890 resultados para hotel redevelopment
Resumo:
International practice-led design research in landscape architecture has identified wetland sites as highly significant and potentially fragile environments in many countries. China has considerable wetland acreage that has been drained and transformed into farmland to address local poverty of farmers. An important gap in knowledge exists as to how to design Chinese public open spaces to reduce water contamination, flood severity and loss of farmland for local villagers as urban development expands. This project responded to the opportunity of introducing a new type of wetland design to Stage 3 of the Bailang River Redevelopment, Weifang City, Shandong Province. The work proposed a range of wetland design innovations for Chinese wetland environments to encourage on-site solutions to contamination and flooding problems.
Resumo:
The interactive nature of Information and Communication Technologies (ICT) is the impetus for the adoption of digital technologies by students for socialising and communicating in new ways. In particular these new ways of communication have embraced web 2.0 technologies such as Facebook© ©, however, teaching practices within educational institutions have remained relatively unchanged. This paper explores the use of the web 2.0 technology Facebook© in a Higher Educational setting to support undergraduate students. It further highlights how students in a developing country currently use this technology and their expectations for the future use of this web 2.0 technology.
Resumo:
As a result of a broad invitation extended by Professor Martin Betts, Executive Dean of the Faculty of Built Environment and Engineering, to the community of interest at QUT, a cross-disciplinary collaborative workshop was conducted to contribute ideas about responding to the Government of India’s urgent requirement to implement a program to re-house slum dwellers. This is a complex problem facing the Indian Ministry of Housing. Not only does the government aspire to eradicate existing slum conditions and to achieve tangible results within five years, but it must also ensure that slums do not form in the future. The workshop focused on technological innovation in construction to deliver transformation from the current unsanitary and overcrowded informal urban settlements to places that provide the economically weaker sections of Indian society with healthy, environmentally sustainable, economically viable mass housing that supports successful urban living. The workshop was conducted in two part process as follows: Initially, QUT academics from diverse fields shared current research and provided technical background to contextualise the challenge at a pre-workshop briefing session. This was followed by a one-day workshop during which participants worked intensively in multi-disciplinary groups through a series of exercises to develop innovative approaches to the complex problem of slum redevelopment. Dynamic, compressed work sessions, interspersed with cross-functional review and feedback by the whole group took place throughout the day. Reviews emphasised testing the concepts for their level of complexity, and likelihood of success. The two-stage workshop process achieved several objectives: Inspired a sense of shared purpose amongst a diverse group of academics Built participants’ knowledge of each other’s capacity Engaged multi disciplinary team in an innovative design research process Built participants’ confidence in the collaborative process Demonstrated that collaborative problem solving can create solutions that represent transformative change. Developed a framework of how workable solutions might be developed for the program through follow up workshops and charrettes of a similar nature involving stakeholders drawn from the context of the slum housing program management.
Resumo:
Prognostics and asset life prediction is one of research potentials in engineering asset health management. We previously developed the Explicit Hazard Model (EHM) to effectively and explicitly predict asset life using three types of information: population characteristics; condition indicators; and operating environment indicators. We have formerly studied the application of both the semi-parametric EHM and non-parametric EHM to the survival probability estimation in the reliability field. The survival time in these models is dependent not only upon the age of the asset monitored, but also upon the condition and operating environment information obtained. This paper is a further study of the semi-parametric and non-parametric EHMs to the hazard and residual life prediction of a set of resistance elements. The resistance elements were used as corrosion sensors for measuring the atmospheric corrosion rate in a laboratory experiment. In this paper, the estimated hazard of the resistance element using the semi-parametric EHM and the non-parametric EHM is compared to the traditional Weibull model and the Aalen Linear Regression Model (ALRM), respectively. Due to assuming a Weibull distribution in the baseline hazard of the semi-parametric EHM, the estimated hazard using this model is compared to the traditional Weibull model. The estimated hazard using the non-parametric EHM is compared to ALRM which is a well-known non-parametric covariate-based hazard model. At last, the predicted residual life of the resistance element using both EHMs is compared to the actual life data.
Resumo:
Road surface macro-texture is an indicator used to determine the skid resistance levels in pavements. Existing methods of quantifying macro-texture include the sand patch test and the laser profilometer. These methods utilise the 3D information of the pavement surface to extract the average texture depth. Recently, interest in image processing techniques as a quantifier of macro-texture has arisen, mainly using the Fast Fourier Transform (FFT). This paper reviews the FFT method, and then proposes two new methods, one using the autocorrelation function and the other using wavelets. The methods are tested on pictures obtained from a pavement surface extending more than 2km's. About 200 images were acquired from the surface at approx. 10m intervals from a height 80cm above ground. The results obtained from image analysis methods using the FFT, the autocorrelation function and wavelets are compared with sensor measured texture depth (SMTD) data obtained from the same paved surface. The results indicate that coefficients of determination (R2) exceeding 0.8 are obtained when up to 10% of outliers are removed.
Resumo:
One of the main challenges of slow speed machinery condition monitoring is that the energy generated from an incipient defect is too weak to be detected by traditional vibration measurements due to its low impact energy. Acoustic emission (AE) measurement is an alternative for this as it has the ability to detect crack initiations or rubbing between moving surfaces. However, AE measurement requires high sampling frequency and consequently huge amount of data are obtained to be processed. It also requires expensive hardware to capture those data, storage and involves signal processing techniques to retrieve valuable information on the state of the machine. AE signal has been utilised for early detection of defects in bearings and gears. This paper presents an online condition monitoring (CM) system for slow speed machinery, which attempts to overcome those challenges. The system incorporates relevant signal processing techniques for slow speed CM which include noise removal techniques to enhance the signal-to-noise and peak-holding down sampling to reduce the burden of massive data handling. The analysis software works under Labview environment, which enables online remote control of data acquisition, real-time analysis, offline analysis and diagnostic trending. The system has been fully implemented on a site machine and contributing significantly to improve the maintenance efficiency and provide a safer and reliable operation.
Resumo:
In the past two decades there has been increasing interest in branding tourism destinations in an effort to meaningfully differentiate against a myriad of competing places that offer similar attractions and facilities. The academic literature relating to destination branding commenced only as recently as 1998, and there remains a dearth of empirical data that tests the effectiveness of brand campaigns, particularly in terms of enhancing destination loyalty. This paper reports the results of an investigation into destination brand loyalty for Australia as a long haul destination in a South American market. In spite of the high level of academic interest in the measurement of perceptions of destinations since the 1970s, few previous studies have examined perceptions held by South American consumers. Drawing on a model of consumer-based brand equity (CBBE), antecedents of destination brand loyalty was tested with data from a large Chilean sample of travelers, comprising a mix of previous visitors and non-visitors to Australia. Findings suggest that destination brand awareness, brand image, and brand value are positively related to brand loyalty for a long-haul destination. However, destination brand quality was not significantly related. The results also indicate that Australia is a more compelling destination brand for previous visitors compared to non-visitors.
Resumo:
This paper addresses how social media was used to leverage votes in new media environments. Barack Obama’s social media campaign is analysed and illustrates how the Obama brand benefited from integrating social media into the campaign. Voting behaviour has changed; politicians are continually seeking new ways to communicate with their constituents. Voting on political ‘brands’ is based on an identity or image, rather than central issues. While political parties rely upon an integrated marketing communication (IMC) approach, with a focus on building the (political) brand of the party and brand relationships, communication is no longer fully controlled by the marketers.
Resumo:
It is possible for the visual attention characteristics of a person to be exploited as a biometric for authentication or identification of individual viewers. The visual attention characteristics of a person can be easily monitored by tracking the gaze of a viewer during the presentation of a known or unknown visual scene. The positions and sequences of gaze locations during viewing may be determined by overt (conscious) or covert (sub-conscious) viewing behaviour. This paper presents a method to authenticate individuals using their covert viewing behaviour, thus yielding a unique behavioural biometric. A method to quantify the spatial and temporal patterns established by the viewer for their covert behaviour is proposed utilsing a principal component analysis technique called `eigenGaze'. Experimental results suggest that it is possible to capture the unique visual attention characteristics of a person to provide a simple behavioural biometric.
Resumo:
Porous yttria-stabilized zirconia (YSZ) has been regarded as a potential candidate for bone substitute due to its high mechanical strength. However, porous YSZ is biologically inert to bone tissue. It is therefore necessary to introduce bioactive coatings onto the walls of the porous structures to enhance its bioactivity. In this study, porous YSZ scaffolds were prepared using a replication technique and then coated with mesoporous bioglass due to its excellent bioactivity. The microstructures were examined using scanning electron microscopy and the mechanical strength was evaluated via compression test. The biocompatibility and bioactivity were also evaluated using bone marrow stromal cell (BMSC) proliferation test and simulated body fluid test.
Resumo:
We describe a novel two stage approach to object localization and tracking using a network of wireless cameras and a mobile robot. In the first stage, a robot travels through the camera network while updating its position in a global coordinate frame which it broadcasts to the cameras. The cameras use this information, along with image plane location of the robot, to compute a mapping from their image planes to the global coordinate frame. This is combined with an occupancy map generated by the robot during the mapping process to track the objects. We present results with a nine node indoor camera network to demonstrate that this approach is feasible and offers acceptable level of accuracy in terms of object locations.
Resumo:
Objective: Regeneration of osseous defects by tissue-engineering or cell delivery approach provides a novel means of treatment utilizing cell biology, materials sciences, and molecular biology. The concept of in vitro explanted mesenchymal stem cells (MSCs) with an ability to induce new bone formation has been demonstrated in some small animal models. However, contradictory results have been reported regarding the regenerative capacity of MSCs after ex vivo expansion due to the lack of the understanding of microenvironment for MSC differentiation in vivo. ----- ----- Methods: In our laboratory tissue-derived and bone marrow-derived MSCs have been investigated in their osteogenesis. Cell morphology and proliferation were studied by microscopy, confocal microscopy, FACS and cell counting. Cell differentiation and matrix formation were analysed by matrix staining, quantitative PCR, and immunohistochemistry. A SCID skull defect model was used for cell transplantation studies.----- ----- Results: It was noted that tissue-derived and bone marrow-derived MSCs showed similar characteristics in cell surface marker expression, mesenchymal lineage differentiation potential, and cell population doubling. MSCs from both sources could initiate new bone formation in bone defects after delivery into a critical size defects. The bone forming cells were from both transplanted cells and endogenous cells from the host. Interestingly, the majority of in vitro osteogenic differentiated cells did not form new bone directly even though mineralized matrix was synthesized in vitro by MSCs. Furthermore, no new bone formation was detected when MSCs were transplanted subcutaneously.----- ----- Conclusion: This study unveiled the limitations of MSC delivery in bone regeneration and proposed that in vivo microenvironment needs to be optimized for MSC delivery in osteogenesis.
Resumo:
As higher education institutions respond to government targets to widen participation, their student populations will become increasingly diverse, and the issues around student success and retention will be more closely scrutinised. The concept of student engagement is a key factor in student achievement and retention and Australasian institutions have a range of initiatives aimed at monitoring and intervening with students who are at risk of disengaging. Within the widening participation agenda, it is absolutely critical that these initiatives are designed to enable success for all students, particularly those for whom social and cultural disadvantage have been a barrier. Consequently, for the sector, initiatives of this type must be consistent with the concept of social justice and a set of principles would provide this foundation. This session will provide an opportunity for participants to examine a draft set of principles and to discuss their potential value for the participants’ institutional contexts.
Resumo:
This paper proposes a theoretical model for e-Government in Malaysia and addresses issues involved in its implementation. It presents three possible models including the Framework for Electronic Government (Grant & Chau, 2005), the Three Pillars Framework (Georgescu, 2007) and The Grid-Group Theory from cultural studies (Douglas, 1996) and integrates and adapts them to the specific needs of the Malaysian environment.
Resumo:
[Selection of papers from the Older Road User Safety Symposium, 26 November 2000, Brisbane, Australia.]----- This publication is a selection of papers on older road user safety which were presented at the Older Road User Safety Symposium on Sunday 26 November 2000 at the Sheraton Brisbane Hotel, Queensland, Australia. The Symposium was held on the day before Australia’s annual Road Safety Research, Policing and Education Conference, which provided an opportunity to garner both presenters and participants from the wider road safety community in Australia. Road safety is a large and diverse area of scholarship and practice, and many disciplines are drawn on in the processes of understanding and addressing road safety problems. The safety of older road users is no different. As this selection shows, work on older road user safety can be informed by demography, research on the mental and physical effects of ageing, social research on older people as road users, evaluation of educational and behavioural interventions, road crash analysis, engineering research and practice, and reviews of policy approaches within Australia and elsewhere. It is possible to summarise these into four constellations, which are reflected in the papers selected for this publication: social impacts and responses; physical and cognitive capability; specific road use performance; and environment/ecology. Though three years have passed since the Symposium, the issues raised in these papers remain current.