An Evaluation of Carbon Concentrations Associted with Biodiesel Particulate Matter in an Underground Metal Mine

Exposure to diesel particulate matter from diesel exhaust has been shown to have adverse health effects in humans. In 2012 The International Agency for Research on Cancer classified diesel exhaust as a group 1 know human carcinogen. Because of the associated health effects, there has been a strong push to reduce the amount of diesel exhaust present in the mining industry. Biodiesel is one to the more common and promising control options used to reduce the amount of diesel particulate matter that is generated during fuel combustion. The use of biodiesel over petroleum diesel has been shown to reduce not only particulate matter, but hydro carbon and carbon monoxide mass emissions as well. Personal and area samples were collected at an underground metal mine in the northwestern United States to evaluate the current blend of B70 biodiesel. The objective of this research was to evaluate the carbon levels associated with diesel particulate matter generated from the combustion of a B70 biodiesel. Data was also compared to past studies on which diesel particulate matter from petroleum diesel was evaluated. Samples were taken on four separate four day campaigns between March and October of 2014. Area samples were taken from 7 different areas in the mine and personal samples were taken from a 20 person cohort. The equipment used for sampling was compliant with the NIOSH 5040 method. Statistical analysis of the results was done using Minitab 17 software. The statistical analysis showed that the total carbon concentrations from biodiesel were well below the MSHA exposure limit. Results also showed that organic/elemental carbon ratios were consistent with past studies as the concentrations of organic carbon were significantly higher than those of elemental carbon.

Sustainable Energy Production in the United States: Life Cycle Assessment of Biofuels and Bioenergy

The United States of America is making great efforts to transform the renewable and abundant biomass resources into cost-competitive, high-performance biofuels, bioproducts, and biopower. This is the key to increase domestic production of transportation fuels and renewable energy, and reduce greenhouse gas and other pollutant emissions. This dissertation focuses specifically on assessing the life cycle environmental impacts of biofuels and bioenergy produced from renewable feedstocks, such as lignocellulosic biomass, renewable oils and fats. The first part of the dissertation presents the life cycle greenhouse gas (GHG) emissions and energy demands of renewable diesel (RD) and hydroprocessed jet fuels (HRJ). The feedstocks include soybean, camelina, field pennycress, jatropha, algae, tallow and etc. Results show that RD and HRJ produced from these feedstocks reduce GHG emissions by over 50% compared to comparably performing petroleum fuels. Fossil energy requirements are also significantly reduced. The second part of this dissertation discusses the life cycle GHG emissions, energy demands and other environmental aspects of pyrolysis oil as well as pyrolysis oil derived biofuels and bioenergy. The feedstocks include waste materials such as sawmill residues, logging residues, sugarcane bagasse and corn stover, and short rotation forestry feedstocks such as hybrid poplar and willow. These LCA results show that as much as 98% GHG emission savings is possible relative to a petroleum heavy fuel oil. Life cycle GHG savings of 77 to 99% were estimated for power generation from pyrolysis oil combustion relative to fossil fuels combustion for electricity, depending on the biomass feedstock and combustion technologies used. Transportation fuels hydroprocessed from pyrolysis oil show over 60% of GHG reductions compared to petroleum gasoline and diesel. The energy required to produce pyrolysis oil and pyrolysis oil derived biofuels and bioelectricity are mainly from renewable biomass, as opposed to fossil energy. Other environmental benefits include human health, ecosystem quality and fossil resources. The third part of the dissertation addresses the direct land use change (dLUC) impact of forest based biofuels and bioenergy. An intensive harvest of aspen in Michigan is investigated to understand the GHG mitigation with biofuels and bioenergy production. The study shows that the intensive harvest of aspen in MI compared to business as usual (BAU) harvesting can produce 18.5 billion gallons of ethanol to blend with gasoline for the transport sector over the next 250 years, or 32.2 billion gallons of bio-oil by the fast pyrolysis process, which can be combusted to generate electricity or upgraded to gasoline and diesel. Intensive harvesting of these forests can result in carbon loss initially in the aspen forest, but eventually accumulates more carbon in the ecosystem, which translates to a CO2 credit from the dLUC impact. Time required for the forest-based biofuels to reach carbon neutrality is approximately 60 years. The last part of the dissertation describes the use of depolymerization model as a tool to understand the kinetic behavior of hemicellulose hydrolysis under dilute acid conditions. Experiments are carried out to measure the concentrations of xylose and xylooligomers during dilute acid hydrolysis of aspen. The experiment data are used to fine tune the parameters of the depolymerization model. The results show that the depolymerization model successfully predicts the xylose monomer profile in the reaction, however, it overestimates the concentrations of xylooligomers.

International flavours

It is an Olympic year and we have just witnessed the fantastic games hosted by Rio de Janeiro. Well done to team USA for winning the most medals overall but also well done to so many other nations and individuals who performed so well or were ambassadors in other ways. Teenage swimmer Yusra Mardini who swam for the refugee team and South Africa's Wayde van Niekerk who broke the longstanding 400 m record of Michael Johnson that has stood since 1999. Of course, we must mention sprinter Usain Bolt and swimmer Michael Phelps, who have now transcended superstar status and entered a new level of icon. My personal highlight was the sportsmanship witnessed in the 5000 m when American Abbey D’Agostino was accidentally felled by New Zealand runner Nikki Hamblin. D’Agostino helped Hamblin back to her feet but slumped to the track after realising her own injury. Hamblin helped her up and stayed with her so that both completed the race. The International Olympic Committee has awarded both with the prestigious Pierre de Coubertin award, also known as the International Fair Play Trophy. Fair play is of paramount importance in publishing in peer-reviewed papers. At CLAE we try and maintain, as do other journals, this by ensuring double blind peer review and allowing authors to select the most appropriate handling editor for their submission. Our handling editors are placed across the world (2 in Europe, 1 in the Americas, 1 in Australia and 1 in Asia) and part of their role is to encourage submissions from their region. Over the last decade we certainly have seen more and more papers from places that haven’t previously published in CLAE. In this issue of CLAE we have a true international blend of papers. We have papers from authors from the UK, USA, Iran, Jordan, France, Poland, Turkey, Nigeria, France, Spain and Brazil. I think it's a testament to the continued success of the journal that we are attracting new writers from so many parts of the world and retain papers from more established authors and research centres. We do continue to attract many weaker papers that are rejected early in the review process. Often these will be unexceptional case reports or papers describing a surgical technique. Case reports are published but only those that offer something original and especially those with interesting photographs. In this issue you will see Professor James Wolffsohn (UK) has an interesting paper around a lot of the focus of his recent research activity into clinical evaluation of methods of correcting presbyopia. In this paper he highlights predictors to aid success of presbyopic contact lenses. If you have been involved in any clinical work or research in the field of dry eye disease then you will know well the CLDEQ (Contact Lens Dry Eye Questionnaire) devised by Robin Chalmers and her colleagues (USA). This issue of CLAE details the latest research using the CLDEQ-8 (the 8 item version of the CLDEQ). The Shahroud Eye Cohort Study has produced many papers already and in this issue we see Fotouhi Akbar (Iran) looking at changes in central and peripheral corneal thickness over a five year period. These days we use a lot of new instrumentation, such as optical low-coherence reflectometry. In this issue Emre Güler (Turkey) compares that to a new optical biometry unit. Dry eye is more common and in this issue we see a study by Oluyemi Fasina (Nigeria) to investigate the disease in adults in South-West Nigeria. The TearLab™ is now commonly used to investigate osmolarity and Dorota Szczesna-Iskander (Poland) looks at measurement variability of this device. Following the theme of dry eyes and tear testing Renaud Laballe (France) looks at the use of scleral lenses as a reservoir-based ocular therapeutic system. In this issue we have a couple of papers looking at different aspects of keratoconus. Magdalena Popiela (UK) looks at demographics of older keratoconic patients in Wales, Faik Orucoglu (Turkey) reports a novel scoring system for distinguishing keratoconus from normal eyes, Gonzalo Carracedo (Spain) reports the effect of rigid gas permeable lens wear on dry eye in keratoconus and Hatice Nur Colak (Turkey) compares topographic and aberrations in keratoconus. Other interesting papers you will find are Mera Haddad (Jordan) investigates contact lens prescribing in Jordan, Camilla Fraga Amaral (Brazil) offers a report on the use of ocular prosthetics, Naveed Ahmed Khan (Malaysia) reports of the use of dimethyl sulfoxide in contact lens disinfectant and Michael Killpartrick (UK) offers a short piece with some useful advice on contamination risk factors that may occur from the posterior surface of disposable lenses. So for this issue I would say that the Gold Medal for biggest contribution in terms of papers has to go to Turkey. I could have awarded it to the UK too, but Turkey has three full papers and the UK has two plus one short communication. Turkey is also one of the countries that has shown the largest increase in submissions over the last decade. Finally, welcome aboard to our newest Editorial Board Member Nicole Carnt from Australia. Nicole has been an active researcher for many years and acted as a reviewer for CLAE many times in the past. We look forward to working with you.

Public health implications of dietary fiber intake to reduce the cost of chronic diseases

Objective: To assess the epidemiological evidence on dietary fiber intake and chronic diseases and make public health recommendations for the population in Romania based on their consumption. Populations that consume more dietary fiber from cereals, fruits and vegetables have less chronic disease. Dietary Reference Intakes recommend consumption of 14 g dietary fiber per 1,000 kcal, or 25 g for adult women and 38 g for adult men, based on epidemiologic studies showing protection against cardiovascular disease, stroke, hypertension, diabetes, obesity, metabolic syndrome, gastrointestinal disorders, colorectal -, breast -, gastric -, endometrial -, ovarian - and prostate cancer. Furthermore, increased consumption of dietary fiber improves serum lipid concentrations, lowers blood pressure, blood glucose leads to low glycemic index, aids in weight loss, improve immune function, reduce inflammatory marker levels, reduce indicators of inflammation. Dietary fibers contain an unique blend of bioactive components including resistant starches, vitamins, minerals, phytochemicals and antioxidants. Dietary fiber components have important physiological effects on glucose, lipid, protein metabolism and mineral bioavailability needed to prevent chronic diseases. Materials and methods: Data regarding diet was collected based on questionnaires. We used mathematical formulas to calculate the mean dietary fiber intake of Romanian adult population and compared the results with international public health recommendations. Results: Based on the intakes of vegetables, fruits and whole cereals we calculated the Mean Dietary Fiber Intake/day/person (MDFI). Our research shows that the national average MDFI was 9.8 g fiber/day/person, meaning 38% of Dietary Requirements, and the rest of 62% representing a “fiber gap” that we have to take into account. This deficiency predisposes to chronic diseases. Conclusions and recommendations:The poor control of relationship between dietary fiber intake and chronic diseases is a major issue that can result in adverse clinical and economic outcomes. The population in Romania is at risk to develop such diseases due to the deficient fiber consumption. A model of chronic diseases costs is needed to aid attempts to reduce them while permitting optimal management of the chronic diseases. This paper presents a discussion of the burden of chronical disease and its socio-economic implications and proposes a model to predict the costs reduction by adequate intake of dietary fiber.

Effects of plasticizing and crosslinking on the mechanical and barrier properties of coatings based on blends of starch and poly(vinyl alcohol)

In the last decades, intensive research has been carried out in order to replace oil-based polymers with bio-based polymers due to growing environmental concerns. So far, most of the barrier materials used in food packaging are petroleum-based materials. The purpose of the barrier is to protect the packaged food from oxygen, water vapour, water and fat. The mechanical and barrier properties of coatings based on starch-plasticizer and starch-poly(vinyl alcohol) (PVOH)-plasticizer blends have been studied in the work described in this thesis. The plasticizers used were glycerol, polyethylene glycol and citric acid. In a second step, polyethylene coatings were extruded onto paperboard pre-coated with a starch-PVOH-plasticizer blend. The addition of PVOH to the starch increased the flexibility of the film. Curing of the film led to a decrease in flexibility and an increase in tensile strength. The flexibility of the starch-PVOH films was increased more when glycerol or polyethylene glycol was added than citric acid. The storage modulus of the starch-PVOH films containing citric acid increased substantially at high temperature. It was seen that the addition of polyethylene glycol or citric acid to the starch-PVOH blend resulted in an enrichment of PVOH at the surface of the films. Tensile tests on the films indicated that citric acid acted as a compatibilizer and increased the compatibility of the starch and PVOH in the blend. The addition of citric acid to the coating recipe substantially decreased the water vapour transmission rate through the starch-PVOH coated paperboard, which indicated that citric acid acts as a cross-linker for starch and/or PVOH. The starch-PVOH coatings containing citric acid showed oxygen-barrier properties similar to those of pure PVOH or of a starch-PVOH blend without plasticizer when four coating layers were applied on a paperboard. The oxygen-barrier properties of coatings based on a starch-PVOH blend containing citric acid indicated a cross-linking and increase in compatibility of the starch-PVOH blends. Polyethylene extrusion coating on a pre-coated paperboard resulted in a clear reduction in the oxygen transmission rate for all the pre-coating formulations containing plasticizers. The addition of a plasticizer to the pre-coating reduced the adhesion of polyethylene to pre-coated board. Polyethylene extrusion coating gave a board with a lower oxygen transmission rate when the paperboard was pre-coated with a polyethylene-glycol-containing formulation than with a citric-acid-containing formulation. The addition of polyethylene glycol to pre-coatings indicated an increase in wetting of the pre-coated paperboard by the polyethylene melt, and this may have sealed the small defects in the pre-coating leading to low oxygen transmission rate. The increase in brittleness of starch-PVOH films containing citric acid at a high temperature seemed to have a dominating effect on the barrier properties developed by the extrusion coating process. 

Le journalisme informatique au Québec : Expansion du journalisme ou nouveau territoire professionnel?

Le journalisme informatique est une pratique émergente qui consiste en l’emploi de méthodes et d’outils empruntés au domaine de l’informatique dans la cueillette, le traitement, l’analyse ou la présentation en ligne de l’information, dans le respect des valeurs fondamentales du journalisme (Diakopoulos, 2010). Cette recherche caractérise le journalisme informatique tel qu’il se pratique au Québec en 2015 au moyen d’une série d’entrevues semi-dirigées avec 30 participants : des praticiens, bien sûr, mais aussi des responsables des principales entreprises de presse où le journalisme informatique est pratiqué ou a été pratiqué, ainsi que des professionnels de l’informatique afin d’avoir un point de vue extérieur. Elle met notamment en relief deux attitudes à l’égard de cette pratique, attitudes qui s’expriment par un travail-frontière. Il y a, d’une part, les tenants d’une ségrégation entre le journalisme et l’informatique, et, d’autre part, les partisans d’une hybridation entre les deux disciplines. Pour ces derniers, le journalisme informatique occupe un territoire professionnel distinct, à la frontière du journalisme et de l’informatique. Cette recherche décrit de façon détaillée les motivations, les compétences et les activités des journalistes informatiques québécois et fait valoir qu’ils participent à une certaine « re-professionnalisation » du journalisme. Mots-clés : journalisme; informatique; technologie; journalisme informatique; journalisme de données; datajournalisme; journalisme assisté par ordinateur; professionnalisme; identité professionnelle; compétences professionnelles; travail-frontière; innovation en journalisme; Canada; Québec

Synthesis of novel organic semiconductors for optoelectronic devices

This thesis describes the synthesis and characterisation of novel conjugated organic materials with optoelectronic application. The first chapter provides an introduction about organic semiconductors and in particular about their working principle from a physical and chemical point of view. An overview of the most common types of solar cells is provided, including examples of some of the best performing materials. The second chapter describes the synthesis of a new library of flavin derivatives as potential active materials for optoelectronic applications. Flavins are natural redox-active molecules, which show potential application in optoelectronics, thanks to their stability and versatility. FPF-Flavins, for instance, could be used either as acceptor units in push-pull polyconjugated systems or as acceptor unit in dyes for DSSCs. In the same chapter a first attempt of synthesising bis-flavins to be used as N-type semiconductors in BHJ devices is described. The third chapter describes the successful synthesis and characterization of a series of conjugated organic molecules based on the benzothiadiazole moiety. Among these, three molecules containing ferrocene as donor unit were tested as sensitizers for DSSCs, reporting a PCE of 0.3% as the best result. Further studies indicated a significant problem of charge recombination which limits the performance. A near-infrared absorbing push-pull polymer, based on BbT as acceptor unit, was also synthesised and tested in BHJ devices as P-type semiconductor in blend with PC71BM, showing a VOC of 0.71 V. Finally, the last chapter describes the synthesis of several tetrathiafulvalene derivatives in order to explore this moiety as donor unit in dyes for DSSCs and as HTM for perovskite-based solar cells. In particular, two very simple dyes were synthesised and implemented in DSSCs reporting a PCE 0.2% and 0.4%, respectively. The low efficiency was associated to the tendency to aggregate at the solid state, with the absorption shifting from the visible to the infrared range. A conjugated molecule, containing a DPP core, was also synthesised and tested as HTM for perovskite solar cells. The best reported PCE of 7.7% was obtained without any additives. A case study about dehalogenation and “halogen dance” in TTF iodide is also presented.

Las dos caras de la organización del mundial FIFA Brasil 2014: Entre la proyección internacional y las denuncias sociales

El orgullo brasileño estalló en el año 2007, cuando Brasil fue elegido sede del mundial FIFA 2014. Esto se debe a que Brasil en ese momento gozaba de un creciente prestigio internacional por cuenta de su condición de Potencia Emergente, miembro de los BRICS, aspirante a un puesto permanente en el Consejo de Seguridad y contar con la selección de fútbol más exitosa de la historia. No obstante, en su afán por incrementar su visibilidad y proyección internacional acudió al ejercicio del Poder Blando, a través de la Diplomacia Cultural, concretamente se decidió por la Organización de Mega Eventos deportivos, al tiempo que debía enfrentar varios problemas en el ámbito interno (desigualdad, corrupción, pobreza). Así, esta estrategia de aplicación del Poder Blando resultó de cierta manera contraproducente, debido a que la política exterior y su éxito no suele estar disociada de la realidad interna.

Development and optimization of techniques and design parameters for the engineering of atmospheric pressure plasma devices for biomedical applications and plasma medicine

In the last decades, the possibility to generate plasma at atmospheric pressure gave rise to a new emerging field called plasma medicine; it deals with the application of cold atmospheric pressure plasmas (CAPs) or plasma-activated solutions on or in the human body for therapeutic effects. Thanks to a blend of synergic biologically active agents and biocompatible temperatures, different CAP sources were successfully employed in many different biomedical applications such as dentistry, dermatology, wound healing, cancer treatment, blood coagulation, etc.… Despite their effectiveness has been verified in the above-mentioned biomedical applications, over the years, researchers throughout the world described numerous CAP sources which are still laboratory devices not optimized for the specific application. In this perspective, the aim of this dissertation was the development and the optimization of techniques and design parameters for the engineering of CAP sources for different biomedical applications and plasma medicine among which cancer treatment, dentistry and bioaerosol decontamination. In the first section, the discharge electrical parameters, the behavior of the plasma streamers and the liquid and the gas phase chemistry of a multiwire device for the treatment of liquids were performed. Moreover, two different plasma-activated liquids were used for the treatment of Epithelial Ovarian Cancer cells and fibroblasts to assess their selectivity. In the second section, in accordance with the most important standard regulations for medical devices, were reported the realization steps of a Plasma Gun device easy to handle and expected to be mounted on a tabletop device that could be used for dental clinical applications. In the third section, in relation to the current COVID-19 pandemic, were reported the first steps for the design, realization, and optimization of a dielectric barrier discharge source suitable for the treatment of different types of bioaerosol.

Synthesis, Modification and Characterization of Polymeric Membranes for CO2 Separation

This doctorate focused on the development of dense polymeric membranes for carbon capture, mostly in post combustion applications, and for natural gas sweetening. The work was supported by the European Project NANOMEMC2 funded under H2020 program. Different materials have been investigated, that rely on two main transport mechanisms: the solution-diffusion and the facilitated transport. In both cases, proper nano-fillers have been added to the matrix, in order to boost the mechanical and permselective properties of the membranes. Facilitated transport membranes were based on the use of was polyvinylamine (PVAm), as main matrix with fixed-site carriers, and L-Arginine as mobile carrier; the filler, used mostly as reinforcer, was carboxymethylated nanocellulose (cNFC). Humid test showed interesting results, and especially the blend made of PVAm/cNFC/Arg in weight ratio 27,5/27,5/45 crossed the Robeson CO2/N2 upper bound, representing current state of the art membranes, with a CO2 permeability of 271 Barrer and CO2/N2 selectivity of 70. Solution diffusion membranes were based on Pebax®2533 matrix which was added with three different graphene oxide (GO)-based materials, namely pristine GO, Porous Graphene Oxide (PGO) and a GO functionalized with polyetheramine (PEAGO). All of them provided a modest but clear increment of permeability of the Pebax matrix, from plus 2% (GO) to plus 8% (PGO), with no change in selectivity. The gas tested with this type of composites were CO2 and N2, for Post combustion capture applications. Pebax®2533 was also chemically modified, obtaining the product called “Benzoyl-P2533”, that was fully characterized, and tested in term of permeation using five gas: CO2, N2, CH4, O2, and He. Modified material showed an increment of the overall permeability of the material of a fair 10% for all gases tested, apart from helium, that increased of almost 50%.

Membrane elettrofilate a base di miscele polimeriche per la modifica strutturale di compositi laminati

I compositi laminati presentano problematiche legate alla delaminazione, ovvero al distaccamento delle lamine costituenti, ed allo scarso smorzamento delle vibrazioni (damping). L’obiettivo del presente elaborato di tesi è lo sviluppo e la produzione di membrane nanofibrose prodotte mediante elettrofilatura di blend polimeriche per la modifica strutturale di compositi laminati al fine di migliorarne la proprietà di damping e la resistenza alla delaminazione. Particolare attenzione è stata posta all’ottimizzazione sia dei parametri della soluzione (principalmente concentrazione e sistema solvente) che dei parametri di processo (portata, voltaggio applicato e distanza ago-collettore). La morfologia delle nanofibre è stata osservata mediante microscopia a scansione elettronica (SEM), la quale ha confermato la presenza di nanofibre con diametro nanometrico (200-800 nm), e prive di difetti (beads). Inoltre, le membrane sono state caratterizzate termicamente (TGA e DSC) e meccanicamente (prove di trazione).

Synthesis of Metal-Binding Ligand-Containing Copolymers, Nanoparticles and Blends

In this thesis we developed three copper-containing systems. Copper shows intriguing abilities in photocatalysis, however, one of the major limitations of many copper complexes is that photochemical properties might be quenched in solution caused by π-interactions between solvent and solute, due to Jahn-Teller distortion in the excited state. As such, we herein seek to synthesise copper heteroleptic complexes that will subsequently be nanoprecipitated with a polymer. This will allow the polymer to encase the complex and prevent the solvent-induced quenching. Subsequently, the preparation of blends of polymer with the aforementioned copper complexes, at different weight ratios is sought. The preparation of the blend is particularly interesting as the catalytic properties are anticipated to be inferior on account of the low surface area. However, owing to the polymer matrix better, mechanical properties are anticipated. The blends can combine the mechanical properties of the polymer and the luminescence of the complex, with the advantage that the polymer matrix can also prevent quenching from oxygen. As final task, we developed a copper-containing monomer. The synthesis of a monomer that contains copper and can be excited under ultraviolet (UV) light is particularly interesting.

Membrane elettrofilate biodegradabili a base di PBS e cheratina per il rilascio di farmaci ed ingegneria tissutale

Grazie agli sviluppi delle nanotecnologie biomedicali nell’ambito del rilascio controllato di farmaci e dell’ingegneria tissutale, sta diventando sempre più concreta la possibilità di superare i principali limiti della medicina tradizionale, basata nel primo caso su somministrazioni ripetute e a livello sistemico di principio attivo, e nel secondo caso sul trapianto (con relativi problemi di rigetto e carenza di donatori) e su trattamenti farmacologici non risolutivi. Tramite lo studio dei biomateriali e delle loro proprietà è invece possibile realizzare soluzioni ad hoc per l’ingegneria tissutale e per il rilascio controllato e mirato di farmaco. Nel presente studio, sono stati realizzati, mediante elettrofilatura, scaffolds a partire da blend fisiche di poli(butilene succinato) (PBS) e cheratina, a diversa composizione. Il primo è un polimero sintetico biocompatibile e approvato dalla Food and Drug Administration, con buone resistenza meccanica e lavorabilità, ma tempi di degradazione piuttosto lenti, a differenza della cheratina, polimero naturale, che risulta troppo rigido e difficile da processare, ma con buoni tempi di degradazione ed un’ottima biocompatibilità. Le blend sono state sottoposte a studi di miscibilità, mentre sui tappetini elettrofilati è stata effettuata una caratterizzazione morfologica, termica e meccanica. Inoltre, in vista di possibili applicazioni nell’ambito dell’ingegneria tissutale e del rilascio controllato di farmaco, si sono svolti anche test di biodegradazione in ambiente enzimatico e prove di biocompatibilità in vitro, nel primo caso, e studi di rilascio di diclofenac, comune antinfiammatorio, e test di adesione alla pelle, nel secondo caso. In conclusione, ogni tipo di indagine, seppur preliminare, ha comprovato che l’unione tra il PBS e la cheratina ha dato vita a nuove miscele facilmente processabili per potenziali utilizzi in due ambiti biomedicali di particolare interesse applicativo.

Copolimeri statistici di p-vinilfenolo e metilmetacrilato per la compatibilizzazione di miscele polimeriche

I biopolimeri, al centro dell’attenzione del mondo scientifico, non sempre presentano caratteristiche paragonabili a quelle dei polimeri tradizionali quindi una tecnica molto diffusa che si pone l’obiettivo di migliorare le loro proprietà è il blending. Tuttavia, dalla miscelazione due polimeri possono risultare miscibili, parzialmente miscibili o immiscibili. Nel caso in cui fossero immiscibili una pratica comune è quella di aggiungere un compatibilizzante con l’obiettivo di ridurre le tensioni interfacciali, stabilizzare la morfologia e migliorare le proprietà. Nello specifico PLA e PCL, immiscibili tra loro, presentano proprietà notevoli quindi il nostro contributo si inserisce in quest’ambito con l’obiettivo di progettare e sintetizzare nuovi compatibilizzanti, copolimeri statistici, composti da due unità monomeriche diverse da quelle che costituiscono il blend, tuttavia affini ognuna ad una delle due fasi. Al fine di studiare le loro potenziali attività compatibilizzanti i copolimeri sono stati aggiunti al blend PLA/PCL e sono state studiate le proprietà risultanti mediante analisi termiche, strutturali e morfologiche.

Damping and Thermomechanical behaviour of CFRP laminates modified with rubbery nanofibers

Nanofibrous membranes are a promising material for tailoring the properties of laminated CFRP composites by embedding them into the structure. This project aimed to understand the effect of number, position and thickness of nanofibrous modifications specifically on the damping behaviour of the resulting nano-modified CFRP composite with an epoxy matrix. An improvement of damping capacity is expected to improve a composites lifetime and fatigue resistance by prohibiting the formation of microcracks and consequently hindering delamination, it also promises a rise in comfort for a range of final products by intermission of vibration propagation and therefore diminution of noise. Electrospinning was the technique employed to produce nanofibrous membranes from a blend of polymeric solutions. SEM, WAXS and DSC were utilised to evaluate the quality of the obtained membranes before they were introduced, following a specific stacking sequence, in the production process of the laminate. A suitable curing cycle in an autoclave was applied to mend the modifications together with the matrix material, ensuring full crosslinking of the matrix and therefore finalising the production process. DMA was exercised in order to gain an understanding about the effects of the different modifications on the properties of the composite. During this investigation it became apparent that a high number of modifications of laminate CFRP composites, with an epoxy matrix, with thick rubbery nanofibrous membranes has a positive effect on the damping capacity and the temperature range the effect applies in. A suggestion for subsequent studies as well as a recommendation for the production of nano-modified CFRP structures is included at the end of this document.