963 resultados para di(2-ethylhexyl)phosphoric acid
Resumo:
Neste estudo, um protocolo para induzir maiores quantidades de calos friáveis de Boerhaavia paniculata RICH e uma técnica de lipidômica foram aplicados para investigar o perfil dos lipídios e serem comparados com aqueles presentes nas raízes desta planta, os quais apresentaram atividade anti-inflamatória no extrato hexânico bruto. A cultura de calo foi induzida a partir de sementes em meio sólido contendo sais de Murashige e Skoog com diferentes quantidades de glicose e diferentes concentrações de ácido 2,4-diclorofenoxiacético. Os frascos foram mantidos em câmara de germinação a 30 ± 2°C, com fotoperíodo de 16h sob intensidade luminosa de 27 µmol m–2 s–1 durante 4 semanas. Os melhores resultados para a formação de calo friável e desenvolvimento da biomassa foram obtidos no tratamento contendo 2,26 µM de 2,4-D e de glicose (1,5 %; m/v). Técnica de lipidômica foi aplicada na fração hexânica mostrando as concentrações mais elevadas de esteróides β-sitosterol (3,53 mg/100 g de cs - células seca ), e ácidos graxos; especialmente o ácido 2-hidroxi-tetracosanóico (0,34 mg/100 g cs), ácido eicosanoico (86,25 mg/100 g cs), ácido esteárico (420,83 mg/100 g cs), ácido tetradecanóico (10,74 mg/100 g cs) e ácido linoléico (100,61 mg/100 g cs). O perfil lipídico do calo versus aquele encontrado nas raízes da planta silvestre é descrito neste trabalho.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Os sucroésteres são empregados como surfactantes, tensoativos, substitutos de gordura e antibióticos. Este trabalho tem como objetivo sintetizar um novo sucroéster derivado do ácido picolínico (ácido 2-piridinocarboxílico), o picolinato de sacarose, e estudar sua atividade antibacteriana in vitrosobre a bactéria Gram-negativa patogênica Escherichia coli. A síntese do picolinato de sacarose foi processada a partir da transesterificação da sacarose com picolinato de metila em condição anidra à 80oC, utilizando dimetil sulfóxido (DMSO) como solvente e K2CO3 como catalisador. A separação dos isômeros formados foi realizada por HPLC no modo semipreparativo e cinco frações cromatográficas foram coletadas e aplicadas em testes de atividade antibacteriana, por disco-difusão em meio sólido, nas concentrações de 150; 300; 450; 600; 750 e 900 μg/mL. As frações 2, 4 e 6 foram ativas contra E.coli. e a fração 4 (900 μg/mL) foi a mais eficiente, sendo selecionada para testes em sinergia com EDTA nas concentrações de 250, 500 e 750 μg/mL, com melhor resultado quando empregado EDTA em 750 μg/mL. Neste caso, os discos apresentaram halos de inibição de crescimento igual ao da Tetraciclina (30 μg/mL) e superior aos produzidos pelos discos com Gentamicina (10 μg/mL). A fração 4 foi caracterizada por FTIR e espectrometria de massas (ESI-MS) e os resultados indicam que se trata sucroéster monossubstituído. Palavras-chave:Sucroquímica. Sucroéster. Sacarose. Picolinato de sacarose. Escherichia coli. Antibiograma por disco-difusão. ABSTRACT Study of antimicrobial activity of sucrose picolinate against Escherichia coli Sucrose esters are generally used as surfactants, fat substitutes and antibiotics. The aim of the present study was to synthesize new sucrose esters derived from picolinic acid (2-pyridine carboxylic acid) and study in vitro antimicrobial activity on the Gramnegative pathogenic bacterium Escherichia coli. The synthesis of sucrose picolinate was performed through the transesterification of sucrose with methyl picolinate under anhydrous conditions at 80 oC using dimethyl sulfoxide (DMSO) as the solvent and K2CO3as the catalyst. The separation of the formed isomers was performed by HPLC in a semi-preparative chromatograph system. Five fractions were collected and applied to a disc-diffusion antibiogram in solidmedium tests at concentrations of 150, 300, 450, 600, 750 and 900 μg/mL. Fractions 2, 4 and 6 were active against E. coli. Fraction 4 (900 μg/mL) was the most efficient and was selected for the determination of antimicrobial activity in synergistic tests with EDTA at concentrations of 250, 500 and 750 μg/mL. The best result was obtained with 750 μg/mL of EDTA. Fraction 4 was characterized as a monosubstituted sucrose ester by FTIR and mass spectrometry (ESI-MS). Keywords: Sucrochemistry. Sucrose. Chromium picolinate sucrose. Escherichia coli. Susceptibility testing by disk diffusion.
Resumo:
Pós-graduação em Química - IQ
Resumo:
Pós-graduação em Química - IQ
Resumo:
This study aimed to evaluate and characterize the chemical properties of soil organic matter under two periodically flooded forest formations on the island of Marambaia, Rio de Janeiro. These formations differ on the degree of soil water saturation, caused by the influence of water table, and in the (F1) formation presents the water table nearer the surface compared to the (F2) formation. Samples were collected in layers from 0.00 to 0.05, 0.05-0.10 and 0.10-0.20 m. The soil properties evaluated were: pH, H+ + Al+ 3, Ca+2, Mg+2, Na+, K+, P, N, total organic carbon (TOC) and base saturation (V%), humin carbon fraction (C-HUM), carbon of humic acid fraction (HAF-C) and fulvic acid fraction carbon (FAF-C). Statistically higher pH values were observed for F1. In F2 there are higher values of Mg+2, P, N and V% value. Correlation was found between the concentrations of Mg+2, N, humic acid and fulvic acid with water table in F1, and water table in F2 with Na+ and K+. Fraction C-HUM was more representative of the total organic carbon, followed by C-HAF and C-FAF. The TOC levels were higher in F1. The C /N ratio was lower in F2, with values ranging between 9 and 12, and F1 were found higher values of this relationship, ranging from 9 to 15. Among the pathways of formation of organic soils in both areas it appears that the major route for organic matter accumulation is the inheritance route.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Objective: This study evaluated the influence of different surface treatments on the resin bond strength/light-cured characterizing materials (LCCMs), using the intrinsic characterization technique. The intrinsic technique is characterized by the use of LCCMs between the increments of resin composite (resin/thin film of LCCM/external layer of resin covering the LCCM).Materials and Methods: Using a silicone matrix, 240 blocks of composite (Z350/3M ESPE) were fabricated. The surfaces received different surface treatments, totaling four groups (n=60): Group C (control group), no surface treatment was used; Group PA, 37% phosphoric acid for one minute and washing the surface for two minutes; Group RD, roughening with diamond tip; and Group AO, aluminum oxide. Each group was divided into four subgroups (n=15), according to the LCCMs used: Subgroup WT, White Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup BT, Black Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup WK, White Kolor Plus pigment (Kerr) LCCM; Subgroup BK, Brown Kolor Plus pigment (Kerr) LCCM. All materials were used according to the manufacturer's instructions. After this, block composites were fabricated over the LCCMs. Specimens were sectioned and submitted to microtensile testing to evaluate the bond strength at the interface. Data were submitted to two-way analysis of variance (ANOVA) (surface treatment and LCCMs) and Tukey tests.Results: ANOVA presented a value of p<0.05. The mean values (+/- SD) for the factor surface treatment were as follows: Group C, 30.05 MPa (+/- 5.88)a; Group PA, 23.46 MPa (+/- 5.45)b; Group RD, 21.39 MPa (+/- 6.36)b; Group AO, 15.05 MPa (+/- 4.57)c. Groups followed by the same letters do not present significant statistical differences. The control group presented significantly higher bond strength values than the other groups. The group that received surface treatment with aluminum oxide presented significantly lower bond strength values than the other groups.Conclusion: Surface treatments of composite with phosphoric acid, diamond tip, and aluminum oxide significantly diminished the bond strength between composite and the LCCMs.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Engenharia Mecânica - FEG