Análise geoambiental da plataforma continental Rasa Equatorial, por meio de sensoriamento remoto e dados sedimentológicos: parrachos de Rio do Fogo-RN, Brasil

In the shallow continental shelf in Northeastern Rio Grande do Norte - Brazil, important underwater geomorphological features can be found 6km from the coastline. They are coral reefs, locally known as “parrachos”. The present study aims to characterize and analyze the geomorphological feature as well as the ones of the benthic surface, and the distribution of biogenic sediments found in parrachos at Rio do Fogo and associated shallow platforms, by using remote sensing products and in situ data collections. This was made possible due to sedimentological, bathymetric and geomorphological maps elaborated from composite bands of images from the satellite sensors ETM+/Landsat-7, OLI/Landsat-8, MS/GeoEye and PAN/WordView-1, and analysis of bottom sediments samples. These maps were analyzed, integrally interpreted and validated in fieldwork, thus permitting the generation of a new geomorphological zoning of the shallow shelf in study and a geoenvironmental map of the Parrachos in Rio do Fogo. The images used were subject to Digital Image Processing techniques. All obtained data and information were stored in a Geographic Information System (GIS) and can become available to the scientific community. This shallow platform has a carbonate bottom composed mostly by algae. Collected and analyzed sediment samples can be classified as biogenic carbonatic sands, as they are composed 75% by calcareous algae, according to the found samples. The most abundant classes are green algae, red algae, nonbiogenic sediments (mineral grains), ancient algae and molluscs. At the parrachos the following was mapped: Barreta Channel, intertidal reefs, submerged reefs, the spur and grooves, the pools, the sandy bank, the bank of algae, sea grass, submerged roads and Rio do Fogo Channel. This work presents new information about geomorphology and evolution in the study area, and will be guiding future decision making in the handling and environmental management of the region

Repercussão da integração de conteúdos das disciplinas nos trabalhos finais de graduação de CAU-UFRN (2003 a 2010)

The changes in the teaching of Architecture in Brazilian Universities, from the 1990s onwards, with the upgrading of the Architecture project as an object of research and scientific knowledge and more specifically, the adoption by the Architecture and Urbanism Course (CAU) from the Federal University of Rio Grande do Norte (UFRN) of the principle of content integration of the disciplines, aroused the interest in research on issues related to the Design process and the teaching of design in this context. After 20 years of its implementation and recognized as being a major step forward in teaching the teaching/learning process, the integration is the central focus of this research, which will seek to identify changes in the teaching design and its refutation in projects developed by students at the end of their course. In general, it is understood that the need to integrate knowledge from diverse areas of Architect’s professional activity, who seeks through an exercise of summary, identify solutions to the issues involved in a project. On the assumption that the integration of content of disciplines fosters the teaching/learning of Architecture project, which can be evident in the Final Course Assignment (FCA), it becomes necessary to understand, in the light of theories of education, such as the principles of curriculum organization, such as interdisciplinarity and multidisciplinarity, transdisciplinarity and transversality are related to the term integration, is more understood and disseminated among the professors of the Architecture courses. The object of this study is consequently the relationship between the integration of subject content and Architecture projects developed by students from CAU-UFRN, in the context of Final Graduation projects (FCAs) completed in the period of duration of the Teaching Project A5-from 2003. The study has the main objective of investigating to what extent the integration of disciplinary content affects the development of the Final Assignment of UFRN, from the analysis of drawings and texts of the projects of the learners and the testimonies of teachers and undergraduate students. From a methodological point of view, the research “Architecture, Project and Knowledge Production: Academic Production – FCAs, Thesis and dissertations in PA/Brazil” carried out by the PROJETAR/UFRN team has been adopted as the basis for the construction of the analytical instruments. In order to identify aspects of their experience by various actors which were not recorded in FCA, electronic forms were applied between teachers and students, through the internet. The integration of subject content based Teaching Project of CAU-UFRN institutionalises the interdisciplinarity, organizing the curriculum by thematic semesters, in which the disciplines work the same focus and at the same site. The integrated work which derives from there tries to articulate the content of each discipline of the period and represents a general practice and has been evaluated by teachers and students, and considered as a facilitator of the teaching/learning process. The analysis of the data collected from the textual content and graphic of the sample of FCAs of CAU-UFRN suggests that the content of the various areas of knowledge are assimilated by the student and used as a resource for the design and development of Architecture projects. In other words, there is in the end product of the students record of the integration of content, whether in speech or in drawing, reaffirming the importance of the convergence of various knowledge in the Architectonic project. However, the integration of content from the point of view of their articulation and operationalization, which involves teachers and students in the same period, has as a condition sine qua non for the success of this educational principle, the provision of these to work as part of a team, for the dialogic practice, which creates areas of intersection not only between disciplines, but between the knowledge of each of the participants.

Zoneamento agroclimático da palma forrageira (Opuntia sp.) para o estado da Paraíba

The cactus pear has become over the years an important forage alternative for brazilian semiarid region, especially during long periods of drought. Despite its importance for agriculture, its cultivation has dispensed basic crop practices and fundamentals technical-scientific basis about its climatic requirements. Thus, the main objective of this study was to elaborate the agroclimatic zoning of cactus pear (Opuntia sp.) for the state of Paraíba. The agroclimatic zoning of cactus pear was based on climatic indicators outlined in the literature and climatological data of precipitation and temperature (mean, maximum, and minimum) from 97 locations in the state of Paraíba. According to the results, the region of ‘Borborema’ is the most favorable for the cultivation of cactus pear. The regions of ‘Agreste’, ‘Sertão’, and coastal part of Litoral may be used but with restrictions. However, the cultivation of cactus pear is recommended throughout the state of Paraíba, except the coastal part of the Litoral and the region around Areia. In both cases, the inability is due to excessive precipitation.

Integração e interdisciplinaridade no processo ensino/aprendizagem de projeto: o curso de Arquitetura e Urbanismo da Universidade Potiguar de Mossoró-RN

Training in Architecture and Urbanism with its general characteristic involves, in its nature, knowledge of various areas (technology, theory, history, representation, and design), being the space of design conception that place where the synthesis of this knowledge is reflected more clearly. We believe that the integrated work in the architectural curriculum can provide an overview of the project, thus contributing to better training of the architect. This research aims to reflect on the role of integration and interdisciplinary in teaching architectural design. This theme has been work recurrently by critics in the teaching area of project and events of the area as the seminars of the Projetar, highlighted by several authors to search integration as an essential pedagogical approach to design education. The work aims to contribute to reflection and awareness of those involved on the importance of integration in the architectural course of project processes. For this, we analyzed the potential and limits of this process in Architecture and Urbanism Course (CAU) at the Universidade Potiguar (UNP) Mossoró, which has the integration and interdisciplinary recorded since the Pedagogical Project of the Course. This analysis will be performed by observing the development of “interdisciplinary work” in the fifth term during the first half of 2014.1. This research concerns an exploratory qualitative study that aims to investigate specific issues on the teaching/learning architecture project and the integration in architecture courses, following a non-participant observation in architectural design classes in the fifth term of CAU/UnP/ Mossoró, and analysis of final products, which would be the work of the last unit of the semester, called “Interdisciplinary work”. Questionnaires for the teachers who participated in the process has been apply via email and analyzed. Reflection supports several other already carried out to identify the difficulties inherent in applying these principles satisfactorily. Noting, however, that interdisciplinarity, in fact, it goes beyond integration and is even more difficult to achieve. In addition to an educational project that incorporates these principles, such as the course of Architecture and Urbanism of the UNP-Mossoró, full adhesion it is necessary by the faculty and students of this teaching philosophy.

Integração e interdisciplinaridade no processo ensino/aprendizagem de projeto: o curso de Arquitetura e Urbanismo da Universidade Potiguar de Mossoró-RN

Training in Architecture and Urbanism with its general characteristic involves, in its nature, knowledge of various areas (technology, theory, history, representation, and design), being the space of design conception that place where the synthesis of this knowledge is reflected more clearly. We believe that the integrated work in the architectural curriculum can provide an overview of the project, thus contributing to better training of the architect. This research aims to reflect on the role of integration and interdisciplinary in teaching architectural design. This theme has been work recurrently by critics in the teaching area of project and events of the area as the seminars of the Projetar, highlighted by several authors to search integration as an essential pedagogical approach to design education. The work aims to contribute to reflection and awareness of those involved on the importance of integration in the architectural course of project processes. For this, we analyzed the potential and limits of this process in Architecture and Urbanism Course (CAU) at the Universidade Potiguar (UNP) Mossoró, which has the integration and interdisciplinary recorded since the Pedagogical Project of the Course. This analysis will be performed by observing the development of “interdisciplinary work” in the fifth term during the first half of 2014.1. This research concerns an exploratory qualitative study that aims to investigate specific issues on the teaching/learning architecture project and the integration in architecture courses, following a non-participant observation in architectural design classes in the fifth term of CAU/UnP/ Mossoró, and analysis of final products, which would be the work of the last unit of the semester, called “Interdisciplinary work”. Questionnaires for the teachers who participated in the process has been apply via email and analyzed. Reflection supports several other already carried out to identify the difficulties inherent in applying these principles satisfactorily. Noting, however, that interdisciplinarity, in fact, it goes beyond integration and is even more difficult to achieve. In addition to an educational project that incorporates these principles, such as the course of Architecture and Urbanism of the UNP-Mossoró, full adhesion it is necessary by the faculty and students of this teaching philosophy.

Petrologia e geologia estrutural do plutão granítico Barcelona, província Borborema, NE do Brasil

The Dissertation aimed to advance the geological knowledge of the Barcelona Granitic Pluton (BGP). This body is located in the eastern portion of the Rio Grande do Norte Domain (RND), within the São José do Campestre subdomain (SJC), NE of the Borborema Province. The main goal was to understand the geological evolution of the rocks of the pluton and the tectonic setting of magma generation and its emplacement. The BGP has an assumed Ediacaran age and outcropping area of approximately 260 km2, being composed of three varied petrographic/textural facies: (a) porphyritic biotite monzogranite; (b) dykes and sheets of biotite microgranite; (c) dioritic to quartz-dioritic enclaves. The rocks of the BGP have the following structures: (i) a NE-SW and NW-SE directed magmatic fabric (Sγ), accompanied by a magmatic lineation (Lγ) with gentle dip to NE-SW and NW-SE. In the southern portion, there is the concentric pattern of this foliation with medium to high dip, and (ii) a solid state foliation, in part mylonitic (S3+), mainly on the eastern edge with slightly plunging to west. The integration of structural and gravity data permitted to interpret the emplacement of the BGP as controlled by the transcurrent shear zones systems Lajes Pintadas (LPSZ) and Sítio Novo (SNSZ), both of dextral strike-slip kinematics. Mineral chemistry data show that the amphibole form the porphyritic biotite monzogranite facies is hastingsite with moderate Mg / (Mg + Fe) ratios, indicating crystallization under moderate to high ƒO2 and cristallization pressure of around 5.0-6.0 kbar. The biotite tends to be slightly richer in annite molecule and plots in the transitional field from primary biotite to reequilibrated biotite. In discriminant diagrams of magmatic series, the biotite behave like those of subalkaline affinity, consistent with the potassium calc-alkaline / sub-alkaline geochemical affinity of the hosting rock. The opaque minerals are primarily magnetite, with some crystals martitized to hematite indicating relatively oxidizing conditions during magma evolution that originated the BGP. Zoning in plagioclase, K-feldspar and allanite crystals suggest fractional crystallization process. Lithogeochemical data suggest that the facies described for the BGP have similar magma source, usually plotting in the fields and trends of the subalkaline / high potassium calc-alkaline series.

A busca por uma política nacional dos biocombustíveis como tutela do direito fundamental ao meio ambiente : acautelamento e avaliação de riscos

The work is to demonstrate the scope of modern-day major regulatory provisions and the policies implemented to adoption of biofuels in the national energy matrix. The adoption of biofuels as an alternative to fossil fuels, is based on the realization of the fundamental right to an ecologically balanced environment mitigating hazards and environmental hazards arising from a postmodern society. However, the change in the Brazilian energy matrix observe the precepts of certain environmental principles to essentially environmental preservation The proposed Environmental rule of law is founded on the realization of the right (duty) key to an ecologically balanced environment for sustainable development. Thus, it is up to the State, in addition to considering the dangers and risks fruits of government decisions, present the possible instruments to mitigate the irreversible environmental damage to the environment. The management of environmental risks present in the ideals of an Environmental rule of law, plays an important role in the preservation and economic development, using, therefore, of acautelatórios legal instruments, such as environmental licensing and the ecological-economic zoning, measures adopted in the light of the principles of precaution and preservation. The adoption of research in the environmental field, improvement and development of environmental technology, building a system to observe ecological changes, imposition of environmental policy objectives to be achieved in the medium and long term and systematization of organizations plan a protection policy environmental, are essential measures to control possible environmental risks and damage guided by the aforementioned environmental principles. Thus, it will be used the inductive method of approach, starting from the analysis of the new perspective of Environmental rule of law and the implementation of biofuels in the context of a post-modern society, marked by uncertainty and the risk of damage, from the study of the principles of caution, maintaining and cautionary measures in mitigating the hazards and potential risks.

Geochemistry of ODP Hole 176-735B igneous and hydrothermal veins

During Legs 118 and 176, Ocean Drilling Program Hole 735B, located on Atlantis Bank on the Southwest Indian Ridge, was drilled to a total depth of 1508 meters below seafloor (mbsf) with nearly 87% recovery. The recovered core provides a unique section of oceanic Layer 3 produced at an ultraslow spreading ridge. Metamorphism and alteration are extensive in the section but decrease markedly downward. Both magmatic and hydrothermal veins are present in the core, and these were active conduits for melt and fluid in the crust. We have identified seven major types of veins in the core: felsic and plagioclase rich, plagioclase + amphibole, amphibole, diopside and diopside + plagioclase, smectite ± prehnite ± carbonate, zeolite ± prehnite ± carbonate, and carbonate. A few epidote and chlorite veins are also present but are volumetrically insignificant. Amphibole veins are most abundant in the upper 50 m of the core and disappear entirely below 520 mbsf. Felsic and plagioclase ± amphibole ± diopside veins dominate between ~50 and 800 mbsf, and low-temperature smectite, zeolite, and prehnite veins are present in the lower 500 m of the core. Carbonate veinlets are randomly present throughout the core but are most abundant in the lower portions. The amphibole veins are closely associated with zones of intense crystal plastic deformation formed at the brittle/ductile boundary at temperatures above 700°C. The felsic and plagioclase-rich veins were formed originally by late magmatic fluids at temperatures above 800°C, but nearly all of these have been overprinted by intense hydrothermal alteration at temperatures between 300° and 600°C. The zeolite, prehnite, and smectite veins formed at temperatures <100°C. The chemistry of the felsic veins closely reflects their dominant minerals, chiefly plagioclase and amphibole. The plagioclase is highly zoned with cores of calcic andesine and rims of sodic oligoclase or albite. In the felsic veins the amphibole ranges from magnesio-hornblende to actinolite or ferro-actinolite, whereas in the monomineralic amphibole veins it is largely edenite and magnesio-hornblende. Diopside has a very narrow range of composition but does exhibit some zoning in Fe and Mg. The felsic and plagioclase-rich veins were originally intruded during brittle fracture at the ridge crest. The monomineralic amphibole veins also formed near the ridge axis during detachment faulting at a time of low magmatic activity. The overprinting of the igneous veins and the formation of the hydrothermal veins occurred as the crustal section migrated across the floor of the rift valley over a period of ~500,000 yr. The late-stage, low-temperature veins were deposited as the section migrated out of the rift valley and into the transverse ridge along the margin of the fracture zone.

A Mineralogical Study of a Dravitic Tourmaline from the Grenville Province

Tourmaline from a gem-quality deposit in the Grenville province has been studied with X-ray diffraction, visible-near infrared spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, electron microprobe and optical measurements. The tourmaline is found within tremolite-rich calc-silicate pods hosted in marble of the Central Metasedimentary Belt. The crystals are greenish-greyish-brown and have yielded facetable material up to 2.09 carats in size. Using the classification of Henry et al. 2011 the tourmaline is classified as a dravite, with a representative formula shown to be (Na0.73Ca0.2380.032)(Mg2+2.913Fe2+0.057Ti4+0.030) (Al3+5.787Fe3+0.017Mg2+0.14)(Si6.013O18)(BO3)3(OH)3((OH,O)0.907F0.093). Rietveld analysis of powder diffraction data gives a = 15.9436(8) Å, c = 7.2126(7) Å and a unit cell volume of 1587.8 Å3. A polished thin section was cut perpendicular to the c-axis of one tourmaline crystal, which showed zoning from a dark brown core into a lighter rim into a thin darker rim and back into lighter zonation. Through the geochemical data, three key stages of crystal growth can be seen within this thin section. The first is the core stage which occurs from the dark core to the first colourless zone; the second is from this colourless zone increasing in brown colour to the outer limit before a sudden absence of colour is noted; the third is a sharp change from the end of the second and is entirely colourless. These events are the result of metamorphism and hydrothermal fluids resulting from nearby felsic intrusive plutons. Scanning electron microscope, and electron microprobe traverses across this cross-section revealed that the green colour is the result of iron present throughout the system while the brown colour is correlated with titanium content. Crystal inclusions in the tourmaline of chlorapatite, and zircon were identified by petrographic analysis and confirmed using scanning electron microscope data and occur within the third stage of formation.

On the microstructure, growth pattern and original porosity of belemnite rostra: insights from calcitic Jurassic belemnites

Calcitic belemnite rostra are usually employed to perform paleoenvironmental studies based on geochemical data. However, several questions, such as their original porosity and microstructure, remain open, despite they are essential to make accurate interpretations based on geochemical analyses.This paper revisits and enlightens some of these questions. Petrographic data demonstrate that calcite crystals of the rostrum solidum of belemnites grow from spherulites that successively develop along the apical line, resulting in a “regular spherulithic prismatic” microstructure. Radially arranged calcite crystals emerge and diverge from the spherulites: towards the apex, crystals grow until a new spherulite is formed; towards the external walls of the rostrum, the crystals become progressively bigger and prismatic. Adjacent crystals slightly vary in their c-axis orientation, resulting in undulose extinction. Concentric growth layering develops at different scales and is superimposed and traversed by a radial pattern, which results in the micro-fibrous texture that is observed in the calcite crystals in the rostra.Petrographic data demonstrate that single calcite crystals in the rostra have a composite nature, which strongly suggests that the belemnite rostra were originally porous. Single crystals consistently comprise two distinct zones or sectors in optical continuity: 1) the inner zone is fluorescent, has relatively low optical relief under transmitted light (TL) microscopy, a dark-grey color under backscatter electron microscopy (BSEM), a commonly triangular shape, a “patchy” appearance and relatively high Mg and Na contents; 2) the outer sector is non-fluorescent, has relatively high optical relief under TL, a light-grey color under BSEM and low Mg and Na contents. The inner and fluorescent sectors are interpreted to have formed first as a product of biologically controlled mineralization during belemnite skeletal growth and the non-fluorescent outer sectors as overgrowths of the former, filling the intra- and inter-crystalline porosity. This question has important implications for making paleoenvironmental and/or paleoclimatic interpretations based on geochemical analyses of belemnite rostra.Finally, the petrographic features of composite calcite crystals in the rostra also suggest the non-classical crystallization of belemnite rostra, as previously suggested by other authors.

Territorial administrative reorganization as a strategy for optimizing the structure of local government

Through the tough economic and social situation and the lack of values that has been experienced in recent years, local governments especially in Greece, Portugal, Italy and Spain have been forced to strongly consider the structure and size of their public sector. Despite some initiative to reduce the number of municipalities and provinces, little substantive progress has been made in improving the management of the local public Administration during this crisis. In this study a territorial administrative reorganization is proposed as a strategy to optimize the structure of local government, analyzing the Spanish situation in general, and an autonomous community in particular.

The Buksh Museum of Hobby-Craft

This article describes the last of three architecture projects carried out over two years’ PhD research in the Indian city of Agra, completed in 2014. The projects aimed to expose ways that residents in the city’s historical Tajganj neighbourhoods had, over four centuries, constructed an urban topography that was meaningful to them. The final project the Buksh Museum of Hobby-Craft explored ways in which re-establishing a civic role for one building could enable those involved to reimagine the potential of this neglected urban district. This was done through assembling temporary additions to a ruined building.

The project was carried out with a local non-governmental organisation (NGO) and ran parallel to an urban regeneration scheme for Tajganj with which this NGO was involved. Several groups with different urban specialisms were involved in this scheme and were committed to fielding their own set of objectives within it: often these goals conflicted. The research project, isolated from these objectives, allowed participants to engage with the conflicting value sets in play, and explore ways of mediating between them without compromising any groups’ role in the regeneration scheme itself.

Sound Art and Public Engagement in the Built Environment: Reflections from an Architecture Center

This article explores the deployment of sound in architectural-curatorial and community engagement contexts through the work of PLACE, a multidisciplinary not-for-profit architecture center in Belfast, Northern Ireland. The author, who worked with PLACE and contributed to the projects discussed here, contextualizes architecture centers and their relationship with sound before examining the specific case of sound and sound art in Northern Ireland and case studies of projects delivered by PLACE. Specifically, the article evaluates two sound installation artworks and three community engagement projects for young audiences. As a means of curating urbanism and architecture, sound-art-as-public-art affords useful strategies to examine, describe or critique the environment as alternatives to traditional architecture exhibition formats. Sound’s temporality and materiality allow sound art works to exist as temporary sculptural interventions in the urban sphere, with attendant implications for public art procurement and urban acoustics. Rich territories of engagement are opened when using sound in a community participatory context.

Walking the Street: No more motorways for Belfast

This article explores how the spatial qualities and diversity of one of Belfast’s main arteries, North Street/Peter’s Hill, was transformed by urban planning decisions throughout the twentieth century. It looks specifically at how a car dominated planning system contributed to the deterioration of the street fabric. The analysis of historic maps and plans enables to point out how the function and dimensions of the buildings, based on ideas of plot-based urbanism, have contributed to the vibrancy of North Street/Peter’s Hill, and how the more recent transformation of those functions and dimensions damaged these streets. The article acknowledges that streets are made of the social and cultural context in which they exist, while their form and function is instrumental to their embedded public life.

Session organiser/chair: The architecture of coal and other energies

Coal ignited the industrial revolution. An organic sedimentary rock that energized the globe, transforming cities, landscapes and societies for generations, the importance of ‘King Coal’ to the development and consolidation of modernity has been well-recognised. And yet, as a critical factor in the production of modern architecture, coal—as well as other forms of energy—has been mostly overlooked.

From Appalachia to Lanarkshire, from the pits of northern France, Belgium and the Ruhr valley, to the monumental opencast excavations of Russia, China, Africa and Australia, mining operations have altered the immediate social and physical landscapes of coal-rich areas. But in contrast to its own underground conditions of production, the winning of coal, especially in the twentieth-century, has produced conspicuously enlightened and humane approaches to architecture and urbanism. In the twentieth century, educational buildings, holiday camps, hospitals, swimming pools, convalescent homes and housing prevailed alongside model collieries in mining settlements and areas connected to them. In 1930s Britain, pit head baths—funded by a levy on each ton produced—were often built in the International Style. Many won praise for architectural merit, appearing in Nicholas Pevsner’s guides to the buildings of England alongside cathedrals, village manors and Masonic halls as testimonies to the public good.

The deep relationships between coal and modernity, and the expressions of architecture it has articulated, in the collieries from which it was hewn, the landscape and towns it shaped, and the power stations and other infrastructure where it was used, offer innumerable opportunities to explore how coal produced architectures which embodied and expressed both social and technological conditions. While proposals on coal are preferred, we also welcome papers that interrogate the complexity, heterogeneity and hybridity of other forms of energy production and how these have also interceded into architectural form at a range of scales.