Soluble sugars and germination of Annona emarginata (Schltdl.) H. Rainer seeds submitted to immersion in GA3 up to different water contents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Assessment of the physiological potential of spinach seeds (Tetragonia tetragonoides (Pall.) Kuntze)

The efficiency of vigor tests in assessing the physiological potential of seeds depends on their standardization for different species. In this context, the research aimed to study specific methodologies to evaluate the vigor of spinach seeds (Tetragonia tetragonoides). For this purpose, five lots of spinach seed cv. New Zealand were submitted to germination, first count of germination, seedling emergence in the field, accelerated aging (with and without use of saturated solution of NaCl at 41and 45 ºC for 24,48 and 72 hours), controlled deterioration (18,21 and 24% seed water content adjustments for 24 hours at 45 ºC) and electrical conductivity tests with variations inwater volume (25, 50 and 75 mL), seed quantity (25 and 50) and soaking period (1, 2, 4, 8,12, 16 and 24 hours) at 25 ºC. The first count test allowed obtaining preliminary information about seed vigor, and other tests in general showed similarity with seedling emergence in the field. Thus, it was concluded that traditional accelerated aging test 24 h /41 ºC and accelerated aging test with saturated salt solution for 24 h at 41 ºC and 45 ºC, and controlled deterioration test with 21% seed water content / 24 h / 45 ºC were all efficient for evaluating the physiological potential of spinach seeds.

Carcass and meat traits of lambs fed by-products from the processing of oil seeds

We evaluated the effect of adding by-products from the processing of oil seeds in the diet of lambs on the carcass and meat traits. Twenty-four non-castrated weaned male Santa Inês lambs with approximately 70 days of age and initial average weight of 19.11 ± 2.12 kg were distributed into a completely randomized design. Treatments consisted of diets containing by-products with 70% of concentrate and 30% of tifton hay (Cynodon spp.) and were termed SM: control with soybean meal; SC: formulated with soybean cake; SUC: formulated with sunflower cake and PC: formulated with peanut cake. Diets had no effects on the carcass traits evaluated. There was no significant effect on the mean values of perirenal, omental and mesenteric fats (0.267, 0.552 and 0.470 kg, respectively) and there was no influence on the percentages of moisture, ether extract, crude protein or ash in the loin between experimental diets. Diets containing by-products from the processing of oil seeds did not change fatty acids found in lamb meat. The use of by-products from oil seeds provided similar carcass and meat traits, thus their use can be recommended as eventual protein and energy sources for feedlot lambs.

Seasonal variation in the fate of seeds under contrasting logging regimes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Maturity, Pulp Removal and Storage Effects on the Germination of Livistona rotundifolia Seeds

The Livistona rotundifolia species is native to Oceania, and has a high potential for landscaping use and as a pot plant. This work aimed to study the effects of the maturation stage, pulp removal and storage on the germination of L. rotundifolia seeds. The experimental design was entirely randomized in a factorial arrangement 5x2x2 (five storage periods: 15, 30, 45, 60 and 75 days; two maturation stages: green and ripe; and the presence or absence of the pulp - exocarp and mesocarp) with four replications of 25 seeds each. After sorting out the fruits by the maturity stage and removing the pulp out of half of the fruits from each plot, the seeds were placed in closed bottles, which were sealed and stored in a cold chamber at 10 degrees C. The seeds were removed from the cold chamber and left to germinate in plastic boxes (gerbox type) with sphagnum. The boxes were kept at 25-35 degrees C and photoperiod of 12 hours. The germination rate was determined when seed germination was steady. The highest germination rate was found when green fruits had their pulp removed. The germination rate gradually decreased with the increase of the storage period regardless the maturation stage and the presence or absence of the pulp.

Effects of the Temperature and Maturation Stages on the Germination of Roystonea regia Seeds

Roystonea regia (Kunth) O.F. Cook is largely used as ornamental. The propagation is done almost exclusively by seeds; however, there is a great variation in the germination process influenced by many factors. The objective of this work was to study the effects of the temperature and maturation stages on the germination of R. regia seeds. The experimental design was entirely randomized in a factorial arrangement 6x3 (six temperatures: constant at 20, 25, 30 and 35 degrees C and alternated at 20-30 and 25-35 degrees C, with a photoperiod of 12 hours; and three fruit maturation stages: brown, yellow and black), with four replications of 25 disseminules (seed with stucked endocarp) each. The disseminules had their mesocarp and exocarp were removed and shade dried. Their moisture content was determined, and then they were placed in plastic boxes (gerbox type) containing vermiculite. The disseminules, with the germinative intumescence, were daily noted until germination was steady. The germination rate and the germination speed index were calculated, and the data were submitted to the variance analysis. The means were compared by the Tukey test. It was concluded that the highest germination rate (99.7%) and germination speed were obtained by seeds from mature (black) fruits at the temperature of 35 degrees C.

Germination of Phoenix roebelenii Seeds

The Phoenix roebelenii O'Brien is one of the most used plants in the Brazilian landscape. The work aimed to study the effect of different fruit harvesting locations, associated with seven temperature conditions, on the germination of P. roebelenii seeds. The fruits were collected from two different locations: Ilha Solteira, western Sao Paulo State and Jaboticabal in the middle East of the same State. The disseminules (seeds with stucked endocarp) were placed in plastic boxes (gerbox), and the experimental design was entirely randomized in a factorial scheme of 7x2 (seven temperatures conditions: room temperature, constant at 20, 25, 30 and 35 degrees C and alternated at 20-30 and 25-35 degrees C; and two fruit harvesting locations: Ilha Solteira and Jaboticabal, with four replications with 25 seeds each. The disseminules that emitted the germinative intumescence were daily noted until the germinative process got steady, in about 90 days. The germination rate (G%), the germination speed index (GSI), and the means were extracted and compared by the Tukey test. The highest values of germination rate were obtained at 30, 25-35 degrees C and room temperatures. The seeds showed a higher GSI at room temperature. The fruit harvesting locations influenced the germination.

Influence of Nd:YAG Laser on the Bond Strength of Self-etching and Conventional Adhesive Systems to Dental Hard Tissues

Purpose: The aim of this study was to investigate the influence of Nd:YAG laser on the shear bond strength to enamel and dentin of total and self-etch adhesives when the laser was applied over the adhesives, before they were photopolymerized, in an attempt to create a new bonding layer by dentin-adhesive melting.Material and Methods: One-hundred twenty bovine incisors were ground to obtain flat surfaces. Specimens were divided into two substrate groups (n=60): substrate E (enamel) and substrate D (dentin). Each substrate group was subdivided into four groups (n=15), according to the surface treatment accomplished: X (Xeno III self-etching adhesive, control), XL (Xeno III + laser Nd:YAG irradiation at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental), S (acid etching + Single Bond conventional adhesive, Control), and SL (acid etching + Single Bond + laser Nd:YAG at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental). The bonding area was delimited with 3-mm-diameter adhesive tape for the bonding procedures. Cylinders of composite were fabricated on the bonding area using a Teflon matrix. The teeth were stored in water at 37 degrees C/48 h and submitted to shear testing at a crosshead speed of 0.5 mm/min in a universal testing machine. Results were analyzed with three-way analysis of variance (ANOVA; substrate, adhesive, and treatment) and Tukey tests (alpha=0.05). ANOVA revealed significant differences for the substrate, adhesive system, and type of treatment: lased or unlased (p<0.05). The mean shear bond strength values (MPa) for the enamel groups were X=20.2 +/- 5.61, XL=23.6 +/- 4.92, S=20.8 +/- 4.55, SL=22.1 +/- 5.14 and for the dentin groups were X=14.1 +/- 7.51, XL=22.2 +/- 6.45, S=11.2 +/- 5.77, SL=15.9 +/- 3.61. For dentin, Xeno III self-etch adhesive showed significantly higher shear bond strength compared with Single Bond total-etch adhesive; Nd:YAG laser irradiation showed significantly higher shear bond strength compared with control (unlased).Conclusion: Nd:YAG laser application prior to photopolymerization of adhesive systems significantly increased the bond strength to dentin.

Seedling Development and Evaluation of Genetic Stability of Cryopreserved Dendrobium Hybrid Mature Seeds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Absence of detection of xanthomonas axonopodis pv. malvacearum in cotton seeds used in the Northeast Region of Mato Grosso do Sul in a three-based crop season study

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sequential sampling of soybean and beans seeds for Sclerotinia sclerotiorum detection (Lib.) DeBary

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agroclimatic zoning of the state of Minas Gerais for the production of high quality soybean seeds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of cellulose nanofibrils on soft and hard segments of polyurethane/cellulose nanocomposites and effect of humidity on their mechanical properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New reductive addition of hard nucleophiles to 6,7-bis(methylsulfanyl)-1,4-dihydro-1,4-methanonaphthalene-5,8-dione

A new reaction mode of 6,7-bis(methylsulfanyl)-1,4-dihydro-1,4-methanonaphthalene-5,8-dione 1 with the hard nucleophiles sodium benzene- or methane-sulfinate and cyanide, in DMSO, at room temperature, leads to the unexpected hydroquinonoid products 3a-c. All the data are in agreement with a mechanistic pathway involving the initial attack of the hard nucleophile onto the hard carbonyl group, followed by a symbiotic re-attack of the oxygen on the incoming group. In the case of soft nucleophiles, reaction on the olefinic carbon of the enedione system is preferential.