Comparative study of seasonal changes in some blood parameters and genetic polymorphisms of serum antibodies and antigens on red blood cells surface in immature Caspian salmon

Seasonal sampling from 40 immature Caspian salmon were performed in summer, autumn, winter and spring. The maximum ranges of RBC counts, Hct, Hb, WBC count and clotting times were observed in spring, summer, spring, spring and winter, respectively. The minimum amounts of these factors were counted in summer, winter, winter, winter and winter, respectively. Blood Samples were taken from healthy smolt, immature and adult Caspian salmon in spawning time. Hematological determinations and biochemical serum analysis were performed in 101 fish in the three samples. The ranges of hematological values for sample mean were counted. Red blood cell counts were 866600 mm3 and 1259400 mm3 in smolt and adult respectively. Hematocrit was 48.39% in smolt and 44.29% in adult. Hemoglobin was 8.85 gr/dl in smolt and 10.91 gr/dl in adult. White blood cell count was 8781.58 mm3 in smolt and 5217.55 mm3 in adult and mean were differential of WBC, Lymphocyte 90.57%in smolt and73.22% in adult. Neutrophil was 5.12% in smolt and 16.92% in adult, Monocyte were 1.27% in smolt and 4.24% in adult, Clotting time was 282.34 Seconds in smolt and 291.47 seconds in adult MCV, MCH and MCHC also meagered in smolt and adult. Biochemical parameter in immature and mature Caspian salmon meagered .Glucose concentration was 2.97 mmol.l- in immature and 1.99 mmol.l- in mature .Cholesterol concentration was 4.26 mmol.l- in immature and 7.06 mmol.l- in mature. Triglyceride amount was 2.35 mmol.l- in immature and 2.47 mmol.l- in mature and Calcium was 2.47 in immature and 2.61 mmol.l- in mature. An in situ study was made on erythrocytic isoantigens and hetero-antigen and their corresponding iso-and hetero-antibodies of sera by means of hemoagglutination tests on the blood sample, of 450 immature and 50 mature Caspian salmon. The absence of erythrocyte iso-antigens and hetero-antigen and their corresponding iso-and hetero-antibodies were shown by the experimental. It could be indicated an intra-specific variation and differences in species for kelardasht hatchery.

The study of biological characteristics and determination of population dynamic parameters of sawtooth barracuda (Sphyraena putnamae) in the Persian Gulf (Hormozgun Province waters)

The biological characteristics and population dynamisms of Sphyraena putnamae, were studied in the northern Persian Gulf and Oman Sea restricted to Hormuzgan province waters within 13 months period, from November 2006 up to November 2007. Biometrical and anatomical measurements were carried out, and biological surveys were conducted on 486 specimens. On the other hand, the growth and mortality parameters were estimated by using 3096 samples. These samples were collected from 3 landings, namely Bandar Abbas, Bandar Lengeh and Bandar Jask. The measurements of the minimum and maximum Fork lengths and weights were 11.7 to 8.03 cm and 135.0 to 4140.0 g, respectively. The results indicated that this species, having the Relative Length of Gut, RLG=0.34±0.002, is strongly carnivorous (often fish-eater), proven by the fact that more than 98% of its stomach contents were fish pieces. Examining the changes in the index of stomach emptiness by the percentage of CV = 0.47% indicates that this fish is Moderate feeder. The level of feeding increased in March, before spawning and decreased in June and September, simultaneously with the spawning season. There are 2 peaks of reproduction or spawning seasons during the months of April-May and September, of which the prior is assumed as the main spawning. The sex ratio (M:F) was calculated 0.5:1.0(X2 =2.11), which did not show a significant difference with expected level of 1:1 (P>0.05). The average absolute and relative reproduction rates of Sphyraena putnamae is respectively as follows: 1866827.1±255448.9 and 1097.7±94.3. The highest and the lowest diameter of matured egg are from 200 to 750 μ, and its average diameter is 402.10 ± 0.190 μ. A parameter for Saw-tooth barracuda length measurement, Lm50, based on the Fork-length, was calculated as 54.01 cm. In other words, as far as the fisheries management is concerned, the fish whose lengths are less than 54.01 cm should not be caught. The calculated level of (R2) (correlations of total length & weight), indicated strong correlations between length and weight of this fish, and the obtained formula included W =0.007100 FL 2.9295 and reinforced this assumption. The “K” Index for this fish in 3 above mentioned landings (Jask, Bandar-Abbas and Bandar-Length) were 1.24, 0.37 and 0.46 per year, respectively and the FL index for the same landings were estimated as 129, 110 and 134 cm, respectively. The growth coefficient (MONRO) for the above mentioned regions were calculated as 3.601, 3.647 and 3.917, respectively; and in the surveyed regions there were no significant differences in populations. The Total mortality coefficient (Z) was calculated 0.76, 1.12 and 1.07 per year, the Natural mortality coefficient was 0.46, 0.63 and 0.70, and the Fishing mortality coefficient (rate) (F) was found to be 0.30, 0.49 and 0.37 per year. The value of the exploitation rate (E) is equal to 0.39 per year, indicating that this species is an under-exploited resource, and there is no excessive fishing pressure on the fish supply of this species in the afore-said regions. The highest level of exploitation was found for ‘Bandar Abbas’ fishing region and the lowest level of exploitation is in ‘Bandar Lengeh’ waters.

The biology, ecology, population parameters and the fishery of the Nile tilapia, Oreochromis niloticus (L)

Oreochromis niloticus (the Nile tilapia) and three other ti1apine species: Oreochromis leucostictus, Tilapia zi11ii and T. rendallii were introduced into Lakes Victoria, Kyoga and Nabugabo in 1950s and 1960s. The source and foci of the stockings are given by Welcomme (1966) but the origin of the stocked species was Lake Albert. The Nile tilapia was introduced as a management measure to relieve fishing pressure on the endemic tiapiines and, since it grows to a bigger size, to encourage a return to the use of larger mesh gill nets. Ti1apia zillii was introduced to fill a vacant ,niche of macrophytes which could not be utilised' by the other tilapiines. Tilapia rendallii, and possibly T. leucosticutus could been introduced into these lakes accidently as a consquence of one of the species being tried out for aquaculture. The Nile perch and Nile tilapia have since fully established themselves and presently dominate the commercial fisheries of Lakes Victoria and Kyoga. The original fisheries based on the endemic tilapiines O. escu1entus and o. variabilis have collapsed. It is hypothesized that the ecological and limnological changes that are observed in Lakes Victoria and Kyoga are due to a truncation of the original food webs of the two lakes. Under the changed conditions, O. niloticus to be either playing a stabilizing role or fuelling nutrient turnover in the lakes. Other testable hypotheses point to the possible role of predation by the Nile perch, change in regional climate and hydrology in the lake basins.

Population parameters of Oreochromis leucostictus from Lake Naivasha, Kenya

Length-frequency data collected from fish landings on Lake Naivasha were used to estimate the growth parameters: total mortality (Z), growth performance index (Ø’), exploitation rate and recruitment pattern in Oreochromis leucostictus. The asymptotic length (L∞) was 38 cm and K 0.48 yr -1 Z was estimated as 3.5 yr -1, M was 0.19 yr -1, F was 2.6 yr -1 and E of 0.74. Recruitment occurs throughout the year, with a peak in January to March, while entry into the fishery occurs at a mean length of 15.9 cm. Existing restriction on the maximum number of gill nets allowed per fishing licence (10 per boat) and a minimum mesh size (10 cm) in the lake are not adhered to. Poaching using illegal mesh size nets as small as 5 cm and use of more than 10 nets per boat are common in the lake.

Parameters influencing the performance of an IGBT gate drive

This paper presents an improvement of an IGBT gate drive implementing Active Voltage Control (AVC), and investigates the impact of various parameters affecting its performance. The effects of the bandwidths of various elements and the gains of AVC are shown in simulation and experimentally. Also, the paper proposes connecting a small Active Snubber between the IGBT collector and its gate integrated within the AVC. The effect of this snubber on enhancing the stability of the gate drive is demonstrated. It will be shown that using a wide bandwidth operational amplifier and integrating the Active Snubber within the gate drive reduces the minimum gate resistor required to achieve stability of the controller. Consequently, the response time of the IGBT to control signals is significantly reduced, the switching losses then can be minimised and, hence, the performance of gate drive as whole is improved. This reflects positively on turn-off and turn-on transitions achieving voltage sharing between the IGBTs connected in series to construct a higher voltage switch, making series IGBTs a feasible practice. ©2008 IEEE.

Parameters identification by a single point free response measurement

When a thin rectangular plate is restrained on the two long edges and free on the remaining edges, the equivalent stiffness of the restraining joints can be identified by the order of the natural frequencies obtained using the free response of the plate at a single location. This work presents a method to identify the equivalent stiffness of the restraining joints, being represented as simply supporting the plate but elastically restraining it in rotation. An integral transform is used to map the autospectrum of the free response from the frequency domain to the stiffness domain in order to identify the equivalent torsional stiffness of the restrained edges of the plate and also the order of natural frequencies. The kernel of the integral transform is built interpolating data from a finite element model of the plate. The method introduced in this paper can also be applied to plates or shells with different shapes and boundary conditions. © 2011 Elsevier Ltd. All rights reserved.

The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand.

In this paper, we review the energy requirements to make materials on a global scale by focusing on the five construction materials that dominate energy used in material production: steel, cement, paper, plastics and aluminium. We then estimate the possibility of reducing absolute material production energy by half, while doubling production from the present to 2050. The goal therefore is a 75 per cent reduction in energy intensity. Four technology-based strategies are investigated, regardless of cost: (i) widespread application of best available technology (BAT), (ii) BAT to cutting-edge technologies, (iii) aggressive recycling and finally, and (iv) significant improvements in recycling technologies. Taken together, these aggressive strategies could produce impressive gains, of the order of a 50-56 per cent reduction in energy intensity, but this is still short of our goal of a 75 per cent reduction. Ultimately, we face fundamental thermodynamic as well as practical constraints on our ability to improve the energy intensity of material production. A strategy to reduce demand by providing material services with less material (called 'material efficiency') is outlined as an approach to solving this dilemma.

The effects of operational and design parameters on the tolerance of ADSR fuel pin cladding to beam interruptions

This paper investigates the effects of design parameters, such as cladding and coolant material choices, and operational phenomena, such as creep and fission product decay heat, on the tolerance of Accelerator Driven Subcritical Reactor (ADSR) fuel pin cladding to beam interruptions. This work aims to provide a greater understanding of the integration between accelerator and nuclear reactor technologies in ADSRs. The results show that an upper limit on cladding operating temperature of 550 °C is appropriate, as higher values of temperature tend to accelerate creep, leading to cladding failure much sooner than anticipated. The effect of fission product decay heat is to reduce significantly the maximum stress developed in the cladding during a beam-trip-induced transient. The potential impact of irradiation damage and the effects of the liquid metal coolant environment on the cladding are discussed. © 2013 Elsevier Ltd. All rights reserved.