Vestibular deficits do not underlie looping behavior in achiasmatic fish

Zebrafish belladonna (bel) mutants carry a mutation in the lhx2 gene that encodes a Lim domain homeobox transcription factor, leading to a defect in the retinotectal axon pathfinding. As a result, a large fraction of homozygous bel mutants is achiasmatic. Achiasmatic bel mutants display ocular motor instabilities, both reserved optokinetic response (OKR) and spontaneous eye oscillations, and an unstable swimming behavior, described as looping. All these unstable behaviors have been linked to the underlying optic nerve projection defect. Looping has been investigated under different visual stimuli and shown to be vision dependent and contrast sensitive. In addition, looping correlates perfectly with reversed OKR and the spontaneous oscillations of the eyes. Hence, it has been hypothesized that looping is a compensatory response to the perception of self-motion induced by the spontaneous eye oscillations. However, both ocular and postural instabilities could also be caused by a yet unidentified vestibular deficit. Here, we performed a preliminary test of the vestibular function in achiasmatic bel larval mutants in order to clarify the potential role of a vestibular deficit in looping. We found that the vestibular ocular reflex (VOR) is normally directed in both bel mutants and wild types and therefore exclude the possibility that nystagmus and looping in reverse to the rotating optokinetic drum can be attributed to an underlying vestibular deficit.

Morphofunctional adaptations of the olfactory mucosa in postnatally developing rabbits

Rabbits are born blind and deaf and receive unusually limited maternal care. Consequently, their suckling young heavily rely on the olfactory cue for nipple attachment. However, the postnatal morphofunctional adaptations of olfactory mucosa (OM) are not fully elucidated. To clarify on the extent and the pattern of refinement of the OM following birth in the rabbit, morphologic and morphometric analysis of the mucosa were done at neonatal (0-1 days), suckling (2 weeks), weanling (4 weeks), and adult (6-8 months) stages of postnatal development. In all the age groups, the basic components of the OM were present. However, proliferative activity of cells of the mucosal epithelium decreased with increasing age as revealed by Ki-67 immunostaining. Diameters of axon bundles, packing densities of olfactory cells, and cilia numbers per olfactory cell knob increased progressively with age being 5.5, 2.1, and 2.6 times, respectively, in the adult as compared with the neonate. Volume fraction values for the bundles increased by 5.3% from birth to suckling age and by 7.4% from weaning to adulthood and the bundle cores were infiltrated with blood capillaries in all ages except in the adult where such vessels were lacking. The pattern of cilia projection from olfactory cell knobs also showed age-related variations, that is, arose as a tuft from the tips of the knobs in neonates and sucklings and in a radial pattern from the knob bases in weanlings and adults. These morphological changes may be attributed to the high olfactory functional demand associated with postnatal development in the rabbit.

The Effects of Prenatal Exposure to Altered Melatonin Levels on Hippocampal Gene Expression in the Male Rat

The stability of the circadian rhythm for mammals depends on the levels of serotonin and melatonin, neurohormones that signal for lightness and darkness, respectively. Disruption in the stability of neurohormones has been shown to be a critical factor in psychopathological disorders in humans. For example, altering levels of melatonin in utero through administration of melatonin or the melatonin receptor antagonist, luzindole, has been shown to cause changes in developmental growth and adult behavior in the male rat. Analysis of relative adult hippocampal gene expression with RT-PCR revealed differences in ARNTL expression that suggested abnormality in clock gene expression of the rats that were prenatally exposed to altered levels of melatonin. Differences in the degree of plasticity as suggested by previous behavior testing did not result in differences in gene expression for GABA receptors or NMDA receptors. Morevoer, growth associated protein 43, GAP-43, a protein that is necessary for neuronal growth cones as well as long term learning has been found to be critical for axon and presynaptic terminal formation and retention in other studies, but hippocampal gene expression in our study showed no significant alteration after exposure to various maternal melatonin levels. However, ARNTL is a key regulatory component of clock genes and the circadian cycle so that alterations in the expression of thi critical gene may lead to critical changes in neuronal growth and plasticity. Our data support the conclusion that the manipulation of maternal melatonin levels alters the brain development and the circadian cycles that may lead to physiological and behavioral abnormalities in adult offspring.

The Role of Antennapedia in Anteroposterior Patterning of the Drosophila Melanogaster Ventral Nervous System

A major unresolved question in developmental neurobiology is how the nervous system is adapted to the specific needs of the organism at different life stages. In the holometabolous insect Drosophila melanogaster, the larval ventral nervous system (VNS) is comprised of similar repeating segments, as opposed to the adult VNS, which varies greatly from segment to segment both in number and types of neurons. The adult-specific neurons of each segment are generated by 25 distinct types of neuronal progenitor cells called neuroblasts (NBs) that appear in a stereotyped array (Truman et al., 2004). Each NB divides repeatedly to produce a distinct set of daughter cells termed a lineage, which is bilaterally symmetric but present to varying degrees in each segment. These daughter cells can be distinguished by their position within the nervous system as well as by their axonal projections. Each of the 25 NBs produces neurons; if both daughter cells are present in a lineage then both sibling populations survived, whereas if only one projection is seen cell death occurred, leaving a hemilineage (half lineage). In some lineages, the same sibling type survives in all segments in which the lineage appears, but in others, the surviving sibling type varies across segments, resulting in a different morphology for the same lineage in different segments. How are these differences in survival and morphology controlled? The Hox genes provide positional information for developing structures along the anterior-posterior (AP) axis of animals. They encode transcription factors, thereby controlling the activity of genes down stream. In the postembryonic VNS, each NB lineage features its own characteristic expression pattern of Hox genes Antp and Ubx, which can vary from segment-to-segment, and can thereby cause variation in the number of neural cells and axonal projections that survive. This study defines the wild-type expression pattern of Antp and elucidates the role of Antp in gain of function studies. These studies are possible due to the MARCM (Mosaic Analysis with a Repressible Cell Marker) method, which allows the genetically manipulated cells to be specifically labeled in an otherwise normal, unlabeled organism. The results indicate that Antp is expressed in a segment-, lineage-, and hemilineage-specific manner. Antp is sufficient for both anterior and posterior transformations of particular lineages, including promotion of cell death and/or survival as well as axon guidance.

Distribution of muscarinic receptor subtypes and interstitial cells of Cajal in the gastrointestinal tract of healthy dairy cows

OBJECTIVE: To describe the distribution of muscarinic receptor subtypes M(1) to M(5) and interstitial cells of Cajal (ICCs) in the gastrointestinal tract of healthy dairy cows. SAMPLE POPULATION: Full-thickness samples were collected from the fundus, corpus, and pyloric part of the abomasum and from the duodenum, ileum, cecum, proximal loop of the ascending colon, and both external loops of the spiral colon of 5 healthy dairy cows after slaughter. PROCEDURES: Samples were fixed in paraformaldehyde and embedded in paraffin. Muscarinic receptor subtypes and ICCs were identified by immunohistochemical analysis. RESULTS: Staining for M(1) receptors was found in the submucosal plexus and myenteric plexus. Antibodies against M(2) receptors stained nuclei of smooth muscle cells only. Evidence of M(3) receptors was found in the lamina propria, in intramuscular neuronal terminals, on intermuscular nerve fibers, and on myocytes of microvessels. There was no staining for M(4) receptors. Staining for M(5) receptors was evident in the myocytes of microvessels and in smooth muscle cells. The ICCs were detected in the myenteric plexus and within smooth muscle layers. Distribution among locations of the bovine gastrointestinal tract did not differ for muscarinic receptor subtypes or ICCs. CONCLUSIONS AND CLINICAL RELEVANCE: The broad distribution of M(1), M(3), M(5), and ICCs in the bovine gastrointestinal tract indicated that these components are likely to play an important role in the regulation of gastrointestinal tract motility in healthy dairy cows. Muscarinic receptors and ICCs may be implicated in the pathogenesis of motility disorders, such as abomasal displacement and cecal dilatation-dislocation.

Neurodegenerative diseases in domestic animals: a comparative review

Neurodegenerative diseases are characterised by selective damage to specific neurons in the nervous system. Interest in such diseases in humans has resulted in considerable progress in the molecular understanding of these disorders in recent decades. Numerous neurodegenerative diseases have also been described in domestic animals but relatively little molecular work has been reported. In the present review, we have classified neurodegenerative disease according to neuroanatomical criteria. We have established two large groups, based on whether the neuronal cell body or its axon was primarily affected. Conditions such as motor neuron diseases, cerebellar degenerations and neuroaxonal dystrophies are discussed in terms of their clinical and neuropathological features. In the most studied disorders, we also present what is known about underlying pathomechanisms, and compare them with their human counterparts. The purpose of this review is to re-kindle interest in this group of diseases and to encourage veterinary researchers to investigate molecular mechanisms by taking advantage of current diagnostic tools.

EphrinB phosphorylation and reverse signaling: regulation by Src kinases and PTP-BL phosphatase

Ephrins are cell surface-associated ligands for Eph receptors and are important regulators of morphogenic processes such as axon guidance and angiogenesis. Transmembrane ephrinB ligands act as "receptor-like" signaling molecules, in part mediated by tyrosine phosphorylation and by engagement with PDZ domain proteins. However, the underlying cell biology and signaling mechanisms are poorly understood. Here we show that Src family kinases (SFKs) are positive regulators of ephrinB phosphorylation and phosphotyrosine-mediated reverse signaling. EphB receptor engagement of ephrinB causes rapid recruitment of SFKs to ephrinB expression domains and transient SFK activation. With delayed kinetics, ephrinB ligands recruit the cytoplasmic PDZ domain containing protein tyrosine phosphatase PTP-BL and are dephosphorylated. Our data suggest the presence of a switch mechanism that allows a shift from phosphotyrosine/SFK-dependent signaling to PDZ-dependent signaling.

Roles of ephrinB ligands and EphB receptors in cardiovascular development: demarcation of arterial/venous domains, vascular morphogenesis, and sprouting angiogenesis

Eph receptor tyrosine kinases and their cell-surface-bound ligands, the ephrins, regulate axon guidance and bundling in the developing brain, control cell migration and adhesion, and help patterning the embryo. Here we report that two ephrinB ligands and three EphB receptors are expressed in and regulate the formation of the vascular network. Mice lacking ephrinB2 and a proportion of double mutants deficient in EphB2 and EphB3 receptor signaling die in utero before embryonic day 11.5 (E11.5) because of defects in the remodeling of the embryonic vascular system. Our phenotypic analysis suggests complex interactions and multiple functions of Eph receptors and ephrins in the embryonic vasculature. Interaction between ephrinB2 on arteries and its EphB receptors on veins suggests a role in defining boundaries between arterial and venous domains. Expression of ephrinB1 by arterial and venous endothelial cells and EphB3 by veins and some arteries indicates that endothelial cell-to-cell interactions between ephrins and Eph receptors are not restricted to the border between arteries and veins. Furthermore, expression of ephrinB2 and EphB2 in mesenchyme adjacent to vessels and vascular defects in ephB2/ephB3 double mutants indicate a requirement for ephrin-Eph signaling between endothelial cells and surrounding mesenchymal cells. Finally, ephrinB ligands induce capillary sprouting in vitro with a similar efficiency as angiopoietin-1 (Ang1) and vascular endothelial growth factor (VEGF), demonstrating a stimulatory role of ephrins in the remodeling of the developing vascular system.

Subcolumnar Dendritic and Axonal Organization of Spiny Stellate and Star Pyramid Neurons within a Barrel in Rat Somatosensory Cortex

Excitatory neurons at the level of cortical layer 4 in the rodent somatosensory barrel field often display a strong eccentricity in comparison with layer 4 neurons in other cortical regions. In rat, dendritic symmetry of the 2 main excitatory neuronal classes, spiny stellate and star pyramid neurons (SSNs and SPNs), was quantified by an asymmetry index, the dendrite-free angle. We carefully measured shrinkage and analyzed its influence on morphological parameters. SSNs had mostly eccentric morphology, whereas SPNs were nearly radially symmetric. Most asymmetric neurons were located near the barrel border. The axonal projections, analyzed at the level of layer 4, were mostly restricted to a single barrel except for those of 3 interbarrel projection neurons. Comparing voxel representations of dendrites and axon collaterals of the same neuron revealed a close overlap of dendritic and axonal fields, more pronounced in SSNs versus SPNs and considerably stronger in spiny L4 neurons versus extragranular pyramidal cells. These observations suggest that within a barrel dendrites and axons of individual excitatory cells are organized in subcolumns that may confer receptive field properties such as directional selectivity to higher layers, whereas the interbarrel projections challenge our view of barrels as completely independent processors of thalamic input.

New ways of looking at synapses

Current concepts of synaptic fine-structure are derived from electron microscopic studies of tissue fixed by chemical fixation using aldehydes. However, chemical fixation with glutaraldehyde and paraformaldehyde and subsequent dehydration in ethanol result in uncontrolled tissue shrinkage. While electron microscopy allows for the unequivocal identification of synaptic contacts, it cannot be used for real-time analysis of structural changes at synapses. For the latter purpose advanced fluorescence microscopy techniques are to be applied which, however, do not allow for the identification of synaptic contacts. Here, two approaches are described that may overcome, at least in part, some of these drawbacks in the study of synapses. By focusing on a characteristic, easily identifiable synapse, the mossy fiber synapse in the hippocampus, we first describe high-pressure freezing of fresh tissue as a method that may be applied to study subtle changes in synaptic ultrastructure associated with functional synaptic plasticity. Next, we propose to label presynaptic mossy fiber terminals and postsynaptic complex spines on CA3 pyramidal neurons by different fluorescent dyes to allow for the real-time monitoring of these synapses in living tissue over extended periods of time. We expect these approaches to lead to new insights into the structure and function of central synapses.

AN ASSESSMENT OF BALLAST SOURCE'S QUALITY AND LOCATIONS WITH RESPECT TO MDOT'S UPGRADE OF THE WOLVERINE RAILROAD LINE FOR HIGH SPEED RAIL USEAGE

The Michigan Department of Transportation is evaluating upgrading their portion of the Wolverine Line between Chicago and Detroit to accommodate high speed rail. This will entail upgrading the track to allow trains to run at speeds in excess of 110 miles per hour (mph). An important component of this upgrade will be to assess the requirement for ballast material for high speed rail. In the event that the existing ballast materials do not meet specifications for higher speed train, additional ballast will be required. The purpose of this study, therefore, is to investigate the current MDOT railroad ballast quality specifications and compare them to both the national and international specifications for use on high speed rail lines. The study found that while MDOT has quality specifications for railroad ballast it does not have any for high speed rail. In addition, the American Railway Engineering and Maintenance-of-Way Association (AREMA), while also having specifications for railroad ballast, does not have specific specifications for high speed rail lines. The AREMA aggregate specifications for ballast include the following tests: (1) LA Abrasion, (2) Percent Moisture Absorption, (3) Flat and Elongated Particles, (4) Sulfate Soundness test. Internationally, some countries do require a highly standard for high speed rail such as the Los Angeles (LA) Abrasion test, which is uses a higher standard performance and the Micro Duval test, which is used to determine the maximum speed that a high speed can operate at. Since there are no existing MDOT ballast specification for high speed rail, it is assumed that aggregate ballast specifications for the Wolverine Line will use the higher international specifications. The Wolverine line, however, is located in southern Michigan is a region of sedimentary rocks which generally do not meet the existing MDOT ballast specifications. The investigation found that there were only 12 quarries in the Michigan that meet the MDOT specification. Of these 12 quarries, six were igneous or metamorphic rock quarries, while six were carbonate quarries. Of the six carbonate quarries four were locate in the Lower Peninsula and two in the Upper Peninsula. Two of the carbonate quarries were located in near proximity to the Wolverine Line, while the remaining quarries were at a significant haulage distance. In either case, the cost of haulage becomes an important consideration. In this regard, four of the quarries were located with lake terminals allowing water transportation to down state ports. The Upper Peninsula also has a significant amount of metal based mining in both igneous and metamorphic rock that generate significant amount of waste rock that could be used as a ballast material. The main drawback, however, is the distance to the Wolverine rail line. One potential source is the Cliffs Natural Resources that operates two large surface mines in the Marquette area with rail and water transportation to both Lake Superior and Lake Michigan. Both mines mine rock with a very high compressive strength far in excess of most ballast materials used in the United States and would make an excellent ballast materials. Discussions with Cliffs, however, indicated that due to environmental concerns that they would most likely not be interested in producing a ballast material. In the United States carbonate aggregates, while used for ballast, many times don't meet the ballast specifications in addition to the problem of particle degradation that can lead to fouling and cementation issues. Thus, many carbonate aggregate quarries in close proximity to railroads are not used. Since Michigan has a significant amount of carbonate quarries, the research also investigated using the dynamic properties of aggregate as a possible additional test for aggregate ballast quality. The dynamic strength of a material can be assessed using a split Hopkinson Pressure Bar (SHPB). The SHPB has been traditionally used to assess the dynamic properties of metal but over the past 20 years it is now being used to assess the dynamic properties of brittle materials such as ceramics and rock. In addition, the wear properties of metals have been related to their dynamic properties. Wear or breakdown of railroad ballast materials is one of the main problems with ballast material due to the dynamic loading generated by trains and which will be significantly higher for high speed rails. Previous research has indicated that the Port Inland quarry along Lake Michigan in the Southern Upper Peninsula has significant dynamic properties that might make it potentially useable as an aggregate for high speed rail. The dynamic strength testing conducted in this research indicate that the Port Inland limestone in fact has a dynamic strength close to igneous rocks and much higher than other carbonate rocks in the Great Lakes region. It is recommended that further research be conducted to investigate the Port Inland limestone as a high speed ballast material.

A 45nm CMOS DESIGN OF NEUROMORPHIC SYSTEM

Neuromorphic computing has become an emerging field in wide range of applications. Its challenge lies in developing a brain-inspired architecture that can emulate human brain and can work for real time applications. In this report a flexible neural architecture is presented which consists of 128 X 128 SRAM crossbar memory and 128 spiking neurons. For Neuron, digital integrate and fire model is used. All components are designed in 45nm technology node. The core can be configured for certain Neuron parameters, Axon types and synapses states and are fully digitally implemented. Learning for this architecture is done offline. To train this circuit a well-known algorithm Restricted Boltzmann Machine (RBM) is used and linear classifiers are trained at the output of RBM. Finally, circuit was tested for handwritten digit recognition application. Future prospects for this architecture are also discussed.

Development of room temperature operating single electron transistor using FIB etching and deposition technology

The single-electron transistor (SET) is one of the best candidates for future nano electronic circuits because of its ultralow power consumption, small size and unique functionality. SET devices operate on the principle of Coulomb blockade, which is more prominent at dimensions of a few nano meters. Typically, the SET device consists of two capacitively coupled ultra-small tunnel junctions with a nano island between them. In order to observe the Coulomb blockade effects in a SET device the charging energy of the device has to be greater that the thermal energy. This condition limits the operation of most of the existing SET devices to cryogenic temperatures. Room temperature operation of SET devices requires sub-10nm nano-islands due to the inverse dependence of charging energy on the radius of the conducting nano-island. Fabrication of sub-10nm structures using lithography processes is still a technological challenge. In the present investigation, Focused Ion Beam based etch and deposition technology is used to fabricate single electron transistors devices operating at room temperature. The SET device incorporates an array of tungsten nano-islands with an average diameter of 8nm. The fabricated devices are characterized at room temperature and clear Coulomb blockade and Coulomb oscillations are observed. An improvement in the resolution limitation of the FIB etching process is demonstrated by optimizing the thickness of the active layer. SET devices with structural and topological variation are developed to explore their impact on the behavior of the device. The threshold voltage of the device was minimized to ~500mV by minimizing the source-drain gap of the device to 17nm. Vertical source and drain terminals are fabricated to realize single-dot based SET device. A unique process flow is developed to fabricate Si dot based SET devices for better gate controllability in the device characteristic. The device vi parameters of the fabricated devices are extracted by using a conductance model. Finally, characteristic of these devices are validated with the simulated data from theoretical modeling.

Semi-Automated Creation of Converged iTV Services: From Macromedia Director Simulations to Services Ready for Broadcast

While sound and video may capture viewers' attention, interaction can captivate them. This has not been available prior to the advent of Digital Television. In fact, what lies at the heart of the Digital Television revolution is this new type of interactive content, offered in the form of interactive Television (iTV) services. On top of that, the new world of converged networks has created a demand for a new type of converged services on a range of mobile terminals (Tablet PCs, PDAs and mobile phones). This paper aims at presenting a new approach to service creation that allows for the semi-automatic translation of simulations and rapid prototypes created in the accessible desktop multimedia authoring package Macromedia Director into services ready for broadcast. This is achieved by a series of tools that de-skill and speed-up the process of creating digital TV user interfaces (UI) and applications for mobile terminals. The benefits of rapid prototyping are essential for the production of these new types of services, and are therefore discussed in the first section of this paper. In the following sections, an overview of the operation of content, service, creation and management sub-systems is presented, which illustrates why these tools compose an important and integral part of a system responsible of creating, delivering and managing converged broadcast and telecommunications services. The next section examines a number of metadata languages candidates for describing the iTV services user interface and the schema language adopted in this project. A detailed description of the operation of the two tools is provided to offer an insight of how they can be used to de-skill and speed-up the process of creating digital TV user interfaces and applications for mobile terminals. Finally, representative broadcast oriented and telecommunication oriented converged service components are also introduced, demonstrating how these tools have been used to generate different types of services.

Methods and Applications in Interactive Broadcasting

Interactive TV technology has been addressed in many previous works, but there is sparse research on the topic of interactive content broadcasting and how to support the production process. In this article, the interactive broadcasting process is broadly defined to include studio technology and digital TV applications at consumer set-top boxes. In particular, augmented reality studio technology employs smart-projectors as light sources and blends real scenes with interactive computer graphics that are controlled at end-user terminals. Moreover, TV producer-friendly multimedia authoring tools empower the development of novel TV formats. Finally, the support for user-contributed content raises the potential to revolutionize the hierarchical TV production process, by introducing the viewer as part of content delivery chain.