674 resultados para epidote
Resumo:
Structural-petrologic and isotopic-geochronologic data on magmatic, metamorphic, and metasomatic rocks from the Chernorud zone were used to reproduce the multistage history of their exhumation to upper crustal levels. The process is subdivided into four discrete stages, which corresponded to metamorphism to the granulite facies (500-490 Ma), metamorphism to the amphibolite facies (470-460 Ma), metamorphism to at least the epidote-amphibolite facies (440-430 Ma), and postmetamorphic events (410-400 Ma). The earliest two stages likely corresponded to the tectonic stacking of the backarc basin in response to the collision of the Siberian continent with the Eravninskaya island arc or the Barguzin microcontinent, a process that ended with the extensive generation of synmetamorphic granites. During the third and fourth stages, the granulites of the Chernorud nappe were successively exposed during intense tectonic motions along large deformation zones (Primorskii fault, collision lineament, and Orso Complex). The comparison of the histories of active thermal events for Early Caledonian folded structures in the Central Asian Foldbelt indicates that active thermal events of equal duration are reconstructed for the following five widely spiced accretion-collision structures: the Chernorud granulite zone in the Ol'khon territory, the Slyudyanka crystalline complex in the southwestern Baikal area, the western Sangilen territory in southeastern Tuva, Derbinskii terrane in the Eastern Sayan, and the Bayankhongor ophiolite zone in central Mongolia. The dates obtained by various isotopic techniques are generally consistent with the four discrete stages identified in the Chernorud nappe, whereas the dates corresponding to the island-arc evolutionary stage were obtained only for the western Sangilen and Bayankhongor ophiolite zone.
Resumo:
Focussing on heavy-mineral associations in the Laptev-Sea continental margin area and the eastern Arctic Ocean, 129 surface sediment samples, two short and four long gravity cores have been studied. By means of the accessory components, heavy-mineral associations of surface sediment samples from the Laptev-See continental slope allowed the distinction into two different mineralogical provinces, each influenced by fluvial input of the Siberian river Systems. Transport pathways via sea ice from the shallow shelf areas into the Arctic Ocean up to the final ablation areas of the Fram Strait can be reconstructed by heavy-mineral data of surface sediments from the central Arctic Ocean. The shallow shelf of the Laptev Sea seems to be the most important source area for terrigenous material, as indicated by the abundant occurence of amphiboles and clinopyroxenes. Underneath the mixing Zone of the two dominating surface circulation Systems, the Beaufort- Gyre and Transpolar-Drift system, the imprint of the Amerasian shelf regions up to the Fram Strait is detectable because of a characteristical heavy-mineral association dominated by detrital carbonate and opaque minerals. Based On heavy-mineral characteristics of the potential circum-Arctic source areas, sea-ice drift, origin and distribution of ice-rafted material can be reconstructed during the past climatic cycles. Different factors controlling the transport of terrigenous material into the Arctic Ocean. The entrainment of particulate matter is triggered by the sea level, which flooded during highs and lows different regions resulting in the incorporation of sediment from different source areas into the sea ice. Additionally, the fluvial input even at low stands of sea level is responsible for the delivery of material of distinct sources for entrainment into the sea ice. Glacials and interglacials of climate cycles of the last 780 000 years left a characteristical signal in the central Arctic Ocean sediments caused by the ice- rafted material from different sources in the circum-Arctic regions and its change through time. Changes in the heavy-mineral association from an amphibole-dominated into a garnet-epidote-assemblage can be related to climate-related changes in source areas and directions of geostrophic winds, the dominating drive of the sea-ice drift. During Marine Isotope Stage (MIS) 6, the central Arctic Ocean is marked by an heavy-mineral signal, which occurs in recent sediments of the eastern Kara Sea. Its characteristics are high amounts of epidote, garnet and apatite. On the other hand, during the Same time interval a continuous record of Laptev Sea sediments is documented with high contents of amphiboles on the Lomonosov Ridge near the Laptev Sea continental slope. A nearly similar Pattern was detected in MIS 5 and 4. Small-scale glaciations in the Putorana-mountains and the Anabar-shield may have caused changes in the drainage area of the rivers and therefore a change in fluvial input. During MIS 3, the heavy-mineral association of central Arctic sediments show similar patterns than the Holocene mineral assemblage which consists of amphiboles, ortho- and clinopyroxenes with a Laptev Sea source. These minerals are indicating a stable Transpolar-Drift system similar to recent conditions. An extended influence of the Beaufort Gyre is only recognized, when sediment material from the Amerasian shelf areas reached the core location PS2757-718 during Termination Ib. Based On heavy-mineral data from Laptev-Sea continental slope Core PS2458-4 the paleo-sea-ice drift in the Laptev Sea during 14.000 years was reconstructed. During Holocene sea-level rise, the bathymetrically deeper parts of the Western shelf were flooded first. At the beginning of the Atlantic stage, nearly the entire shelf was marine influenced by fully marine conditions and the recent surface circulation was established.
Resumo:
Die Sandergebiete sind von 5 Zentren her geschüttet, den Gletschertoren bei Flensburg, Frörup/Översee, Idstedt/Lürschau, Schleswig, Owschlag. Die Körnung der Schmelzwassersande nimmt mit zunehmender Entfernung von den Gletschertoren zunächst schnell, von Medianwerten über 1 mm auf Medianwerte um 0,4 mm in 10 km, dann langsam bis auf Medianwerte unter 0,2 mm in 30 km Entfernung ab. Sortierung und Symmetrie der Sande steigen entsprechend. Aus den Kornverteilungen lassen sich die Fließgeschwindigkeiten bei der Ablagerung ablesen. Sie sind geringer gewesen, als es die mächtigen und verbreiteten Akkumulationen erscheinen lassen. Bereits in 6 km Entfernung vom Eisrand flossen die Schmelzwässer als träge Bäche (0,3 m/sec) ab. In den Gletschertoren traten stoßweise extreme Fließgeschwindigkeiten auf, waren aber nur in geringem Maße am Gesamtaufbau der Sander beteiligt. Die Verbreitung der Würmsande paßt sich den Formen einer älteren Landschaft an. Sie läßt sich im behandelten Gebiet mit Hilfe der Schwermineralanalyse deutlich gegenüber den rißzeitlichen Ablagerungen abgrenzen, da die Verteilungen in den verschiedenaltrigen Sedimenten unterschiedlich sind. Vor Allem das Hornblende/Epidotverhältnis (Hornblendezahl nach STEINERT) ist ein gutes Kriterium. Da rißzeitliche Ablagerungen von den Schmelzwässern aufgearbeitet wurden, und zudem die Hornblenden im Laufe des Transportes stark abrollen, verwischen sich die Unterschiede in weiter Entfernung vom Eisrand. Schmelzwassersande der Würmvereisung sind vor Allem im Norden des Arbeitsgebietes weit nach Westen, bis an die nordfriesischen Inseln, geschüttet worden. Die Schmelzwässer benutzten als Durchlässe zu den Senken des Eemmeeres an der Westküste Täler in rißzeitlichen Hochgebieten. Die Wassermengen wurden hier gebündelt, sodaß sich auf den Eemablagerungen im Anschluß an die Durchlässe "Sekundärsander" ausbreiteten. Die Mächtigkeit der anstehenden Würm-Sandergebiete beträgt bis zu 20 m, meistens zwischen 10 und 15 m. An der Westküste sind die Schmelzwasserablagerungen von marinem Alluvium überdeckt. Teile der morphographisch als junge Sanderebenen erscheinenden Gebiete bestehen in Wirklichkeit aus rißzeitlichen, von jungen Schmelzwässern allenfalls oberflächlich umgearbeiteten Ablagerungen der älteren Vereisung. So ist der westliche und südwestliche Teil des Schleisanders schon während der Rißvereisung aufgeschüttet.
Resumo:
Mineralogical (microprobe) and geochemical (X-ray fluorescence, neutron activation analyses) data are given for 18 samples of volcanic rocks from the Guatemala Trench area (Deep Sea Drilling Project Leg 67). Typical fresh oceanic tholeiites occur in the trench itself (Hole 500) and in its immediate vicinity on the Cocos Plate (Site 495). Several samples (often reworked) of "spilitic" oceanic tholeiites are also described from the Trench: their mineralogy (greenschist facies association - actinolite + plagioclase + chlorite) and geochemistry (alteration, sometimes linked to manganese and zinc mineralization) are shown to result from high-temperature (300°-475°C) hydrothermal sea water-basalt interactions. The samples studied are depleted in light rare-earth elements (LREE), with the exception of the slightly LREE-enriched basalts from Hole 500. The occurrence of such different oceanic tholeiites in the same area is problematic. Volcanic rocks from the Guatemala continental slope (Hole 494A) are described as greenschist facies metabasites (actinolite + epidote + chlorite + plagioclase + calcite + quartz), mineralogically different from the spilites exposed on the Costa Rica coastal range (Nicoya Peninsula). Their primary magmatic affinity is uncertain: clinopyroxene and plagioclase compositions, together with titanium and other hygromagmaphile element contents, support an "active margin" affinity. The LREE-depleted patterns encountered in the present case, however, are not frequently found in orogenic samples but are typical of many oceanic tholeiites.
Resumo:
Seven sites were drilled during Leg 67 along a transect across the Middle America Trench off Guatemala: four (Sites 494, 496, 497, and 498) on continental slope, two (Sites 499 and 500) on Trench floor, and one (Site 495) on the Cocos Plate. We studied the mineralogy of sediments from Sites 494, 495, 496, 499, and 500. Our objective was to investigate the origin and source of separate minerals and mineral assemblages, giving special attention to the influence of the alteration of basalts on the sediment mineralogy, which we expected to be particularly important in layers just above oceanic basement.
Resumo:
The Los Negritos porphyry copper deposit is located ~ 4 km to the northeast of Carmen de Andacollo Mine in the Chilean Cretaceous metallogenic belt. The mineralization is hosted in andesite of the Quebrada Marquesa Formation and a series of at least four early to intramineral porphyry intrusive rock types: plagioclase quartz biotite porphyry (P1b and P1a dated at 109.60± 0.75 Ma and 107.22± 0.40 Ma); plagioclase biotite porphyry (P2: 106.30 ± 0.47 Ma); and quartz plagioclase biotite porphyry (P3: 106.19 ± 0.42 Ma). These units are cut by late‐ to post‐mineral plagioclase‐hornblende porphyritic rocks (P4b: 106.20 ± 0.69 Ma and P4a: 106.50 ± 0.68 Ma). The earliest intrusive units (P1) were affected by an initial stage of K‐feldspar‐biotite alteration, with chalcopyrite, molybdenite (date at 108.5 ± 0.5 Ma) and gold (up to 0.11 ppm), and the surrounding volcanic host rock was overprinted by chlorite‐epidote dominated (propylitic) alteration. Subsequent to the P2 and P3 intrusion, these rocks were affected by albite and then a second stage of potassic alteration. The Ti and Ba contents in hydrothermal biotite are notably lower (typically Ti = 0.100‐0.144 a.p.f.u. and Ba = 0.001‐0.005 a.p.f.u) than in magmatic ones (generally Ti = 0.186‐0.222 a.p.f.u. and Ba = 0.014‐0.023 a.p.f.u.), and constitute an excellent discriminant of the nature of biotite. These early stages of alteration were overprinted by copper‐molybdenum bearing chlorite‐sericite alteration at 106.60 ± 0.5 Ma (Re‐Os age in molybdenite) and by quartz‐sericite‐pyrite veins (phyllic), respectively in the southwest and northeast areas. The average temperature associated with these two alteration facies is estimated around 305 °C. Weak albite‐calcite alteration, spatially associated with sulfosalts and distributed along the margins of P3, overprinted the phyllic facies. The intrusive rock units at the Los Negritos and Carmen de Andacollo deposits are geochemically classified as diorite to granodiorite with a calc‐alkaline magmatic affinity, and formed in a volcanic arc setting from partial melting of a metasomatized mantle wedge. They are interpreted to be cogenetic, and related to a common long‐lived magma chamber that emplaced during a period of tectonic inversion known as the Subhercynian, Peruvian or Pacific event.
Resumo:
This article is a first summary of the heavy-mineral content of moraine and meltwater deposits of the Saalian glaciation in the Münsterland and its northeastern extension (NW Germany). In the beginning the appearance and distribution of both types of sediments are described (E. Speetzen), then the heavy mineral composition of selected outcrops is reported and the results are compared (D. Henningsen). Generally the predominant heavy minerals are garnet, minerals of the epidote group, zircon, and ordinary hornblende. The heavy mineral contents of moraine sediments sometimes are similar to that of meltwater deposits, in other cases they are different. Obviously there exists no relation between the heavy mineral composition and various advances of the Scandinavian ice sheet and their sediments, the content of heavy minerals rather depends on local influences.
Resumo:
A total of 117 samples of quarternary sediments, mostly sands, from a region NW of Hannover (Lower Saxony) has been investigated with regard to their content of heavy minerals. The absolute percentage of transparent heavy minerals approximates 0.2 Vol.%. If several samples of glaciofluvial sands (Drenthe-stage) or dune sands (Late Weichsel-stage to Holocene) are taken from one outcrop they show great similarities in their heavy minerals contents. Glaciofluvial sands of the Elster-stage evidently have less Garnet, Hornblende and minerals of volcanic origin (Augite, partly also Orthopyroxenes, Oxyhornblende and Olivine) than those of the Drenthe-stage, Weichsel-stage, and the Holocene. All these groups hold nearly the same average assemblages of heavy mineral, thus indicating that within the Drenthe-stage or later material from north and from south has been mixed and/or reworked. In the area investigated the proportions of heavy minerals do not help to identify either the stratigraphic position or the way of deposition of different sandy sediments younger than the Elster-stage. The distributional pattern of several heavy minerals point out that Kyanite, Hornblende and Epidote have been transported predominantly from the north, whereas Garnet and Staurolite have sources both in the north and the south. Tourmaline, Apatite and the minerals of volcanic origin mainly must be derived from the south. All results obtained in the region examined should not be transferred to other zones of the lowlands of Northern Germany automatically.
Resumo:
Dissertação (mestrado)—Universidade de Brasília, Instituto de Geociências, Pós-Graduação em Geologia, 2015.
Resumo:
The Kwoiek Area of British Columbia contains a pendant or screen of metamorphosed sedimentary and volcanic rocks almost entirely surrounded by a portion of the Coast Range Batholith, and intruded by several dozen stocks. The major metamorphic effects were produced by the quartz diorite batholithic rocks, with minor and later effects by the quartz diorite stocks. The sequence of important metamorphic reactions in the metasedimentary and metavolcanic rocks, ranging in grade from chlorite to sillimanite, is:
1. chlorite + carbonate + muscovite → epidote + biotite
2. chlorite + carbonate → actinolite + epidote
3. chlorite + muscovite → garnet + biotite
4. chlorite + epidote → garnet + hornblende
5. chlorite + muscovite → garnet + staurolite + biotite
6. chlorite + muscovite → aluminum silicate + biotite
7. muscovite + staurolite → garnet + aluminum silicate + biotite
8. staurolite → garnet + aluminum silicate
Continuous reactions, occurring between reactions 5 and 7, are:
A. chlorite + (high Ti) biotite + Al2O3 (from plagioclase?)→ garnet + staurolite + (low Ti) biotite + O2
B. muscovite (phengitic) → garnet + staurolite +muscovite (less phengitic) + O2 (?)
Detailed electron microprobe work on garnet, staurolite, biotite, and chlorite shows that:
(1) The garnet porphyroblasts are zoned according to a depletion model, called the Rayleigh depletion model, which assumes equilibrium between the edge of a growing garnet and the minerals which are unzoned, notably biotite, chlorite, and muscovite, but which assumes disequilibrium within the garnet.
(2) The staurolite porphyroblasts are also zoned, and from their zoning patterns reactions A, B, and 5 are documented. Progressive reduction of iron with increasing grade of metamorphism is also inferred from the staurolite zoning patterns.
(3) During a late period of falling temperature garnet continued to grow and the biotite and chlorite reequilibrated. The biotite, chlorite, and garnet edge compositions can vary from point to point in a given thin section, indicating that the volume of equilibrium at the final stage of metamorphism was only a few cubic microns.
(4) The horizon within the garnet that grew at maximum temperature can be identified. The Mg/Fe ratio of this horizon, if the garnet composition is a limiting composition in the Al2O3 - K2O - FeO - MgO tetrahedron, increases systematically with increasing metamorphic grade. Biotite and chlorite compositions also show a general increase in Mg/Fe ratio with increasing metamorphic grade, but staurolite appears to show the reverse effect.
(5) The Mg/Fe ratio at the maximum temperature horizon of the garnet porphyroblasts is a function of its Mn content as evidenced from the study of five garnet-bearing rocks, collected from one outcrop area, with the same assemblage but with differing proportions of minerals.
An important implication of zoned minerals is that the effective composition of a system in a phase lies on the join between the homogeneous minerals (if there are two) and not within three-or- four-phase fields when a zoned mineral, such as garnet or staurolite, is present in the assemblage.
Study of the three aluminum silicates found in the Kwoiek Area showed that a constant pressure change in polymorphs from andalusite to kyanite to sillimanite took place with increasing temperature. This transition series is best explained by the metastable formation of andalusite.
Photographic materials on pages 15, 121, 160, 162, and 164 are essential and will not reproduce clearly on Xerox copies. Photographic copies should be ordered.