Thiolated Au18cluster: preferred Ag sites for doping, structures, and optical and chiroptical properties

Recently, the X-ray determined structure of the thiolated Au18 cluster has been reported. In this communication, we addressed a study of structures and chiroptical properties of thiolated Au18 cluster doped with up to ten Ag atoms, which have been calculated by Time Dependent Density Functional Theory (TD-DFT). The number of Ag atoms was steadily varied and more stable isomers showed optical and Circular Dichroism (CD) spectra distinct from that found for the parent Au18 cluster. Doping with more than four Ag atoms results in enhancement of the oscillator strength of the HOMO–LUMO peak and it is expected that this feature can be exploited for photoluminescence applications.

Sustentabilidade do betão: Comportamento de betões com substituição parcial de cimento portland por adições quase inertes

Os betões atuais são materiais com custos extremamente competitivos devido ao baixo custo do cimento Portland. Contudo, os elevados níveis de emissões de C02 gerados na sua produção provocam o aumento do custo final do produto, tanto económico como ambiental. Devido a esta situação algumas adições têm sido estudadas como alternativas para substituir parcialmente os conteúdos de cimento no fabrico de betão. Uma vez que existem grandes quantidades de pó de mármore inutilizadas na região de Évora decidiu-se avaliar o seu comportamento. O pó de mármore foi adicionado em certas percentagens de forma a reduzir os conteúdos de cimento, permitindo avaliar se este iria manter e/ou melhorar as características de resistência à compressão e trabalhabilidade do betão. Além de avaliado o comportamento desta adição, o mesmo foi também comparado com a adição de filer calcário nas mesmas percentagens. Os resultados obtidos demonstraram a exequibilidade da utilização de ambas as adições. ABSTRACT: Concretes currently used in construction are materials with very competitive costs due to the low cost of Portland cement. However, high levels of C02 emissions generated in its production cause an increase of the final cost of the product, both economically and environmentally. Due to this situation, some additions have been studied as alternatives to replace partially cement contents in concrete production. Since there are large quantities of marble dust in the region of Évora, it was decided to evaluate his behavior. The marble dust was added in known percentages so the cement contents could be reduced, allowing evaluating if it will maintain and/or improve the characteristics of the compressive strength and workability of the concrete. ln addition to evaluating the behavior of marble dust, this addition was also compared with the addition of limestone filler in the same percentages. The results demonstrated the feasibility of using both additions.

Building partnership for drug and ag discovery and conservation of the natural resources in Brazil.

2009

Ag Decision Maker, November 2016, Vol. 21, no. 1

A Business Newsletter for Agriculture

Ag Decision Maker, December 2016, Vol. 21, no. 2

A Business Newsletter for Agriculture

Ag Decision Maker, January 2017, Vol. 21, no. 3

A Business Newsletter for Agriculture

Studio del metodo di preparazione di elettrocatalizzatori 3D Ag/Cu nella riduzione selettiva del 5-idrossimetilfurfurale

In questo lavoro di tesi sono stati preparati elettrocatalizzatori metallici 3D di argento supportato su schiume di rame a cella aperta, impiegandoli nella riduzione selettiva del 5-idrossimetilfurfurale (HMF) a 2,5-bisidrossimetilfurano (BHMF). L’utilizzo di questi supporti consente di incrementare l’area superficiale a disposizione, rispetto ai supporti 2D. La preparazione delle schiume è stata effettuata utilizzando due metodi di deposizione: spostamento galvanico ed elettrodeposizione. Lo scopo del lavoro è valutare l’influenza del metodo di deposizione sull’attività catalitica, per questo motivo le schiume bimetalliche ottenute sono state confrontate a quelle monometalliche di rame e argento. Inoltre è stato studiato l’effetto della concentrazione di HMF sulle prestazioni dei catalizzatori, con l’obiettivo finale di ottenere un sistema attivo a concentrazioni industriali. Le schiume sono state sottoposte a cicli di prove catalitiche a concentrazione di HMF crescente 0,02 M, 0,05 M e 0,10 M e caratterizzate prima e dopo la sequenza di prove con analisi SEM-EDS, XRD, spettroscopia raman. Le soluzioni sono state analizzate mediante ICP, GC-MS, ESI-MS. Con lo spostamento galvanico si ha la crescita di dendriti, formate prevalentemente sui bordi, e agglomerati di particelle nelle zone interne, mentre per elettrodeposizione si ottiene minore formazione di dendriti e particelle mediamente più piccole. La presenza di argento come fase attiva non migliora la conversione rispetto alle schiume monometalliche, ma causa un aumento di selettività ed efficienza faradica. Incrementando la concentrazione di HMF tutti i campioni presentano un aumento di conversione e un decremento di selettività ed efficienza faradica. Il catalizzatore ottenuto per spostamento galvanico, mostra prestazioni migliori a concentrazioni elevate e nelle prove di stabilità non dà segni di disattivazione, al contrario della schiuma preparata per elettrodeposizione che risulta leggermente disattivata.

Sintesi e caratterizzazione di cluster Ag-Cu-Fe, Au-Cu-Fe e Ni-Pd

Durante il mio periodo di tirocinio mi sono occupato della sintesi e caratterizzazione di cluster carbonilici eterometallici, ed in particolare di cluster Ag-Cu-Fe, Au-Cu-Fe, e Ni-Pd. In un primo momento il lavoro si è concentrato sullo studio della reazione tra cluster Cu-Fe e sali di Ag e Au, con lo scopo di ottenere specie Ag-Cu-Fe, e Au-Cu-Fe. Nella seconda parte l’attività è stata incentrata sulla sintesi di cluster Ni-Pd ad elevata nuclearità, attraverso reazioni tra [Ni6(CO)12]2- e composti di Pd(II). In entrambi i casi le sintesi sono state condotte variando i rapporti stechiometrici dei reagenti e i solventi, permettendo l’ottenimento di specie, caratterizzate spettroscopicamente mediante tecnica IR. In alcuni casi è stato anche possibile ottenere cristalli caratterizzati strutturalmente tramite diffrattometria a raggi X. Le reazioni di [Cu3Fe3(CO)12]3- con quantità crescenti di M=Ag, Au danno luogo alla formazione in sequenza di [Cu5Fe4(CO)16]3-, [MxCu5-xFe4(CO)16]3- (x = 0-5), [M5Fe4(CO)16]3-, [M6Fe4(CO)16]2-. Successivamente, nel caso in cui M= Ag, un ulteriore aggiunta di sali di M+ porta alla formazione di [Ag13Fe8(CO)32]3-, mentre se M= Au si formano i cosiddetti “bruni d’oro” e alla fine, [AuFe4(CO)16]-. Le specie [MxCu5-xFe4(CO)16]3- risultano particolarmente interessanti dato che possono essere viste come leghe molecolari M/Cu, che mostrano disordine sia sostituzionale che composizionale. Per quanto riguarda i cluster Ni-Pd sono state ottenute tre nuove specie carboniliche ad elevata nuclearità, ovvero [Ni37-xPd7+x(CO)48]6- (x= 0,69), [HNi37-xPd7+x(CO)48]5- (x= 0,53) and [Ni22-xPd20+x(CO)48]6- (x = 0.63). In tutte queste strutture il Pd tende ad occupare posizioni che minimizzano le interazioni Pd-CO massimizzando le interazioni M-M, mentre l’opposto risulta per il Ni. Ciò si traduce in una parziale segregazione dei due metalli, anche se alcuni fenomeni di disordine (sostituzionale e composizionale) sono presenti in tali strutture.

A Highly Improved Method For Sensitive Determination Of Amitriptyline In Pharmaceutical Formulations Using An Unmodified Carbon Nanotube Electrode In The Presence Of Sulfuric Acid.

The present paper describes a novel, simple and reliable differential pulse voltammetric method for determining amitriptyline (AMT) in pharmaceutical formulations. It has been described for many authors that this antidepressant is electrochemically inactive at carbon electrodes. However, the procedure proposed herein consisted in electrochemically oxidizing AMT at an unmodified carbon nanotube paste electrode in the presence of 0.1 mol L(-1) sulfuric acid used as electrolyte. At such concentration, the acid facilitated the AMT electroxidation through one-electron transfer at 1.33 V vs. Ag/AgCl, as observed by the augmentation of peak current. Concerning optimized conditions (modulation time 5 ms, scan rate 90 mV s(-1), and pulse amplitude 120 mV) a linear calibration curve was constructed in the range of 0.0-30.0 μmol L(-1), with a correlation coefficient of 0.9991 and a limit of detection of 1.61 μmol L(-1). The procedure was successfully validated for intra- and inter-day precision and accuracy. Moreover, its feasibility was assessed through analysis of commercial pharmaceutical formulations and it has been compared to the UV-vis spectrophotometric method used as standard analytical technique recommended by the Brazilian Pharmacopoeia.

Lawsonia Inermis-mediated Synthesis Of Silver Nanoparticles: Activity Against Human Pathogenic Fungi And Bacteria With Special Reference To Formulation Of An Antimicrobial Nanogel.

Lawsonia inermis mediated synthesis of silver nanoparticles (Ag-NPs) and its efficacy against Candida albicans, Microsporum canis, Propioniabacterium acne and Trichophyton mentagrophytes is reported. A two-step mechanism has been proposed for bioreduction and formation of an intermediate complex leading to the synthesis of capped nanoparticles was developed. In addition, antimicrobial gel for M. canis and T. mentagrophytes was also formulated. Ag-NPs were synthesized by challenging the leaft extract of L. inermis with 1 mM AgNO₃. The Ag-NPs were characterized by Ultraviolet-Visible (UV-Vis) spectrophotometer and Fourier transform infrared spectroscopy (FTIR). Transmission electron microscopy (TEM), nanoparticle tracking and analysis sytem (NTA) and zeta potential was measured to detect the size of Ag-NPs. The antimicrobial activity of Ag-NPs was evaluated by disc diffusion method against the test organisms. Thus these Ag-NPs may prove as a better candidate drug due to their biogenic nature. Moreover, Ag-NPs may be an answer to the drug-resistant microorganisms.

Inactivation Of Ampk Mediates High Phosphate-induced Extracellular Matrix Accumulation Via Nox4/tgfß-1 Signaling In Human Mesangial Cells.

High phosphate (Pi) levels and extracellular matrix (ECM) accumulation are associated with chronic kidney disease progression. However, how high Pi levels contribute to ECM accumulation in mesangial cells is unknown. The present study investigated the role and mechanism of high Pi levels in ECM accumulation in immortalized human mesangial cells (iHMCs). iHMCs were exposed to normal (0.9 mM) or increasing Pi concentrations (2.5 and 5 mM) with or without diferent blockers or activators. NOX4, phosphorylated AMPK (p-AMPK), phosphorylated SMAD3 (p-SMAD3), fibronectin (F/N), collagen IV (C-IV) and alpha-smooth muscle actin (α-SMA) expression was assessed via western blot and immunofluorescence. Lucigenin-enhanced chemiluminescence, and dihydroethidium (DHE) assessed NADPH oxidase activity and superoxide (SO), respectively. In iHMCs, a Pi transporter blocker (PFA) abrogated high Pi-induced AMPK inactivation, increase in NADPH oxidase-induced reactive oxygen species (ROS) levels, NOX4, p-SMAD3, α-SMA and C-IV expression. AMPK activation by AICAR, NOX4 silencing or NADPH oxidase blocker prevented high Pi-induced DHE levels, p-SMAD3, F/N, C-IV and α-SMA expression. AMPK inactivation with NOX4-induced ROS formation and transforming growth factor ß-1 (TGFß-1) signaling activation mediates high Pi-induced ECM accumulation in iHMCs. Maneuvers increasing AMPK or reducing NOX4 activity may contribute to renal protection under hyperphosphatemia.

Species Fractionation In Atomic Chains From Mechanically Stretched Alloys.

Bettini et al (2006 Nat. Nanotechnol. 1 182-5) reported the first experimental realization of linear atomic chains (LACs) composed of different atoms (Au and Ag). The different contents of Au and Ag were observed in the chains from what was found in the bulk alloys, which raises the question of what the wire composition is, if it is in equilibrium with a bulk alloy. In this work we address the thermodynamic driving force for species fractionation in LACs under tension, and we present the density-functional theory results for Ag-Au chain alloys. A pronounced stabilization of the wires with an alternating Ag-Au sequence is observed, which could be behind the experimentally observed Au enrichment in LACs from alloys with high Ag content.

Preserved Fertility In A Patient With Gynecomastia Associated With The P.pro695ser Mutation In The Androgen Receptor.

The androgen insensitivity syndrome (AIS) is described as a dysfunction of the androgen receptor (AR) in 46,XY individuals, which can be associated with mutations in the AR gene or can be due to unknown mechanisms. Different mutations in AIS generally cause variable phenotypes that range from a complete hormone resistance to a mild form usually associated with male infertility. The purpose of this study was to search for mutations in the AR gene in a fertile man with gynecomastia and to evaluate the influence of the mutation on the AR transactivation ability. Sequencing of the AR gene revealed the p.Pro695Ser mutation. It is located within the AR ligand-binding domain. Bioinformatics analysis indicated a deleterious role, which was verified after testing transactivation activity and N-/C-terminal (N/C) interaction by in vitro expression of a reporter gene and 2-hybrid assays. p.Pro695Ser showed low levels of both transactivation activity and N/C interaction at low dihydrotestosterone (DHT) conditions. As the ligand concentration increased, both transactivation activity and N/C interaction also increased and reached normal levels. Therefore, this study provides functional insights for the p.Pro695Ser mutation described here for the first time in a patient with mild AIS. The expression profile of p.Pro695Ser not only correlates to the patient's phenotype, but also suggests that a high-dose DHT therapy may overcome the functional deficit of the mutant AR.

Preparation Of An Agar-silver Nanoparticles (a-agnp) Film For Increasing The Shelf-life Of Fruits.

Preparation of protective coating possessing antimicrobial properties is present day need as they increase the shelf life of fruits and vegetables. In the present study, preparation of agar-silver nanoparticle film for increasing the shelf life of fruits is reported. Silver nanoparticles (Ag-NPs) biosynthesised using an extract of Ocimum sanctum leaves, were mixed with agar-agar to prepare an agar-silver nanoparticles (A-AgNp) film. This film was surface-coated over the fruits, Citrus aurantifolium (Thornless lime) and Pyrus malus (Apple), and evaluated for the determination of antimicrobial activity of A-AgNp films using disc diffusion method, weight loss and shelf life of fruits. This study demonstrates that these A-AgNp films possess antimicrobial activity and also increase the shelf life of fruits.