explicit species lists derived from the models but also identified the presence of a number of previously unanticipated species. These results also emphasize the need for special consideration of rare and threatened species that are poorly predicted by presence-absence models. This modeling exercise was a useful a priori approach in species risk assessments to identify species present at times and locations of locust control applications, and to discover gaps in our knowledge and need for further focused data collection.

Partial state estimation for linear systems with output and input time delays.

This paper deals with the problem of partial state observer design for linear systems that are subject to time delays in the measured output as well as the control input. By choosing a set of appropriate augmented Lyapunov-Krasovskii functionals with a triple-integral term and using the information of both the delayed output and input, a novel approach to design a minimal-order observer is proposed to guarantee that the observer error is ε-convergent with an exponential rate. Existence conditions of such an observer are derived in terms of matrix inequalities for the cases with time delays in both the output and input and with output delay only. Constructive design algorithms are introduced. Numerical examples are provided to illustrate the design procedure, practicality and effectiveness of the proposed observer.

Control flow-based malware variant detection

Static detection of malware variants plays an important role in system security and control flow has been shown as an effective characteristic that represents polymorphic malware. In our research, we propose a similarity search of malware to detect these variants using novel distance metrics. We describe a malware signature by the set of control flowgraphs the malware contains. We use a distance metric based on the distance between feature vectors of string-based signatures. The feature vector is a decomposition of the set of graphs into either fixed size k-subgraphs, or q-gram strings of the high-level source after decompilation. We use this distance metric to perform pre-filtering. We also propose a more effective but less computationally efficient distance metric based on the minimum matching distance. The minimum matching distance uses the string edit distances between programs' decompiled flowgraphs, and the linear sum assignment problem to construct a minimum sum weight matching between two sets of graphs. We implement the distance metrics in a complete malware variant detection system. The evaluation shows that our approach is highly effective in terms of a limited false positive rate and our system detects more malware variants when compared to the detection rates of other algorithms. © 2013 IEEE.

A new algorithm to design minimal multi-functional observers for linear systems

Designing minimum possible order (minimal) observers for Multi-Input Multi-Output (MIMO) linear systems have always been an interesting subject. In this paper, a new methodology to design minimal multi-functional observers for Linear Time-Invariant (LTI) systems is proposed. The approach is applicable, and it also helps in regulating the convergence rate of the observed functions. It is assumed that the system is functional observable or functional detectable, which is less conservative than assuming the observability or detectability of the system. To satisfy the minimality of the observer, a recursive algorithm is provided that increases the order of the observer by appending the minimum required auxiliary functions to the desired functions that are going to be estimated. The algorithm increases the number of functions such that the necessary and sufficient conditions for the existence of a functional observer are satisfied. Moreover, a new methodology to solve the observer design interconnected equations is elaborated. Our new algorithm has advantages with regard to the other available methods in designing minimal order functional observers. Specifically, it is compared with the most common schemes, which are transformation based. Using numerical examples it is shown that under special circumstances, the conventional methods have some drawbacks. The problem partly lies in the lack of sufficient numerical degrees of freedom proposed by the conventional methods. It is shown that our proposed algorithm can resolve this issue. A recursive algorithm is also proposed to summarize the observer design procedure. Several numerical examples and simulation results illustrate the efficacy, superiority and different aspects of the theoretical findings.

Robust non-fragile control for offshore steel jacket platform with nonlinear perturbations

This study is concerned with the design of a non-fragile controller for an offshore steel jacket platform with nonlinear perturbations. The delay-dependent sufficient conditions are derived in terms of linear matrix inequalities based on suitable Lyapunov–Krasovskii functional, the second-order reciprocally convex approach and the lower bound lemma. The results indicate asymptotic stability of the offshore steel jacket platform utilizing the proposed non-fragile controller. Besides that, robust stability conditions are derived for an uncertain offshore platform subject to the non-fragile controller. A numerical example is given to illustrate the effectiveness of the proposed theoretical results.

New H∞ control design for polytopic systems with mixed time-varying delays in state and input

This paper concerns with the problem of state-feedback H∞ control design for a class of linear systems with polytopic uncertainties and mixed time-varying delays in state and input. Our approach can be described as follows. We first construct a state-feedback controller based on the idea of parameter-dependent controller design. By constructing a new parameter-dependent Lyapunov-Krasovskii functional (LKF), we then derive new delay-dependent conditions in terms of linear matrix inequalities ensuring the exponential stability of the corresponding closed-loop system with a H∞ disturbance attenuation level. The effectiveness and applicability of the obtained results are demonstrated by practical examples.

A method for stereo-vision based tracking for robotic applications

Vision based tracking of an object using the ideas of perspective projection inherently consists of nonlinearly modelled measurements although the underlying dynamic system that encompasses the object and the vision sensors can be linear. Based on a necessary stereo vision setting, we introduce an appropriate measurement conversion techniques which subsequently facilitate using a linear filter. Linear filter together with the aforementioned measurement conversion approach conforms a robust linear filter that is based on the set values state estimation ideas; a particularly rich area in the robust control literature. We provide a rigorously theoretical analysis to ensure bounded state estimation errors formulated in terms of an ellipsoidal set in which the actual state is guaranteed to be included to an arbitrary high probability. Using computer simulations as well as a practical implementation consisting of a robotic manipulator, we demonstrate our linear robust filter significantly outperforms the traditionally used extended Kalman filter under this stereo vision scenario. © 2008 IEEE.

Does tobacco-control mass media campaign exposure prevent relapse among recent quitters?

OBJECTIVE: To determine whether greater mass media campaign exposure may assist recent quitters to avoid relapse. METHOD: Using date of data collection and postcode, media market estimates of televised tobacco-control advertising exposure measured by gross ratings points (GRPs) were merged with a replenished cohort study of 443 Australians who had quit in the past year. Participants' demographic and smoking characteristics prior to quitting, and advertising exposure in the period after quitting, were used to predict relapse 1 year later. RESULTS: In multivariate analysis, each increase in exposure of 100 GRPs (i.e., 1 anti-smoking advertisement) in the three-month period after the baseline quit was associated with a 5% increase in the odds of not smoking at follow-up (OR = 1.05, 95% CI 1.02-1.07, p < 0.001). This relationship was linear and unmodified by length of time quit prior to the baseline interview. At the mean value of 1081 GRPs in the 3 months after the baseline-quit interview, the predicted probability of being quit at follow-up was 52%, whereas it was 41% for the minimum (0) and 74% for the maximum (3,541) GRPs. CONCLUSION: Greater exposure to tobacco-control mass media campaigns may reduce the likelihood of relapse among recent quitters.