Determination of the gluon polarisation from open charm production at COMPASS

One of the main goals of the COMPASS experiment at CERN is the determination of the gluon polarisation in the nucleon. It is determined from spin asymmetries in the scattering of 160 GeV/c polarised muons on a polarised LiD target. The gluon polarisation is accessed by the selection of photon-gluon fusion (PGF) events. The PGF-process can be tagged through hadrons with high transverse momenta or through charmed hadrons in the final state. The advantage of the open charm channel is that, in leading order, the PGF-process is the only process for charm production, thus no physical background contributes to the selected data sample. This thesis presents a measurement of the gluon polarisation from the COMPASS data taken in the years 2002-2004. In the analysis, charm production is tagged through a reconstructed D0-meson decaying in $D^{0}-> K^{-}pi^{+}$ (and charge conjugates). The reconstruction is done on a combinatorial basis. The background of wrong track pairs is reduced using kinematic cuts to the reconstructed D0-candidate and the information on particle identification from the Ring Imaging Cerenkov counter. In addition, the event sample is separated into D0-candidates, where a soft pion from the decay of the D*-meson to a D0-meson, is found, and the D0-candidates without this tag. Due to the small mass difference between D*-meson and D0-meson the signal purity of the D*-tagged sample is about 7 times higher than in the untagged sample. The gluon polarisation is measured from the event asymmetries for the for the different spin configurations of the COMPASS target. To improve the statistical precision of the final results, the events in the final sample are weighted. This method results in an average value of the gluon polarisation in the x-range covered by the data. For the COMPASS data from 2002-2004, the resulting value of the gluon polarisation is $<Delta g/g>=-0.47+-0.44 (stat)+-0.15(syst.)$. The result is statistically compatible with the existing measurements of $<Delta g/g>$ in the high-pT channel. Compared to these, the open charm measurement has the advantage of a considerably smaller model dependence.

Implementazione di un modulatore sigma-delta digitale per la sintesi di segnali pwm ad alta fedelta.

La modulazione a durata d'impulso (PWM) è utilizzata soprattutto perchè permette di ottenere alta efficenza energetica. In ambito accademico è stato proposto un modulatore PWM che sfrutta la tecnica di noise shaping, Sigma Delta, per avere elevata fedeltà. Il lavoro di questa tesi è stato l'implementazione su FPGA del modulatore Sigma DeltaDigitale utilizzato: quarto ordine, con quantizzatore a 4 bit e SNR in banda di 60 dB. Il dimensionamento è stato fatto determinando l'effetto che la lunghezza delle parole dei segnali ha sul rumore prodotto dal sistema. Questo studio è stato svolto con analisi euristiche ed algoritmi di ricerca implementati in ambiente MATLAB. Lo studio fatto è di carattere generale ed estendibile a generiche architetture Sigma Delta.

A universal delta model

This thesis presents a universal model of documents and deltas. This model formalize what it means to find differences between documents and to shows a single shared formalization that can be used by any algorithm to describe the differences found between any kind of comparable documents. The main scientific contribution of this thesis is a universal delta model that can be used to represent the changes found by an algorithm. The main part of this model are the formal definition of changes (the pieces of information that records that something has changed), operations (the definitions of the kind of change that happened) and deltas (coherent summaries of what has changed between two documents). The fundamental mechanism tha makes the universal delta model a very expressive tool is the use of encapsulation relations between changes. In the universal delta model, changes are not always simple records of what has changed, they can also be combined into more complex changes that reflects the detection of more meaningful modifications. In addition to the main entities (i.e., changes, operations and deltas), the model describes and defines also documents and the concept of equivalence between documents. As a corollary to the model, there is also an extensible catalog of possible operations that algorithms can detect, used to create a common library of operations, and an UML serialization of the model, useful as a reference when implementing APIs that deal with deltas. The universal delta model presented in this thesis acts as the formal groundwork upon which algorithm can be based and libraries can be implemented. It removes the need to recreate a new delta model and terminology whenever a new algorithm is devised. It also alleviates the problems that toolmakers have when adapting their software to new diff algorithms.

Vector meson photoproduction in ultra-peripheral heavy ion collisions with ALICE at the LHC

Ultra-relativistic heavy ions generate strong electromagnetic fields which offer the possibility to study γ-γ and γ-nucleus processes at the LHC in the so called ultra-peripheral collisions (UPC). The photoproduction of J/ψ vector mesons in UPC is sensitive to the gluon distribution of the interacting nuclei. In this thesis the study of coherent and incoherent J/ψ production in Pb-Pb collisions at √sNN = 2.76 TeV is described. The J/ψ has been measured via its leptonic decay in the rapidity range -0.9 < y < 0.9. The cross section for coherent and incoherent J/ψ are given. The results are compared to theoretical models for J/ψ production and the coherent cross section is found to be in good agreement with those models which include nuclear gluon shadowing consistent with EPS09 parametrization. In addition the cross section for the process γ γ→ e+e− has been measured and found to be in agreement with the STARLIGHT Monte Carlo predictions. The analysis has been published by the ALICE Collaboration in the European Physical Journal C, with one of its main plot depicted on the cover-front of the November 2013 issue.

Search for time-integrated cp violation in $d^0 \rightarrow k^+k^-$ and $d^0 \rightarrow \pi^+\pi^-$ decays at lhcb.

The LHCb experiment at the LHC, by exploiting the high production cross section for $c\overline{c}$ quark pairs, offers the possibility to investigate $\mathcal{CP}$ violation in the charm sector with a very high precision.\\ In this thesis a measurement of time-integrated \(\mathcal{CP}\) violation using $D^0\rightarrow~K^+K^-$ and $D^0\rightarrow \pi^+\pi^-$ decays at LHCb is presented. The measured quantity is the difference ($\Delta$) of \(\mathcal{CP}\) asymmetry ($\mathcal{A}_{\mathcal{CP}}$) between the decay rates of $D^0$ and $\overline{D}^0$ mesons into $K^+K^–$ and $\pi^+\pi^-$ pairs.\\ The analysis is performed on 2011 data, collected at \(\sqrt{s}=7\) TeV and corresponding to an integrated luminosity of 1 fb\(^{-1}\), and 2012 data, collected at \(\sqrt{s}=8\) TeV and corresponding to an integrated luminosity of 2 fb\(^{-1}\).\\ A complete study of systematic uncertainties is beyond the aim of this thesis. However the most important systematic of the previous analysis has been studied. We find that this systematic uncertainty was due to a statistical fluctuation and then we demonstrate that it is no longer necessary to take into account.\\ By combining the 2011 and 2012 results, the final statistical precision is 0.08\%. When this analysis will be completed and published, this will be the most precise single measurement in the search for $\mathcal{CP}$ violation in the charm sector.

High mobility rates during the period of the "Celtic migrations"? - 87 Sr, 86 Sr and delta 18 O evidence from Early La Tène Europe

Although the period of the historic “Celtic migrations” is archaeologically extensively studied, the long-lasting question whether mass migration or increased individual mobility caused the expansion of the La Tène culture throughout continental Europe persist. Strontium (Sr) and in part oxygen (O) isotope analysis of human remains from the early La Tène cemeteries of Nebringen (Germany), Münsingen-Rain (Switzerland), Monte Bibele (Italy) and the Czech cemeteries of Radovesice I, Radovesice II and Kutná Hora was, therefore, carried out to investigate the importance of residential changes during this time period. These isotope analyses showed that most analysed individuals either came from the area they were buried in or from the surrounding area of the cemetery. An exception was formed by the Czech cemeteries, where almost a quarter of the studied individuals appeared non-local. Together with Nebringen, these cemeteries also had the most varied Sr isotope ratios, which suggest highly mobile communities in which individuals regularly changed their residency. The isotopic ratios of the cemeteries of Münsingen-Rain and Monte Bibele appeared far less varied. In part, these differences might be explained by the community structures of these cemeteries. Morphological kinship analysis in Münsingen-Rain demonstrated biological relatedness among most of the analysed individuals. These related individuals also shared similar isotope signatures, which suggest an origin from the surrounding Aar Valley. In the vicinity of the cemetery of Monte Bibele, an associated settlement site was discovered. The deceased presumably not only shared this settlement, but also cultivated the same land plots. Dispersed settlement structures were suggested for Nebringen, Radovesice and Kutná Hora, as these agriculturally favourable landscapes were densely populated during prehistoric times. Connected to these community structures are the prevailing geological conditions in these areas. Both Münsingen-Rain and Monte Bibele are located in a region where homogeneous geological conditions prevail, whereas the landscapes of Nebringen, Radovesice and Kutná Hora are characterised by complex heterogeneous geological conditions. As the majority of individuals in Nebringen and the Czech cemeteries correspond to the expected isotope values for the studied areas, regularly changing land plots might have contributed to the observed variation. Although mass migration as depicted by the historical sources was not observed individual mobility of a small part of these studied communities certainly played a role. Males appeared, thereby, to have slightly more often a non-local birthplace or moved during childhood. Male mobility was, however, not always associated with burial as a warrior. Females, on the other hand, originated more often from the region. Patrilocal residential patterns, with the exception of the Czech cemeteries, were nevertheless not observed. Objects and ideas also seem to have been exchanged freely, as there are no indications that individuals with particular grave goods came from specific areas. It rather appears that the individuals buried with them were either local or had different places of origin. This can be explained by the fact that the exact origin of grave goods is difficult to establish and the occurrence of similar 87Sr/86Sr values in different areas. This study provided important new insights on the period of the “Celtic migrations” and the way of life of these prehistoric people.

Exclusive vector meson production in pp collisions at the COMPASS experiment

Produktionsmechanismen für Teilchenproduktion im mittleren Energiebereich wurden in Proton-Proton Kollisionen innerhalb der COMPASS-Kollaboration mit Hilfe des COMPASS-Spektrometers am SPS Beschleuniger am CERN untersucht. Die verschiedenen Produktionsmechanismen werden mittels Produktion der Vektormesonen omega und phi studiert und können die diffraktive Anregung des Strahlteilchens mit anschliessendem Zerfall der Resonanz, zentrale Produktion und den damit verwandten “Shake-off” Mechanismus enthalten. Die für diese Arbeit verwendeten Daten wurden in den Jahren 2008 und 2009 mit 190 GeV/c-Protonen aufgenommen, die auf ein Flüssigwasserstofftarget trafen. Das Target war von einem Rückstoßprotonendetektor umgeben, der ein integraler Bestandteil des neuentwickelten Hadrontriggersystems ist. Für dieses System wurden außerdem einige neue Detektoren gebaut. Die Leistungsfähigkeit des Rückstoßprotonendetektors und des Triggersystems wird untersucht und Effizienzen extrahiert. Außerdem wird sowohl eine Methode zur Rekonstruktion von Rückstoßprotonen als auch eine Methode zur Kalibration des Rückstoßprotonendetektors entwickelt und beschrieben. Die Produktion von omega-Mesonen wurde in der Reaktion pp -> p omega p, omega -> pi+pi-pi0 und die Produktion von phi-Mesonen in der Reaktion pp -> p phi p, phi -> K+K- bei einem Impulsübertrag zwischen 0.1 (GeV/c)^2 und 1 (GeV/c)^2 gemessen. Das Produktionsverhältnis s(pp -> p phi p)/s(pp -> p omega p) wird als Funktion des longitudinalen Impulsanteils xF bestimmt und mit der Vorhersage durch die Zweigregel verglichen. Es ergibt sich eine signifikante Verletzung der Zweigregel, die abhängig von xF ist. Die Verletzung wird in Verbindung zu resonanten Strukturen im pomega-Massenspektrum diskutiert. Die xF-Abhängigkeit verschwindet, wenn man die Region niedriger pomega- und pphi-Masse entfernt, die solche resonanten Strukturen aufweist. Zusätzlich wird die Spinausrichtung bzw. das Spindichtematrixelement rho00 für omega- und phi-Mesonen untersucht. Die Spinausrichtung wird im Helizitätssystemrnanalysiert, welches für eine Abgrenzung von resonanten, diffraktiven Anregungen geeignet ist. Außerdem wird die Spinausrichtung in einem Referenzsystem mit Bezug auf die Richtung des Impulsübertrags untersucht, mit dessen Hilfe zentrale Prozesse wie zentrale Produktion oder “shake-off” abgegrenzt werden. Auch hier wird eine Abhängigkeit von xF und der invarianten Masse des pomega-Systems beobachtet. Diese Abhängigkeit kann wieder auf die resonanten Strukturen in der Produktion von omega-Mesonen zurückgeführt werden. Die Ergebnisse werden abschließend im Hinblick auf die verschiedenen Produktionsmechanismen diskutiert.

Studio morfo-batimetrico dei canali distributori del delta del Po di Pila

In questa tesi sono state analizzate, a partire da dati batimetrici ad alta risoluzione ottenuti tramite tecnologia multibeam, le morfologie caratteristiche dei tre canali tributari del Delta del Po di Pila: Busa di Dritta, Busa di Tramontana, Busa di Scirocco. Lo studio è stato effettuato col software Global Mapper, che ha permesso la mappatura e l’analisi morfometrica dei principali elementi morfologici osservati, ovvero aree depresse, zone con presenza di forme di fondo, zone a fondo piano e depositi da instabilità gravitativa sulle sponde dei canali. La loro distribuzione nei vari tratti dei canali è stata messa in relazione alle caratteristiche morfologiche e idrauliche del tratto fluviale e ai processi erosivi e deposizionali che interessano i tre canali ad intensità variabile, nell’ambito dell’evoluzione molto recente di questa porzione del delta. I risultati di questo studio indicano come l’utilizzo in ambito fluviale delle più recenti tecniche di acquisizione dei dati batimetrici multibeam possa costituire la base per un dettagliato studio delle morfologie fluviali e delle dinamiche ad esse associate.

Kaon and D meson masses with N_f = 2+1+1 twisted mass lattice QCD

We discuss the computation of the kaon and D meson masses in the N_f = 2+1+1 twisted mass lattice QCD setup, where explicit heavy flavor and parity breaking occurs at finite lattice spacing. We present three methods suitable in this context and verify their consistency.