Critical-point Properties of Liquids and the Born-Green Theory

Recent work of Jones et al. giving the long-range behaviour of the pair correlation function is used to confirm that the critical ratio Pc/nckBTc = 1/2 in the Born-Green theory. This deviates from experimental results on simple insulating liquids by more than the predictions of the van der Waals equation of state. A brief discussion of conditions for thermodynamic consistency, which the Born-Green theory violates, is then given. Finally, the approach of the Ornstein-Zernike correlation function to its critical point behaviour is discussed within the Born-Green theory.

Preparation and properties of nickel(II) complex dyes

The preparation and properties of five new dyes derived from nickel(I1) ions and aromatic azo derivatives of ethylenebls(P-ketoesters) are reported.

The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

Ion irradiation as a tool for modifying the surface and optical properties of plasma polymerised thin films

Radio frequency (R.F.) glow discharge polyterpenol thin films were prepared on silicon wafers and irradiated with I10+ ions to fluences of 1 × 1010 and 1 × 1012 ions/cm2. Post-irradiation characterisation of these films indicated the development of well-defined nano-scale ion entry tracks, highlighting prospective applications for ion irradiated polyterpenol thin films in a variety of membrane and nanotube-fabrication functions. Optical characterisation showed the films to be optically transparent within the visible spectrum and revealed an ability to selectively control the thin film refractive index as a function of fluence. This indicates that ion irradiation processing may be employed to produce plasma-polymer waveguides to accommodate a variety of wavelengths. XRR probing of the substrate-thin film interface revealed interfacial roughness values comparable to those obtained for the uncoated substrate's surface (i.e., both on the order of 5 Å), indicating minimal substrate etching during the plasma deposition process.

Estimating the economic implications for grazing properties in the Mackay Whitsunday catchments of practice changes to more sustainable landscapes.

In the Mackay Whitsunday region, the dominant grazing based operations are small intensive systems that heavily utilise soil, nutrient and chemical management practices. To improve water quality entering the Great Barrier Reef, graziers are being encouraged to adopt improved management practices. However, while there is good understanding of the management changes required to reach improved practice classification levels, there is poor understanding of the likely economic implications for a grazier seeking to move from a lower level classification to the higher level classifications. This paper provides analysis of the costs and benefits associated with adoption of intensive grazing best management practices to determine the effect on the profitability and economic sustainability of grazing enterprises, and the economic viability of capital investment to achieve best management. The results indicate that financial incentives are likely to be required to encourage smaller graziers to invest in changing their management practices, while larger graziers may only require incentives to balance the risk involved with the transition to better management practices.

Optical and chemical properties of polyterpenol thin films deposited via plasma-enhanced chemical vapor deposition

The development of novel organic polymer thin films is essential for the advancement of many emerging fields including organic electronics and biomedical coatings. In this study, the effect of synthesis conditions, namely radio frequency (rf) deposition power, on the material properties of polyterpenol thin films derived from nonsynthetic environmentally friendly monomer was investigated. At lower deposition powers, the polyterpenol films preserved more of the original monomer constituents, such as hydroxy functional groups; however, they were also softer and more hydrophilic compared to polymers fabricated at higher power. Enhanced monomer fragmentation and consequent reduction in the presence of the polar groups in the structure of the high-power samples reduced their optical band gap value from 2.95 eV for 10 W to 2.64 eV for 100 W. Regardless of deposition power, all samples were found to be optically transparent with smooth, defect-free, and homogenous surfaces.

Effect of organic gate dielectric material properties on interfacial charging and discharging of pentacene MIM device

The effect of material properties of an environmentally friendly, optically transparent dielectric material, polyterpenol, on the carrier transients within the pentacene-based double-layer MTM device was investigated. Polyterpenol films were RF plasma polymerised under varied process conditions, with resultant films differing in surface chemistry and morphology. Independent of type of polyterpenol, time-resolved EFISHG study of IZO/polyterpenol/pentacene/Au structures showed similar transient behaviour with carriers injected into pentacene from Au electrode only, confirming polyterpenol to be a suitable blocking layer for visualisation of single-species carrier transportation during charging and discharging under different bias conditions. Polyterpenol fabricated under higher input power show better promise due to higher chemical and thermal stability, improved uniformity, and absence of defects.

Nanotribological and nanomechanical properties of plasma-polymerized polyterpenol thin films

Organic plasma polymers are currently attracting significant interest for their potential in the areas of flexible optoelectronics and biotechnology. Thin films of plasma-polymerized polyterpenol fabricated under varied deposition conditions were studied using nanoindentation and nanoscratch analyses. Coatings fabricated at higher deposition power were characterized by improved hardness, from 0.33 GPa for 10 W to 0.51 GPa for 100 W at 500-μN load, and enhanced wear resistance. The elastic recovery was estimated to be between 0.1 and 0.14. Coatings deposited at higher RF powers also showed less mechanical deformation and improved quality of adhesion. The average (R a) and root mean square (R q) surface roughness parameters decreased, from 0.44 nm and 0.56 nm for 10 W to 0.33 nm and 0.42 nm for 100 W, respectively.

Plasma polymerisation and retention of antibacterial properties of terpinen-4-ol

Plasma polymerisation was used to deposit thin oligomeric films of terpinen-4-ol on a range of substrates. The coatings were examined in terms of their chemical properties and surface architecture to ascertain the changes in chemical composition as a result of exposure to the plasma field. The antifouling and antimicrobial activity of oligomeric terpinen-4-ol coatings were then examined against such human pathogens as Staphylococcus aureus, Pseudomonas aeruginosa and Staphylococcus epidermis. The bacterial adhesion patterns were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM) and confocal scanning laser microscopy (CSLM).

Effect of iodine doping on surface and optical properties of polyterpenol thin films

This study presents the effect of iodine doping on optical and surface properties of polyterpenol thin films deposited from non-synthetic precursor by means of plasma polymerisation. Spectroscopic ellipsometry studies showed iodine doping reduced the optical band gap from 2.82 eV to 1.50 eV for pristine and doped samples respectively. Higher levels of doping notably reduced the transparency of films, an issue if material is considered for applications that require high transparency. Contact angle studies demonstrated higher hydrophilicity for films deposited at increased doping levels, results confirmed by XPS Spectroscopy and FTIR. Doping had no significant effect on the surface profile or roughness of the film.

Mass transfer properties (permeability and mass diffusivity) of four Australian hardwood species

Characterisation of mass transfer properties was achieved in the longitudinal, radial, and tangential directions for four Australian hardwood species: spotted gum, blackbutt, jarrah and messmate. Measurement of mass transfer properties for these species was necessary to complement current vacuum drying modelling research. Water-vapour diffusivity was determined in steady state using a specific vapometer. Permeability values of some species and material directions were extremely low and undetectable by the mass flow meter device. Hence, a custom system based on volume evolution was conceived to determine very low, previously unpublished, wood permeability values. Mass diffusivity and permeability were lowest for spotted gum and highest for messmate. Except for messmate, in the radial direction, the four species measured were less permeable in all directions than the lowest published figures, demonstrating the high impermeability of Australian hardwoods and partly accounting for their relatively slow drying rates. Premeability, water-vapour diffusivity, and associated anisotropic ratio data obtained for messmate were extreme or did not follow typical trends and is consequently the most difficult of the four woods to dry in terms of collapse and checkinng degradation.

The wood properties of subtropical and tropical hardwood plantation timber grown for high-value products in Australia

Wood quality and properties of plantation grown trees differ from those from mature, natural grown trees and this has implications for processing, manufacturing and product performance. The wood properties of genetically improved and syliculturally managed plantation trees are affected by their faster growth rates younger harvest age. This report summarises the key wood properties of species that are the primary candidates for plantation forestry in the subtropical to tropical region of eastern Australia. The planned end uses for these trees vary from short-rotation pulp to high-value products such as poles, sawn timber for appearance products and engineered wood products including structural plywood and laminated veneer lumber (LVL).

Sweetpotato consumer research: insights to increasing consumption

This report provides an evaluation of the behaviours and purchasing drivers of key sweetpotato consumers defined by Nielsen consumer research as Established Couples (two or more adults with no children 17 and under, and head of house 35-59), Senior Couples (two or more adults with no children 17 or under, and head of house 60 or over), and Independent Singles (one person household 35 or over, no children 17 or under). Research was qualitative in nature. Methods used included focus groups, depth interviews and shop-a-longs. The report found that preferences for sweetpotato amongst these groups were varied. In general a smaller torpedo shaped vegetable was valued for ease of preparation and the convenience of being of sufficient size for a meal for two. Satisfaction with sweetpotato was high with negative comments on quality exceedingly rare within discussions. However, shop-a-longs revealed that some quality issues were apparent at retail such as withered product, pitting and occasionally damage. A display with stock resting in any amount of water was a barrier to purchase for consumers and this was apparent on two out 15 occasions. A high quality sweetpotato was of a deep orange/red colour, had a smooth skin and was extremely dense and hard. An inferior sweetpotato was wrinkly, spongy, pitted and damaged. Awareness of sweetpotato was a relatively recent phenomenon amongst the respondents of this study with most recalling eating the vegetable in the last five to 10 years. Life-time eating patterns emerged as a consequence of childhood food experiences such as growing up with a ‘meat and three’ veg philosophy and traditional Australian meals. However, this was dependent on cultural background and those with ties to diverse cultures were more likely to have always known of the vegetable. Sweetpotato trial and consumption coincided with a breaking away from these traditional patterns, or was integrated into conventional meals such as a baked vegetable to accompany roasts. Increased health consciousness also led to awareness of the vegetable. A primary catalyst for consumption within the Established and Senior Couples groups was the health benefits associated with sweetpotato. Consumers had very little knowledge of the specific health properties of the vegetable and were surprised at the number of benefits consumption provided. Sweetpotato was important for diabetics for its low Glycemic Index status. Top-of-the-mind awareness of the vegetable resulted from the onset of the disease. Increasing fibre was a key motive for this demographic and this provided a significant link between consumption and preventing bowel cancer. For those on a weight loss regime, sweetpotato was perceived as a tasty, satisfying food that was low in carbohydrates. Swapping behaviours where white potato was replaced by sweetpotato was often a response to these health concerns. Other health properties mentioned by participants through the course of the research included the precursor β-carotene and Vitamins A & C. The sweetpotato was appreciated for its hedonic and timesaving qualities. For consumers with a high involvement in food, the vegetable was valued for its versatility in meals. These consumers took pride in cooking and the flavour and texture of sweetpotato lent itself to a variety of meals such as soups, salads, roasts, curries, tagines and so on. Participants who had little time or desire to prepare and cook meals valued sweetpotato because it was an easy way to add colour and variety to the plate and because including an orange vegetable to meals is a shortcut to ensuring vitamin intake. Several recommendations are made to the sweetpotato industry. • Vigorously promote the distinct nutritional and health properties of sweetpotatoes, particularly if they can be favourably compared to other vegetables or foods • Promote the salient properties to specific targets such as diabetics, those that are at risk to bowel cancer, and those embarking on a weight-loss regime. Utilise specialist channels of communication such as diabetic magazines and websites • Promote styles of cooking of sweetpotato that would appeal to traditionalists such as roasts and BBQs • Promote the vegetable as a low maintenance vegetable, easy to store, easy to cook and particularly focusing on it as a simple way to boost the appearance and nutritional value of meals. • Promote the vegetable to high food involvement consumers through exotic recipes and linking it to feelings of accomplishment with cooking • Promote the versatility of the vegetable • Devise promotions that link images and tone of communications with enjoying life to the fullest, having time to enjoy family and grandchildren, and of partaking in social activities • Educate retailers on consumer perceptions of quality and ensuring moisture and mould is not present at displays Qualitative information while providing a wealth of detail cannot be extrapolated to the overall target population and this may be considered a limitation to the research. However, within research theory, effective quantitative design is believed to stem from the insights developed from qualitative studies. • Develop and implement a quantitative study on sweetpotato attitudes and behaviours based on the results of this study.

Extraordinary synergy in the mechanical properties of polymer matrix composites reinforced with 2 nanocarbons

One of the applications of nanomaterials is as reinforcements in composites, wherein small additions of nanomaterials lead to large enhancements in mechanical properties. There have been extensive studies in the literature on composites where a polymer matrix is reinforced by a single nanomaterial such as carbon nanotubes. In this article, we examine the significant synergistic effects observed when 2 different types of nanocarbons are incorporated in a polymer matrix. Thus, binary combinations of nanodiamond, few-layer graphene, and single-walled nanotubes have been used to reinforce polyvinyl alcohol. The mechanical properties of the resulting composites, evaluated by the nanoindentation technique, show extraordinary synergy, improving the stiffness and hardness by as much as 400% compared to those obtained with single nanocarbon reinforcements. These results suggest a way of designing advanced materials with extraordinary mechanical properties by incorporating small amounts of 2 nanomaterials such as graphene plus nanodiamond or nanodiamond plus carbon nanotube.