The knowledge and use of critical thinking teaching strategies of faculty in associate degree nursing education programs

The purpose of this study was to determine the knowledge and use of critical thinking teaching strategies by full-time and part-time faculty in Associate Degree Nursing (ADN) programs. Sander's CTI (1992) instrument was adapted for this study and pilottested prior to the general administration to ADN faculty in Southeast Florida. This modified instrument, now termed the Burroughs Teaching Strategy Inventory (BTSI), returned reliability estimates (Cronbach alphas of .71, .74, and .82 for the three constructs) comparable to the original instrument. The BTSI was administered to 113 full-time and part-time nursing faculty in three community college nursing programs. The response rate was 92% for full-time faculty (n = 58) and 61 % for part-time faculty (n = 55). The majority of participants supported a combined definition of critical thinking in nursing which represented a composite of thinking skills that included reflective thinking, assessing alternative viewpoints, and the use of problem-solving. Full-time and part-time faculty used different teaching strategies. Fulltime faculty most often used multiple-choice exams and lecture while part-time faculty most frequently used discussion within their classes. One possible explanation for specific strategy choices and differences might be that full-time faculty taught predominately in theory classes where certain strategies would be more appropriate and part-time faculty taught predominately clinical classes. Both faculty types selected written nursing care plans as the second most effective critical thinking strategy. Faculty identified several strategies as being effective in teaching critical thinking. These strategies included discussion, case studies, higher order questioning, and concept analysis. These however, were not always the strategies that were used in either the classroom or clinical setting. Based on this study, the author recommends that if the profession continues to stress critical thinking as a vital component of practice, nursing faculty should receive education in appropriate critical teaching strategies. Both in-service seminars and workshops could be used to further the knowledge and use of critical thinking strategies by faculty. Qualitative research should be done to determine why nursing faculty use self-selected teaching strategies.

Acceptable vs. marginal police officers' psychological ratings : a longitudinal comparison of job performance

Archival research was conducted on the inception of preemployment psychological testing, as part of the background screening process, to select police officers for a local police department. Various issues and incidents were analyzed to help explain why this police department progressed from an abbreviated version of a psychological battery, to a much more sophisticated and comprehensive set of instruments. While doubts about psychological exams do exist, research has shown that many are valid and reliable in predicting job performance of police candidates. During a three year period, a police department hired 162 candidates (133 males and 29 females) who received "acceptable" psychological ratings and 71 candidates (58 males and 13 females) who received "marginal" psychological ratings. A document analysis consisted of variables that have been identified as job performance indicators which police psychological testing tries to predict, and "screen in" or "screen out" appropriate applicants. The areas of focus comprised the 6-month police academy, the 4-month Field Training Officer (FTO) Program, the remaining probationary period, and yearly performance up to five years of employment. Specific job performance variables were the final academy grade average, supervisors' evaluation ratings, reprimands, commendations, awards, citizen complaints, time losses, sick time usage, reassignments, promotions, and separations. A causal-comparative research design was used to determine if there were significant statistical differences in these job performance variables between police officers with "acceptable" psychological ratings and police officers with "marginal" psychological ratings. The results of multivariate analyses of variance, t-tests, and chi-square procedures as applicable, showed no significant differences between the two groups on any of the job performance variables.

Design and development of a one-degree-of-freedom force-reflecting manual controller prototype for teleoperation

The present research is carried out from the viewpoint of primarily space applications where human lives may be in danger if they are to work under these conditions. This work proposes to develop a one-degree-of-freedom (1-DOF) force-reflecting manual controller (FRMC) prototype for teleoperation, and address the effects of time delays commonly found in space applications where the control is accomplished via the earth-based control stations. To test the FRMC, a mobile robot (PPRK) and a slider-bar were developed and integrated to the 1-DOF FRMC. The software developed in Visual Basic is able to telecontrol any platform that uses an SV203 controller through the internet and it allows the remote system to send feedback information which may be in the form of visual or force signals. Time delay experiments were conducted on the platform and the effects of time delay on the FRMC system operation have been studied and delineated.

Half-degree gridded nitrogen and phosphorus fertilizer use for global agriculture production during 1900-2013

In addition to enhance agricultural productivity, synthetic nitrogen (N) and phosphorous (P) fertilizer application in croplands dramatically altered global nutrient budget, water quality, greenhouse gas balance, and their feedbacks to the climate system. However, due to the lack of geospatial fertilizer input data, current Earth system/land surface modeling studies have to ignore or use over-simplified data (e.g., static, spatially uniform fertilizer use) to characterize agricultural N and P input over decadal or century-long period. We therefore develop a global time-series gridded data of annual synthetic N and P fertilizer use rate in croplands, matched with HYDE 3,2 historical land use maps, at a resolution of 0.5º latitude by longitude during 1900-2013. Our data indicate N and P fertilizer use rates increased by approximately 8 times and 3 times, respectively, since the year 1961, when IFA (International Fertilizer Industry Association) and FAO (Food and Agricultural Organization) survey of country-level fertilizer input were available. Considering cropland expansion, increase of total fertilizer consumption amount is even larger. Hotspots of agricultural N fertilizer use shifted from the U.S. and Western Europe in the 1960s to East Asia in the early 21st century. P fertilizer input show the similar pattern with additional hotspot in Brazil. We find a global increase of fertilizer N/P ratio by 0.8 g N/g P per decade (p< 0.05) during 1961-2013, which may have important global implication of human impacts on agroecosystem functions in the long run. Our data can serve as one of critical input drivers for regional and global assessment on agricultural productivity, crop yield, agriculture-derived greenhouse gas balance, global nutrient budget, land-to-aquatic nutrient loss, and ecosystem feedback to the climate system.

Indicador de vulnerabilidade agropecuária a extremos climáticos para o nordeste do Brasil

The effects of climate change on human societies have become the focus of many researchers for their research. Understanding weather patterns (circulation of the atmosphere, precipitation, temperature) is essences for predicting extreme weather, but analyze how these extreme events act in our society and look for ways to reduce the impact caused by these events is the great challenge. Using a concept very in the humanities and social sciences to understand these impacts and the adaptation of the society's vulnerability. The objective of this work is to develop and apply a methodology for evaluating fining scale and quantify the vulnerability of the Brazilian Northeast to climatic extremes, developing a methodology that combines aspects of vulnerability to drought, as well as socioeconomic and climatic indicators used to assess exposure, ability to adaptation and the sensitivity of geographical microregions of the region. The assessment of the susceptibility or degree of exposure to risk is the regional using the SPI (Standardized Precipitation Index) by the degree of magnitude dried (MD), the rate of precipitation such as PCD (Precipitation Concentration Degree) and PCP (Precipitation Period Concentration) helped characterize and regional climatology, these indices showed satisfactory results in the pilot study of Rio Grande do Norte to assess the degree of exposure to drought. Regarding sensitivity agricultural / livestock multivariate statistical technique to factor analysis showed acceptable results for the proposed model using data for the period 1990-1999 (P1). The application of the analysis of vulnerability considering the adaptive capacity, as the adaptive disability have almost similar results with much of the region's vulnerability to extreme south of Bahia state as a part of the semiarid region has a degree of vulnerability among moderate and mean

Degree of conversion of different composite resins photo-activated with light-emitting diode and argon ion laser

This study evaluated the degree of conversion (DC%) of one experimental and different brands of composite resins light-cured by two light sources (one LED and one argon laser). The percentage of unreacted C = C was determined from the ratio of absorbance intensities of aliphatic C = C (peak at 1637 cm−1) against internal standards before and after curing: aromatic C–C (peak at 1610 cm−1) except for P90, where %C = C bonds was given for C–O–C (883 cm−1) and C–C (1257 cm−1). ANOVA and Tukey’s test revealed no statistically significant difference among Z350 (67.17), Z250 (69.52) and experimental (66.61 ± 2.03) with LED, just among them and Evolu-X (75.51) and P90 (32.05) that showed higher and lower DC%, respectively. For the argon laser, there were no differences among Z250 (70.67), Z350 (69.60), experimental (65.66) and Evolu-X (73, 37), however a significant difference was observed for P90 (36.80), which showed lowest DC%. The light sources showed similar DC%, however the main difference was observed regarding the composite resins. The lowest DC% was observed for the argon laser. P90 showed the lowest DC% for both light-curing sources.

Evaluation of degree of conversion and hardness of dental composites photo-activated with different light guide tips

Objective: The aim of this study was to evaluate the degree of conversion and hardness of different composite resins, photo-activated for 40 s with two different light guide tips, fiber optic and polymer. Methods: Five specimens were made for each group evaluated. The percentage of unreacted carbon double bonds (% C═C) was determined from the ratio of absorbance intensities of aliphatic C═C (peak at 1637 cm−1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm−1). The Vickers hardness measurements were performed in a universal testing machine. A 50 gf load was used and the indenter with a dwell time of 30 seconds. The degree of conversion and hardness mean values were analyzed separately by ANOVA and Tukey’s test, with a significance level set at 5%. Results: The mean values of degree of conversion for the polymer and fiber optic light guide tip were statistically different (P<.001). The hardness mean values were statistically different among the light guide tips (P<.001), but also there was difference between top and bottom surfaces (P<.001). Conclusions: The results showed that the resins photo-activated with the fiber optic light guide tip promoted higher values for degree of conversion and hardness.

Sediment age, abundance of planktonic foraminifera shells, degree of their dissolution, percentage of benthic foraminifera in total foram fauna, Core GC-11, Sea of Okhotsk

Taxonomic composition and distribution of planktonic foraminifera are studied in section of Core GC-11 penetrated through Upper Quaternary sediments of the Bowers Ridge western slope, south Bering Sea. It is shown that structure of foraminiferal assemblage and productivity varied substantially during the last 32000 calendar years in response to changes in surface water temperatures and water mass circulation in the North Pacific including the Bering Sea. Productivity was maximal during the deglaciation epoch, being notably lower in Holocene and minimal at glaciation time.

The SCUBA HAlf degree extragalactic survey - III. Identification of radio and mid-infrared counterparts to submillimetre galaxies

Determining an accurate position for a submillimetre (submm) galaxy (SMG) is the crucial step that enables us to move from the basic properties of an SMG sample - source counts and 2D clustering - to an assessment of their detailed, multiwavelength properties, their contribution to the history of cosmic star formation and their links with present-day galaxy populations. In this paper, we identify robust radio and/or infrared (IR) counterparts, and hence accurate positions, for over two-thirds of the SCUBA HAlf-Degree Extragalactic Survey (SHADES) Source Catalogue, presenting optical, 24-μm and radio images of each SMG. Observed trends in identification rate have given no strong rationale for pruning the sample. Uncertainties in submm position are found to be consistent with theoretical expectations, with no evidence for significant additional sources of error. Employing the submm/radio redshift indicator, via a parametrization appropriate for radio-identified SMGs with spectroscopic redshifts, yields a median redshift of 2.8 for the radio-identified subset of SHADES, somewhat higher than the median spectroscopic redshift. We present a diagnostic colour-colour plot, exploiting Spitzer photometry, in which we identify regions commensurate with SMGs at very high redshift. Finally, we find that significantly more SMGs have multiple robust counterparts than would be expected by chance, indicative of physical associations. These multiple systems are most common amongst the brightest SMGs and are typically separated by 2-6 arcsec, similar to 15-20/sin i kpc at z~ 2, consistent with early bursts seen in merger simulations.

Is Pairing with a Relative Heritable? : Estimating Female and Male Genetic Contributions to the Degree of Biparental Inbreeding in Song Sparrows (Melospiza melodia)

We thank the Tsawout and Tseycum First Nation bands for access to Mandarte, everyone who contributed to the long-term data collection, and the European Research Council and Royal Society for funding. We thank J.D. Hadfield, P. Bijma, E. Postma, and L.F. Keller for illuminatingdiscussions. Also, L.E.B. Kruuk, R. Bonduriansky, and an anonymous reviewer provided insightful comments that improved the manuscript.

Laboratory focussed learning of core electronic engineering concepts in the first year of an honours degree programme

In common with most universities teaching electronic engineering in the UK, Aston University has seen a shift in the profile of its incoming students in recent years. The educational background of students has moved away from traditional Alevel maths and science and if anything this variation is set to increase with the introduction of engineering diplomas. Another major change to the circumstances of undergraduate students relates to the introduction of tuition fees in 1998 which has resulted in an increased likelihood of them working during term time. This may have resulted in students tending to concentrate on elements of the course that directly provide marks contributing to the degree classification. In the light of these factors a root and branch rethink of the electronic engineering degree programme structures at Aston was required. The factors taken into account during the course revision were:. Changes to the qualifications of incoming students. Changes to the background and experience of incoming students. Increase in overseas students, some with very limited practical experience. Student focus on work directly leading to marks. Modular compartmentalisation of knowledge. The need for provision of continuous feedback on performance We discuss these issues with specific reference to a 40 credit first year electronic engineering course and detail the new course structure and evaluate the effectiveness of the changes. The new approach appears to have been successful both educationally and with regards to student satisfaction. The first cohort of students from the new course will graduate in 2010 and results from student surveys relating particularly to project and design work will be presented at the conference. © 2009 K Sugden, D J Webb and R P Reeves.

Conceptual designs of multi-degree of freedom compliant parallel manipulators composed of wire-beam based compliant mechanisms

This paper proposes conceptual designs of multi-degree(s) of freedom (DOF) compliant parallel manipulators (CPMs) including 3-DOF translational CPMs and 6-DOF CPMs using a building block based pseudo-rigid-body-model (PRBM) approach. The proposed multi-DOF CPMs are composed of wire-beam based compliant mechanisms (WBBCMs) as distributed-compliance compliant building blocks (CBBs). Firstly, a comprehensive literature review for the design approaches of compliant mechanisms is conducted, and a building block based PRBM is then presented, which replaces the traditional kinematic sub-chain with an appropriate multi-DOF CBB. In order to obtain the decoupled 3-DOF translational CPMs (XYZ CPMs), two classes of kinematically decoupled 3-PPPR (P: prismatic joint, R: revolute joint) translational parallel mechanisms (TPMs) and 3-PPPRR TPMs are identified based on the type synthesis of rigid-body parallel mechanisms, and WBBCMs as the associated CBBs are further designed. Via replacing the traditional actuated P joint and the traditional passive PPR/PPRR sub-chain in each leg of the 3-DOF TPM with the counterpart CBBs (i.e. WBBCMs), a number of decoupled XYZ CPMs are obtained by appropriate arrangements. In order to obtain the decoupled 6-DOF CPMs, an orthogonally-arranged decoupled 6-PSS (S: spherical joint) parallel mechanism is first identified, and then two example 6-DOF CPMs are proposed by the building block based PRBM method. It is shown that, among these designs, two types of monolithic XYZ CPM designs with extended life have been presented.

Non-Pharmacological Approaches for Pain Management in Sickle Cell Disease: Development of a Mindfulness-Based Intervention

Background: Sickle Cell Disease (SCD) is a genetic hematological disorder that affects more than 7 million people globally (NHLBI, 2009). It is estimated that 50% of adults with SCD experience pain on most days, with 1/3 experiencing chronic pain daily (Smith et al., 2008). Persons with SCD also experience higher levels of pain catastrophizing (feelings of helplessness, pain rumination and magnification) than other chronic pain conditions, which is associated with increases in pain intensity, pain behavior, analgesic consumption, frequency and duration of hospital visits, and with reduced daily activities (Sullivan, Bishop, & Pivik, 1995; Keefe et al., 2000; Gil et al., 1992 & 1993). Therefore effective interventions are needed that can successfully be used manage pain and pain-related outcomes (e.g., pain catastrophizing) in persons with SCD. A review of the literature demonstrated limited information regarding the feasibility and efficacy of non-pharmacological approaches for pain in persons with SCD, finding an average effect size of .33 on pain reduction across measurable non-pharmacological studies. Second, a prospective study on persons with SCD that received care for a vaso-occlusive crisis (VOC; N = 95) found: (1) high levels of patient reported depression (29%) and anxiety (34%), and (2) that unemployment was significantly associated with increased frequency of acute care encounters and hospital admissions per person. Research suggests that one promising category of non-pharmacological interventions for managing both physical and affective components of pain are Mindfulness-based Interventions (MBIs; Thompson et al., 2010; Cox et al., 2013). The primary goal of this dissertation was thus to develop and test the feasibility, acceptability, and efficacy of a telephonic MBI for pain catastrophizing in persons with SCD and chronic pain.

Methods: First, a telephonic MBI was developed through an informal process that involved iterative feedback from patients, clinical experts in SCD and pain management, social workers, psychologists, and mindfulness clinicians. Through this process, relevant topics and skills were selected to adapt in each MBI session. Second, a pilot randomized controlled trial was conducted to test the feasibility, acceptability, and efficacy of the telephonic MBI for pain catastrophizing in persons with SCD and chronic pain. Acceptability and feasibility were determined by assessment of recruitment, attrition, dropout, and refusal rates (including refusal reasons), along with semi-structured interviews with nine randomly selected patients at the end of study. Participants completed assessments at baseline, Week 1, 3, and 6 to assess efficacy of the intervention on decreasing pain catastrophizing and other pain-related outcomes.

Results: A telephonic MBI is feasible and acceptable for persons with SCD and chronic pain. Seventy-eight patients with SCD and chronic pain were approached, and 76% (N = 60) were enrolled and randomized. The MBI attendance rate, approximately 57% of participants completing at least four mindfulness sessions, was deemed acceptable, and participants that received the telephonic MBI described it as acceptable, easy to access, and consume in post-intervention interviews. The amount of missing data was undesirable (MBI condition, 40%; control condition, 25%), but fell within the range of expected missing outcome data for a RCT with multiple follow-up assessments. Efficacy of the MBI on pain catastrophizing could not be determined due to small sample size and degree of missing data, but trajectory analyses conducted for the MBI condition only trended in the right direction and pain catastrophizing approached statistically significance.

Conclusion: Overall results showed that at telephonic group-based MBI is acceptable and feasible for persons with SCD and chronic pain. Though the study was not able to determine treatment efficacy nor powered to detect a statistically significant difference between conditions, participants (1) described the intervention as acceptable, and (2) the observed effect sizes for the MBI condition demonstrated large effects of the MBI on pain catastrophizing, mental health, and physical health. Replication of this MBI study with a larger sample size, active control group, and additional assessments at the end of each week (e.g., Week 1 through Week 6) is needed to determine treatment efficacy. Many lessons were learned that will guide the development of future studies including which MBI strategies were most helpful, methods to encourage continued participation, and how to improve data capture.

Does the degree of coarctation of the aorta influence wall shear stress focal heterogeneity?

The development of atherosclerosis in the aorta is associated with low and oscillatory wall shear stress for normal patients. Moreover, localized differences in wall shear stress heterogeneity have been correlated with the presence of complex plaques in the descending aorta. While it is known that coarctation of the aorta can influence indices of wall shear stress, it is unclear how the degree of narrowing influences resulting patterns. We hypothesized that the degree of coarctation would have a strong influence on focal heterogeneity of wall shear stress. To test this hypothesis, we modeled the fluid dynamics in a patient-specific aorta with varied degrees of coarctation. We first validated a massively parallel computational model against experimental results for the patient geometry and then evaluated local shear stress patterns for a range of degrees of coarctation. Wall shear stress patterns at two cross sectional slices prone to develop atherosclerotic plaques were evaluated. Levels at different focal regions were compared to the conventional measure of average circumferential shear stress to enable localized quantification of coarctation-induced shear stress alteration. We find that the coarctation degree causes highly heterogeneous changes in wall shear stress.

Degree classification and recent graduates’ ability: Is there any signalling effect?

Research across several countries has shown that degree classification (i.e. the final grade awarded to students successfully completing university) is an important determinant of graduates’ first destination outcome. Graduates leaving university with higher degree classifications have better employment opportunities and a higher likelihood of continuing education relative to those with lower degree classifications. This article investigates whether one of the reasons for this result is that employers and higher education institutions use degree classification as a signalling device for the ability that recent graduates may possess. Given the large number of applicants and the amount of time and resources typically required to assess their skills, employers and higher education institutions may decide to rely on this measure when forming beliefs about recent graduates’ abilities. Using data on two cohorts of recent graduates from a UK university, results suggest that an Upper Second degree classification may have a signalling role.